Preparation of 6-deoxy-6-fluorocellulose

6-Deoxy-6-fluorocellulose was prepared from cellulose 2,3-diacetate (1) or cellulose 2,3-dibenzoate (2) in various solvents, and was characterized by ¹⁹F and ¹³C NMR measurements. The best product, having ds of 0.95 at C-6 and 0.04 at C-3, was prepared from cellulose 2,3-dibenzoate in nitrobenzene. Other combinations of starting material and solvent gave a lower (≈ 0.8) ds of fluorine at C-6 and higher (≈ 0.12) at C-2 or C-3. Substitution at C-2 was observed when the combination of 1 and 1,4-dioxane, or 2 and chloroform was used. The products substituted at C-2 by fluorine were relatively resistant to acid hydrolysis.     

Facile synthesis of 6-amino-6-deoxycellulose

6-Amino-6-deoxycellulose (4) was synthesized from cellulose by three reaction steps, namely bromination at C-6, displacement of bromine by azide ion, and reduction of the azide group to amino group, in 67% overall yield. The 13C NMR spectrum of compound 4 supports the expected structure for 6-amino-6-deoxycellulose. The degree of substitution of compound 4 was 0.96.     

New 6-butylamino-6-deoxycellulose and 6-deoxy-6-pyridiniumcellulose derivatives with highest regioselectivity and completeness of reaction

This paper investigates the nucleophilic substitution (S(N)) reactions of tosylcellulose with butylamine and pyridine, respectively. The S(N) reactions of tosylcellulose 1 (DS(Total) 2.02; DS(C-6) 1.0) with butylamine carried out at 25, 50, 75 and 100 degrees C in both dimethyl sulfoxide (DMSO) and pure butylamine showed that the regioselectivity of substitution at C-6 of cellulose is temperature dependent: the highest regioselectivity at C-6 can be reached at 25 and 50 degrees C; substitution at C-2 also occurred at 75 and 100 degrees C. The substitution speed in pure butylamine is greater than that in the presence of DMSO. A complete and regioselective substitution at C-6 with a DS of 1.0 was obtained under the conditions of 50 degrees C, 40 h in butylamine. The substitution reactions of 1 with pyridine carried out at 25, 50, 75 and 100 degrees C for 24h in DMSO did not occur. In contrast to this the S(N) reactions done in pure pyridine showed that a temperature- and steric-dependent, regioselective substitution took place at C-6 at temperatures from 25 to 145 degrees C. The highest regioselectivity and completeness at C-6 can be obtained at 100 degrees C for 90 h, whereas at 145 degrees C substitution also occurs at C-2. The results were proved by 1H NMR and 13C NMR spectroscopy.     

Syntheses of stable isotope-labeled 6 beta-hydroxycortisol, 6 beta-hydroxycortisone,and 6 beta-hydroxytestosterone

A method is described for the preparation of two types of multi-labeled 6 beta-hydroxycortisol containing either five deuterium atoms at C-19 methyl and C-1 methylene or four 13C atoms at C-1, C-2, C-4, and C-19 in addition to the five deuterium atoms for use as analytical internal standards for gas chromatography-mass spectrometry (GC-MS). BMD derivatives of [1,1,19,19,19-2H(5)]cortisone and [1,2,4,19-13C(4),1,1,19,19,19-2H(5)]cortisone (cortisone-2H(5)-BMD and cortisone-13C(4),2H(5)-BMD) were first synthesized via indan synthon method starting from optical active 11-oxoindanylpropionic acid and labeled isopropenyl anion ([1,1,3,3,3-2H(5)]- or [1,3-13C(2),1,1,3,3,3-2H(5)]isopropenyl anion). The labeled isopropenyl anion was prepared from commercially available [1,1,1,3,3,3-2H(6)]- or [1,3-13C(2),1,1,1,3,3,3-2H(6)]acetone. Ultraviolet (UV) irradiated autoxidation at C-6 position of 3-ethyl-3,5-dienol ether derivatives of the labeled cortisone-BMDs gave 6 beta-hydroxy-[1,1,19,19,19-2H(5)]cortisone-BMD and 6 beta-hydroxy-[1,2,4,19-13C(4),1,1,19,19,19-2H(5)]cortisone-BMD, respectively, as a mixture of 6 beta- and 6 alpha-epimers in a ratio of 4:1. Separation of 6 beta- and 6 alpha-epimers by thin-layer chromatography (TLC) and subsequent hydrolysis of the BMD group at C-17 gave pure labeled 6 beta-hydroxycortisone. After protecting the keto group at C-3 of the labeled 6 beta-hydroxycortisone-BMD as semicarbazone, reduction of 11-keto group with NaBH(4) and subsequent removal of the C-3 and C-17 protecting groups gave 6beta-hydroxy-[1,1,19,19,19-2H(5)]cortisol (6 beta-hydroxycortisol-2H(5)) and 6 beta-hydroxy-[1,2,4,19-13C(4),1,1,19,19,19-2H(5)]cortisol (6 beta-hydroxycortisol-13C(4),2H(5)), respectively, as a mixture of 6 beta- and 6 alpha-epimers (6 beta:6 alpha=4.4:1). The isotopic compositions of 6 beta-hydroxycortisol-2H(5) and 6 beta-hydroxycortisol-13C(4),2H(5) were 90.9 and 92.1 at.%, respectively. Furthermore, 6 beta-hydroxy-[1 alpha,16,16,17 alpha-2H(4)]testosterone was synthesized by the UV irradiated autoxidation at C-6 position of 3-ethyl-3,5-dienol ether derivative of deuterium-labeled testosterone ([1 alpha,16,16,17 alpha-2H(4)]testosterone) obtained by using catalytic deuteration and hydrogen-deuterium exchange reactions.     

Cytotoxic activity of 6-alkynyl- and 6-alkenylpurines

6-Alkynyl- and 6-alkenylpurines have been screened for cytotoxic activity against a human chronic myelogenous leukemia cell line; K-562 cells using a [(3)H]-thymidine incorporation assay. Most alkynes displayed cytotoxicity comparable to, or better than, the known anticancer drugs 6-mercaptopurine and fludarabine. The 6-alkenylpurines, which are promising plant growth stimulators and 15-lipoxygenase inhibitors, exhibited only low toxicity.     

Synthesis and Properties of 6-Deoxy-6-mercapto-d-glucosamine

6-Deoxy-6-mcrcapto-α-d-glucosamine hydrochloride was synthesized from N-anisylidene-1,3,4-tri-O-acetyl-6-O-tosyl-β-d-glucosamine, and some of its properties were compared with those of α-d-glucosamine hydrochloride.     

Preparation of 6-azafulleroid-6-deoxy-2,3-di-O-myristoylcellulose

6-Azafulleroid-6-deoxy-2,3-di-O-myristoylcellulose (3) was synthesized from 6-azido-6-deoxycellulose (1) by two reaction steps. The myristoylation of compound 1 with myristoyl chloride/pyridine proceeded smoothly to give 6-azido-6-deoxy-2,3-di-O-myristoylcellulose (2) in 97.0% yield. The reaction of compound 2 with fullerene (C₆₀) was carried out by microwave heating to afford compound 3 in high yield. It was found from FT-IR, ¹³C NMR, UV–vis, differential pulse voltammetry (DPV), SEC analyses that compound 3 was the expected C₆₀-containing polymer. Consequently, maximum degree of substitution of C₆₀ (DS_C60) of compound 3 was 0.33.     

Syntheses of (+/-)-methyl 6'alpha-demethyl-6'alpha-cyanoabscisate and (+/-)-methyl 6'alpha-demethyl-6'alpha-methoxycarbonylabscisate

New abscisic acid analogs possessing a cyano or methoxycarbonyl group at the 6'alpha-position of methyl abscisate were synthesized by regioselective hydrocyanation. These compounds had weak activity in the rice second leaf sheath elongation test.     

6-Methylcryptoacetalide, 6-methyl-epicryptoacetalide and 6-methylcryptotanshinone from Salvia aegyptiaca

From the whole plant of Salvia aegyptiaca, 6-methylcryptoacetalide, 6-methyl-epicryptoacetalide and 6-methylcryptotanshinone have been isolated and characterized, mainly by spectroscopic means. In addition to these novel diterpenoids, the known compounds 3beta-hydroxy-olean-12-en-28-oic acid, 3beta-hydroxy-oleana-11,13(18)-dien-28-oic acid, sitosterol-3beta-glucoside, sitosterol, stigmasterol, 5-hydroxy-7,3',4'-trimethoxyflavone and 5, 6-dihydroxy-7,3',4'-trimethoxyflavone were isolated.     

6C6鼠-人嵌合抗体的纯化及鉴定

采用基因工程技术 ,将小鼠 6C6单克隆抗体可变区基因与人抗体恒定区基因连接 ,构建了鼠 人 6C6嵌合抗体基因 ,并在CHO细胞中高效表达 .利用ProteinA亲和层析柱从细胞培养上清中分离纯化 6C6嵌合抗体 ,得到电泳纯度大于 98%的 6C6嵌合抗体 ,其重链 (5 5kD)和轻链 (2 4kD)符合IgG相对分子质量的理论值 .Western印迹、细胞免疫荧光和免疫组织化学实验结果均呈阳性 .表明6C6嵌合抗体可识别人乳腺癌细胞表面上的肿瘤相关抗原 ,保持了 6C6单克隆抗体的特性 ,为后续的研究工作奠定了基础     

Synthesis of 6-formyluridine 5'-monophosphate: 6-formyl-UMP

A synthesis of 6-formyluridine 5'-monophosphate (6-formylUMP) in 6 steps starting from uridine is described. This approach should be applicable to the preparation of other O5'-phosphorylated 6-formylUrds such as 6-formylUDP and 6-formylUTP.     

Repair of O6-G-alkyl-O6-G interstrand cross-links by human O6-alkylguanine-DNA alkyltransferase

O (6)-Alkylguanine-DNA alkyltransferase (AGT) plays an important role by protecting cells from alkylating agents. This reduces the frequency of carcinogenesis and mutagenesis initiated by such agents, but AGT also provides a major resistance mechanism to some chemotherapeutic drugs. To improve our understanding of the AGT-mediated repair reaction and our understanding of the spectrum of repairable damage, we have studied the ability of AGT to repair interstrand cross-link DNA damage where the two DNA strands are joined via the guanine- O (6) in each strand. An oligodeoxyribonucleotide containing a heptane cross-link was repaired with initial formation of an AGT-oligo complex and further reaction of a second AGT molecule yielding a hAGT dimer and free oligo. However, an oligodeoxyribonucleotide with a butane cross-link was a very poor substrate for AGT-mediated repair, and only the first reaction that forms an AGT-oligo complex could be detected. Models of the reaction of these substrates in the AGT active site show that the DNA duplex is forced apart locally to repair the first guanine. This reaction is greatly hindered with the butane cross-link, which is mostly buried in the active site pocket and limited in conformational flexibility. This limitation also prevents the adoption of a conformation for the second reaction to repair the AGT-oligo complex. These results are consistent with the postulated mechanism of AGT repair that involves DNA binding and flipping of the substrate nucleotide and indicate that hAGT can repair some types of interstrand cross-link damage.