The esterase profile of a lipase from Candida cylindracea

A commercial preparation of a lipase produced by Candida cylindracea catalysed the hydrolysis of both long- and short-chain esters of p-nitrophenol. Six major bands of hydrolytic activity to alpha-naphthyl acetate were detected on polyacrylamide gel electrophoresis and two on isoelectric focusing. The esterase activity fractionated into two major peaks of activity on ion-exchange chromatography and into several peaks of activity on hydrophobic interaction chromatography. These esterase activities showed different substrate specificities to p-nitrophenyl esters, tributyrin and cetyl palmitate.     

Lipase kinetics: hydrolysis of triacetin by lipase from Candida cylindracea in a hollow-fiber membrane reactor

The aptitude of a hollow-fiber membrane reactor to determine lipase kinetics was investigated using the hydrolysis of triacetin catalyzed by lipase from Canadida cylindracea as a model system. The binding of the lipase to the membrane appears not to be very specific (surface adsorption), and probably its conformation is hardly altered by immobilization, resulting in an activity comparable to that of the enzyme in its native form. The reaction kinetics defined on the membrane surface area were found to obey Michaelis-Menten kinetics. The specific activity of the lipase in the membrane reactor was found to be significantly higher than in an emulsion reactor. The activity and stability of the enzyme immobilized on a hydrophilic membrane surface seem not to be influenced significantly by the choice of the membrane material. The hollow-fiber membrane reactor is a suitable tool to assess lipase kinetics in a fast and convenient way.     

Interesterification and synthesis by Candida cylindracea lipase in microemulsions

Unusual reactions of interesterification and synthesis catalyzed by Candida cylindracea lipase have been tested in reverse microemulsions. The microemulsions used are made of fatty acids or triglycerides, the enzyme dissolved in a very low water quantity, Brij 35 used as surfactant and an alcoholic cosurfactant. In such a system, fats and alcohols are both the substrates of the enzyme and the microemulsion components. Incidentally, non specific Candida cylindracea lipase does not catalyze interesterification of short chain triglycerides, revealing a specificity for the chain length. Interesterification reactions tested in the presence of a given water quantity but with varying water activities show that it is the water activity and not the water quantity which is a fundamental parameter of the system. The effect of the surfactant (Brij 35) on the interesterification reaction is studied. Heptyl-oleate synthesis catalyzed by non-specific lipase is obtained in microemulsions at a 98% yield. Synthesis of glycerol esters is also tested in monophasic medium and mono and diglycerides are obtained.     

Cloning and nucleotide sequences of two lipase genes from Candida cylindracea.

Two lipase-encoding genes (LIP1 and LIP2) have been isolated from a SacI genomic library of the yeast Candida cylindracea and their nucleotide sequences have been determined. Comparison with the sequence of a cDNA ruled out the presence of introns in the two genes. Both ORFs encode for mature proteins of 534 residues with putative signal peptides of 15 and 14 amino acids, respectively. When compared with other lipase sequences, the two C. cylindracea lipases showed homology only with the Geotrichum candidum lipase, whereas they shared a significant similarity with several esterases.     

Production of extracellular lipase by Candida cylindracea CBS 6330

In this study we investigated the influences of aeration, substrate type and concentration on extracellular lipase production in a batch fermentor. The use of air enriched with pure oxygen is the most suitable for the lipase production. Additionally, we found that the presence of fats in the culture broth did not affect the value of the volumetric mass transfer coefficient of oxygen in our system. Olive oil or oleic acid was used as carbon sources. In both cases, the maximal specific rate of growth, μ_max, was the same but the highest activity was obtained when 10?g/dm³ of olive oil were used as an initial substrate concentration.     

Homology-derived three-dimensional structure prediction of Candida cylindracea lipase.

We propose a structural model of Candida cylindracea lipase (CCL) based on the reported X-ray structure of the highly homologous Geotrichum candidum lipase (GCL). The network of interactions around the active site, the salt and disulfide bridge pattern is conserved in the proposed structure. Functional, structural and evolutionary aspects of the peculiar usage of CTG codons by C. cylindracea ATCC 14830 are discussed.     

Double enantioselective esterification of racemic acids and alcohols by lipase from Candida cylindracea

Summary Doubly enantioselective lipase-catalyzed esterification of racemic acids and alcohols was proceeded in n-hexane. The enantioselectivities of the lipase toward both of racemic substrates were affected reciprocally. It showed that the active site of the lipase was quite flexible.     

海藻糖对脂肪酶的保护机理及酶失活动力学

采用自制的磁性固定化酶(MIE),考察了高温下二糖类对酶的保护作用。结果显示:海藻糖对悬浮于水溶液中的MIE没有保护作用;而在高温干燥后,对酶的保护作用效果依次为:海藻糖>乳糖>蔗糖,支持‘玻璃态学说’;此外,采用两步失活动力学模型能够较好的拟合酶的失活过程,并且得到酶的失活速率常数k和半衰期t1/2,加入海藻糖和乳糖之后,MIE的半衰期分别增长了31和23倍。     

Studies on Lipase from Candida cylindracea

Lipase from Candida cylindracea has been purified by ammonium sulfate precipitation, sodium deoxycholate treatment, ethanol-ether precipitation and chromatography on SE-Sephadex and Sephadex G-100 columns. The purification of the enzyme was 33.4-fold with a yeild of 18.0% on the basis of activity per weight of protein. The purified enzyme was homogeneous on ultracentrifugation and electrophoresis. Optimum pH for the hydrolysis of olive oil was 7.2 by the assay method using a polyvinylalcohol-emulsified system and 5.2 by the assay method using a shaken system without a macromolecular emulsifier. Optimum temperature was 45°C. The enzyme was stable up to 15°G and in the range of pH from 2.0 to 8.5. Sodium taurocholate showed either an activating or an inhibiting effect at pH 7.0, depending on the sodium taurocholate concentration and on the assay system.     

Studies on Lipase from Candida cylindracea

The amino acid composition of the purified extracellular lipase from Candida cylindracea was determined by ion-exchange chromatography with the use of an automatic amino acid analyzer, and a high content of hydrophobic amino acid residues was found. The enzyme was a glycoprotein, in which mannose and xylose were contained as carbohydrate components. Physical properties of the enzyme were the sedimentation coefficient of 4.7 × 10^?13 (cm/sec.)/(dyne/g), the partial specific volume of 0.76 ml/g and the intrinsic viscosity of 0.085 dl/g, and its molecular weight was discussed.     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Reaction conditions for the resolution of 2-methylalkanoic acids in esterification and hydrolysis with lipase from Candida cylindracea

Summary We have demonstrated resolution of 2-methylalkanoic acids using lipase from Candida cylindracea as a catalyst. The resolution of 2-methyldecanoic acid was more successful than that of 2-methylbutyric acid both by esterification and hydrolysis. This indicates that the resolution of the acid is dependent on the chain length of the acid moiety. The chain length of the alcohol moiety of the ester affected the resolution of the long-chain acid only. Using esterification, (R)-2-methyldecanoic acid was produced in an enantiomeric excess (e.e.) of 95% (E = 40). If the enantiomeric ratio is low (E = 3.6), as in the resolution of 2-methylbutyric acid, esterification combined with a high equilibrium conversion could be used to yield the remaining acid in a high e.e. In the hydrolytic reactions, the e.e and the equilibrium conversion were dependent on the pH and the presence of CaCl₂. When octyl 2-methyldecanoate was hydrolysed at pH 8.0 in the presence of CaCl₂, the (S)-acid was formed with an e.e. of 80% (E = 9), but when the hydrolysis was carried out at pH 7.5 without CaCl₂, a very low e.e. and a low equilibrium conversion were observed. The latter conditions allowed the esterification of 2-methyldecanoic acid with 1-octanol even in aqueous medium. Offprint requests to: K. Hult     

Hydrolysis of menhaden oil by a Candida cylindracea lipase immobilized in a hollow-fiber reactor

A lipase from Candida cylindracea immobilized by adsorption on microporous polypropylene fibers was used to selectively hydrolyze the saturated and monounsaturated fatty acid residues of menhaden oil at 40 degrees C and pH 7.0. At a space time of 3.5 h, the shell and tube reactor containing these hollow fibers gives a fractional release of each of the saturated and monounsaturated fatty acid residues (i.e., C14, C16, C16:1, C18:1) of ca. 88% of the corresponding possible asymptotic value. The corresponding coproduct glycerides retained over 90% of the initial residues of both eicosapentaenoic (EPA; C20:5) and docosahexaenoic (DHA; C22:6) acids. The half-life of the immobilized lipase was 170 h when the reactor was operated at the indicated (optimum) conditions. Rate expressions associated with a generic ping-pong bi-bi mechanism were used to fit the experimental data for the lipase catalyzed reaction. Both uni- and multiresponse nonlinear regression methods were employed to determine the kinetic parameters associated with these rate expressions. The best statistical fit of the uniresponse data was obtained for a rate expression, which is formally equivalent to a general Michaelis-Menten mechanism. After reparameterization, this rate expression reduced to a pseudo-first-order model. For the multiresponse analysis, a model that employed a normal distribution of the ratio of Vmax/Km with respect to the chain length of the fatty acid residues provided the best statistical fit of the experimental data.     

Enantioselective synthesis of ibuprofen esters in AOT/isooctane microemulsions by Candida cylindracea lipase

The enantioselective esterification of racemic ibuprofen, catalyzed by a Candida cylindracea lipase, was studied in a water-in-oil microemulsion (AOT/isooctane). By using n-propanol as the alcohol, an optimal W(0) ([H(2)O]/[AOT] ratio) of 12 was found for the synthesis of n-propyl-ibuprofenate at room temperature. The lipase showed high preference for the S(+)-enantiomer of ibuprofen, which was esterified to the corresponding S(+)-ibuprofen ester. The R(-)-ibuprofen remained unesterified in the microemulsion. The calculated enantioselectivity value (E) for S-ibuprofen ester was greater than 150 (conversion 0.32). The enzyme activities of n-alcohols with different chain lengths (3-12) were compared, and it appeared that short- (propanol and butanol) and long-chained (decanol and dodecanol) alcohols were better substrates than the intermediate ones (pentanol, hexanol, and octanol). However, unlike secondary and tertiary alcohols, all of the tested primary alcohols were substrates for the lipase. The reversible reaction (i.e., the hydrolysis of racemic ibuprofen ester in the microemulsion) was also carried out enantioselectively by the enzyme. Only the S form of the ester was hydrolyzed to the corresponding S-ibuprofen. The reaction yield was, however, only about 4% after 10 days of reaction. The corresponding yield for the esterification of ibuprofen was about 35% (10 days). The high enantioselectivity displayed by the lipase in the microemulsion system was seen neither in a similar esterification reaction in a pure organic solvent system (isooctane) nor in the hydrolysis reaction in an aqueous system (buffer). The E value for S-ibuprofen ester in the isooctane system was 3.0 (conversion 0.41), and only 1.3 for S-ibuprofen in the hydrolysis reaction (conversion 0.32). The differences in enantioselectivity for the lipase in various systems are likely due to interfacial phenomena. In the microemulsion system, the water in which the enzyme is dissolved is separated from the solvent by a layer of surfactant molecules, thus creating an interface with a relatively large area. Such interfaces are not present in the pure organic solvent systems (no surfactant) nor in aqueous systems. (c) 1993 John Wiley & Sons, Inc.     

The inhibitory kinetics and mechanism of glycolic acid on lipase

Abstract

Obesity is prone to cause a variety of chronic metabolic diseases, and it has aroused people’s attention that the rapid increase in the global population of obese people in the past years. As a kind of weight-loss drug acting in the intestine, lipase inhibitor does not enter the bloodstream without producing central nervous side effects. Because they do not affect the metabolism system, lipase inhibitors and obesity have become one of the hot spots in recent years. Glycolic acid is a new substrate analog inhibitor with the value of the semi-inhibitory concentration of lipase is estimated to be 17.29?±?0.14?mM. Using the plots of Lineweaver-Burk, the inhibition mechanism of lipase by glycolic acid was reversible and the inhibition type belongs to competitive inhibition with a K_I value of 19.61?±?0.26?mM. The inhibitory kinetics assay showed that the microscopic velocity constant k₊₀ of inhibition kinetics is 1.79?×?10^?3?mM^?1s^?1, and k_?0 is 0.73?×?10^?3 s^?1. The results of UV full-wavelength scanning on product cumulative, fluorescence quenching and molecular simulation also indicated that glycolic acid and substrate competitive with lipase by binding to Lys137. Thereby glycolic acid inhibiting the oxidation-catalyzed reaction and reducing the product of the enzyme and substrate. This adds a new direction for the search for lipase inhibitors and provides new ideas about the development of anti-obesity drugs.

Communicated by Ramaswamy H. Sarma     

Substrate-induced stability of the lipase from candida cylindracea in reversed micelles

Summary Activity of lipase (candida cylindracea) in reversed micelles was found to be sustained over extended periods of time in the presence of amphiphilic substrates. Esterification of palmitic or oleic acid and octanol was studied to characterize the lipase activity in AOT/isooctane reversed micelles. Complete conversion was possible even in the presence of stoichiometric excess of water. In the absence of acyl substrates, the enzyme lost all its activity within a few hours in reversed micelles. Thermal effects on the enzyme activity were studied, and the enzyme stability in reversed micelles was compared to that in a bulk organic solvent.     

Crystallization and preliminary diffraction analysis of cholesterol esterase from Candida cylindracea

Cholesterol esterase (EC 3.1.1.13) from the microorganism Candida cylindracea has been crystallized in two forms. Crystals, typically 0.30 x 0.15 x 0.10 mm in size, diffract rotating anode generated x-rays to beyond 3 A are suitable for data collection for an x-ray crystallographic investigation. A monoclinic crystal form in the space group P2(1) was found to have cell dimensions of a = 122.9 A, b = 101.0 A, c = 95.2 A and beta = 108.3 degrees. The asymmetric unit of the cell contains two dimers of 129 kDa each. A second crystal form, in the triclinic space group P1, has cell dimensions of a = 58.6 A, b = 88.7 A, c = 58.6 A, alpha = 93.3 degrees, beta = 113.8 degrees and gamma = 96.0 degrees, and has one dimer per asymmetric unit.     

Immobilization of Candida cylindracea lipase on colloidal liquid aphrons (CLAs) and development of a continuous CLA-membrane reactor

A novel technique is described for the immobilization of Candida cylindracea lipase in the soapy-shell of colloidal liquid aphrons (CLAs). CLAs consist of a micron-sized solvent droplet surrounded by a thin, aqueous, soapy-film and are stabilized by a mixture of nonionic and ionic surfactants. Retention of lipase within the CLAs is primarily determined by electrostatic interactions between the surface charges on the protein and those of the anionic surfactant used (SDS) because leakage of the lipase from dispersed CLAs was reduced at low continuous phase pH (相似文献   

Glycerol acyl-transfer kinetics of a circular permutated Candida antarctica lipase B

Triacylglycerols containing a high abundance of unusual fatty acids, such as γ-linolenic acid, or novel arylaliphatic acids, such as ferulic acid, are useful in pharmaceutical and cosmeceutical applications. Candida antarctica lipase B (CALB) is quite often used for non-aqueous synthesis, although the wild-type enzyme can be rather slow with bulky and sterically hindered acyl donor substrates. The catalytic performance of a circularly permutated variant of CALB, cp283, with various acyl donors and glycerol was examined. In comparison to wild-type CALB, butyl oleate and ethyl γ-linolenate glycerolysis rates were 2.2- and 4.0-fold greater, respectively. Cp283 showed substrate inhibition by glycerol, which was not the case with the wild-type version. With either ethyl ferulate or vinyl ferulate acyl donors, cp283 matched the performance of wild-type CALB. Changes in active site accessibility resulting from circular permutation led to increased catalytic rates for bulky fatty acid esters but did not overcome the steric hindrance or energetic limitations experienced by arylaliphatic esters.