Bioactive and osteoblast cell attachment studies of novel α- and β-chitin membranes for tissue-engineering applications

Chitin is a novel biopolymer and has excellent biological properties such as biodegradation in the human body and biocompatible, bioabsorable, antibacterial and wound healing activities. In this work, α- and β-chitin membranes were prepared using α- and β-chitin hydrogel. The bioactivity studies were carried out using these chitin membranes with the simulated body fluid solution (SBF) for 7, 14 and 21 days. After 7, 14 and 21 days the membranes were characterized using SEM, EDS and FT-IR. The SEM, EDS and FT-IR studies confirmed the formation of calcium phosphate layer on the surface of the both chitin membranes. These results indicate that the prepared chitin membranes were bioactive. Cell adhesion studies were also carried out using MG-63 osteoblast-like cells. The cells were adhered and spread over the membrane after 24 h of incubation. These results indicated that the chitin membranes could be used for tissue-engineering applications.     

Preparation and characterization of novel beta-chitin-hydroxyapatite composite membranes for tissue engineering applications

Beta-chitin is a biopolymer principally found in shells of squid pen. It has the properties of biodegradability, biocompatibility, chemical inertness, wound healing, antibacterial and anti-inflammatory activities. Hydroxyapatite (HAp) is a natural inorganic component of bone and teeth and has osteoconductive property. In this work, beta-chitin-HAp composite membranes were prepared by alternate soaking of beta-chitin membranes in CaCl2 (pH 7.4) and Na2HPO4 solutions for 2 h in each solution. After 1, 3 and 5 cycles of immersion, beta-chitin membranes were characterized using the SEM, FT-IR, EDS and XRD analyses. The results showed the presence of apatite layer on surface of beta-chitin membranes, and the amounts of size and deposition of apatite layers were increased with increasing number of immersion cycles. Human mesenchymal stem cells (hMSCs) were used for evaluation of the biocompatibility of pristine as well as composite membranes for tissue engineering applications. The presence of apatite layers on the surface of beta-chitin membranes increased the cell attachment and spreading suggesting that beta-chitin-HAp composite membranes can be used for tissue engineering applications.     

Preparation,characterization, bioactive and metal uptake studies of alginate/phosphorylated chitin blend films

Alginate/phosphorylated chitin (P-chitin) blend films were prepared by mixing of 2% of alginate and P-chitin in water and then cross-linked with 4% CaCl₂ solution. The blended films were characterized by FT-IR. Then, the bioactivity of blend films was studied by biomimetic method in simulated body fluid solution (SBF) for 7, 14 and 21 days. After 7, 14 and 21 days and films were characterized by FT-IR and SEM studies. The SEM and FT-IR studies showed that the hydroxyapatite was formed on the surface of the blend films after 7, 14 and 21 days in the SBF solution. These studies confirmed that the alginate/P-chitin blend films are bioactive. Furthermore, the adsorption of Ni²⁺, Zn²⁺and Cu²⁺onto alginate/P-chitin blend films has been investigated. The parameters studied include the pH, contact time, and initial metal ion concentrations. The maximum adsorption capacity of alginate/P-chitin blend films for Ni²⁺, Zn²⁺and Cu²⁺ at pH 5.0 was found to be 5.67, 2.85 and 11.7 mg/g, respectively. These results suggest that alginate/P-chitin blend films-based technologies may be developed for water purification and metal ions separation and enrichment.     

Preparation,characterization, bioactive and cell attachment studies of α-chitin/gelatin composite membranes

The chitin/gelatin composite membranes were prepared by mixing of chitin hydrogel with gelatin. The prepared composite membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, enzymatic degradation and thermal studies. The XRD pattern of the chitin/gelatin composite membranes showed almost the same pattern as α-chitin. The bioactivity studies of these chitin/gelatin membranes were carried out with the simulated body fluid solution (SBF) for 7, 14 and 21 days followed by the characterization with the scanning electron microscopy (SEM) and Energy Dispersive Spectrum (EDS) studies. The SEM and EDS studies confirmed the formation of calcium phosphate layer on the surface of chitin/gelatin membranes. Biocompatibility of the chitin/gelatin membrane was assessed using human MG-63 osteoblast-like cells. After 48 h of incubation, it was found that the cells had attached and completely covered the membrane surface. Thus, the prepared chitin/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications.     

不同钙-醇溶解体系丝素蛋白的制备及表征研究

采用 ４种中性盐溶液 Ｃａ（ＮＯ３）２４Ｈ２Ｏ 甲醇、Ｃａ（ＮＯ３）２４Ｈ２Ｏ 乙醇、ＣａＣｌ２ 甲醇 水和 ＣａＣｌ２ 乙醇 水（摩尔比分别为 １∶２、１∶２、１∶２∶８、１∶２∶８）处理蚕丝纤维,透析后经冷冻干燥制成固体,利用ＳＤＳ ＰＡＧＥ、电镜扫描和红外光谱对制得的固体进行表征。ＳＤＳ ＰＡＧＥ结果表明：Ｃａ（ＮＯ３）２４Ｈ２Ｏ 醇体系降解丝素蛋白较 ＣａＣｌ２ 醇 水体系降解程度高;电镜扫描的结果表明 Ｃａ（ＮＯ３）２４Ｈ２Ｏ 甲醇和 ＣａＣｌ２ 乙醇 水溶解体系处理的丝素蛋白溶解比较完全,Ｃａ（ＮＯ３）２４Ｈ２Ｏ 甲醇处理的丝素蛋白冻干后为颗粒状,而 ＣａＣｌ２ 乙醇 水处理的丝素蛋白冻干后为片状。红外光谱的结果表明：４种溶液处理后的丝素蛋白构象均介于 β折叠和无规则卷曲之间,从而为丝素蛋白在药物缓释载体领域的应用提供了一定的理论依据。     

Synthesis, characterization and cytocompatibility studies of α-chitin hydrogel/nano hydroxyapatite composite scaffolds

α-chitin hydrogel/nano hydroxyapatite (nHAp) composite scaffold have been synthesized by freeze-drying approach with nHAp and α-chitin hydrogel. The prepared nHAp and nanocomposite scaffolds were characterized using DLS, SEM, FT-IR, XRD and TGA studies. The porosity, swelling, degradation, protein adsorption and biomineralization (calcification) of the prepared nanocomposite scaffolds were evaluated. Cell viability, attachment and proliferation were investigated using MG 63, Vero, NIH 3T3 and nHDF cells to confirm that the nanocomposite scaffolds were cytocompatible and cells were found to attach and spread on the scaffolds. All the results suggested that these scaffolds can be used for bone and wound tissue engineering.     

Fabrication of chitin-chitosan/nano ZrO(2) composite scaffolds for tissue engineering applications

The urge to repair and regenerate natural tissues can now be satisfactorily fulfilled by various tissue engineering approaches. Chitin and chitosan are the most widely accepted biodegradable and biocompatible materials subsequent to cellulose. The incorporation of nano ZrO₂ onto the chitin-chitosan scaffold is thought to enhance osteogenesis. Hence a nanocomposite scaffold was fabricated by lyophilization technique using chitin-chitosan with nano ZrO₂. The prepared nanocomposite scaffolds were characterized using SEM, FTIR, XRD and TGA. In addition, the swelling, degradation, biomineralization, cell viability and cell attachment of the composite scaffolds were also evaluated. The results demonstrated better swelling and controlled degradation in comparison to the control scaffold. Cell viability studies proved the non toxic nature of the nanocomposite scaffolds. Cells were found to be attached to the pore walls and spread uniformly throughout the scaffolds. All these results suggested that the developed nanocomposite scaffolds possess the prerequisites for tissue engineering scaffolds and could be used for various tissue engineering applications.     

Development of novel α-chitin/nanobioactive glass ceramic composite scaffolds for tissue engineering applications

Bioactive glass ceramic nanoparticles (nBGC) were prepared by sol–gel technique. The novel chitin/nBGC composite scaffolds were prepared using chitin gel with nBGC by lyophilization technique. The prepared nBGC and composite scaffolds were characterized using Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM), Fourier Transformed Infrared Spectroscopy (FT-IR) and X-ray diffraction (XRD). The composite scaffolds showed adequate porosity where the nBGC nanoparticles were homogenously distributed on the pore walls. The swelling, density, degradation and in vitro biomineralization capability of the composite scaffolds were also evaluated. The developed composite scaffolds showed adequate swelling and degradation properties along with its ability to become bioactive. Cytocompatability of the scaffolds was assessed using MTT assay, direct contact test and cell attachment studies. Results indicated no sign of toxicity and cells found to be attached to the pore walls offered by the scaffolds. These results suggested that the developed composite scaffold possess the prerequisites for tissue engineering scaffolds and it can be used for tissue engineering applications.     

Preparation, characterization and antimicrobial activity of a bio-composite scaffold containing chitosan/nano-hydroxyapatite/nano-silver for bone tissue engineering

In this study, a bio-composite scaffold containing chitosan/nano-hydroxyapatite/nano-silver particles (CS/nHAp/nAg) was developed by freeze drying technique, followed by introduction of silver ions in controlled amount through reduction phenomenon by functional groups of chitosan. The scaffolds were characterized using SEM, FT-IR, XRD, swelling, and biodegradation studies. The testing of the prepared scaffolds with Gram-positive and Gram-negative bacterial strains showed antibacterial activity. The scaffold materials were also found to be non-toxic to rat osteoprogenitor cells and human osteosarcoma cell line. Thus, these results suggested that CS/nHAp/nAg bio-composite scaffolds have the potential in controlling implant associated bacterial infection during reconstructive surgery of bone.     

多孔beta-磷酸三钙与磷灰石复合材料的制备及其细胞相容性研究

综合运用三维凝胶叠层法和发泡法制备了多孔β-磷酸三钙支架。将多孔支架在1．5倍模拟体液中浸泡14天,得到材料1;或者将其在氢氧化钠溶液中浸泡4天,再在1．5倍模拟体液中浸泡14天,得到材料2。测定了两种材料的物理性能,讨论了类骨磷灰石层对材料矿物组成及其显微结构等的影响。将两组材料分别与成骨前体细胞在体外复合培养,观察和测定了细胞的形态和增殖情况。结果表明复合材料的主要成分为β-磷酸三钙,表面具有结构不完整的含有碳酸磷灰石的类骨磷灰石,成骨细胞能在两组材料上正常粘附和增殖,而且材料2上的细胞粘附情况更好,说明多孔β-磷酸三钙与磷灰石的复合材料有望成为一种有应用前景的骨修复材料和骨组织工程支架材料。     

Electrospun sodium alginate/poly(ethylene oxide) core-shell nanofibers scaffolds potential for tissue engineering applications

Core-shell structure nanofibers of sodium alginate/poly(ethylene oxide) were prepared via electrospinning their dispersions in water solution. The core-shell structure morphology of the obtained nanofibers was viewed under scanning electron microscope (SEM) and transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS) analysis was used to further quantify the chemical composition of the core-shell composite SA/PEO nanofibers surface in detail. Furthermore, one-step cross-linking method through being immersed in CaCl₂ solution was investigated to improve the anti-water property of the electrospun nanofibers mats in order to facilitate their practical applications as tissue engineering scaffolds, and the changes of the structural of nanofibers before and after cross-linking was characterized by Fourier transform infrared (FT-IR). Indirect cytotoxicity assessment indicated that SA/PEO nanofibers membrane was nontoxic to the fibroblasts cells, and cell culture suggested that SA/PEO nanofibers tended to promote fibroblasts cells attachment and proliferation. It was assumed that the nanofibers membrane of electrospun SA/PEO could be used for tissue engineering scaffolds.     

Bio-composite scaffolds containing chitosan/nano-hydroxyapatite/nano-copper-zinc for bone tissue engineering

The current study involves fabrication and characterization of bio-composite scaffolds containing chitosan (CS), nano-hydroxyapatite (nHAp) and Cu-Zn alloy nanoparticles (nCu-Zn) by freeze drying technique. The fabricated composite scaffolds (CS/nHAp and CS/nHAp/nCu-Zn) were characterized by SEM, EDX, XRD and FT-IR studies. The addition of nCu-Zn in the CS/nHAp scaffolds significantly increased swelling, decreased degradation, increased protein adsorption, and increased antibacterial activity. The CS/nHAp/nCu-Zn scaffolds had no toxicity towards rat osteoprogenitor cells. So the developed CS/nHAp/nCu-Zn scaffolds have advantageous and potential applications over the CS-nHAp scaffolds for bone tissue engineering.     

5-fluorouracil loaded fibrinogen nanoparticles for cancer drug delivery applications

In this study, 5-flurouracil loaded fibrinogen nanoparticles (5-FU-FNPs) were prepared by two step coacervation method using calcium chloride as cross-linker. The prepared nanoparticles were characterized using DLS, SEM, AFM, FT-IR, TG/DTA and XRD studies. Particle size of 5-FU-FNPs was found to be 150-200 nm. The loading efficiency (LE) and in vitro drug release was studied using UV spectrophotometer. The LE of FNPs was found to be ～90%. The cytotoxicity studies showed 5-FU-FNPs were toxic to MCF7, PC3 and KB cells while they are comparatively non toxic to L929 cells. Cellular uptake of Rhodamine 123 conjugated 5-FU-FNPs was also studied. Cell uptake studies demonstrated that the nanoparticles are inside the cells. These results indicated that FNPs could be useful for cancer drug delivery.     

Synthesis, characterization and thermal properties of chitin-g-poly(epsilon-caprolactone) copolymers by using chitin gel

Chitin is known to be natural polymer and it is non-toxic, biodegradable and biocompatible. The chitin-g-poly(epsilon-caprolactone) (chitin-g-PCL) copolymer was prepared by the ring-opening polymerization of epsilon-caprolactone onto chitin gel in the presence of tin(II) 2-ethylhexanoate catalyst by bulk polymerization method under homogeneous system. The prepared copolymer were characterized by FT-IR, (13)C NMR, thermogravimetric analysis (TGA), differential thermal analysis (DTA), scanning electron microscopy (SEM), solubility and X-ray diffraction (XRD). The degree of substitution of chitin-g-PCL copolymer was found to be 0.48. The TGA analysis showed that chitin-g-PCL was slightly less thermal stability than original chitin. It was due to the grafting of PCL reduced the crystalline structure of chitin. DTA analysis of chitin-g-PCL showed the two exothermic peaks between 300 and 400 degrees C. The first peak at 342 degrees C was due to chitin peak and the second peak was due to PCL. These results suggested that chitin and PCL chains were mixed well at a molecular level. The XRD pattern analysis of chitin-g-PCL showed a weak and broader peak, which demonstrated that the conjugation of PCL with chitin suppressed the crystallization of both chitin and PCL to some extent. The SEM studies showed that the chitin gel seems have a smooth surface morphology, but the chitin-g-PCL showed slightly rough morphology due to the grafting of PCL into chitin. The surface morphology studies also confirmed the grafting reaction.     

Crystallization of calcium carbonate salts into beta-chitin scaffold

Composites of beta-chitin with calcium carbonate polymorphs were prepared by precipitation of the mineral into a chitin scaffold by means of a double diffusion system. The beta-chitin was obtained from the pen of the Loligo sp. squid. The three main polymorphs of calcium carbonate: aragonite, calcite and vaterite, were observed. Their location within the matrix is a function of the polymorph. The supersaturation inside the compartmentalized space in the chitin governs the location and polymorphism of the crystals.     

Physiological and structural modifications induced by cadmium-calcium interaction in tomato (Lycopersicon esculentum)

Tomato seedlings (Lycopersicon esculentum), initially cultivated in a basic nutrient solution during 12 days, were treated with increasing CdCl(2) concentrations for 10 days. The results showed that cadmium inhibited the weight growth depending on the metal concentration and the plant organ. In the presence of 20 microM CdCl(2), the addition of calcium, 0.1 to 10 mM of CaCl(2) in the culture medium, improved especially the biomass production and the mineral composition of the plants in concomitance with an increase in the contents of photosynthetic pigments. Histological study at the hypocotyle level revealed that cadmium (20 microM) induced a restriction of the tissue territories as well as meristem formations differentiating in a root structure. At this concentration, the addition of CaCl(2) (5 microM) was characterized by an opposite effect with absence of meristem structures. The overall results suggest that the alteration of some plant growth process after exposure to cadmium can be attenuated by an adequate calcium contribution in culture medium.     

Fabrication of chitin-chitosan/nano TiO2-composite scaffolds for tissue engineering applications

In this study, we prepared chitin-chitosan/nano TiO(2) composite scaffolds using lyophilization technique for bone tissue engineering. The prepared composite scaffold was characterized using SEM, XRD, FTIR and TGA. In addition, swelling, degradation and biomineralization capability of the composite scaffolds were evaluated. The developed composite scaffold showed controlled swelling and degradation when compared to the control scaffold. Cytocompatibility of the scaffold was assessed by MTT assay and cell attachment studies using osteoblast-like cells (MG-63), fibroblast cells (L929) and human mesenchymal stem cells (hMSCs). Results indicated no sign of toxicity and cells were found attached to the pore walls within the scaffolds. These results suggested that the developed composite scaffold possess the prerequisites for tissue engineering scaffolds and it can be used for tissue engineering applications.     

Preparation and chemical and biological characterization of a pectin/chitosan polyelectrolyte complex scaffold for possible bone tissue engineering applications

In this work, porous scaffolds obtained from the freeze-drying of pectin/chitosan polyelectrolyte complexes were prepared and characterized by FTIR, SEM and weight loss studies. Additionally, the cytotoxicity of the prepared scaffolds was evaluated in vitro, using human osteoblast cells. The results obtained showed that cells adhered to scaffolds and proliferated. The study also confirmed that the degradation by-products of pectin/chitosan scaffold are noncytotoxic.     

Functional Electrospun Poly (Lactic Acid) Scaffolds for Biomedical Applications: Experimental Conditions,Degradation and Biocompatibility Study

The electrospinning technique is a method used to produce nano and microfibers using the influence of electrostatic forces. Porous three dimensional networks of continuous and interconnected fibers as scaffolds were obtained from a poly (lactic acid) solution. The concentration of the polymeric solution, 12.5% m/w, as well as the conditions of voltage (V=11kV) and tip-metallic collector distance (H=13cm) were established to develop these scaffolds through the electrospinning process. The characteristics of the scaffolds, such as fiber diameter, sintering and the biomimetics of the characteristics of a native extra cellular matrix were verified by Scanning Electron Microscopy (SEM). The orientation induced in the material as a consequence of the electrospinning forces was studied by Differential Scanning Calorimetry (DSC) and X-Ray Diffraction (XRD).The same techniques were used to study the hydrolytic degradation of samples in a ringer solution (pH=7-7.4 at 37oC) for 12 weeks and showed evidences of superficial degradation on the microfibers. The suitability of these scaffolds for tissue engineering was studied through the primary cell culture of chondrocytes, by observing adhesion and cellular proliferation developed during 14 days of assay.     

Preparation and characterization of milk calcium salts by using casein phosphopeptide

Milk calcium salt solution was prepared by the following procedures using casein phosphopeptides (CPP). To CPP solution, 1 M citric acid, 1 M CaCl2 and 1 M K2HPO4 were added with stirring, while adjusting the pH to 6.7. The prepared solution was left for 12 hr at 25 degrees C and then used for subsequent experiments, or lyophilized. The concentrations of organic phosphate of CPP, calcium, inorganic phosphate, and citrate in the typical milk salt solution were 7, 30, 22, and 10 mM, respectively, which were close to those in bovine milk. The lyophilized sample was easily dissolved in water. No crystal structure of hydroxyapatite was shown in the lyophilized milk calcium salts by X-ray diffraction analysis, although the pattern of KCl crystal was observed. The X-ray diffraction pattern of commercial whey mineral, which was prepared by precipitation at alkaline pH from rennet whey, was similar to that of hydroxyapatite. It was confirmed by high-performance gel chromatographic analysis that the form of calcium phosphate in the milk calcium salts was similar to that of casein micelles.