Crystal structures of an archaeal class I CCA-adding enzyme and its nucleotide complexes

CCA-adding enzymes catalyze the addition of CCA onto the 3' terminus of immature tRNAs without using a nucleic acid template and have been divided into two classes based on their amino acid sequences. We have determined the crystal structures of a class I CCA-adding enzyme from Archeoglobus fulgidus (AfCCA) and its complexes with ATP, CTP, or UTP. Although it and the class II bacterial Bacillus stearothermophilus CCA enzyme (BstCCA) have similar dimensions and domain architectures (head, neck, body, and tail), only the polymerase domain is structurally homologous. Moreover, the relative orientation of the head domain with respect to the body and tail domains, which appear likely to bind tRNA, differs significantly between the two enzyme classes. Unlike the class II BstCCA, this enzyme binds nucleotides nonspecifically in the absence of bound tRNA. The shape and electrostatic charge distribution of the AfCCA enzyme suggests a model for tRNA binding that accounts for the phosphates that are protected from chemical modification by tRNA binding to AfCCA. The structures of the AfCCA enzyme and the eukaryotic poly(A) polymerase are very similar, implying a close evolutionary relationship between them.     

Unusual synthesis by the Escherichia coli CCA-adding enzyme

The tRNA 3' end contains the conserved CCA sequence at the 74-76 positions. The CCA sequence is synthesized and maintained by the CCA-adding enzymes. The specificity of the Escherichia coli enzyme at each of the 74-76 positions was investigated using synthetic minihelix substrates that contain permuted 3' ends. Results here indicate that the enzyme has the ability to synthesize unusual 3' ends. When incubated with CTP alone, the enzyme catalyzed the addition of C74, C75, C76, and multiple Cs. Although the addition of C74 and C75 was as expected, that of C76 and multiple Cs was not. In particular, the addition of C76 generated CCC, which would have conflicted with the biological role of the enzyme. However, the presence of ATP prevented the synthesis of CCC and completely switched the specificity to CCA. The presence of ATP also had an inhibitory effect on the synthesis of multiple Cs. Thus, the E. coli CCA enzyme can be a poly(C) polymerase but its synthesis of poly(C) is regulated by the presence of ATP. These features led to a model of CCA synthesis that is independent of a nucleic acid template. The synthesis of poly(C) by the CCA-adding enzyme is reminiscent of that of poly(A) by poly(A) polymerase and it provides a functional rationale for the close sequence relationship between these two enzymes in the family of nucleotidyltransferases.     

Molecular basis for maintenance of fidelity during the CCA-adding reaction by a CCA-adding enzyme

CCA-adding enzyme builds the 3'-end CCA of tRNA without a nucleic acid template. The mechanism for the maintenance of fidelity during the CCA-adding reaction remains elusive. Here, we present almost a dozen complex structures of the class I CCA-adding enzyme and tRNA mini-helices (mini-D(73)N(74), mini-D(73)N(74)C(75) and mini-D(73)C(74)N(75); D(73) is a discriminator nucleotide and N is either A, G, or U). The mini-D(73)N(74) complexes adopt catalytically inactive open forms, and CTP shifts the enzymes to the active closed forms and allows N(74) to flip for CMP incorporation. In contrast, unlike the catalytically active closed form of the mini-D(73)C(74)C(75) complex, the mini-D(73)N(74)C(75) and mini-D(73)C(74)N(75) complexes adopt inactive open forms. Only the mini-D(73)C(74)U(75) accepts AMP to a similar extent as mini-D(73)C(74)C(75), and ATP shifts the enzyme to a closed, active form and allows U(75) to flip for AMP incorporation. These findings suggest that the 3'-region of RNA is proofread, after two nucleotide additions, in the closed, active form of the complex at the AMP incorporation stage. This proofreading is a prerequisite for the maintenance of fidelity for complete CCA synthesis.     

CCA-adding enzymes and poly(A) polymerases are all members of the same nucleotidyltransferase superfamily: characterization of the CCA-adding enzyme from the archaeal hyperthermophile Sulfolobus shibatae.

We describe the purification, cloning, and characterization of the CCA-adding enzyme [ATP(CTP):tRNA nucleotidyl transferase] from the thermophilic archaebacterium, Sulfolobus shibatae. Characterization of an archaeal CCA-adding enzyme provides formal proof that the CCA-adding activity is present in all three contemporary kingdoms. Antibodies raised against recombinant, expressed Sulfolobus CCA-adding enzyme reacted specifically with the 48-kDa protein and fully depleted all CCA-adding activity from S. shibatae crude extract. Thus, the cloned cca gene encodes the only CCA-adding activity in S. shibatae. Remarkably, the archaeal CCA-adding enzyme exhibits no strong homology to either the eubacterial or eukaryotic CCA-adding enzymes. Nonetheless, it does possess the active site signature G[SG][LIVMFY]xR[GQ]x5,6D[LIVM][CLIVMFY]3-5 of the nucleotidyltransferase superfamily identified by Holm and Sander (1995, Trends Biochem Sci 20:345-347) and sequence comparisons show that all known CCA-adding enzymes and poly(A) polymerases are contained within this superfamily. Moreover, we propose that the superfamily can now be divided into two (and possibly three) subfamilies: class I, which contains the archaeal CCA-adding enzyme, eukaryotic poly(A) polymerases, and DNA polymerase beta; class II, which contains eubacterial and eukaryotic CCA-adding enzymes, and eubacterial poly(A) polymerases; and possibly a third class containing eubacterial polynucleotide phosphorylases. One implication of these data is that there may have been intraconversion of CCA-adding and poly(A) polymerase activities early in evolution.     

The structure of an archaeal pilus

Bacterial pili are involved in a host of activities, including motility, adhesion, transformation, and immune escape. Structural studies of these pili have shown that several distinctly different classes exist, with no common origin. Remarkably, it is now known that the archaeal flagellar filament appears to have a common origin with the bacterial type IV pilus, and assembly in both systems involves hydrophobic N-terminal α-helices that form three-stranded coils in the center of these filaments. Recent work has identified further genes in archaea as being similar to bacterial type IV pilins, but the function or structures formed by such gene products was unknown. Using electron cryo-microscopy, we show that an archaeal pilus from Methanococcus maripaludis has a structure entirely different from that of any of the known bacterial pili. Two subunit packing arrangements were identified: one has rings of four subunits spaced by ∼ 44 Å and the other has a one-start helical symmetry with ∼ 2.6 subunits per turn of a ∼ 30 Å pitch helix. Remarkably, these schemes appear to coexist within the same filaments. For the segments composed of rings, the twist between adjacent rings is quite variable, while for the segments having a one-start helix there is a large variability in both the axial rise and the twist per subunit. Since this pilus appears to be assembled from a type IV pilin-like protein with a hydrophobic N-terminal helix, it provides yet another example of how different quaternary structures can be formed from similar building blocks. This result has many implications for understanding the evolutionary divergence of bacteria and archaea.     

Crystal structure of an archaeal actin homolog

Prokaryotic homologs of the eukaryotic structural protein actin, such as MreB and ParM, have been implicated in determination of bacterial cell shape, and in the segregation of genomic and plasmid DNA. In contrast to these bacterial actin homologs, little is known about the archaeal counterparts. As a first step, we expressed a predicted actin homolog of the thermophilic archaeon Thermoplasma acidophilum, Ta0583, and determined its crystal structure at 2.1A resolution. Ta0583 is expressed as a soluble protein in T.acidophilum and is an active ATPase at physiological temperature. In vitro, Ta0583 forms sheets with spacings resembling the crystal lattice, indicating an inherent propensity to form filamentous structures. The fold of Ta0583 contains the core structure of actin and clearly belongs to the actin/Hsp70 superfamily of ATPases. Ta0583 is approximately equidistant from actin and MreB on the structural level, and combines features from both eubacterial actin homologs, MreB and ParM. The structure of Ta0583 co-crystallized with ADP indicates that the nucleotide binds at the interface between the subdomains of Ta0583 in a manner similar to that of actin. However, the conformation of the nucleotide observed in complex with Ta0583 clearly differs from that in complex with actin, but closely resembles the conformation of ParM-bound nucleotide. On the basis of sequence and structural homology, we suggest that Ta0583 derives from a ParM-like actin homolog that was once encoded by a plasmid and was transferred into a common ancestor of Thermoplasma and Ferroplasma. Intriguingly, both genera are characterized by the lack of a cell wall, and therefore Ta0583 could have a function in cellular organization.     

Hfq stimulates the activity of the CCA-adding enzyme

Background  

The bacterial Sm-like protein Hfq is known as an important regulator involved in many reactions of RNA metabolism. A prominent function of Hfq is the stimulation of RNA polyadenylation catalyzed by E. coli poly(A) polymerase I (PAP). As a member of the nucleotidyltransferase superfamily, this enzyme shares a high sequence similarity with an other representative of this family, the tRNA nucleotidyltransferase that synthesizes the 3'-terminal sequence C-C-A to all tRNAs (CCA-adding enzyme). Therefore, it was assumed that Hfq might not only influence the poly(A) polymerase in its specific activity, but also other, similar enzymes like the CCA-adding enzyme.     

Structural basis for the hyperthermostability of an archaeal enzyme induced by succinimide formation

Stability of proteins from hyperthermophiles (organisms existing under boiling water conditions) enabled by a reduction of conformational flexibility is realized through various mechanisms. A succinimide (SNN) arising from the post-translational cyclization of the side chains of aspartyl/asparaginyl residues with the backbone amide -NH of the succeeding residue would restrain the torsion angle Ψ and can serve as a new route for hyperthermostability. However, such a succinimide is typically prone to hydrolysis, transforming to either an aspartyl or β-isoaspartyl residue. Here, we present the crystal structure of Methanocaldococcus jannaschii glutamine amidotransferase and, using enhanced sampling molecular dynamics simulations, address the mechanism of its increased thermostability, up to 100°C, imparted by an unexpectedly stable succinimidyl residue at position 109. The stability of SNN109 to hydrolysis is seen to arise from its electrostatic shielding by the side-chain carboxylate group of its succeeding residue Asp110, as well as through n → π¹ interactions between SNN109 and its preceding residue Glu108, both of which prevent water access to SNN. The stable succinimidyl residue induces the formation of an α-turn structure involving 13-atom hydrogen bonding, which locks the local conformation, reducing protein flexibility. The destabilization of the protein upon replacement of SNN with a Φ-restricted prolyl residue highlights the specificity of the succinimidyl residue in imparting hyperthermostability to the enzyme. The conservation of the succinimide-forming tripeptide sequence (E(N/D)(E/D)) in several archaeal GATases strongly suggests an adaptation of this otherwise detrimental post-translational modification as a harbinger of thermostability.     

Novel predominant archaeal and bacterial groups revealed by molecular analysis of an anaerobic sludge digester

A culture-independent molecular phylogenetic approach was used to study prokaryotic diversity in an anaerobic sludge digester. Two 16S rRNA gene libraries were constructed using total genomic DNA, and amplified by polymerase chain reaction (PCR) using primers specific for archaeal or bacterial domains. Phylogenetic analysis of 246 and 579 almost full-length 16S rRNA genes for Archaea and Bacteria, respectively, was performed using the ARB software package. Phylogenetic groups affiliated with the Archaea belong to Euryarchaeota and Crenarchaeota. Interestingly, we detected a novel monophyletic group of 164 clones representing 66.6% of the archaeal library. Culture enrichment and probe hybridization show that this group grows better under formate or H2-CO2. Within the bacterial library 95.6% of the operational taxonomic units (OTUs) represent novel putative phylotypes never described before, and affiliated with eight divisions. The Bacteroidetes phylum is the most abundant and diversified phylogenetic group representing 38.8% of the OTUs, followed by the gram-positives (27.7%) and the Proteobacteria (21.3%). Sequences affiliated with phylogenetic divisions represented by few cultivated representatives such as the Chloroflexi, Synergistes, Thermotogales or candidate divisions such as OP9 and OP8 are represented by <5% of the total OTUs. A comprehensive set of 15 16S and 23S rRNA-targeted oligonucleotide hybridization probes was used to quantify these major groups by dot blot hybridization within 12 digester samples. In contrast to the clone library, Firmicutes and Actinobacteria together accounted for 21.8 +/- 14.9% representing the most abundant phyla. They were surprisingly followed by the Chloroflexi representing 20.2 +/- 4.6% of the total 16S rRNA. The Proteobacteria and the Bacteroidetes group accounted for 14.4 +/- 4.9% and 14.5 +/- 4.3%, respectively, WWE1, a novel lineage, accounted for 11.9 +/- 3.1% while Planctomycetes and Synergistes represented <2% each. Using the novel set of probes we extended the coverage of bacterial populations from 52% to 85.3% of the total rRNA within the digester samples.     

Divergent substrate-binding mechanisms reveal an evolutionary specialization of eukaryotic prefoldin compared to its archaeal counterpart

Prefoldin (PFD) is a molecular chaperone that stabilizes and then delivers unfolded proteins to a chaperonin for facilitated folding. The PFD hexamer has undergone an evolutionary change in subunit composition, from two PFDalpha and four PFDbeta subunits in archaea to six different subunits (two alpha-like and four beta-like subunits) in eukaryotes. Here, we show by electron microscopy that PFD from the archaeum Pyrococcus horikoshii (PhPFD) selectively uses an increasing number of subunits to interact with nonnative protein substrates of larger sizes. PhPFD stabilizes unfolded proteins by interacting with the distal regions of the chaperone tentacles, a mechanism different from that of eukaryotic PFD, which encapsulates its substrate inside the cavity. This suggests that although the fundamental functions of archaeal and eukaryal PFD are conserved, their mechanism of substrate interaction have diverged, potentially reflecting a narrower range of substrates stabilized by the eukaryotic PFD.     

Insights into enzyme evolution revealed by the structure of methylaspartate ammonia lyase.

Methylaspartate ammonia lyase (MAL) catalyzes the magnesium-dependent reversible alpha,beta-elimination of ammonia from L-threo-(2S,3S)-3-methylaspartic acid to mesaconic acid. The 1.3 A MAD crystal structure of the dimeric Citrobacter amalonaticus MAL shows that each subunit comprises two domains, one of which adopts the classical TIM barrel fold, with the active site at the C-terminal end of the barrel. Despite very low sequence similarity, the structure of MAL is closely related to those of representative members of the enolase superfamily, indicating that the mechanism of MAL involves the initial abstraction of a proton alpha to the 3-carboxyl of (2S,3S)-3-methylasparic acid to yield an enolic intermediate. This analysis resolves the conflict that had linked MAL to the histidine and phenylalanine ammonia lyase family of enzymes.     

Crystal structure of an archaeal intein-encoded homing endonuclease PI-PfuI

Inteins possess two different enzymatic activities, self-catalyzed protein splicing and site-specific DNA cleavage. These endonucleases, which are classified as part of the homing endonuclease family, initiate the mobility of their genetic elements into homologous alleles. They recognize long asymmetric nucleotide sequences and cleave both DNA strands in a monomer form. We present here the 2.1 A crystal structure of the archaeal PI-PfuI intein from Pyroccocus furiosus. The structure reveals a unique domain, designated here as the Stirrup domain, which is inserted between the Hint domain and an endonuclease domain. The horseshoe-shaped Hint domain contains a catalytic center for protein splicing, which involves both N and C-terminal residues. The endonuclease domain, which is inserted into the Hint domain, consists of two copies of substructure related by an internal pseudo 2-fold axis. In contrast with the I-CreI homing endonuclease, PI-PfuI possibly has two asymmetric catalytic sites at the center of a putative DNA-binding cleft formed by a pair of four-stranded beta-sheets. DNase I footprinting experiments showed that PI-PfuI covers more than 30 bp of the substrate asymmetrically across the cleavage site. A docking model of the DNA-enzyme complex suggests that the endonuclease domain covers the 20 bp DNA duplex encompassing the cleavage site, whereas the Stirrup domain could make an additional contact with another upstream 10 bp region. For the double-strand break, the two strands in the DNA duplex were cleaved by PI-PfuI with different efficiencies. We suggest that the cleavage of each strand is catalyzed by each of the two non-equivalent active sites.     

Catalytic center of an archaeal type 2 ribonuclease H as revealed by X-ray crystallographic and mutational analyses

The catalytic center of an archaeal Type 2 RNase H has been identified by a combination of X-ray crystallographic and mutational analyses. The crystal structure of the Type 2 RNase H from Thermococcus kodakaraensis KOD1 has revealed that the N-terminal major domain adopts the RNase H fold, despite the poor sequence similarity to the Type 1 RNase H. Mutational analyses showed that the catalytic reaction requires four acidic residues, which are well conserved in the Type 1 RNase H and the members of the polynucleotidyl transferase family. Thus, the Type 1 and Type 2 RNases H seem to share a common catalytic mechanism, except for the requirement of histidine as a general base in the former enzyme. Combined with the results from deletion mutant analyses, the structure suggests that the C-terminal domain of the Type 2 RNase H is involved in the interaction with the DNA/RNA hybrid.     

Glucose-6-phosphate dehydrogenase. Characteristics revealed by the rat liver enzyme structure

The primary structure of glucose-6-phosphate dehydrogenase from rat liver has been determined, showing the mature polypeptide to consist of 513 amino acid residues, with an acyl-blocked N-terminus. This structure is homologous to those of both other eutherian and marsupial mammals (human and opossum), thus characterizing a mammalian type enzyme to which the human form, notwithstanding its large number of genetic variants, conforms. The mammalian type differs from the fruit fly enzyme by about 50%. Known mutant forms exhibit further differences, widely distributed along the polypeptide chain. Structural patterns show glucose-6-phosphate dehydrogenases to consist of a few variable regions intermixed with relatively constant segments.