Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Identification of restriction fragments from two cryptic Clostridium butyricum plasmids that promote the establishment of a replication-defective plasmid in Bacillus subtilis

Clostridium butyricum NCIB 7423 carries two cryptic plasmids, pCB101 (6.05 kbp) and pCB102 (7.8 kbp). Sites for the restriction enzymes EcoRI, EcoRV, HindIII, ClaI and PstI have been found in one or both of these plasmids and their relative positions determined. Restriction fragments from both plasmids have been inserted into a vector plasmid (pJAB1) that is able to replicate in Escherichia coli but not in Bacillus subtilis and the recombinant plasmids have been established in E. coli. A 3.3 kbp Sau3A fragment of pCB101 conferred upon the vector the ability to transform both Rec+ and Rec- strains of B. subtilis. Plasmid pRB1, a representative chimaera carrying only the 3.3 kbp Sau3A fragment of pCB101, was successfully transferred from B. subtilis back to E. coli. Plasmid pRB1 was readily lost from B. subtilis in the absence of selection. This evidence, together with the results of hybridization experiments, suggests that pRB1 is present as a weakly replicating autonomous element in B. subtilis. A recombinant plasmid carrying a 2.0 kbp Sau3A fragment of pCB102 underwent integration into the B. subtilis chromosome.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.     

Sequence analysis of the cryptic plasmid pMG101 from Rhodopseudomonas palustris and construction of stable cloning vectors

A 15-kb cryptic plasmid was obtained from a natural isolate of Rhodopseudomonas palustris. The plasmid, designated pMG101, was able to replicate in R. palustris and in closely related strains of Bradyrhizobium japonicum and phototrophic Bradyrhizobium species. However, it was unable to replicate in the purple nonsulfur bacterium Rhodobacter sphaeroides and in Rhizobium species. The replication region of pMG101 was localized to a 3.0-kb SalI-XhoI fragment, and this fragment was stably maintained in R. palustris for over 100 generations in the absence of selection. The complete nucleotide sequence of this fragment revealed two open reading frames (ORFs), ORF1 and ORF2. The deduced amino acid sequence of ORF1 is similar to sequences of Par proteins, which mediate plasmid stability from certain plasmids, while ORF2 was identified as a putative rep gene, coding for an initiator of plasmid replication, based on homology with the Rep proteins of several other plasmids. The function of these sequences was studied by deletion mapping and gene disruptions of ORF1 and ORF2. pMG101-based Escherichia coli-R. palustris shuttle cloning vectors pMG103 and pMG105 were constructed and were stably maintained in R. palustris growing under nonselective conditions. The ability of plasmid pMG101 to replicate in R. palustris and its close phylogenetic relatives should enable broad application of these vectors within this group of alpha-proteobacteria.     

Nucleotide sequence and characterization of the broad-host-range lactococcal plasmid pWVO1.

The nucleotide sequence of the Lactococcus lactis broad-host-range plasmid pWVO1, replicating in both gram-positive and gram-negative bacteria, was determined. This analysis revealed four open reading frames (ORFs). ORF A appeared to encode a trans-acting 26.8-kDa protein (RepA), necessary for replication. The ORF C product was assumed to play a regulatory role in replication. Both RepA and the ORF C product showed substantial sequence similarity with the Rep proteins of the streptococcal plasmid pLS1. In addition, the plus origin of replication was identified on the basis of strong similarity with the plus origin of pLS1. Derivatives of pWVO1 produced single-stranded (ss) DNA in Bacillus subtilis and L. lactis, suggesting that this plasmid uses the rolling-circle mode of replication. In B. subtilis, but not in L. lactis, the addition of rifampicin resulted in increased levels of ssDNA, indicating that in the former organism the host-encoded RNA polymerase is involved in the conversion of the ssDNA to double-stranded plasmid DNA (dsDNA). Apparently, in L. lactis the conversion of ss to ds pWVO1 DNA occurs by a mechanism which does not require the host RNA polymerase.     

Detection and characterization of naturally occurring plasmids in Bacillus licheniformis

Twenty-two Bacillus licheniformis strains, freshly isolated from pasture-land, were studied for the presence of plasmid DNA. Among these strains, 14 were shown to harbor one or more plasmids of different size. Southern-hybridization experiments showed a high homology between all plasmids investigated and a 2.2-kb PvuII/HindIII fragment of pBL1, a B. licheniformis plasmid previously isolated. Three fragments of pBL1, including the 2.2-kb PvuII/HindIII region, were cloned into pJH101 vector. The resulting chimeras were able to transform Bacillus subtilis. The fragment with high homology probably contains the region with the replicative functions of plasmids from B. licheniformis species.     

Detection, cloning, and sequence analysis of an indigenous plasmid from cellulolytic clostridial strain MCF1

Nucleotide sequence analysis of a 2451-bp plasmid (pMCF1) from a cellulolytic Clostridium revealed that the protein specified by the largest open reading frame (ORF1) was homologous to RepB of Clostridium butyricum plasmid pCB101. The data suggest that pMCF1 belongs to the pC194 family of rolling-circle replicating plasmids and the ORF1 protein functions as its replication protein.     

Identification and nucleotide sequence of the minimal replicon of the low-copy-number plasmid pBS2

The plasmid pBS2 has a low copy number and is endogenous to Bacillus subtilis. The replication of this plasmid depends on the function of most of the host's dna genes including dnaB, which is unique to B. subtilis and is required for both the initiation of chromosome replication and the DNA-membrane association. We have identified the region that is essential for the replication of pBS2 and determined the complete 2279-bp nucleotide sequence of this region. In this region, there are two stretches of sequence homologous to the 18-bp consensus sequence which commonly appears at the origin of replication of plasmids pUB110 and pC194. The entire region contains six sizable open reading frames. Two of them are probably translated. One open reading frame, designated ORF A, coding for 269 amino acids, has significant homology, in terms of amino acid sequence, with the open reading frame of the gene for the Rep U protein of plasmid pUB110. The similarities between pBS2 and other plasmids suggest that the pBS2 may also replicate as a rolling circle, which appears to be the salient feature of a mechanism of replication that is common to small plasmids in gram-positive bacteria.     

Characterization of two small cryptic plasmids from Pseudomonas sp. strain S-47

Two small cryptic plasmids, p47L and p47S, identified in Pseudomonas sp. S-47 were characterized by determination of DNA sequences and physical and functional maps. They are 3084 and 1782 bp in length, respectively, with GC contents of 63.55 and 65.21%. The detection of single-strand DNAs of both plasmids indicates that they replicate by a rolling-circle mechanism. The deduced polypeptide encoded by the rep gene of p47L is homologous with Rep proteins of plasmids belonging to the pIJ101/pJV1 family, which are known to replicate by the rolling-circle mechanism. Despite containing a homologous signature with Rep proteins of rolling-circle replicating (RCR) plasmids in the pT181 family, the Rep of p47S lacks significant homology with Rep proteins of this family and is missing a region similar to the family's replication origin (dso). Based on the rep sequence comparisons, p47L falls into a previously defined plasmid family whereas p47S defines a new family of RCR plasmid.     

Sequence Analysis of the Cryptic Plasmid pMG101 from Rhodopseudomonas palustris and Construction of Stable Cloning Vectors

A 15-kb cryptic plasmid was obtained from a natural isolate of Rhodopseudomonas palustris. The plasmid, designated pMG101, was able to replicate in R. palustris and in closely related strains of Bradyrhizobium japonicum and phototrophic Bradyrhizobium species. However, it was unable to replicate in the purple nonsulfur bacterium Rhodobacter sphaeroides and in Rhizobium species. The replication region of pMG101 was localized to a 3.0-kb SalI-XhoI fragment, and this fragment was stably maintained in R. palustris for over 100 generations in the absence of selection. The complete nucleotide sequence of this fragment revealed two open reading frames (ORFs), ORF1 and ORF2. The deduced amino acid sequence of ORF1 is similar to sequences of Par proteins, which mediate plasmid stability from certain plasmids, while ORF2 was identified as a putative rep gene, coding for an initiator of plasmid replication, based on homology with the Rep proteins of several other plasmids. The function of these sequences was studied by deletion mapping and gene disruptions of ORF1 and ORF2. pMG101-based Escherichia coli-R. palustris shuttle cloning vectors pMG103 and pMG105 were constructed and were stably maintained in R. palustris growing under nonselective conditions. The ability of plasmid pMG101 to replicate in R. palustris and its close phylogenetic relatives should enable broad application of these vectors within this group of α-proteobacteria.     

Characterization of a region of the Enterococcus faecalis plasmid pAM beta 1 which enhances the segregational stability of pAM beta 1-derived cloning vectors in Bacillus subtilis.

The nucleotide sequence of a 2.13-kb EcoRI-HindIII, pAM beta 1-derived fragment, isolated from the gram-positive cloning vector pHV1431, has been determined and shown to encode two ORFs. ORF H encodes for a protein of 23,930 Da which exhibits substantial homology to bacterial site-specific recombinases, particularly the resolvases of the gram-positive transposons Tn917 (30.3% identity) and Tn552 (31.6% identity) and the clostridial plasmid pIP404 (27.1% identity). The second ORF (I) is incomplete and encodes a polypeptide which has significant homology with Escherichia coli topoisomerase I (26.0% identity). Insertion of either the entire 2.13-kb EcoRI-HindIII fragment or a 0.73-kb EcoRI-DraI subfragment encoding only the resolvase into the pAM beta 1-based cloning vector pMTL500E causes a significant enhancement of segregational stability (from 6.5 X 10(-2) to 3.0-4.0 X 10(-3) plasmid loss per cell per generation). Improved segregational stability is mirrored by a reduction in plasmid polymerization. The introduction of a stop codon into the resolvase coding region negates its ability to promote segregational stability. It is proposed that the identified determinant stabilizes pAM beta 1-based vectors in Bacillus subtilis by maintaining the plasmid population in the monomeric state, thereby reducing the chances of producing plasmid-free segregants.     

Characterization of the cryptic plasmid pCC1 from Corynebacterium callunae and its use for vector construction

The complete nucleotide sequence of the cryptic plasmid pCC1 from Corynebacterium callunae (4109 bp) was determined. DNA sequence analysis revealed five open reading frames longer than 200 bp. One of the deduced polypeptides showed homology with the Rep proteins encoded by plasmids of the pIJ101/pJV1 family of plasmids replicating by the rolling-circle (RC) mechanism. Within this plasmid family, the Rep protein of pCC1 showed the highest degree of similarity to the Rep proteins of corynebacterial plasmids pAG3 and pBL1. These data suggest that the plasmid pCC1 replicates by the RC mechanism. The Escherichia coli/Corynebacterium glutamicum shuttle cloning vector pSCCD1, carrying the pCC1 rep gene on the 2.1-kb DNA fragment and the streptomycin/spectinomycin resistance determinant, was constructed. This vector is stably maintained in population of C. glutamicum cells grown in the absence of selection pressure and it is compatible with plasmid vectors based on corynebacterial plasmids pBL1 and pSR1.     

Characterization and comparative sequence analysis of replication origins from three large Bacillus thuringiensis plasmids.

The replication origins of three large Bacillus thuringiensis plasmids, derived from B. thuringiensis HD263 subsp. kurstaki, have been cloned in Escherichia coli and sequenced. The replication origins, designated ori 43, ori 44, and ori 60, were isolated from plasmids of 43, 44, and 60 MDa, respectively. Each cloned replication origin exhibits incompatibility with the resident B. thuringiensis plasmid from which it was derived. Recombinant plasmids containing the three replication origins varied in their ability to transform strains of B. thuringiensis, Bacillus megaterium, and Bacillus subtilis. Analysis of the derived nucleotide and amino acid sequences indicates that the replication origins are nonhomologous, implying independent derivations. No significant homology was found to published sequences of replication origins derived from the single-stranded DNA plasmids of gram-positive bacteria, and shuttle vectors containing the three replication origins do not appear to generate single-stranded DNA intermediates in B. thuringiensis. The replication origin regions of the large plasmids are each characterized by a single open reading frame whose product is essential for replication in B. thuringiensis. The putative replication protein of ori 60 exhibits partial homology to the RepA protein of the Bacillus stearothermophilus plasmid pTB19. The putative replication protein of ori 43 exhibits weak but extensive homology to the replication proteins of several streptococcal plasmids, including the open reading frame E replication protein of the conjugative plasmid pAM beta 1. The nucleotide sequence of ori 44 and the amino acid sequence of its putative replication protein appear to be nonhomologous to other published replication origin sequences.     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

Sequence analysis and characterization of plasmids from Streptococcus thermophilus

The nucleotide sequences of eight plasmids isolated from seven Streptococcus thermophilus strains have been determined. Plasmids pSt04, pER1-1, and pJ34 are related and replicate via a rolling circle mechanism. Plasmid pJ34 encodes for a replication initiation protein (RepA) and a small polypeptide with unknown function. Plasmids pSt04 and pER1-1 carry in addition to repA genes coding for small heat shock proteins (sHsp). Expression of these proteins is induced at elevated temperatures or low pH and increases the thermo- and acid resistance. Plasmids pER1-2 and pSt22-2 show identical sequences with five putative open reading frames (ORFs). The gene products of ORF1 and ORF4 reveal some similarities to transposon encoded proteins of Bacillus subtilis and Tn916. ORF1 of plasmid pSt106 encodes a protein similar to resolvases of different Gram-positive bacteria. Integrity of ORF2 and 3, encoding a putative DNA primase and a replication protein, is essential for replication. ORF1 to 3 of plasmid pSt08, which are organized in a tricistronic operon, encode a RepA protein, an adenosine-specific methyltransferase, and a type II restriction endonuclease. Another type II restriction-modification (R/M) system is encoded on plasmid pSt0 which is highly similar to those encoded on lactococcal plasmid pHW393 and B. subtilis plasmid pXH13. Plasmid-free derivatives of strains St0 and St08 show increased phage sensitivity, indicating that in the wild-type strains the R/M systems are functionally expressed. Recombinant plasmids based on the replicons of plasmids pSt04, pJ34, pSt106, pSt08, and pSt0, are able to replicate in Lactococcus lactis and B. subtilis, respectively, whereas constructs carrying pER1-2 only replicate in S. thermophilus.     

Characterization and sequence analysis of a small plasmid from Bacillus thuringiensis var. kurstaki strain HD1-DIPEL

The complete nucleotide sequence of a small (2.055 kb) plasmid pHD2 from Bacillus thuringiensis var. kurstaki strain HD1-DIPEL was obtained. The sequence encoded two open reading frames (ORFs) which corresponded to polypeptides of Mr 26,447 and 9122. Comparison of the sequence with those obtained for other plasmids from Gram-positive organisms suggested that pHD2 may belong to the extensive and highly interrelated family of plasmids exhibiting replication via a ssDNA intermediate: a putative nick site was proposed on the basis of sequence homology and one ORF exhibited distant homology with the site-specific topoisomerases encoded by the pT181 family of staphylococcal plasmids, while the other ORF exhibited considerable similarity to a small polypeptide (RepA) encoded by plasmid pLS1. Constructs consisting of pHD2, pBR322, and the chloramphenicol resistance gene from pC194 were capable of stable maintenance in B. thuringiensis var. israelensis, but were subject to apparently specific deletions in the heterologous host. The same constructs could not be established in Bacillus subtilis.     

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.     

Extrachromosomal DNA isolated from tomato big bud and Candidatus Phytoplasma australiense phytoplasma strains

The nucleotide sequences of two extrachromosomal elements from tomato big bud (TBB) and one extrachromosomal element from Candidatus Phytoplasma australiense (Ca. P. australiense) phytoplasmas were determined. Both TBB plasmids (3319 and 4092 bp) contained an open reading frame ( approximately 570 bp) with homology to the rolling circle replication initiator protein (Rep). This gene was shorter than the rep genes identified from other phytoplasma plasmids, geminiviruses and bacterial plasmids. Both TBB extrachromosomal DNAs (eDNAs) encoded a putative DNA primase (dnaG) gene, a chromosomal gene required for DNA replication and which contains the conserved topoisomerase/primase domain. We speculate that the replication mechanism for the TBB phytoplasma eDNA involves the dnaG gene instead of the rep gene. The Ca. P. australiense eDNA (3773 bp) was shown to be circular and contained four open reading frames. The rep gene was encoded on ORF 1 and had homology to both plasmid (pLS1) and geminivirus-like domains.