Straight phase separation of prostaglandin methyl esters on lipophilic gels

A series of straight phase gel chromatography systems have been developed for the separation of prostaglandin methyl esters. Using the methyl esters of prostaglandins B₂, E₂, F₂α and F₂β, the basic relationships between elution volume and the polarities of the gel, the solvent system (heptane-chloroform mixtures), and the prostaglandin have been determined. The separation of prostaglandin methyl esters with slight differences in structure has been demonstrated. Examples include oxo and hydroxy prostaglandins, hydroxy epimers, double bond isomers, prostaglandins of varying α- and ω-chain length, and 1- and 2- (5,6 cis double bond) series prostaglandins. In view of the general advantages of liquid-gel chromatography, it is suggested that these systems may be useful for isolation and purification in a number of areas in the prostaglandin field.     

The selective enzymatic synthesis of lipophilic esters of swainsonine.

The potent and specific inhibitor of Golgi alpha-mannosidase II, swainsonine (SW) has been isolated in high yield from Swainsona procumbens and derivatised by regiospecific enzymatic reactions. In this study the regioselectivity of three commercially available enzymes, subtilisin Carlsberg, porcine pancreatic lipase (PPL) and Candida cylindracea lipase was determined for the acylation of swainsonine in predominantly anhydrous organic medium. The use of subtilisin in pyridine facilitated the single step synthesis of 2-O-butyryl-SW in a 23% yield, whilst catalysis by PPL in tetrahydrofuran gave 2-O-butyryl-SW (6%) and 1,2-di-O-butyryl-SW (31%).     

Tailored cellulose esters: synthesis and structure determination

A broad variety of cellulose esters with complex and sensitive (against hydrolysis and light) structures was synthesized homogeneously in N,N-dimethylacetamide (DMAc)/LiCl and in the new solvent dimethyl sulfoxide (DMSO)/tetrabutylammonium fluoride (TBAF) via in situ activation of the carboxylic acids with N,N'-carbonyldiimidazole (CDI). New esters of chiral (-)-menthyloxyacetic acid, of unsaturated 3-(2-furyl)-acrylcarboxylic- and furane-2-carboxylic acid, acids with crownether moieties (4'-carboxybenzo-18-crown-6), and with carboxymethyl-beta-cyclodextrin were accessible in a one-pot reaction. Because of the mild conditions and the efficiency of the reaction via imidazolides, very pure and highly functionalized cellulose derivatives were obtained up to a degree of substitution of 2.5 possessing a degree of polymerization in the range of the starting cellulose. Structure determination was carried out by different one- and two-dimensional NMR techniques confirming the high purity of the esters and a pronounced regioselectivity for the primary OH function. The structural features, the purity, the solubility, and the film forming properties, make these materials desired products for the preparation of membranes with tailored separation characteristics.     

Preparation of cellulose films from solution of bacterial cellulose in NMMO

Bacterial cellulose (BC) was dissolved in N-methylmorpholine N-oxide (NMMO) to prepare regenerated BC films (RBC) with phase inversion. The solubility of BC, supermolecule on structure, morphology, thermal and physical properties of the films were investigated by Fourier transform infrared spectroscopy (FT-IR), solid-state cross polarization/magic angle spinning ¹³C nuclear magnetic resonance (CP/MAS ¹³C NMR), wide-angle X-ray diffraction (WAXD), scanning electron microscope (SEM), and thermogravimetric analysis (TGA). The investigation suggested BC was dissolved completely in NMMO. From the C₆ signal shifts to the amorphous area, the crystallinity of materials decreased from 79.20% to 38.17%, and the transformation from cellulose I to II occurred. It was also found that the banded structure of the native materials was replaced by homogeneous and densified sections, so RBC films had better mechanical and barrier properties, and do thermal stability was similar to that of the native BC.     

Preparation and characterization of novel oxidized cellulose acetate methyl esters

In this paper, we report the preparation of oxidized cellulose acetate methyl esters (OCAM) from OCA (OC14A: carboxylic acid content 10.6% (w/w), degree of acetyl group substitution: 1.89; OC21A: carboxylic acid content 15.7% (w/w), degree of acetyl group substitution: 1.70) by treatment with methanol at room temperature using 4-dimethylaminopyridine (DMAP) as a catalyst and dicyclohexylcarbodiimide (DCC) as a coupling agent. The new polymers were characterized by Fourier-transform infrared (FT-IR) and (1)H and (13)C nuclear magnetic resonance spectroscopies, carboxylic acid content determination, moisture sorption isotherms, intrinsic viscosity, and powder X-ray diffractometry. The new polymers are amorphous powders. It is practically insoluble in water but show solubility in a range of organic solvents.     

TBAF and cellulose esters: unexpected deacylation with unexpected regioselectivity

Tetrabutylammonium fluoride has been found to catalyze the deacylation of cellulose esters. More surprisingly, the deacylation is highly regioselective. Even more remarkably, in contrast with the C-6 regioselectivity of other reactions of cellulose and its derivatives, this deacylation shows substantial selectivity for the removal of the acyl groups from the esters of the secondary alcohols at C-2 and C-3, affording cellulose-6-O-esters with high regioselectivity by a simple one-step process employing no protective groups.     

Efficient approach to design stable water-dispersible nanoparticles of hydrophobic cellulose esters

Commercially prepared cellulose acetate, cellulose acetate propionate, -butyrate, and -phthalate as well as cellulose acetates prepared in the laboratory scale with varying degree of substitution (DS) self-assemble into regular nanoparticles, ranging in size from 86 to 368 nm, by using two different techniques of nanoprecipitation. Dialysis of polymers dissolved in N,N-dimethylacetamide results in the formation of regular nanospheres whereas the preparation in acetone by successive adding of water leads to bean-shaped particles in the nanoscale. One criterion for nanoprecipitation is the existence of dilute polymer solutions. Furthermore, the formation of nanoparticles strongly depends on DS and distribution of the substituents. Concerning this issue, quantitative (13)C NMR spectroscopy was applied for detailed structure characterization of selected cellulose acetates. The stability of the nanoparticle suspensions in the physiological pH range was observed by zeta potential measurements.     

New results concerning the behavior of cellulose acetate in solutions and films by means of CD measurements

Cellulose acetate (DS = 2.45) was extensively investigated by Circular Dichroism (CD) in acetonitrile and dioxane. We found great differences between the CD spectra of a 1 wt % acetonitrile solution and the corresponding dioxane solution of cellulose acetate (CA) indicating that the macromolecules exist in those solutions in different molecular arrangements (e.g., persistence length, solvatation shell). The resulting morphologies could be transformed reversibly into each other, as we found by measuring the CA in mixtures of both solvents. Solid CA films show discernible CD spectra depending on the solvent they were evaporated from. In this way, we prepared solid films of the same polysaccharide owning different chiral properties. Furthermore, changes in the spectra occurred with increasing CA concentration. Basing upon our findings, some general statements concerning the polymer behavior of CA are possible. © 1999 John Wiley & Sons, Inc. Biopoly 50: 163–166, 1999     

Nonleaching antimicrobial films prepared from surface-modified microfibrillated cellulose

We have prepared potentially permanent antimicrobial films based on surface-modified microfibrillated cellulose (MFC). MFC, obtained by disintegration of bleached softwood sulfite pulp in a homogenizer, was grafted with the quaternary ammonium compound octadecyldimethyl(3-trimethoxysilylpropyl)ammonium chloride (ODDMAC) by a simple adsorption-curing process. Films prepared from the ODDMAC-modified MFC were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) and tested for antibacterial activity against the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacteria Escherichia coli and Pseudomonas aeruginosa. The films showed substantial antibacterial capacity even at very low concentrations of antimicrobial agent immobilized on the surface. A zone of inhibition test demonstrated that no ODDMAC diffused into the surroundings, verifying that the films were indeed of the nonleaching type.     

Cholesteric order in gels and films of regenerated cellulose

Congo red bound to regenerated cellulose in highly swollen gel films formed by slow precipitation from LiCl/N,N-dimethylacetamide solution exhibits induced optical activity. The induced CD band of the dye vanishes when these films are dried under uniaxial stress, indicating that the effect is structural in origin and not simply due to association of dye with chiral centers on the cellulose chain. Cellulose was also regenerated from cellulose acetate films, cast both from isotropic and cholesteric solution, by deacetylation in aqueous ammonia. Congo red bound to cellulose regenerated from cholesteric cellulose acetate exhibits an induced CD band similar to that obtained for films precipitated from LiCl/DMAC solution. The CD spectrum of Congo red in cellulose films regenerated from isotropic cellulose acetate is featureless. These observations indicate that cellulose adopts cholesteric order on slow precipitation from solution.     

Structure and properties of hydroxyapatite/cellulose nanocomposite films

The aim of this study was to develop a new inorganic-organic hybrid film. Nanohydroxyapaptite (nHAP) particles as the inorganic phase was mixed with cellulose in 7 wt.% NaOH/12 wt.% urea aqueous solution with cooling to prepare a blend solution, and then inorganic-organic hybrid films were fabricated by coagulating with Na₂SO₄ aqueous solution. The structure and properties of the hybrid films were characterized by high resolution transmitting electron microscopy (HRTEM), field emission scanning electron microscopy (FESEM), thermo-gravimetric analysis (TGA), Fourier transform infra-red (FT-IR) spectra, wide angle X-ray diffraction (WAXD) and tensile testing. The results revealed that the HAP nanoparticles with mean diameter of about 30 nm were uniformly dispersed and well immobilized in the hybrid film as a result of the role of the nano-and micropores in the cellulose substrate. A strong interaction existed between HAP and cellulose matrix, and their thermal stability and mechanical strength were improved as a result of good miscibility. Furthermore, the results of 293T cell viability assay indicated that the HAP/cellulose films had excellent biocompatibility and safety, showing potential applications in biomaterials.     

Chiral discrimination with regioselectively substituted cellulose esters as chiral stationary phases

Four kinds of cellulose derivatives, including two regioselectively substituted cellulose esters (6-O-acetyl-2,3-di-O-benzoyl cellulose and 2,3-di-O-acetyl-6-O-benzoyl cellulose), were synthesized so that the effects of their functional group distribution on their chiral discrimination ability could be examined. The degree of substitution by functional groups appeared to have a critical effect on the separation in most cases, but the type of the functional group at the C-6 position also significantly influenced chiral discrimination when a series of neutral arylalcohol derivatives were used as racemates. Copyright 2000 Wiley-Liss, Inc.     

Hydrophobic esters of cellulose: properties and applications in biochemical technology.

We have investigated the utility for enzyme immobilization of several hydrophobic cellulose esters, as a function of solvent composition, extent of esterification, and enzyme. Phenoxyacetyl cellulose was also used for immobilization of rat liver microsomes, hydrophobic chromatography of proteins, and removal of Triton X-100 from protein solutions. Phenoxyacetyl groups esterified to cellulose were much less subject to enzymatic hydrolysis than soluble phenoxyacetyl esters.     

Preparation and characterization of cellulose/chitosan blend films

Cellulose and chitosan were mixed in N-methylmorpholine-N-oxide (NMMO) and heated to 100 °C, and then were processed under a pressure of 70 kg/cm² exerted by a compression molding machine at 100 °C for 8 min. As a result, transparent orange viscose films were obtained. After rinsing with deionized water and drying transparent yellowish blend films were obtained. Scanning electron microscope (SEM) indicated that when the chitosan content in the blend increased up to 3% the surface structure became smoother, but the film containing 5% (w/w) chitosan, became coarse again probably due to phase separation. Tensile strength test results were consistant with this. Antibacterial assessment proved that addition of chitosan to the films results in slight antibacterial properties. The halo zone test confirmed that the blend films made in this research have non-diffusible antibacterial properties.     

Production of bioactive cellulose films reconstituted from ionic liquids

A new method for introducing enzymes into cellulosic matrixes which can be formed into membranes, films, or beads has been developed using a cellulose-in-ionic-liquid dissolution and regeneration process. Initial results on the formation of thin cellulose films incorporating dispersed laccase indicate that active enzyme-encapsulated films can be prepared using this methodology and that precoating the enzyme with a second, hydrophobic ionic liquid prior to dispersion in the cellulose/ionic liquid solution can provide an increase in enzyme activity relative to that of untreated films, presumably by providing a stabilizing microenvironment for the enzyme.     

Novel cellulose derivatives. Part VI. Preparation and thermal analysis of two novel cellulose esters with fluorine-containing substituents

Two novel cellulose esters were prepared with fluorine (F)-containing substituents using homogeneous phase reaction chemistry in DMAc/LiCl. The partially substituted derivatives and their corresponding perpropionates proved to be thermoplastic polymers. The 2,2-difluoroethoxy and 2,2,3,3,4,4,5,5-octafluoropentoxy substituents were easily identified by ¹H- and ¹⁹F-NMR spectroscopy without disclosing their precise location on the anhydroglucose unit. Thermal analysis revealed modest or no crystallinity; glass transition temperatures between 53 and 113°C; and improved thermal stability as compared to their F-free counterparts.     

High performance edible nanocomposite films containing bacterial cellulose nanocrystals

Bacterial cellulose obtained from Gluconacetobacter xylinus in the form of long fibers were acid hydrolyzed under controlled conditions to obtain cellulose nanocrystals. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) confirmed the formation of rod like cellulose nanocrystals having an average diameter and length of 20 ± 5 nm and 290 ± 130 nm respectively. These nanocrystals were used to prepare gelatin nanocomposite films and characterized for elucidating its performance. The formation of percolated networks of cellulose nanocrystals within gelatin matrix resulted in improving the mechanical properties of nanocomposites. The moisture sorption and water vapor permeability (WVP) studies revealed that the addition of cellulose nanocrystals reduced the moisture affinity of gelatin, which is very favorable for edible packaging applications. Results of this study demonstrated the use of bacterial cellulose nanocrystals (BCNCs) in the fabrication of edible, biodegradable and high-performance nanocomposite films for food packaging applications at relatively low cost.     

TBAF-catalyzed deacylation of cellulose esters: Reaction scope and influence of reaction parameters

In order to expand its utility and understand how to carry it out most efficiently, the scope of the highly regioselective, tetrabutylammonium fluoride (TBAF) catalyzed deacylation of cellulose acetates has been investigated, including the influence of key process parameters: solvent, temperature, and water content. Reactions in DMSO, THF, MEK and acetone afforded similar extents of deacylation and regioselectivity. Reaction with TBAF in DMSO at 50 °C for 18 h was the most efficient process providing regioselective deacylation at O-2/3. All results were consistent with our previous mechanistic proposals. Furthermore, we demonstrate that TBAF-catalyzed deacylation is also effective and regioselective with cellulose acetate, butyrate, and hexanoate triesters, and even with a cellulose ester devoid of alpha protons, cellulose tribenzoate. These reactions displayed regioselectivity for deacylation at O-2/3 similar to that observed earlier with cellulose acetate (DS 2.4).     

Study of binding protein-ligand interaction by ammonium sulfate-assisted adsorption on cellulose esters filters

A technique for the study of neutral carbohydrate binding protein-ligand interaction is described in this report. It is based on filtration on cellulose esters filters of a mixture of the binding protein and the radioactive ligand, following a treatment of this mixture with ammonium sulfate; the technique is described for the galactose binding protein and for the maltose binding protein of Escherichia coli. For the galactose binding protein, an ammonium sulfate concentration far below that required for precipitation of the protein is sufficient to promote an almost complete retention of the protein on the filters. Furthermore, the addition of ammonium sulfate does not modify the amount of preexisting binding protein-ligand complex, and, in much less than one second, leads to a conformation of the protein-ligand complex which does not allow further ligand binding or dissociation. Hence, the technique is not only very useful for the detection of binding proteins in crude extracts and during purification procedures, it is also of value in the determination of the kinetic parameters of protein-ligand interactions.