Complete reversal of coenzyme specificity of xylitol dehydrogenase and increase of thermostability by the introduction of structural zinc

Pichia stipitis NAD(+)-dependent xylitol dehydrogenase (XDH), a medium-chain dehydrogenase/reductase, is one of the key enzymes in ethanol fermentation from xylose. For the construction of an efficient biomass-ethanol conversion system, we focused on the two areas of XDH, 1) change of coenzyme specificity from NAD(+) to NADP(+) and 2) thermostabilization by introducing an additional zinc atom. Site-directed mutagenesis was used to examine the roles of Asp(207), Ile(208), Phe(209), and Asn(211) in the discrimination between NAD(+) and NADP(+). Single mutants (D207A, I208R, F209S, and N211R) improved 5 approximately 48-fold in catalytic efficiency (k(cat)/K(m)) with NADP(+) compared with the wild type but retained substantial activity with NAD(+). The double mutants (D207A/I208R and D207A/F209S) improved by 3 orders of magnitude in k(cat)/K(m) with NADP(+), but they still preferred NAD(+) to NADP(+). The triple mutant (D207A/I208R/F209S) and quadruple mutant (D207A/I208R/F209S/N211R) showed more than 4500-fold higher values in k(cat)/K(m) with NADP(+) than the wild-type enzyme, reaching values comparable with k(cat)/K(m) with NAD(+) of the wild-type enzyme. Because most NADP(+)-dependent XDH mutants constructed in this study decreased the thermostability compared with the wild-type enzyme, we attempted to improve the thermostability of XDH mutants by the introduction of an additional zinc atom. The introduction of three cysteine residues in wild-type XDH gave an additional zinc-binding site and improved the thermostability. The introduction of this mutation in D207A/I208R/F209S and D207A/I208R/F209S/N211R mutants increased the thermostability and further increased the catalytic activity with NADP(+).     

Functional analysis of active site residues of Bacillus thuringiensis WB7 chitinase by site-directed mutagenesis

To investigate the roles of the active site residues in the catalysis of Bacillus thuringiensis WB7 chitinase, twelve mutants, F201L, F201Y, G203A, G203D, D205E, D205N, D207E, D207N, W208C, W208R, E209D and E209Q were constructed by site-directed mutagenesis. The results showed that the mutants F201L, G203D, D205N, D207E, D207N, W208C and E209D were devoid of activity, and the loss of the enzymatic activities for F201Y, G203A, D205E, W208R and E209Q were 72, 70, 48, 31 and 29%, respectively. The pH-activity profiles indicated that the optimum pH for the mutants as well as for the wildtype enzyme was 8.0. E209Q exhibited a broader active pH range while D205E, G203A and F201Y resulted in a narrower active pH range. The pH range of activity reduced 1 unit for D205E, and 2 units for G203A and F201Y. The temperature-activity profiles showed that the optimum temperature for other mutants as well as wildtype enzyme was 60°C, but 50°C for G203A, which suggested that G203A resulted in a reduction of thermostability. The study indicated that the six active site residues involving in mutagenesis played an important part in WB7 chitinase. In addition, the catalytic mechanisms of the six active site residues in WB7 chitinase were discussed.     

Role of the 207-218 peptide region of Moloney murine leukemia virus integrase in enzyme catalysis

X-ray diffraction data on a few retroviral integrases show a flexible loop near the active site. By sequence alignment, the peptide region 207-218 of Mo-MLV IN appears to correspond to this flexible loop. In this study, residues H208, Y211, R212, Q214, S215 and S216 of Mo-MLV IN were mutated to determine their role on enzyme activity. We found that Y211A, R212A, R212K and Q214A decreased integration activity, while disintegration and 3′-processing were not significantly affected. By contrast H208A was completely inactive in all the assays. The core domain of Mo-MLV integrase was modeled and the flexibility of the region 207-216 was analyzed. Substitutions with low integration activity showed a lower flexibility than wild type integrase. We propose that the peptide region 207-216 is a flexible loop and that H208, Y211, R212 and Q214 of this loop are involved in the correct assembly of the DNA-integrase complex during integration.     

Negatively charged residues in the N-terminal of the AID helix confer slow voltage dependent inactivation gating to CaV1.2

The E462R mutation in the fifth position of the AID (alpha1 subunit interaction domain) region in the I-II linker is known to significantly accelerate voltage-dependent inactivation (VDI) kinetics of the L-type CaV1.2 channel, suggesting that the AID region could participate in a hinged-lid type inactivation mechanism in these channels. The recently solved crystal structures of the AID-CaVbeta regions in L-type CaV1.1 and CaV1.2 channels have shown that in addition to E462, positions occupied by Q458, Q459, E461, K465, L468, D469, and T472 in the rabbit CaV1.2 channel could also potentially contribute to a hinged-lid type mechanism. A mutational analysis of these residues shows that Q458A, Q459A, K465N, L468R, D469A, and T472D did not significantly alter VDI gating. In contrast, mutations of the negatively charged E461, E462, and D463 to neutral or positively charged residues increased VDI gating, suggesting that the cluster of negatively charged residues in the N-terminal end of the AID helix could account for the slower VDI kinetics of CaV1.2. A mutational analysis at position 462 (R, K, A, G, D, N, Q) further confirmed that E462R yielded faster VDI kinetics at +10 mV than any other residue with E462R > E462K approximately E462A > E462N > wild-type approximately E462Q approximately E462G > E462D (from the fastest to the slowest). E462R was also found to increase the VDI gating of the slow CEEE chimera that includes the I-II linker from CaV1.2 into a CaV2.3 background. The fast VDI kinetics of the CaV1.2 E462R and the CEEE + E462R mutants were abolished by the CaVbeta2a subunit and reinstated when using the nonpalmitoylated form of CaVbeta2a C3S + C4S (CaVbeta2a CS), confirming that CaVbeta2a and E462R modulate VDI through a common pathway, albeit in opposite directions. Altogether, these results highlight the unique role of E461, E462, and D463 in the I-II linker in the VDI gating of high-voltage activated CaV1.2 channels.     

Role of charged residues in the S1-S4 voltage sensor of BK channels

The activation of large conductance Ca(2+)-activated (BK) potassium channels is weakly voltage dependent compared to Shaker and other voltage-gated K(+) (K(V)) channels. Yet BK and K(V) channels share many conserved charged residues in transmembrane segments S1-S4. We mutated these residues individually in mSlo1 BK channels to determine their role in voltage gating, and characterized the voltage dependence of steady-state activation (P(o)) and I(K) kinetics (tau(I(K))) over an extended voltage range in 0-50 microM [Ca(2+)](i). mSlo1 contains several positively charged arginines in S4, but only one (R213) together with residues in S2 (D153, R167) and S3 (D186) are potentially voltage sensing based on the ability of charge-altering mutations to reduce the maximal voltage dependence of P(O). The voltage dependence of P(O) and tau(I(K)) at extreme negative potentials was also reduced, implying that the closed-open conformational change and voltage sensor activation share a common source of gating charge. Although the position of charged residues in the BK and K(V) channel sequence appears conserved, the distribution of voltage-sensing residues is not. Thus the weak voltage dependence of BK channel activation does not merely reflect a lack of charge but likely differences with respect to K(V) channels in the position and movement of charged residues within the electric field. Although mutation of most sites in S1-S4 did not reduce gating charge, they often altered the equilibrium constant for voltage sensor activation. In particular, neutralization of R207 or R210 in S4 stabilizes the activated state by 3-7 kcal mol(-1), indicating a strong contribution of non-voltage-sensing residues to channel function, consistent with their participation in state-dependent salt bridge interactions. Mutations in S4 and S3 (R210E, D186A, and E180A) also unexpectedly weakened the allosteric coupling of voltage sensor activation to channel opening. The implications of our findings for BK channel voltage gating and general mechanisms of voltage sensor activation are discussed.     

Site-directed mutagenesis identifies residues in uncoupling protein (UCP1) involved in three different functions

Using site-specific mutagenesis, we have constructed several mutants of uncoupling protein (UCP1) from brown adipose tissue to investigate the function of acidic side chains at positions 27, 167, 209, and 210 in H(+) and Cl(-) transport as well as in nucleotide binding. The H(+) transport activity was measured with mitochondria and with reconstituted vesicles. These mutant UCPs (D27N, D27E, E167Q, D209N, D210N, and D209N + D210N) are expressed at near wt levels in yeast. Their H(+) transport activity in mitochondria correlates well with the reconstituted protein except for D27N (intrahelical), which shows strong inhibition of H(+) transport in the reconstituted system and only 50% decrease of uncoupled respiration in mitochondria. In the double adjacent acidic residues (between helix 4 and helix 5), mutation of D210 and of D209 decreases H(+) transport 80% and only 20%, respectively. These mutants retain full Cl(-) transport activity. The results indicate that D210 participates in H(+) uptake at the cytosolic side and D27 in H(+) translocation through the membrane. Differently, E167Q has lost Cl(-) transport activity but retains the ability to transport H(+). The separate inactivation of H(+) and Cl(-) transport argues against the fatty acid anion transport mechanism of H(+) transport by UCP. The mutation of the double adjacent acidic residues (D209, D210) decreases pH dependency for only nucleoside triphosphate (NTP) but not diphosphate (NDP) binding. The results identify D209 and D210 in accordance with the previous model as those residues which control the location of H214 in the binding pocket, and thus contribute to the pH control of NTP but not of NDP binding.     

Identification of active-site residues in Bradyrhizobium japonicum malonyl-coenzyme A synthetase

Malonyl-CoA synthetase (MCS) has been previously purified and characterized from Bradyrhizobium japonicum USDA 110. The gene encoding this enzyme is now cloned, sequenced, and expressed in Escherichia coli. The enzyme contains 509 amino acid residues, with a calculated molecular mass of 55,239 Da. The recombinant enzyme was also purified from the transformed E. coli. The enzyme was essentially indistinguishable from the MCS of B. japonicum by the criteria of polyacrylamide gel electrophoresis and biochemical properties. Based on inhibitor studies of Rhizobium trifolii MCS reported previously and database analysis, Arg173, Lys175, His211, and Glu308 were selected for site-directed mutagenesis in order to identify amino acid residues essential for substrate binding and/or catalysis. Five different mutant enzymes (R173G, K175M, H211L, K175M/H211L, and E308Q) were prepared and then subjected to steady-state kinetic studies. The kinetic data measured for the mutants suggest that Lys175 and His211 participate in the formation of malonyl-AMP, whereas Glu308 may play a role in malonate binding.     

The complete amino acid sequence of the low molecular weight cytosolic acid phosphatase

This paper presents the complete amino acid sequence of the low molecular weight acid phosphatase from bovine liver. This isoenzyme of the acid phosphatase family is located in the cytosol, is not inhibited by L-(+)-tartrate and fluoride ions, but is inhibited by sulfhydryl reagents. The enzyme consists of 157 amino acid residues, has an acetylated NH2 terminus, and has arginine as the COOH-terminal residue. All 8 half-cystine residues are in the free thiol form. The molecular weight calculated from the sequence is 17,953. The sequence was determined by characterizing the peptides purified by reverse-phase high performance liquid chromatography from tryptic, thermolytic, peptic, Staphylococcus aureus protease, and chymotryptic digests of the carboxymethylated protein. No sequence homologies were found with the two known acylphosphatase isoenzymes or the metalloproteins porcine uteroferrin and purple acid phosphatase from bovine spleen (both of which have acid phosphatase activity). Two half-cystines at or near the active site were identified through the reaction of the enzyme with [14C] iodoacetate in the presence or in the absence of a competitive inhibitor (i.e. inorganic phosphate). Ac-A E Q V T K S V L F V C L G N I C R S P I A E A V F R K L V T D Q N I S D N W V I D S G A V S D W N V G R S P N P R A V S C L R N H G I N T A H K A R Q V T K E D F V T F D Y I L C M D E S N L R D L N R K S N Q V K N C R A K I E L L G S Y D P Q K Q L I I E D P Y Y G N D A D F E T V Y Q Q C V R C C R A F L E K V R-OH.     

The role of polar interactions in the molecular recognition of CD40L with its receptor CD40.

CD40 Ligand (CD40L) is transiently expressed on the surface of T-cells and binds to CD40, which is expressed on the surface of B-cells. This binding event leads to the differentiation, proliferation, and isotype switching of the B-cells. The physiological importance of CD40L has been demonstrated by the fact that expression of defective CD40L protein causes an immunodeficiency state characterized by high IgM and low IgG serum levels, indicating faulty T-cell dependent B-cell activation. To understand the structural basis for CD40L/CD40 association, we have used a combination of molecular modeling, mutagenesis, and X-ray crystallography. The structure of the extracellular region of CD40L was determined by protein crystallography, while the CD40 receptor was built using homology modeling based upon a novel alignment of the TNF receptor superfamily, and using the X-ray structure of the TNF receptor as a template. The model shows that the interface of the complex is composed of charged residues, with CD40L presenting basic side chains (K143, R203, R207), and CD40 presenting acidic side chains (D84, E114, E117). These residues were studied experimentally through site-directed mutagenesis, and also theoretically using electrostatic calculations with the program Delphi. The mutagenesis data explored the role of the charged residues in both CD40L and CD40 by switching to Ala (K143A, R203A, R207A of CD40L, and E74A, D84A, E114A, E117A of CD40), charge reversal (K143E, R203E, R207E of CD40L, and D84R, E114R, E117R of CD40), mutation to a polar residue (K143N, R207N, R207Q of CD40L, and D84N, E117N of CD40), and for the basic side chains in CD40L, isosteric substitution to a hydrophobic side chain (R203M, R207M). All the charge-reversal mutants and the majority of the Met and Ala substitutions led to loss of binding, suggesting that charged interactions stabilize the complex. This was supported by the Delphi calculations which confirmed that the CD40/CD40L residue pairs E74-R203, D84-R207, and E117-R207 had a net stabilizing effect on the complex. However, the substitution of hydrophilic side chains at several of the positions was tolerated, which suggests that although charged interactions stabilize the complex, charge per se is not crucial at all positions. Finally, we compared the electrostatic surface of TNF/TNFR with CD40L/CD40 and have identified a set of polar interactions surrounded by a wall of hydrophobic residues that appear to be similar but inverted between the two complexes.     

Mechanism of inverted activation of ClC-1 channels caused by a novel myotonia congenita mutation

The voltage-gated chloride channel ClC-1 is the major contributor of membrane conductance in skeletal muscle and has been associated with the inherited muscular disorder myotonia congenita. Here, we report a novel mutation identified in a recessive myotonia congenita family. This mutation, Gly-499 to Arg (G499R) is located in the putative transmembrane domain 10 of the ClC-1 protein. In contrast to normal ClC-1 channels that deactivate upon hyperpolarization, functional expression of G499R ClC-1 yielded a hyperpolarization-activated chloride current when measured in the presence of a high (134 mM) intracellular chloride concentration. Current was abolished when measured with a physiological chloride transmembrane gradient. Electrophysiological analysis of other Gly-499 mutants (G499K, G499Q, and G499E) suggests that the positive charge introduced by the G499R mutation may be responsible for this unique gating behavior. To further explore the function of domain 10, we mutated two charged residues near Gly-499 of ClC-1. Functional analyses of R496Q, R496Q/G499R, R496K, and E500Q mutant channels suggest that the charged residues in domain 10 are important for normal channel function. Study of these mutants may shed further light on the structure and voltage-gating of this channel.     

Role of charged amino acids conserved in the vasoactive intestinal polypeptide/secretin family of receptors on the secretin receptor functionality

The secretin receptor is a member of a large family of G-protein-coupled receptors that recognize polypeptide hormone and/or neuropeptides. Charged, conserved residues might play a key role in their function, either by interacting with the ligand or by stabilizing the receptor structure. Of the four charged amino acids that are conserved in the whole secretin receptor family, D49 and R83 (in the N-terminal domain) were probably important for the secretin receptor structure: replacement of D49 by H or R and of R83 by D severely reduced both the maximal response to secretin and its potency. No functional secretin receptor could be detected after replacement of R83 by L. Mutation of D49 to E, A, or N had no effect or reduced 5-fold the potency of secretin. The highly conserved positive charges found at the extracellular ends of TM III (K194) and IV (R255) were important for the secretin receptor function, as K194 mutation to A or Q and R255 mutation to Q or D decreased the secretin's affinity 15- to 1000-fold, respectively. Six extracellular charged residues are conserved in closely related receptors but not in the whole family. K121 (TM I) and R277 (TM V) were not important for functional secretin receptor expression. D174 (TM II) was necessary to stabilize the active receptor structure: the D174N mutant receptors were unable to stimulate normally the adenylate cyclase in response to secretin, and functional D174A receptors could not be found. Mutation of R255, E259 (second extracellular loop), and E351 (third extracellular loop) to uncharged residues reduced only 10- to 100-fold the secretin potency without changing its efficacy: these residues either stabilized the active receptor conformation or formed hydrogen rather than ionic bonds with secretin. Mutation of K121 (TM I) to Q or L and of R277 (TM V) to E or Q did not affect the receptor functional properties.     

Rescue of aberrant gating by a genetically encoded PAS (Per-Arnt-Sim) domain in several long QT syndrome mutant human ether-á-go-go-related gene potassium channels

Congenital long QT syndrome 2 (LQT2) is caused by loss-of-function mutations in the human ether-á-go-go-related gene (hERG) voltage-gated potassium (K(+)) channel. hERG channels have slow deactivation kinetics that are regulated by an N-terminal Per-Arnt-Sim (PAS) domain. Only a small percentage of hERG channels containing PAS domain LQT2 mutations (hERG PAS-LQT2) have been characterized in mammalian cells, so the functional effect of these mutations is unclear. We investigated 11 hERG PAS-LQT2 channels in HEK293 cells and report a diversity of functional defects. Most hERG PAS-LQT2 channels formed functional channels at the plasma membrane, as measured by whole cell patch clamp recordings and cell surface biotinylation. Mutations located on one face of the PAS domain (K28E, F29L, N33T, R56Q, and M124R) caused defective channel gating, including faster deactivation kinetics and less steady-state inactivation. Conversely, the other mutations caused no measurable differences in channel gating (G53R, H70R, and A78P) or no measurable currents (Y43C, C66G, and L86R). We used a genetically encoded hERG PAS domain (NPAS) to examine whether channel dysfunction could be corrected. We found that NPAS fully restored wild-type-like deactivation kinetics and steady-state inactivation to the hERG PAS-LQT2 channels. Additionally, NPAS rescued aberrant currents in hERG R56Q channels during a dynamic ramp voltage clamp. Thus, our results reveal a putative "gating face" in the PAS domain where mutations within this region form functional channels with altered gating properties, and we show that NPAS is a general means for rescuing aberrant gating in hERG LQT2 mutant channels and may be a potential biological therapeutic.     

An extracellular RRR motif flanking the M1 transmembrane domain governs the biogenesis of homomeric neuronal nicotinic acetylcholine receptors

We have previously demonstrated that the highly conserved R209, that flanks the M1 transmembrane segment of nicotinic acetylcholine (ACh) receptors, is required for the transport of assembled homomeric neuronal α7 nicotinic ACh receptors to the cell surface. In the present paper we show that basic residues at positions 208 and 210 are necessary for the assembly of α7 receptors. On the contrary, a basic residue at position 210 of α3 subunit decreases the assembly of heteromeric neuronal α3β4 nicotinic ACh receptors. A basic residue at position 210 of the β4 subunit slightly decreases α3β4 receptor expression. We conclude that a pre-M1 RRR motif is necessary for the biogenesis of homomeric α-bungarotoxin-sensitive neuronal α7 nicotinic ACh receptors.     

The complete amino acid sequence of coagulogen isolated from Southeast Asian horseshoe crab, Carcinoscorpius rotundicauda

The complete amino acid sequence of coagulogen purified from the hemocytes of the horseshoe crab Carcinoscorpius rotundicauda was determined by characterization of the NH2-terminal sequence and the peptides generated after digestion of the protein with lysyl endopeptidase, Staphylococcal aureus protease V8 and trypsin. Upon sequencing the peptides by the automated Edman method, the following sequence was obtained: A D T N A P L C L C D E P G I L G R N Q L V T P E V K E K I E K A V E A V A E E S G V S G R G F S L F S H H P V F R E C G K Y E C R T V R P E H T R C Y N F P P F V H F T S E C P V S T R D C E P V F G Y T V A G E F R V I V Q A P R A G F R Q C V W Q H K C R Y G S N N C G F S G R C T Q Q R S V V R L V T Y N L E K D G F L C E S F R T C C G C P C R N Y Carcinoscorpius coagulogen consists of a single polypeptide chain with a total of 175 amino acid residues and a calculated molecular weight of 19,675. The secondary structure calculated by the method of Chou and Fasman reveals the presence of an alpha-helix region in the peptide C segment (residue Nos. 19 to 46), which is released during the proteolytic conversion of coagulogen to coagulin gel. The beta-sheet structure and the 16 half-cystines found in the molecule appear to yield a compact protein stable to acid and heat. The amino acid sequences of coagulogen of four species of limulus have been compared and the interspecies evolutionary differences are discussed.     

Gamma-aminobutyric acid (GABA) and pentobarbital induce different conformational rearrangements in the GABA A receptor alpha1 and beta2 pre-M1 regions

Gamma-aminobutyric acid (GABA) binding to GABA(A) receptors (GABA(A)Rs) triggers conformational movements in the alpha(1) and beta(2) pre-M1 regions that are associated with channel gating. At high concentrations, the barbiturate pentobarbital opens GABA(A)R channels with similar conductances as GABA, suggesting that their open state structures are alike. Little, however, is known about the structural rearrangements induced by barbiturates. Here, we examined whether pentobarbital activation triggers movements in the GABA(A)R pre-M1 regions. Alpha(1)beta(2) GABA(A)Rs containing cysteine substitutions in the pre-M1 alpha(1) (K219C, K221C) and beta(2) (K213C, K215C) subunits were expressed in Xenopus oocytes and analyzed using two-electrode voltage clamp. The cysteine substitutions had little to no effect on GABA and pentobarbital EC(50) values. Tethering chemically diverse thiol-reactive methanethiosulfonate reagents onto alpha(1)K219C and alpha(1)K221C affected GABA- and pentobarbital-activated currents differently, suggesting that the pre-M1 structural elements important for GABA and pentobarbital current activation are distinct. Moreover, pentobarbital altered the rates of cysteine modification by methanethiosulfonate reagents differently than GABA. For alpha(1)K221Cbeta(2) receptors, pentobarbital decreased the rate of cysteine modification whereas GABA had no effect. For alpha(1)beta(2)K215C receptors, pentobarbital had no effect whereas GABA increased the modification rate. The competitive GABA antagonist SR-95531 and a low, non-activating concentration of pentobarbital did not alter their modification rates, suggesting that the GABA- and pentobarbital-mediated changes in rates reflect gating movements. Overall, the data indicate that the pre-M1 region is involved in both GABA- and pentobarbital-mediated gating transitions. Pentobarbital, however, triggers different movements in this region than GABA, suggesting their activation mechanisms differ.     

The region from phenylalanine-17 to phenylalanine-28 of a yeast mitochondrial ATPase inhibitor is essential for its ATPase inhibitory activity.

Mitochondrial ATP synthase (F(1)F(o)-ATPase) is regulated by an intrinsic ATPase inhibitor protein. In the present study, we investigated the structure-function relationship of the yeast ATPase inhibitor by amino acid replacement. A total of 22 mutants were isolated and characterized. Five mutants (F17S, R20G, R22G, E25A, and F28S) were entirely inactive, indicating that the residues, Phe17, Arg20, Arg22, Glu25, and Phe28, are essential for the ATPase inhibitory activity of the protein. The activity of 7 mutants (A23G, R30G, R32G, Q36G, L37G, L40S, and L44G) decreased, indicating that the residues, Ala23, Arg30, Arg32, Gln36, Leu37, Leu40, and Leu44, are also involved in the activity. Three mutants, V29G, K34Q, and K41Q, retained normal activity at pH 6.5, but were less active at pH 7.2, indicating that the residues, Val29, Lys34, and Lys41, are required for the protein's action at higher pH. The effects of 6 mutants (D26A, E35V, H39N, H39R, K46Q, and K49Q) were slight or undetectable, and the residues Asp26, Glu35, His39, Lys46, and Lys49 thus appear to be dispensable. The mutant E21A retained normal ATPase inhibitory activity but lacked pH-sensitivity. Competition experiments suggested that the 5 inactivated mutants (F17S, R20G, R22G, E25A, and F28S) could still bind to the inhibitory site on F(1)F(o)-ATPase. These results show that the region from the position 17 to 28 of the yeast inhibitor is the most important for its activity and is required for the inhibition of F(1), rather than binding to the enzyme.     

Residues within transmembrane helices 2 and 5 of the human gonadotropin-releasing hormone receptor contribute to agonist and antagonist binding

To understand the ligand binding properties of the human GnRH receptor (hGnRH-R), 24 site-specific mutants within transmembrane helices (TMH) 1, 2, and 5 and the extracellular loop 2 (E2) were generated. These mutants were analyzed by using a functional reporter gene assay, monitoring receptor signaling via adenylate cyclase to a cAMP-responsive element fused to Photinus pyralis luciferase. The functional behavior of 14 receptor mutants, capable of G-protein coupling and signaling, was studied in detail with different well described agonistic and antagonistic peptide ligands. Furthermore, the binding constants were determined in displacement binding experiments with the antagonist [125I]Cetrorelix. The substitution of residues K36, Q204, W205, H207, Q208, F20, F213, F216, and S217 for alanine had no or only a marginal effect on ligand binding and signaling. In contrast, substitution of N87, Eg9, D9, R179, W206, Y211, F214, and T215 for alanine resulted in receptor proteins neither capable of ligand binding nor signal transduction. Within those mutants affecting ligand binding and signaling to various degrees, W101A, N102A, and N212Q differentiate between agonists and antagonists. Thus, in addition to N102 already described, the residues W101 in TMH2 and N212 in TMH5 are important for the architecture of the ligand-binding pocket. Based on the experimental data, three-dimensional models for binding of the superagonist D-Trp6-GnRH (Triptorelin) and the antagonist Cetrorelix to the hGnRH-R are proposed. Both decapeptidic ligands are bound to the receptor in a bent conformation with distinct interactions within the binding pocket formed by all TMHs, E2, and E3. The antagonist Cetrorelix with bulky hydrophobic N-terminal amino acids interacts with quite different receptor residues, a hint at the failure to induce an active, G protein-coupling receptor conformation.     

Residues at the outer mouth of Kir1.1 determine K-dependent gating

Three residues (E132, F127, and R128) at the outer mouth of Kir1.1b directly affected inward rectifier gating by external K, independent of pH gating. Each of the individual mutations E132Q, F127V, F127D, and R128Y changed the normal K dependence of macroscopic conductance from hyperbolic (Km = 6 ± 2 mM) to linear, up to 500 mM, without changing the hyperbolic K dependence of single-channel conductance. This suggests that E132, F127, and R128 are responsible for maximal Kir1.1b activation by external K. In addition, these same residues were also essential for recovery of Kir1.1b activity after complete removal of external K by 18-Crown-6 polyether. In contrast, charge-altering mutations at neighboring residues (E92A, E104A, D97V, or Q133E) near the outer mouth of the channel did not affect Kir1.1b recovery after chelation of external K. The collective role of E132, R128, and F127 in preventing Kir1.1b inactivation by either cytoplasmic acidification or external K removal implies that pH inactivation and the external K sensor share a common mechanism, whereby E132, R128, and F127 stabilize the Kir1.1b selectivity filter gate in an open conformation, allowing rapid recovery of channel activity after a period of external K depletion.     

Genetic selection of activatory mutations in KcsA

The KcsA potassium channel from Streptomyces lividans is one of the most actively studied ion channels. However, there are still unresolved issues about its gating mechanism in vivo because the channel is only activated by highly acidic intracellular pH, meaning that it will be mostly inactive in its host environment. In this study we have used a genetic complementation assay of K+-auxotrophic E.coli (TK2420) and S.cerevisiae (SGY1528) to identify activatory or 'gain-of-function' mutations which allow functional activity of KcsA in the physiological environment of two markedly different expression systems. These mutations clustered at the helix-bundle-crossing in both TM1 and TM2 (residues H25, L105, A108, T112, W113, F114, E118 & Q119), and include residues previously implicated in the pH-gating mechanism. We discuss how these gain-of-function mutations may result in their activatory phenotype, the relative merits of the E.coli and S.cerevisiae genetic complementation approaches for the identification of gating mutations in prokaryotic K+ channels, and ways in which this assay may be improved for future use in screening protocols.