Comparison of Fungal Laccases and Redox Mediators in Oxidation of a Nonphenolic Lignin Model Compound

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3,4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both k_cat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect k_cat and the oxidation rate of dimer I.     

Molecular docking and dynamics simulation analyses unraveling the differential enzymatic catalysis by plant and fungal laccases with respect to lignin biosynthesis and degradation

Laccase, widely distributed in bacteria, fungi, and plants, catalyzes the oxidation of wide range of compounds. With regards to one of the important physiological functions, plant laccases are considered to catalyze lignin biosynthesis while fungal laccases are considered for lignin degradation. The present study was undertaken to explain this dual function of laccases using in-silico molecular docking and dynamics simulation approaches. Modeling and superimposition analyses of one each representative of plant and fungal laccases, namely, Populus trichocarpa and Trametes versicolor, respectively, revealed low level of similarity in the folding of two laccases at 3D levels. Docking analyses revealed significantly higher binding efficiency for lignin model compounds, in proportion to their size, for fungal laccase as compared to that of plant laccase. Residues interacting with the model compounds at the respective enzyme active sites were found to be in conformity with their role in lignin biosynthesis and degradation. Molecular dynamics simulation analyses for the stability of docked complexes of plant and fungal laccases with lignin model compounds revealed that tetrameric lignin model compound remains attached to the active site of fungal laccase throughout the simulation period, while it protrudes outwards from the active site of plant laccase. Stability of these complexes was further analyzed on the basis of binding energy which revealed significantly higher stability of fungal laccase with tetrameric compound than that of plant. The overall data suggested a situation favorable for the degradation of lignin polymer by fungal laccase while its synthesis by plant laccase.     

Comparison of fungal laccases and redox mediators in oxidation of a nonphenolic lignin model compound.

Several fungal laccases have been compared for the oxidation of a nonphenolic lignin dimer, 1-(3, 4-dimethoxyphenyl)-2-(2-methoxyphenoxy)propan-1,3-diol (I), and a phenolic lignin model compound, phenol red, in the presence of the redox mediators 1-hydroxybenzotriazole (1-HBT) or violuric acid. The oxidation rates of dimer I by the laccases were in the following order: Trametes villosa laccase (TvL) > Pycnoporus cinnabarinus laccase (PcL) > Botrytis cinerea laccase (BcL) > Myceliophthora thermophila laccase (MtL) in the presence of either 1-HBT or violuric acid. The order is the same if the laccases are used at the same molar concentration or added to the same activity (with ABTS [2, 2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] as a substrate). During the oxidation of dimer I, both 1-HBT and violuric acid were to some extent consumed. Their consumption rates also follow the above order of laccases, i.e., TvL > PcL > BcL > MtL. Violuric acid allowed TvL and PcL to oxidize dimer I much faster than 1-HBT, while BcL and violuric acid oxidized dimer I more slowly than BcL and 1-HBT. The oxidation rate of dimer I is dependent upon both kcat and the stability of the laccase. Both 1-HBT and violuric acid inactivated the laccases, violuric acid to a greater extent than 1-HBT. The presence of dimer I or phenol red in the reaction mixture slowed down this inactivation. The inactivation is mainly due to the reaction of the redox mediator free radical with the laccases. We did not find any relationship between the carbohydrate content of the laccases and their inactivation. When the redox potential of the laccases is in the range of 750 to 800 mV, i.e., above that of the redox mediator, it does not affect kcat and the oxidation rate of dimer I.     

Depolymerization of biorefinery lignin by improved laccases of the white-rot fungus Obba rivulosa

Fungal laccases are attracting enzymes for sustainable valorization of biorefinery lignins. To improve the lignin oxidation capacity of two previously characterized laccase isoenzymes from the white-rot fungus Obba rivulosa, we mutated their substrate-binding site at T1. As a result, the pH optimum of the recombinantly produced laccase variant rOrLcc2-D206N shifted by three units towards neutral pH. O. rivulosa laccase variants with redox mediators oxidized both the dimeric lignin model compound and biorefinery poplar lignin. Significant structural changes, such as selective benzylic α-oxidation, were detected by nuclear magnetic resonance analysis, although no polymerization of lignin was observed by gel permeation chromatography. This suggests that especially rOrLcc2-D206N is a promising candidate for lignin-related applications.     

Induction, Isolation, and Characterization of Two Laccases from the White Rot Basidiomycete Coriolopsis rigida

Previous work has shown that the white rot fungus Coriolopsis rigida degraded wheat straw lignin and both the aliphatic and aromatic fractions of crude oil from contaminated soils. To better understand these processes, we studied the enzymatic composition of the ligninolytic system of this fungus. Since laccase was the sole ligninolytic enzyme found, we paid attention to the oxidative capabilities of this enzyme that would allow its participation in the mentioned degradative processes. We purified two laccase isoenzymes to electrophoretic homogeneity from copper-induced cultures. Both enzymes are monomeric proteins, with the same molecular mass (66 kDa), isoelectric point (3.9), N-linked carbohydrate content (9%), pH optima of 3.0 on 2,6-dimethoxyphenol (DMP) and 2.5 on 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), absorption spectrum, and N-terminal amino acid sequence. They oxidized 4-anisidine and numerous phenolic compounds, including methoxyphenols, hydroquinones, and lignin-derived aldehydes and acids. Phenol red, an unusual substrate of laccase due to its high redox potential, was also oxidized. The highest enzyme affinity and efficiency were obtained with ABTS and, among phenolic compounds, with 2,6-dimethoxyhydroquinone (DBQH₂). The presence of ABTS in the laccase reaction expanded the substrate range of C. rigida laccases to nonphenolic compounds and that of MBQH₂ extended the reactions catalyzed by these enzymes to the production of H₂O₂, the oxidation of Mn²⁺, the reduction of Fe³⁺, and the generation of hydroxyl radicals. These results confirm the participation of laccase in the production of oxygen free radicals, suggesting novel uses of this enzyme in degradative processes.     

Laccases from Basidiomycetes: physicochemical characteristics and substrate specificity towards methoxyphenolic compounds

Laccases from the Basidiomycetes Coriolus hirsutus, Coriolus zonatus, Cerrena maxima, and Coriolisimus fulvocinerea have been isolated and purified to homogeneity and partially characterized. The kinetics of oxidation of different methoxyphenolic compounds by the fungal laccases has been studied. As laccase substrates, such methoxyphenolic compounds as 4-hydroxy-3,5-dimethoxycinnamic acid (sinapinic acid), 4-hydroxy-3-methoxycinnamic acid (ferulic acid), and 2-methoxyphenol (guaiacol) were used. The stoichiometries of the enzymatic reactions were determined: guaiacol and sinapinic acid are one-electron donors and their oxidation apparently results in the formation of dimers. It was established that k _cat/K _m, which indicates the effectiveness of catalysis, increases in the series guaiacol, ferulic acid, and sinapinic acid. This fact might be connected with the influence of substituents of the phenolic ring of the substrates. This phenomenon was established for fungal laccases with different physicochemical properties, amino acid composition, and carbohydrate content. This suggests that all fungal laccases possess the same mechanism of interaction between organic substrate electron donors and the copper-containing active site of the enzyme and that this interaction determines the observed values of the kinetic parameters.     

Enhanced activity by poly(ethylene glycol) modification of Coriolopsis gallica laccase

We are studying the enzymatic modification of polycyclic aromatic hydrocarbons (PAHs) by the laccase from Coriolopsis gallica UAMH 8260. The enzyme was produced during growth in a stirred tank reactor to 15 units ml⁻¹, among the highest levels described for a wild-type fungus; the enzyme was the major protein produced under these conditions. After purification, it exhibited characteristics typical of a white rot fungal laccase. Fifteen azo and phenolic compounds at 1 mM concentration were tested as mediators in the laccase oxidation of anthracene. Higher anthracene oxidation was obtained with the mediator combination of ABTS and HBT, showing a correlation between the oxidation rate and the mediator concentration. Reactions with substituted phenols and anilines, conventional laccase substrates, and PAHs were compared using the native laccase and enzyme preparations chemically modified with 5000 MW-poly(ethylene glycol). Chemically modified laccase oxidized a similar range of substituted phenols as the native enzyme but with a higher catalytic efficiency. The k _cat increase by the chemical modification may be as great as 1300 times for syringaldazine oxidation. No effect was found of chemical modification on mediated PAH oxidation. Both unmodified and PEG-modified laccases increased PAH oxidation up to 1000 times in the presence of radical mediators. Thus, a change of the protein surface improves the mediator oxidation efficiency, but does not affect non-enzymatic PAH oxidation by oxidized mediators. Received 10 December 2001/ Accepted in revised form 20 July 2002     

A Novel Extracellular Multicopper Oxidase from Phanerochaete chrysosporium with Ferroxidase Activity

Lignin degradation by the white rot basidiomycete Phanerochaete chrysosporium involves various extracellular oxidative enzymes, including lignin peroxidase, manganese peroxidase, and a peroxide-generating enzyme, glyoxal oxidase. Recent studies have suggested that laccases also may be produced by this fungus, but these conclusions have been controversial. We identified four sequences related to laccases and ferroxidases (Fet3) in a search of the publicly available P. chrysosporium database. One gene, designated mco1, has a typical eukaryotic secretion signal and is transcribed in defined media and in colonized wood. Structural analysis and multiple alignments identified residues common to laccase and Fet3 sequences. A recombinant MCO1 (rMCO1) protein expressed in Aspergillus nidulans had a molecular mass of 78 kDa, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and the copper I-type center was confirmed by the UV-visible spectrum. rMCO1 oxidized various compounds, including 2,2′-azino(bis-3-ethylbenzthiazoline-6-sulfonate) (ABTS) and aromatic amines, although phenolic compounds were poor substrates. The best substrate was Fe²⁺, with a K_m close to 2 μM. Collectively, these results suggest that the P. chrysosporium genome does not encode a typical laccase but rather encodes a unique extracellular multicopper oxidase with strong ferroxidase activity.     

High redox potential laccases from the ligninolytic fungi Pycnoporus coccineus and Pycnoporus sanguineus suitable for white biotechnology: from gene cloning to enzyme characterization and applications

Aims: Exploitation of natural biodiversity in species Pycnoporus coccineus and Pycnoporus sanguineus to screen for a new generation of laccases with properties suitable for the lignin‐processing sector. Methods and Results: Thirty strains originating from subtropical and tropical environments, mainly isolated from fresh specimens collected in situ, were screened for laccase activity. On the basis of levels of enzyme activity and percentage of similarity between protein sequences, the laccases from strains BRFM 938, BRFM 66 and BRFM 902 were selected for purification and characterization. Each BRFM 938, BRFM 66 and BRFM 902 laccase gene encoded a predicted protein of 518 amino acids; the three deduced proteins showed 68·7–97·5% similarity with other Polyporale laccases. The three laccases (59·5–62·9 kDa with 7–10% carbohydrate content) had high redox potentials (0·72–0·75 V vs normal hydrogen electrode at pH 6), remained highly stable up to 75–78°C and at pH 5–7 mixtures, and were resistant to methyl and ethyl alcohols, acetonitrile and dimethylsulfoxide at concentrations as high as 50% (v/v). The best laccase‐1‐hydroxybenzotriazole systems permitted almost 100% of various polyphenolic dye decolourization and oxidation of adlerol and veratryl alcohol. Conclusions: The three laccases showed complementary biochemical features. BRFM 938 laccase had the highest thermo‐ and pH stability, catalytic efficiency towards 2,2′‐azino‐bis‐[3‐ethylthiazoline‐6‐sulfonate] and resistance to alcoholic solvents. BRFM 66 laccase had the highest rates of dye decolourization and oxidation of nonphenolic compounds. Significance and Impact of the Study: This study identified P. coccineus and P. sanguineus as outstanding producers of high redox potential laccases, easy to purify and scale‐up for industrial production. Three new laccases proved to be suitable models for white biotechnology processes and for further molecular breeding to create a new generation of tailor‐made enzymes.     

Generation and characterization of transgenic poplar plants overexpressing a cotton laccase gene

Laccases are copper-containing glycoproteins, which are widespread in higher plants as multigene families. To gain more insight in the function of laccases in plants, especially potential role in lignification, we produced transgenic poplar plants overexpressing a cotton laccase cDNA (GaLAC1) under the control of the cauliflower mosaic virus 35S promoter. As compared with untransformed control plants, transgenic plants exhibited a 2.1- to 13.2-fold increased laccase activity, whereas plant growth rate and morphological characters remained similar to control plants. A 2.1–19.6% increase in total lignin content of the stem was found in transgenic plants. Moreover, transgenic plants showed a dramatically accelerated oxidation rate of phenolics, without obvious change in total phenolic content. Our data suggested that GaLAC1 may participate in lignin synthesis and phenolic metabolism in plants. The present work provided a new genetic evidence for the involvement of plant laccases in lignification.     

Use of Laccase as a Novel, Versatile Reporter System in Filamentous Fungi

Laccases are copper-containing enzymes which oxidize phenolic substrates and transfer the electrons to oxygen. Many filamentous fungi contain several laccase-encoding genes, but their biological roles are mostly not well understood. The main interest in laccases in biotechnology is their potential to be used to detoxify phenolic substances. We report here on a novel application of laccases as a reporter system in fungi. We purified a laccase enzyme from the ligno-cellulolytic ascomycete Stachybotrys chartarum. It oxidized the artificial substrate 2,2′-azino-di-(3-ethylbenzthiazolinsulfonate) (ABTS). The corresponding gene was isolated and expressed in Aspergillus nidulans, Aspergillus niger, and Trichoderma reesei. Heterologously expressed laccase activity was monitored in colorimetric enzyme assays and on agar plates with ABTS as a substrate. The use of laccase as a reporter was shown in a genetic screen for the isolation of improved T. reesei cellulase production strains. In addition to the laccase from S. charatarum, we tested the application of three laccases from A. nidulans (LccB, LccC, and LccD) as reporters. Whereas LccC oxidized ABTS (K_m= 0.3 mM), LccD did not react with ABTS but with DMA/ADBP (3,5-dimethylaniline/4-amino-2,6-dibromophenol). LccB reacted with DMA/ADBP and showed weak activity with ABTS. The different catalytic properties of LccC and LccD allow simultaneous use of these two laccases as reporters in one fungal strain.     

Phenylpyrazolones, Novel Oxidoreductase Redox Mediators for Degradation of Xenobiotics

An approach was developed for screening organic compounds as putative redox mediators of oxidoreductases, including laccases and peroxidases, applicable for xenobiotic degradation. The study was carried out with a homogeneous laccase preparation from the basidiomycete Trametes hirsuta and horseradish peroxidase. Compounds belonging to 1-phenyl-3-methylpyrazolones were selected. Spectroscopic and electrochemical investigation of two of the compounds, sodium 1-phenyl-2,3-dimethyl-4-aminopyrazolone 5n(4)-methanesulfonate (PPNa) and 1-(3-sulfophenyl)-3-methylpyrazolone (SPP), was performed. Electrochemical oxidation of both PPNa and SPP gave rise to high-potential intermediates capable of oxidizing veratryl alcohol, a lignin-modeling compound. Kinetic parameters of these compounds were determined in enzymatic reactions in the presence of laccase. It was shown that enzymatic oxidation of SPP by laccase produced high-potential intermediates capable of oxidizing veratryl alcohol to veratric acid. Veratryl alcohol was not oxidized during enzymatic oxidation of SPP by peroxidase. This points to a difference between the mechanisms of enzymatic oxidation of PPNa and SPP by laccase and peroxidase.     

The phenol oxidases of the ascomycete Podospora anserina

For the low molecular weight laccases II and III of Podospora anserina the kinetic parameters Michaelis constant (K _M) and maximum reaction velocity (V) were determined polarographically under pH optimum conditions for representative substrates of different substitution patterns.Laccase II showed two peaks in its pH optimum curve, each with a different substrate specificity, indicating structural differences to laccase III which exhibits only one broad peak.Under optimum conditions the affinities of various substrates are determined by their substitution patterns: high affinity for simple o-and p-diphenols, low affinity for m-phenols. The maximal velocity remains largely uninfluenced.This study of the effect of substitution on substrate utilization leads to the assumption that there is no specific reactive site for m-phenols in either laccase. Oxidation of m-phenols, however, takes only place at high pH values.     

Oxidation of the erythro and threo forms of the phenolic lignin model compound 1-(4-hydroxy-3-methoxyphenyl)-2-(2-methoxyphenoxy)-1,3-propanediol by laccases and model oxidants

Mixtures of equal amounts of the erythro and threo forms of the phenolic arylglycerol β-aryl ether 1-(4-hydroxy-3-methoxyphenyl)-2-(2-methoxyphenoxy)-1,3-propanediol were oxidized (i) with laccases from Trametes versicolor, Agaricus bisporus, Myceliophthora thermophila and Rhus vernicifera, (ii) with laccase-mediator systems consisting of T. versicolor laccase and ABTS or HBT, and (iii) with various model oxidants including cerium(IV) ammonium nitrate (CAN), lignin peroxidase, Fenton’s reagent, and lead(IV) tetraacetate (LTA). All the laccases exhibited a similar preferential degradation of the threo form. The mediator ABTS counteracted the threo preference of laccase, but the mediator HBT did not affect it. The outer-sphere model oxidants CAN and lignin peroxidase showed a preferential degradation of the threo form. LTA and Fenton’s reagent did not exhibit any stereo-preference. The results suggest that laccases of different origin, primary structure, and redox potential behave as typical outer-sphere oxidants in their interaction with the diastereomers of the arylglycerol β-aryl ether.     

Inducer and culture medium dependent properties of extracellular laccase from Botrytis cinerea

Both the composition of the culture medium and the nature of the phenolic inducer determine the amount, the rate of formation and the molecular properties of extracellular laccase formed by Botrytis cinerea. Coumaric acid is shown to act as inducer in addition to gallic acid and grape juice. It is suggested that the fungus adapts to different environments by excreting different laccases. These laccases differ in pK, heat stability and substrate specificity but not in K_m values to quinol and oxygen.     

Biochemical and molecular characterization of Coriolopsis rigida laccases involved in transformation of the solid waste from olive oil production

Two laccase isoenzymes were purified and characterized from the basidiomycete Coriolopsis rigida during transformation of the water-soluble fraction of “alpeorujo” (WSFA), a solid residue derived from the olive oil production containing high levels of toxic compounds. Zymogram assays of laccases secreted by the fungus growing on WSFA and WSFA supplemented with glucose showed two bands with isoelectric points of 3.3 and 3.4. The kinetic studies of the two purified isoenzymes showed similar affinity on 2,6-dimethoxyphenol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid), used as phenolic and non-phenolic model substrate, respectively. The molecular mass of both proteins was 66 kDa with 9% N-linked carbohydrate. Physico-chemical properties of the purified laccases from media containing WSFA were similar to those obtained from medium with glucose as the main carbon source. In-vitro studies performed with the purified laccases revealed a 42% phenol reduction of WSFA, as well as changes in the molecular mass distribution. These findings indicate that these laccases are involved in the process of transformation, via polymerization by the oxidation of phenolic compounds present in WSFA. A single laccase gene, containing an open reading frame of 1,488 bp, was obtained in PCR amplifications performed with cDNA extracted from mycelia grown on WSFA. The product of the gene shares 90% identity (95% similarity) with a laccase from Trametes trogii and 89% identity (95% similarity) with a laccase from Coriolopsis gallica. This is the first report on purification and molecular characterization of laccases directly involved in the transformation of olive oil residues.     

Redox Chemistry in Laccase-Catalyzed Oxidation of N-Hydroxy Compounds

1-Hydroxybenzotriazole, violuric acid, and N-hydroxyacetanilide are three N-OH compounds capable of mediating a range of laccase-catalyzed biotransformations, such as paper pulp delignification and degradation of polycyclic hydrocarbons. The mechanism of their enzymatic oxidation was studied with seven fungal laccases. The oxidation had a bell-shaped pH-activity profile with an optimal pH ranging from 4 to 7. The oxidation rate was found to be dependent on the redox potential difference between the N-OH substrate and laccase. A laccase with a higher redox potential or an N-OH compound with a lower redox potential tended to have a higher oxidation rate. Similar to the enzymatic oxidation of phenols, phenoxazines, phenothiazines, and other redox-active compounds, an “outer-sphere” type of single-electron transfer from the substrate to laccase and proton release are speculated to be involved in the rate-limiting step for N-OH oxidation.     

Bioprocess optimization of laccase production through solid substrate fermentation using Perenniporia tephropora-L168 and its application in bioremediation of triaryl-methane dye

Laccases are multi copper oxidases that can oxidize both phenolic and nonphenolic lignin related compounds. Consequently, there has been continuous demand for laccases for the oxidative degradation of phenolic dyes in effluents. In view of this, the present work was focused on laccase production by solid substrate fermentation using a newly isolated fungus Perenniporia tephropora-L168. To intensify the laccase production, the process parameters pH, nitrogen, inducer, and substrate: water ratio were optimized by using statistical model. A set of optimal conditions noted were pH 3, nitrogen 0.001 g/L; inducer 0.5% and substrate: water ratio (1:10), which yielded laccase 1,160 U/g. The crude laccase exhibited noteworthy potential to degrade a triaryl-methane dye especially Malachite green. Also, during bioremediation studies, the statistical process optimization could achieve 81% decolourization within 180 min. The laccase treatment brought chemical transformation in malachite green as evident from UV–Visible spectra, FTIR, HPLC while toxicity against bacteria and fungi was also reduced. During phytotoxicity study, effect of treated and untreated dye on germination of seed was analyzed. Interestingly, the germination index for Vigna aconitifolia and Vigna radiata was increased by two and fourfold, respectively. Overall, this work demonstrates optimized production of laccase using Perenniporia tephropora-L168 and its efficient bioremediation potential for triaryl-methane dye.     

Knockdown of a laccase in Populus deltoides confers altered cell wall chemistry and increased sugar release

Plant laccases are thought to function in the oxidation of monolignols which leads to higher order lignin formation. Only a hand‐full of laccases in plants have been functionally evaluated, and as such little is known about the breadth of their impact on cell wall chemistry or structure. Here, we describe a previously uncharacterized laccase from Populus, encoded by locus Potri.008G064000, whose reduced expression resulted in transgenic Populus trees with changes in syringyl/guaiacyl ratios as well as altered sugar release phenotypes. These phenotypes are consistent with plant biomass exhibiting reduced recalcitrance. Interestingly, the transgene effect on recalcitrance is dependent on a mild pretreatment prior to chemical extraction of sugars. Metabolite profiling suggests the transgene modulates phenolics that are associated with the cell wall structure. We propose that this particular laccase has a range of functions related to oxidation of phenolics and conjugation of flavonoids that interact with lignin in the cell wall.     

Characterization of the Alkaline Laccase Ssl1 from Streptomyces sviceus with Unusual Properties Discovered by Genome Mining

Fungal laccases are well investigated enzymes with high potential in diverse applications like bleaching of waste waters and textiles, cellulose delignification, and organic synthesis. However, they are limited to acidic reaction conditions and require eukaryotic expression systems. This raises a demand for novel laccases without these constraints. We have taken advantage of the laccase engineering database LccED derived from genome mining to identify and clone the laccase Ssl1 from Streptomyces sviceus which can circumvent the limitations of fungal laccases. Ssl1 belongs to the family of small laccases that contains only few characterized enzymes. After removal of the twin-arginine signal peptide Ssl1 was readily expressed in E. coli. Ssl1 is a small laccase with 32.5 kDa, consists of only two cupredoxin-like domains, and forms trimers in solution. Ssl1 oxidizes 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) and phenolic substrates like 2,6-dimethoxy phenol, guaiacol, and syringaldazine. The k_cat value for ABTS oxidation was at least 20 times higher than for other substrates. The optimal pH for oxidation reactions is substrate dependent: for phenolic substrates the highest activities were detected at alkaline conditions (pH 9.0 for 2,6-dimethoxy phenol and guaiacol and pH 8.0 for syringaldazine), while the highest reaction rates with ABTS were observed at pH 4.0. Though originating from a mesophilic organism, Ssl demonstrates remarkable stability at elevated temperatures (T_1/2,60°C = 88 min) and in a wide pH range (pH 5.0 to 11.0). Notably, the enzyme retained 80% residual activity after 5 days of incubation at pH 11. Detergents and organic co-solvents do not affect Ssl1 stability. The described robustness makes Ssl1 a potential candidate for industrial applications, preferably in processes that require alkaline reaction conditions.