Synthesis and fluorescence studies of thiazole orange tethered onto oligonucleotide: development of a self-contained DNA biosensor on a fiber optic surface

Thiazole orange dyes were derivatized with ethylene glycol linkers of various lengths, and were covalently linked to the 5' end of the oligonucleotides after solid-phase synthesis. The labeled oligonucleotides exhibited enhanced fluorescence upon hybridization to complementary DNA sequences at the surfaces of optical fibers, providing for a self-contained labeling strategy. It was determined that the melt temperatures of DNA hybrids using one mixed polypyrimidine base oligonucleotide sequence were dependent on the length of the tethers, and that the melt temperature could be shifted by more than 10 degrees C when tethers were introduced.     

DNA hybridization assays using metal-enhanced fluorescence

We describe a new approach to DNA hybridization assays using metal-enhanced fluorescence. Thiolated oligonucleotides were bound to silver particles on a glass substrate. Addition of a complementary fluorescein-labeled oligonucleotide resulted in a dramatic time-dependent 12-fold increase in fluorescence intensity during hybridization. Proximity to silver particles resulted in a decreased fluorescence lifetime. This effect is thought to be the result of enhanced fluorescence from fluorescein near metallic silver particles. Hybridization could thus be measured from the decay kinetics of the emission, which can be measured independently from the emission intensity. These results suggest the use of silver particles as a general approach to measure DNA hybridization as a method to increase the sensitivity of DNA detection.     

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.     

Use of pteridine nucleoside analogs as hybridization probes

The pteridine nucleoside analog 3-methyl isoxanthopterin (3-MI) is highly fluorescent, with a quantum yield of 0.88, and it can be synthesized as a phosphoramidite and incorporated into oligonucleotides through a deoxyribose linkage. Within an oligonucleotide, 3-MI is intimately associated with native bases and its fluorescence is variably quenched in a sequence-dependent manner. Bend ing, annealing, binding, digestion or cleavage of fluorophore-containing oligonucleotides can be detected by monitoring changes in fluorescence properties. We developed a single step method for detecting annealing of complementary DNA sequences using 3-MI-containing oligonucleotides as hybridization probes. One of the complementary strands contains the fluorophore as an insertion and when annealing occurs, the fluorophore bulges out from the double strand, resulting in increased fluorescence intensity. We have examined the sequence dependency, optimal strand length and impact of multiple fluorophores per strand in terms of brightness and impact on the annealing process. We describe the application of this technique to the detection of positive PCR products using an HIV-1 detection system. This sequence-dependent hybridization technique can result in fluorescence intensity increases of up to 27-fold. Fluorescence intensity increases are only seen upon specific binding to bulge-generating complements, removing issues of high background from non-specific binding.     

Measuring thermodynamic details of DNA hybridization using fluorescence

Modern real-time PCR systems make it easy to monitor fluorescence while temperature is varied for hundreds of samples in parallel, permitting high-throughput studies. We employed such system to investigate melting transitions of ordered nucleic acid structures into disordered random coils. Fluorescent dye and quencher were attached to oligonucleotides in such a way that changes of fluorescence intensity with temperature indicated progression of denaturation. When fluorescence melting data were compared with traditional ultraviolet optical experiments, commonly used dye/quencher combinations, like fluorescein and tetramethylrhodamine, showed substantial discrepancies. We have therefore screened 22 commercially available fluorophores and quenchers for their ability to reliably report annealing and melting transitions. Dependence of fluorescence on temperature and pH was also investigated. The optimal performance was observed using Texas Red or ROX dyes with Iowa Black RQ or Black Hole quenchers. These labels did not alter two-state nature of duplex melting process and provided accurate melting temperatures, free energies, enthalpies, and entropies. We also suggest a new strategy for determination of DNA duplex thermodynamics where concentration of a dye-labeled strand is kept constant and its complementary strand modified with a quencher is added at increasing excess. These methodological improvements will help build predictive models of nucleic acid hybridization.     

Syntheses and properties of fluorescent labeled oligonucleotides containing deoxyethenoadenosine at 5' end.

The fluorescent labeled oligodeoxyribonucleotides which contain deoxyethenoadenosione (d epsilon A) at their 5' end were prepared by treating CPG bound oligonucleotides with 5'-DMTr-deoxyethenoadenosine-3'-H-phosphonate. The hybrid formation of d epsilon A-oligonucleotide with its complementary DNA was studied by fluorescence spectroscopy. The fluorescence of d epsilon A in a single strand was largely quenched by stacking interaction with the base at 3' position. When d epsilon A-oligonucleotides hybridized with their complementary strands, relative fluorescence quantum yields (Qrel) against d epsilon A changed in specific manners. These results suggest that d epsilon A-oligonucleotides are applicable to study the local structure of DNA in solution.     

Fluorescent Oligonucleotides Can Serve As Suitable Alternatives to Radiolabeled Oligonucleotides

Prolonged exposure to radiation from radionuclei used in medical research can cause DNA damage and mutation, which lead to several diseases including cancer. Radioactivity-based experiments are expensive and associated with specialized training, dedication of instruments, approvals, and cleanup with potential hazardous waste. The objective of this study was to find an alternative to the use of radioactivity in medical research using nucleic acid chemistry. FITC-labeled oligonucleotides that contain wild-type (wt) and modified base (8-oxo-G) at the same position and their complementary unlabeled strand were synthesized. Purified DNA repair enzyme, OGG1, and nuclear lysates from MCF-7 breast cancer cells were incubated with double-stranded FITC-labeled wt and 8-oxo-G oligonucleotide to demonstrate the OGG1 incision assay. We found that FITC-coupled oligonucleotides do not impose a steric hindrance during duplex formation, and the fluorescence intensity of the oligonucleotide is comparable with the intensity of the radioactive oligonucleotide. Moreover, we have seen that the OGG1 incision assay can be performed using these fluorescence oligonucleotides, replacing conventional use of radiolabeled oligonucleotides in the assay. Although the use of fluorescent-labeled oligonucleotides was described in detail for incision assays, the technique can be applied to replace a broad range of experiments, where radioactive oligonucleotides are used, eliminating the hazardous consequences of radiation.     

Hybridization of synthetic oligodeoxyribonucleotides to phi chi 174 DNA: the effect of single base pair mismatch.

Oligodeoxyribonucleotides complementary to the DNA of the wild type (wt) bacteriophage phi chi 174 have been synthesized by the phosphotriester method. The oligomers, 11, 14, and 17 bases long, are complementary to the region of the DNA which accounts for the am-3 point mutation. When hybridized to am-3 DNA, the oligonucleotides form duplexes with a single base pair mismatch. The thermal stability of the duplexes formed between wt and am-3 DNAs has been measured. The am-3 DNA:oligomer duplexes dissociate at a temperature about 10 degrees C lower than the corresponding wt DNA:oligomer duplexes. This dramatic decrease in thermal stability due to a single mismatch makes it possible to eliminate the formation of the mismatched duplexes by the appropriate choice of hybridization temperature. These results are discussed with respect to the use of oligonucleotides as probes for the isolation of specific cloned DNA sequences.     

Oligonucleotides, part 5+: synthesis and fluorescence studies of DNA oligomers d(AT)5 containing adenines covalently linked at C-8 with dansyl fluorophore.

The synthesis of oligodeoxynucleotides d(AT)5 in which specific adenines are linked at C-8 position with dansyl fluorophores via a variable polymethylene spacer chain are reported. This was achieved by a strategy involving prelabelling at the monomeric stage followed by solid phase assembly of oligonucleotides to obtain regiospecifically labeled oligonucleotides. Several mono and polydansyl d(AT)5 derivatives in which the fluorophore is linked via ethylene, tetramethylene and hexamethylene spacer arms were synthesised for a systematic study of their fluorescence characteristics. It was observed that (i) enhancements in fluorescence intensity and emission quantum yields are seen due to multiple labelling, (ii) the magnitude of enhancements are related to labelling configuration and (iii) quenching efficiency is minimal with shorter and rigid spacer arms. The results may aid rational design of multiple fluorescent DNA probes for nonradioactive detection of nucleic acids.     

Preparation of DNA and protein micro arrays on glass slides coated with an agarose film

A thin layered agarose film on microscope slides provides a versatile support for the preparation of arrayed molecular libraries. An activation step leading to the formation of aldehyde groups in the agarose creates reactive sites that allow covalent immobilization of molecules containing amino groups. Arrays of oligonucleotides and PCR products were prepared by tip printing. After hybridization with complementary fluorescence labeled nucleic acid probes strong fluorescence signals of sequence-specific binding to the immobilized probes were detected. The intensity of the fluorescence signals was proportional to the relative amount of immobilized oligonucleotides and to the concentration of the fluorescence labeled probe. We also used the agarose film-coated slides for the preparation of protein arrays. In combination with specific fluorescence labeled antibodies these protein arrays can be used for fluorescence linked immune assays. With this approach different protein tests can be performed in parallel in a single reaction with minimal amounts of the binding reagents.     

Development of dansyl-modified oligonucleotide probes responding to structural changes in a duplex

We have synthesized a nonnucleoside amidite block of dansyl fluorophore to prepare dansyl-modified oligonucleotides (ONTs). The fluorescence intensities of dansyl-ONT specifically increased by the presence of adjacent guanosine residues but, significantly reduced in a dansyl-flipping duplex. These changes were caused by solvatochromism effect due to the number of guanine which is hydrophobic functional group and the external environment of dansyl group. The fluorescence intensities could be plotted as a function of the ONTs concentrations and the increase in the fluorescence was observed to equimolar concentrations of target DNA. This duplex exhibited higher melting temperature relative to the corresponding duplexes containing other base pairs. Similar changes in fluorescence could be detected upon hybridization with complementary RNAs. Thus, the dansyl-modified ONTs provide sequence specific fluorescent probe of DNA and RNA.     

Encoded metal nanoparticle-based molecular beacons for multiplexed detection of DNA

In this paper we describe a molecular beacon format assay in which encoded nanowire particles are used to achieve multiplexing. We demonstrate this principle with the detection of five viral pathogens; Hepatitis A virus, Hepatitis C virus, West Nile Virus, Human Immune Deficiency virus and Severe Acute Respiratory Syndrome virus. Oligonucleotides are designed complementary to a target sequence of interest containing a 3′ universal fluorescence dye. A 5′ thiol causes the oligonucleotides to self-assemble onto the metal nanowire. The single-stranded oligonucleotide contains a self-complementary hairpin stem sequence of 10 bases that forces the 3′ fluorophore to come into contact with the metallic nanowire surface, thereby quenching the fluorescence. Upon addition of target DNA, there is hybridization with the complementary oligonucleotides. The resulting DNA hybrid is rigid, unfolds the hairpin structure, and causes the fluorophore to be moved away from the surface such that it is no longer quenched. By using differently encoded nanowires, each conjugated with a different oligonucleotide sequence, multiplexed DNA assays are possible using a single fluorophore, from a multiplexed RT-PCR reaction.     

Fluorescent-labeled oligonucleotides that exhibit a measurable signal in the presence of complementary DNA.

Oligonucleotide derivatives with a fluorescent dye were designed for exhibiting a measurable signal only when they bind to complementary DNA in aqueous solution. The oligonucleotide with a dansyl group at the specific 2'-sugar residue was synthesized by using the protected 2'-dansylaminouridine phosphorobisamidite. The dansyl-oligonucleotide conjugate binds to its complementary DNA to form duplex with a normal stability and exhibits enhanced fluorescence together with a blue-shift in emission maxima after the hybridization. Another possible candidate involved the use of pyrene-excimer emission upon forming ternary complex between two pyrene-labeled oligonucleotide probes with target DNA. A new and general method for introduction of a pyrene fluorophore into the 3'- or 5'-terminal hydroxyl group of oligonucleotides via different linkers was developed.     

Sequence-dependent thermodynamic parameters for locked nucleic acid (LNA)-DNA duplex formation

The design of modified nucleic acid probes, primers, and therapeutics is improved by considering their thermodynamics. Locked nucleic acid (LNA) is one of the most useful modified backbones, with incorporation of a single LNA providing a substantial increase in duplex stability. In this work, the hybridization DeltaH(o), DeltaS(o), and melting temperature (T(M)) were measured from absorbance melting curves for 100 duplex oligonucleotides with single internal LNA nucleotides on one strand, and the results provided DeltaDeltaH(o), DeltaDeltaS(o), DeltaDelta, and DeltaT(M) relative to reference DNA oligonucleotides. LNA pyrimidines contribute more stability than purines, especially A(L), but there is substantial context dependence for each LNA base. Both the 5' and 3' neighbors must be considered in predicting the effect of an LNA incorporation, with purine neighbors providing more stability. Enthalpy-entropy compensation in DeltaDeltaH(o) and DeltaDeltaS(o) is observed across the set of sequences, suggesting that LNA can stabilize the duplex by either preorganization or improved stacking, but not both simultaneously. Singular value decomposition analysis provides predictive sequence-dependent rules for hybridization of singly LNA-substituted DNA oligonucleotides to their all-DNA complements. The results are provided as sets of DeltaDeltaH(o), DeltaDeltaS(o), and DeltaDelta parameters for all 32 of the possible nearest neighbors for LNA+DNA:DNA hybridization (5' MX(L) and 5' X(L)N, where M, N, and X = A, C, G, or T and X(L) represents LNA). The parameters are applicable within the standard thermodynamic prediction algorithms. They provide T(M) estimates accurate to within 2 degrees C for LNA-containing oligonucleotides, which is significantly better accuracy than previously available.     

Prediction of melting temperatures in fluorescence in situ hybridization (FISH) procedures using thermodynamic models

The thermodynamics and kinetics of DNA hybridization, i.e. the process of self-assembly of one, two or more complementary nucleic acid strands, has been studied for many years. The appearance of the nearest-neighbor model led to several theoretical and experimental papers on DNA thermodynamics that provide reasonably accurate thermodynamic information on nucleic acid duplexes and allow estimation of the melting temperature. Because there are no thermodynamic models specifically developed to predict the hybridization temperature of a probe used in a fluorescence in situ hybridization (FISH) procedure, the melting temperature is used as a reference, together with corrections for certain compounds that are used during FISH. However, the quantitative relation between melting and experimental FISH temperatures is poorly described. In this review, various models used to predict the melting temperature for rRNA targets, for DNA oligonucleotides and for nucleic acid mimics (chemically modified oligonucleotides), will be addressed in detail, together with a critical assessment of how this information should be used in FISH.     

Sequencing by hybridization with the generic 6-mer oligonucleotide microarray: an advanced scheme for data processing

DNA sequencing by hybridization was carried out with a microarray of all 4(6) = 4,096 hexadeoxyribonucleotides (the generic microchip). The oligonucleotides immobilized in 100 x 100 x 20-microm polyacrylamide gel pads of the generic microchip were hybridized with fluorescently labeled ssDNA, providing perfect and mismatched duplexes. Melting curves were measured in parallel for all microchip duplexes with a fluorescence microscope equipped with CCD camera. This allowed us to discriminate the perfect duplexes formed by the oligonucleotides, which are complementary to the target DNA. The DNA sequence was reconstructed by overlapping the complementary oligonucleotide probes. We developed a data processing scheme to heighten the discrimination of perfect duplexes from mismatched ones. The procedure was united with a reconstruction of the DNA sequence. The scheme includes the proper definition of a discriminant signal, preprocessing, and the variational principle for the sequence indicator function. The effectiveness of the procedure was confirmed by sequencing, proofreading, and nucleotide polymorphism (mutation) analysis of 13 DNA fragments from 31 to 70 nucleotides long.     

Stabilization of the immobilized linkers and DNA probes for DNA microarray fabrication by end-capping of the remaining unreacted silanol on the glass

High stability of the oligonucleotides immobilized on the glass is essential for the reliable DNA microarray analysis. In the present study, effect of end-capping of the unreacted silanol, remaining after the surface amine-functionalization, was explored: (1) Cy3-NHS (N-hydorxysuccinincimide) dye was spotted on the surface and change in the fluorescent intensity was measured. (2) DNA probes were immobilized by the reactivity of oxanine linked at the 5’-end, the complementary oligonucleotides with Cy5-fluorescence at the 5’-end was hybridized, and the time-dependence of the fluorescence intensity was observed. Both the systems showed improved stability of the immobilized molecules, indicative of the stabilization by end-capping.     

Heterogeneity of the 5' terminus of hen ovalbumin messenger ribonucleic acid.

The 5'-terminal sequence of hen ovalbumin mRNA was investigated using a novel labeling method. Ovalbumin mRNA was purified by hybridization to complementary DNA coupled to cellulose. The mRNA thus purified was shown to be 97.9% pure by hybridization with plasmid DNA containing sequences to the messengers coding for conalbumin and ovomucoid, the next two most abundant messengers of oviduct. After digestion with RNase T1 and alkaline phosphatase, 5'-terminal capped oligonucleotides were selected by binding to anti-m7G-Sepharose. These were then labeled using RNA ligase and [5'-32P]pCp, separated by two-dimensional gel electrophoresis, and sequenced by partial digestion with base-specific ribonucleases. A nested set of three capped oligonucleotides was identified. Their structures and relative abundances were m7GpppAUACAG, 3% m7GpppACAUACAG, 61+; and m7GpppGUACAUACAG, 36%.