Degradation of formaldehyde in packed-bed bioreactor by kissiris-immobilized Ralstonia eutropha

The ability of the Ralstonia eutropha cells to utilize formaldehyde (FA) as the only source of carbon and energy was studied in the kissiris-immobilized cell bioreactor (KICB) in batch-recirculation and continuous modes of operation. In batch-recirculation experiments, the test bacterium could tolerate concentrations of FA up to 1,400 mg/L at 30°C and aeration rate equal to 0.75 vvm (r _S = 7.25 mg/L/h, q S = 0.019 g_FA/g_cell/h). However, further increase of initial FA concentration resulted in degradation reaction of FA to stop at 1,600 mg/L. Results of continuous mode experiments showed that the biodegradation performance of the KICB was dependent on both feed flow rate and inlet FA concentration parameters. The optimum feed flow rate which corresponded to the highest biodegradation rate (r _S = 240.3 mg/L/h) was observed at Q = 18 mL/min when KICB did not operate under the external mass transfer limiting regime. Substrate inhibition kinetics (Edwards and Luong equations) were used to describe the experimental specific degradation rates data. According to the Luong model, the values of the maximum specific degradation rate (q _max), half-saturation coefficient (K _S), the maximum allowable FA concentration (S _m), and the shape factor (n) were 0.178 g_FA/g_cell/h, 250.9 mg/L, 1,600 mg/L, and 1.86, respectively.     

Kinetic and stoichiometric characterization of organoautotrophic growth of Ralstonia eutropha on formic acid in fed‐batch and continuous cultures

Formic acid, acting as both carbon and energy source, is a safe alternative to a carbon dioxide, hydrogen and dioxygen mix for studying the conversion of carbon through the Calvin–Benson–Bassham (CBB) cycle into value-added chemical compounds by non-photosynthetic microorganisms. In this work, organoautotrophic growth of Ralstonia eutropha on formic acid was studied using an approach combining stoichiometric modeling and controlled cultures in bioreactors. A strain deleted of its polyhydroxyalkanoate production pathway was used in order to carry out a physiological characterization. The maximal growth yield was determined at 0.16 Cmole Cmole⁻¹ in a formate-limited continuous culture. The measured yield corresponded to 76% to 85% of the theoretical yield (later confirmed in pH-controlled fed-batch cultures). The stoichiometric study highlighted the imbalance between carbon and energy provided by formic acid and explained the low growth yields measured. Fed-batch cultures were also used to determine the maximum specific growth rate (μ_max = 0.18 h⁻¹) and to study the impact of increasing formic acid concentrations on growth yields. High formic acid sensitivity was found in R eutropha since a linear decrease in the biomass yield with increasing residual formic acid concentrations was observed between 0 and 1.5 g l⁻¹.     

Influence of COD/NH3–N ratio on organic removal and nitrification using a modified RBC

Synthetic wastewaters were prepared with different influent concentrations of ammonia nitrogen (NH₃–N) and COD and the treatment studies were conducted using a rotating biological contactor (RBC). If organic removal and nitrification can be simultaneously effected in one process, it will be an ideal solution to water pollution control. The RBC used in the present study was a four stage laboratory model and the discs were modified by attaching porous netlon sheets to enhance biofilm area. The COD loads (S ₀) used were about 1000 and 1500?mg/l whereas NH₃–N concentrations used were in the range of 20 to 185?mg/l. Hydraulic load (q) of 0.03?m³?.?m^-2?.?d^-1 and ammonia nitrogen loadings in the range of 0.66 to 5.5?g NH₃–N?.?m^-2?.?d^-1 were used. The RBC was operated at two different rotating speeds of 6 and 12?rpm. The results showed that the nitrification and percentage of COD removal were not affected up to the value of the COD/NH₃–N in the range from 47 to 23 at w=6?rpm and for an average influent COD of 1003?mg/l. Beyond that range only the nitrification rate decreased much whereas the percentage of COD removal was not affected. Similarly, at an influent COD load of 1557?mg/l, the nitrification and percentage COD removal were not affected for the value of the COD/NH₃–N in the range from 44 to 23 but beyond that range only the nitrification rate decreased while the percentage of COD removal was approximately constant and still high. A correlation plot between the NH₃–N removed and NH₃–N applied was presented at a rotating speed of 6?rpm and it was found that the nitrification rate of 3.93?g NH₃–N?.?m^-2?.?d^-1 was achieved at ammonia loading of 5.55?g NH₃–N?.?m^-2?.?d^-1. Also the results at w=12?rpm showed improvement of nitrification rate over those at 6?rpm.     

氨氮对3种吸附态亚硝化单胞菌的抑制动力学

[背景] 氨氮浓度会明显影响亚硝化单胞菌的活性,但氨氮浓度对吸附态亚硝化单胞菌菌种的抑制动力学尚缺乏研究。[目的] 研究氨氮浓度对3种吸附态亚硝化单胞菌（Nitrosomonas eutropha CZ-4、Nitrosomonas halophila C-19和Nitrosomonas europaea SH-3）的影响。[方法] 以碳酸钙作为吸附基质,设定氨氮浓度为25-1 000 mg/L,测定3种亚硝化单胞菌（N.eutropha CZ-4、N. halophila C-19和N. europaea SH-3）的亚硝氮积累速率与最大比生长速率,并通过Edwares2模型建立氨氧化的抑制动力学方程。[结果] N. halophila C-19在初始氨氮浓度为50-100 mg/L时的亚硝氮积累最快,N. europaea SH-3的亚硝氮积累则在初始氨氮浓度为50-200 mg/L时最快,而N. eutropha CZ-4则适于在初始氨氮浓度为50-400 mg/L时积累亚硝氮;N. eutropha CZ-4的最大比生长速率出现在初始氨氮浓度为50-400 mg/L时,明显高于N. halophila C-19（25-100 mg/L）,而N. europaea SH-3的生长速度在初始氨氮浓度为50-800 mg/L区间内无显著差异;N. europaea SH-3的K_I（922.76 mg/L）显著高于N. eutropha CZ-4（597.88 mg/L）,而CZ-4的K_I又显著高于N. halophila C-19（186.24 mg/L）,N. europaea SH-3的K_m（72.06 mg/L）显著高于N. halophila C-19（23.23 mg/L）。[结论] 3种吸附态亚硝化单胞菌的生长和氨氧化对氨氮浓度变化的响应存在明显差异,对于认识不同亚硝化单胞菌在不同氨氮浓度污水中的功能并开发相应的工程技术具有重要意义。     

Suppression of Plant Growth by Nitrogen Dioxide

Nicotiana glutinosa and pinto bean seedlings (Phaseolus vulgaris) were exposed for short periods (3 days or less) to high concentrations of NO₂ (4.11-20.53 mg/m³ to compare the resulting leaf lesions with ozone damage produced at concentrations of 0.43 to 0.86 mg/m³. Although the same physiological age leaf tissue was damaged by both toxicants, damage caused by NO₂ was unlike that caused by ozone.

Pinto bean (Phaseolus vulgaris) and Pearson improved tomato (Lycopersicon esculentum) seedlings were continuously exposed for 10 to 22 days, to low concentrations of NO₂ (less than 1.03 mg/m³). These exposures caused significant growth suppression, increase in green color (total chlorophyll content), and distortion of leaves.

     

Productivity, carbon dioxide uptake and net energy return of microalgal bubble column photobioreactors

This work examined the energy return of Chlorella vulgaris and Dunaliella tertiolecta cultivated in a gas-sparged photobioreactor design where the power input for sparging was manipulated (10, 20, and 50 W m⁻³). Dry weight, organic carbon and heating values of the biomass were measured, plus a suite of variables including Fv/Fm and dissolved oxygen. A model for predicting the higher heating value of microalgal biomass was developed and used to measure the energetic performance of batch cultivations. High power inputs enhanced maximum biomass yields, but did not improve the energy return. Cultivation in 10 W m⁻³ showed up to a 39% higher cumulative net energy return than 50 W m⁻³, and increased the cumulative net energy ratio up to fourfold. The highest net energy ratio for power input was 19.3 (D. tertiolecta, 12% CO₂, 10 W m⁻³). These systems may be a sustainable method of biomass production, but their effectiveness is sensitive to operational parameters.     

Optimized production of Pichia guilliermondii biomass with zinc accumulation by fermentation

Zinc is an essential nutrient that plays an important role in several biological processes of living organisms. When bound to an organic substrate, Zn is more efficiently absorbed by organisms, has a high biological activity and a low toxicity. Due to its ability to incorporate metals, yeast biomass has been used frequently as a delivery vehicle for many mineral supplements. This study describes the screening of strains of yeast for production of biomass enriched with Zn by submerged fermentation. Five strains of yeasts, belonging to the genera Saccharomyces, Kluyveromyces and Pichia, were evaluated. The highest Zn concentration was 6820 mg/kg of dry weight biomass, using Pichia guilliermondii Wickerham LPB 063 after 120 h of cultivation in a medium with 0.5 g/L ZnSO₄. Process conditions were optimized using statistical experimental design methodology. Four parameters were identified in the 2⁸⁻⁴ fractional factorial design as having a significant effect on Zn accumulation: ZnSO₄ and Fe₂(SO₄)₃ concentrations, time of addition of the ZnSO₄ solution and concentration of soybean molasses. In the 3² experimental design, the influence of ZnSO₄ and Fe₂(SO₄)₃ concentrations were studied more closely. The highest Zn concentration (75,090 mg/kg dry weight) in the biomass was reached using the conditions: ZnSO₄, 10.0 g/L; Fe₂(SO₄)₃, 0.1 g/L in Erlenmeyer flasks. A batch liquid fermentation was carried out in a 2 L bioreactor for production of P. guilliermondii Wickerham LPB 063 containing organically bound Zn. The concentration of organically bound Zn after 144 h of fermentation was of 96,030 mg/kg, with a biomass production of 30 g/L. The maximum specific growth rate obtained (μ_max) was 0.0077/h, while the maximum productivity of biomass was at 0.1511 g/L/h.     

Productivity and nutrient uptake of water hyacinth,Eichhornia crassipes I. Effect of nitrogen source

Water hyacinth,Eichhornia crassipes, growth and nutrient uptake rates, as influenced by different N sources and N transformations, were measured using microcosm aquaculture systems. Net productivity was highest in the system receiving equal amounts of NH₄ ⁺ and NO₃ ^- (at 10 mg N 1^-1 each) and decreased in the order of NO₃ ^-, NH₄ ⁺, urea (added at 20 mg N 1^-1 each), and methane digestor effluent (at 6 mg N 1^-1). During the first 7-wk study (average ambient air temperature was 26–28°C), biomass yields were in the range of 19–53 g dry wt m^-2 day^-1, while between the 8th and 12th wk (average ambient air temperature was 16–22°C), biomass yields were in the range of 10–33 g dry wt m^-2 day^-1. In the systems with either NH₄ ⁺ or NO₃ ^-, or both added in equal proportions, about 14–20% of the total yield was contributed by roots, whereas in the system with urea and digestor effluent, roots contributed about 23 and 44% of the total yield, respectively. Nitrogen and P uptake per unit area followed trends similar to biomass yields. Nitrogen uptake rates were in the range of 533–2, 161 mg N m^-2 day^-1 for the systems receiving NH₄ ⁺, NO₃ ^-, and urea, while uptake rates were in the range of 124–602 mg N m^-2 day^-1 for the system receiving methane digestor effluent. Phosphorus uptake rates were found to be in the range of 59–542 mg P m^-2 day^-1. Under the most favorable conditions, maximum recorded biomass yield was 53 g dry wt m^-2 day^-1, with N and P removal rate of 2,161 mg N m^-2 day^-1 and 542 mg P m^-2 day^-1, indicating the potential of water hyacinth to produce large amounts of biomass which can be potentially used as a feedstock to produce methane.     

Integrative network analysis reveals active microRNAs and their functions in gastric cancer

Background

Ralstonia eutropha H16, found in both soil and water, is a Gram-negative lithoautotrophic bacterium that can utillize CO₂ and H₂ as its sources of carbon and energy in the absence of organic substrates. R. eutropha H16 can reach high cell densities either under lithoautotrophic or heterotrophic conditions, which makes it suitable for a number of biotechnological applications. It is the best known and most promising producer of polyhydroxyalkanoates (PHAs) from various carbon substrates and is an environmentally important bacterium that can degrade aromatic compounds. In order to make R. eutropha H16 a more efficient and robust biofactory, system-wide metabolic engineering to improve its metabolic performance is essential. Thus, it is necessary to analyze its metabolic characteristics systematically and optimize the entire metabolic network at systems level.

Results

We present the lithoautotrophic genome-scale metabolic model of R. eutropha H16 based on the annotated genome with biochemical and physiological information. The stoichiometic model, RehMBEL1391, is composed of 1391 reactions including 229 transport reactions and 1171 metabolites. Constraints-based flux analyses were performed to refine and validate the genome-scale metabolic model under environmental and genetic perturbations. First, the lithoautotrophic growth characteristics of R. eutropha H16 were investigated under varying feeding ratios of gas mixture. Second, the genome-scale metabolic model was used to design the strategies for the production of poly[R-(-)-3hydroxybutyrate] (PHB) under different pH values and carbon/nitrogen source uptake ratios. It was also used to analyze the metabolic characteristics of R. eutropha when the phosphofructokinase gene was expressed. Finally, in silico gene knockout simulations were performed to identify targets for metabolic engineering essential for the production of 2-methylcitric acid in R. eutropha H16.

Conclusion

The genome-scale metabolic model, RehMBEL1391, successfully represented metabolic characteristics of R. eutropha H16 at systems level. The reconstructed genome-scale metabolic model can be employed as an useful tool for understanding its metabolic capabilities, predicting its physiological consequences in response to various environmental and genetic changes, and developing strategies for systems metabolic engineering to improve its metabolic performance.     

Limnological studies of the lakes and streams of the upper Qu'Appelle River System,Saskatchewan, Canada

High phytoplankton productivity characterizes the eutrophic lakes of the upper Qu'Appelle River system. Annual primary production varied from 187 to 561 g C m^? while daily areal production varied from 290 to 8 575 mg C m^?2. The A_max range was 164 to 315 mg C m^?3h^?1 with the highest rates usually occurring in August or September. A_max values on any given day normally occurred in the top 0.5 m. Blue-green algae (Aphanizomenon flos-aquae, Microcystis aeruginosa, Oscillatoria prolifica) dominated the phytoplankton communities during the summer and fall. Diatoms (Asterionella formosa, Fragilaria capucina, Stephanodiscus niagarae) often dominated the spring communities but sometimes persisted as dominants through the summer. Fragilaria on occasion was present at very high concentrations in the late fall. Ceratium hirundinella was sometimes dominant but was usually an important part of the biomass. Green algae, although always present, rarely formed an important part of the biomass with Pediastrum duplex the only exception. A species list is appended.     

Light-limited algal growth in Lake Loosdrecht: steady state studies in laboratory scale enclosures

Phytoplankton growth in the shallow, turbid Lake Loosdrecht (The Netherlands) is importantly influenced by light availability, and thus the concentrations of the various light-attenuating materials. The system is highly eutrophic and supports an algal biomass of ca. 160 mg Chl m^–3. A model is proposed here which predicts algal growth in the lake as a function of the light received and subsequent attenuation in the water column by phytoplankton, tripton and background colour. The model is based on an energy balance which relates growth rate to the true growth yield on light energy and the energy demand for cell maintenance. The coefficients for energy conversion (Y = 0.002 gDW kJ^–1) and cell maintenance (µ_e = 0.031 day^–1) were determined from steady state growth kinetics of Prochlorothrix hollandica in light-limited laboratory flow systems with the same depth as the lake and receiving summer average conditions of irradiance. Light attenuation by phytoplankton and tripton were quantified using specific attenuation coefficients: 0.011 m² mg^–1 Chl for the phytoplankton and 0.23 m² g^–1 DW for tripton.The growth studies demonstrated that Lake Loosdrecht can support a much higher algal biomass in the absence of non-algal particulate matter. The proposed model is used to predict chlorophyll a concentrations in dependence on growth rate and levels of tripton. Since approximately 75% of the sestonic dry weight in Lake Loosdrecht may be attributed to tripton, it is concluded that the algal biomass is markedly lowered by the abundance of tripton in the water column. A knowledge of the sources and fate of tripton in the lake is thus of fundamental importance in modelling phytoplankton dynamics.     

Soil fertility and fine root dynamics in response to 4 years of nutrient (N,P, K) fertilization in a lowland tropical moist forest,Panama

The question of how tropical trees cope with infertile soils has been challenging to address, in part, because fine root dynamics must be studied in situ. We used annual fertilization with nitrogen (N as urea, 12.5 g N m^?2 year^?1), phosphorus (P as superphosphate, 5 g P m^?2 year^?1) and potassium (K as KCl, 5 g K m^?2 year^?1) within 38 ha of old‐growth lowland tropical moist forest in Panama and examined fine root dynamics with minirhizotron images. We expected that added P, above all, would (i) decrease fine root biomass but, (ii) have no impact on fine root turnover. Soil in the study area was moderately acidic (pH = 5.28), had moderate concentrations of exchangeable base cations (13.4 cmol kg^?1), low concentrations of Bray‐extractable phosphate (PO₄ = 2.2 mg kg^?1), and modest concentrations of KCl‐extractable nitrate (NO₃ = 5.0 mg kg^?1) and KCl‐extractable ammonium (NH₄ = 15.5 mg kg^?1). Added N increased concentrations of KCl‐extractable NO₃ and acidified the soil by one pH unit. Added P increased concentrations of Bray‐extractable PO₄ and P in the labile fraction. Concentrations of exchangeable K were elevated in K addition plots but reduced by N additions. Fine root dynamics responded to added K rather than added P. After 2 years, added K decreased fine root biomass from 330 to 275 g m^?2. The turnover coefficient of fine roots <1 mm diameter ranged from 2.6 to 4.4 per year, and the largest values occurred in plots with added K. This study supported the view that biomass and dynamics of fine roots respond to soil nutrient availability in species‐rich, lowland tropical moist forest. However, K rather than P elicited root responses. Fine roots smaller than 1 mm have a short lifetime (<140 days), and control of fine root production by nutrient availability in tropical forests deserves more study.     

Peculiarities of summer phytoplankton spatial distribution in Onega Bay of the White Sea under local hydrophysical conditions

The species composition and phytoplankton biomass, concentrations of chlorophyll “a” (Chl) and nutrients in the surface water layer, and accompanying hydrophysical conditions were studied in Onega Bay of the White Sea in June 2015. The temperature and salinity of surface water layer and the water column stability varied greatly in the bay. The nutrients' concentrations exceeded the limiting threshold necessary for the phytoplankton development. The phytoplankton abundance was relatively low, averaged as 13.46 ± 9.00 mg C/m³ (total phytoplankton biomass), 0.78 ± 0.43 mg/m³ (concentration of chlorophyll “a”), and 0.18 ± 0.27 mg C/m³ (picophytoplankton biomass). The highest phytoplankton biomass has been registered along the frontal zones. Three phytoplankton communities that differed significantly in their structure have been found.     

BTEX removal in a horizontal-flow anaerobic immobilized biomass reactor under denitrifying conditions

Because benzene, toluene, ethylbenzene, and xylenes (BTEX) and ethanol are important contaminants present in Brazilian gasoline, it is essential to develop technology that can be used in the bioremediation of gasoline-contaminated aquifers. This paper evaluates the performance of a horizontal-flow anaerobic immobilized biomass (HAIB) reactor fed with water containing gasoline constituents under denitrifying conditions. Two HAIB reactors filled with polyurethane foam matrices (5 mm cubes, 23 kg/m³ density and 95 % porosity) for biomass attachment were assayed. The reactor fed with synthetic substrate containing protein, carbohydrates, sodium bicarbonate and BTEX solution in ethanol, at an Hydraulic retention time (HRT) of 13.5 h, presented hydrocarbon removal efficiencies of 99 % at the following initial concentrations: benzene 6.7 mg/L, toluene 4.9 mg/L, m-xylene and p-xylene 7.2 mg/L, ethylbenzene 3.7 mg/L, and nitrate 60 mg N/L. The HAIB reactor fed with gasoline-contaminated water at an HRT of 20 h showed hydrocarbon removal efficiencies of 96 % at the following initial concentrations: benzene, 4.9 mg/L; toluene, 7.2 mg/L; m-xylene, 3.7 mg/L; and nitrate 400 mg N/L. Microbiological observations along the length of the HAIB reactor fed with gasoline-contaminated water confirmed that in the first segment of the reactor, denitrifying metabolism predominated, whereas from the first sampling port on, the metabolism observed was predominantly methanogenic.     

Mathematical modeling of production of microbial lipids

As a part of the investigations on the microbial lipid production using the yeast Rhodotorula gracilis, CFR-1, kinetics of the biomass synthesis has been studied using shake flask experiments. Using a medium containing a carbon to nitrogen ratio of 701, the rates of biomass production were followed at different initial substrate concentrations in the range of 20–100 kg/m³. A logistic model was found to be reasonably adequate to describe the kinetics of the growth of biomass; the maximum specific growth rate of 0.105 h^–1 was applicable for substrate concentrations less than 60 kg/m³, which gave reasonable agreement between predicted and actual biomass concentration values.List of Symbols S ₀, X ₀ kg/m³ Initial concentrations of sugar, non lipid biomass respectively - X, X(t) kg/m³ Concentrations of non lipid biomass at any time t - dX/dt kg/(m³ · h) Rate of biomass growth - h^–1 Specific growth rate - _max h^–1 Maximum specific growth rate - K _s mol/dm³ Monods constant - X _max kg/m³ Maximum biomass reached in a run     

Full assessment of Sida (Sida hermaphrodita) biomass as a solid fuel

Due to an increased awareness of climate change and limited fossil resources, the demand for alternative energy carriers such as biomass has risen significantly during the past years. This development is supported by the idea of a transition to a bio‐based economy reducing fossil‐based carbon dioxide emissions. Based on this trend, biomass for energy is expected to be used in the EU mainly for heating until the end of the decade. The perennial herbaceous mallow plant Sida hermaphrodita (L.) Rusby (‘Sida’) has high potential as an alternative biomass plant for energy purposes. Different density cultivation scenarios of Sida accounting for 1, 2, or 4 plants per m² resulted in a total biomass yield of 21, 28, and 34 tons dry matter/ha, respectively, over a 3‐year period under agricultural conditions while the overall investment costs almost doubled from 2 to 4 plants per m². Subsequently, Sida biomass was used as SI) chips, SII) pellets, and SIII) briquettes for combustion studies at pilot plant scale. Pellets outcompeted chips and briquettes by showing low CO emission of 40 mg/Nm³, good burnout, and low slagging behavior, however, with elevated NO_x and SO₂ levels. In contrast, combustion of chips and briquettes displayed high CO emissions of >1,300 mg/Nm³, while SO₂ values were below 100 mg/Nm³. Contents of HCl in the flue gas ranged between 32 and 52 mg/Nm³ for all Sida fuels tested. High contents of alkaline earth metals such as CaO resulted in high ash melting points of up to 1,450°C. Life cycle assessment results showed the lowest ecological impact for Sida pellets taking all production parameters and environmental categories into consideration, showing further advantages of Sida over other alternative biomasses. Overall, the results indicate the improved applicability of pelletized Sida biomass as a renewable biogenic energy carrier for combustion.     

Influence of p-cresol on the proteome of the autotrophic nitrifying bacterium Nitrosomonas eutropha C91

In this study, the effect of the organic micropollutant and known inhibitor of nitrification, p-cresol, was investigated on the metabolism of the ammonia oxidizing bacteria (AOB) Nitrosomonas eutropha C91 using MS-based quantitative proteomics. Several studies have demonstrated that AOB are capable of biotransforming a wide variety of aromatic compounds making them suitable candidates for bioremediation, yet the underlying molecular mechanisms are poorly described. The effect of two different concentrations of the aromatic micropollutant p-cresol (1 and 10 mg L^?1) on the metabolism of N. eutropha C91, relative to a p-cresol absent control, was investigated. Though the rate of nitrification in N. eutropha C91 appeared essentially unaffected at both concentrations of p-cresol relative to the control, the expressional pattern of the proteins of N. eutropha C91 changed significantly. The presence of p-cresol resulted in the repressed expression of several key proteins related to N-metabolism, seemingly impairing energy production in N. eutropha C91, contradicting the observed unaltered rates of nitrification. However, the expression of proteins of the TCA cycle and proteins related to xenobiotic degradation, including a p-cresol dehydrogenase, was found to be stimulated by the presence of p-cresol. This indicates that N. eutropha C91 is capable of degrading p-cresol and that it assimilates degradation intermediates into the TCA cycle. The results reveal a pathway for p-cresol degradation and subsequent entry point in the TCA cycle in N. eutropha C91. The obtained data indicate that mixotrophy, rather than cometabolism, is the major mechanism behind p-cresol degradation in N. eutropha C91.     

Composition and abundance of phytoplankton in the Baidarata Inlet of the Kara Sea in summer and autumn

The species composition and abundance of phytoplankton were determined in the Baidarata Inlet (Kara Sea) in August 2005 and July and September–October 2007. A total number of 220 species were found. In the surface layer, phytoplankton biomass ranged from 1.5 to 15.4 mg C/m³ (mean 5.7 ± 3.0 mg C/m³) in July, from 1.2 to 11.8 mg C/m3 (mean 5.2 ± 2.8 mg C/m³) in August, and from 4.4 to 22.6 mg C/m³ (mean 12.8 ± 5.6 mg C/m³) in September-October. In July at different sampling sites, the biomass was dominated by dinoflagellates, diatoms, and chrysophycean. Dinoflagellates dominated at almost all stations in August. Diatoms dominated in autumn with the most abundant species Paralia sulcata.     

Physiological responses of carbon-sequestering microalgae to elevated carbon regimes

In order to identify a high carbon-sequestering microalgal strain, the physiological effect of different concentrations of carbon sources on microalgae growth was investigated. Five indigenous strains (I-1, I-2, I-3, I-4 and I-5) and a reference strain (I-0: Coccolithus pelagicus 913/3) were subjected to CO₂ concentrations of 0.03–15% and NaHCO₃ of 0.05–2 g CO₂ l^–1. The logistic model was applied for data fitting, as well as for estimation of the maximum growth rate (μ_max) and the biomass carrying capacity (B_max). Amongst the five indigenous strains, I-3 was similar to the reference strain with regards to biomass production values. The B_max of I-3 significantly increased from 214 to 828 mg l^–1 when CO₂ concentration was increased from 0.03 to 15% (r = 0.955, P = 0.012). Additionally, the B_max of I-3 increased with increasing NaHCO₃ (r = 0.885, P = 0.046) and was recorded at 153 mg l^–1 (at 0.05 g CO₂ l^–1) and 774 mg l^–1 at (2 g CO₂ l^–1). Relative electron transport rate (rETR) and maximum quantum yield (F_v/F_m) were also applied to assess the impact of elevated carbon sources on the microalgal cells at the physiological level. Isolate I-3 displayed the highest rETR confirming its tolerance to higher quantities of carbon. Additionally, the decline in F_v/F_m with increasing carbon was similar for strains I-3 and the reference strain. Based on partial 28s ribosomal RNA gene sequencing, strain I-3 was homologous to the ribosomal genes of Chlorella sp.     

三种暖季型草坪草对二氧化硫抗性的比较

二氧化硫(SO_2)是城市大气污染的重要污染物之一,这已经越来越成为国家迫在眉睫须彻底解决的环境问题,解决SO_2污染问题仍是一个重要的生态与环保课题。草坪植物现已成为城市绿化的主要造景材料,依据植物对大气污染的反应特性来选择城市草坪草种,使之在发挥景观效果的同时,发挥其更好的生态效果。采用人工模拟熏气法,以CK(自然状态)、S1(4.29mg/m~3)、S2(6.44mg/m~3)、S3(8.58mg/m~3)、S4(10.73mg/m~3)5个SO_2浓度水平,对城市常用的3种暖季型草坪草:结缕草(Zoysiajaponica)、百喜草(Paspalum notatum)、狗牙根(Cynodon dactylon)进行SO_2胁迫处理,并测定3种草坪草生理生化指标,最终比较3种草坪草对SO_2的抗性。结果表明:随SO_2浓度增加,3种草坪草的可溶性糖含量(SS)、脯氨酸含量(Pro)、丙二醛(MDA)含量呈增加趋势;结缕草可溶性蛋白(SP)呈先降后升趋势,百喜草则呈先升后降趋势,狗牙根各胁迫处理下其SP含量均低于CK;结缕草和狗牙根过氧化物酶(POD)、过氧化氢酶(CAT)和超氧化物歧化酶(SOD)活性呈增加趋势,百喜草SOD和CAT活性呈先升后降趋势,同时其POD活性在各SO_2胁迫处理下均低于CK。将所有测定指标采用模糊数学隶属度公式进行综合相关分析,得出3种草坪草对SO_2的抗性由强到弱的排序为:结缕草狗牙根百喜草。结缕草在SO_2胁迫下与其它两种草坪草相比,表现出了更好的抗性能力,因此,在城市空气不断遭受污染的今天,结缕草可以作为热带和亚热带城市绿化草坪植物的优选草种之一。