The Tc3 Family of Transposable Genetic Elements in Caenorhabditis Elegans

We describe genetic and molecular properties of Tc3, a family of transposable elements in Caenorhabditis elegans. About 15 Tc3 elements are present in the genomes of several different wild-type varieties of C. elegans, but Tc3 transposition and excision are not detected in these strains. Tc3 transposition and excision occur at high frequencies, however, in strain TR679, a mutant identified because of its highly active Tc1 elements. In TR679, Tc3 is responsible for several spontaneous mutations affecting the unc-22 gene. Tc3-induced mutations are unstable, and revertants result from precise or nearly precise excision of Tc3. Although Tc3 is very active in TR679, it is not detectably active in several other mutator mutants, all of which exhibit high levels of Tc1 activity. Tc3 is 2.5 kilobases long, and except for sequences near its inverted repeat termini, it is unrelated to Tc1. The termini of Tc3 are inverted repeats of at least 70 base pairs; the terminal 8 nucleotides of Tc3 are identical to 8 of the terminal 9 nucleotides of Tc1.     

Precise and imprecise somatic excision of the transposon Tc1 in the nematode C. elegans.

Eleven chromosomal products of somatic excision of Tc1 transposable elements have been cloned and sequenced. The cloning method did not involve genetic reversion; therefore the products analyzed should be representative. Six empty religated target sites were from excision of one Tc1 element inserted near actin genes on linkage group V; five were from a second Tc1 element inserted elsewhere on the same linkage group. All six products from the first element were identical in sequence to an empty target site from a second strain, indicating excision had been precise. Two of the products from the second element were also precise, whereas the other three contained four extra nucleotides at the point of excision, indicating an imprecise excision. The four nucleotides are the same in all cases and could represent two terminal nucleotides of the transposon plus a two-nucleotide target site duplication. The difference in the ratio of precise to imprecise excision at the two insertion sites suggests a possible chromosomal position effect on the pathway of Tc1 somatic excision.     

The origin of footprints of the Tc1 transposon of Caenorhabditis elegans.

Mutations caused by the Tc1 transposon in Caenorhabditis elegans can revert by loss of the element. Usually the transposon leaves behind a 'footprint'--a few nucleotides of one or both ends of the transposon. Two possible explanations for the footprints are: (i) imprecise excision or (ii) interrupted repair. Here I report that in a diploid animal having a homozygous Tc1 insertion the reversion frequency is approximately 10(-4), and a Tc1 footprint is found; however when the corresponding sequence on the homologous chromosome is wild-type, the reversion frequency is 100 times higher, and the reverted sequence is precise. Apparently the footprint results from incomplete gene conversion from the homologous chromosome, and not from imprecise excision of Tc1. These results support the following model: Tc1 excision leaves a double-strand DNA break, which can be repaired using the homologous chromosome or sister chromatid as a template. In heterozygotes repair can lead to reversion; in homozygotes Tc1 is copied into the 'empty' site, and only rare interrupted repair leads to reversion, hence the 100-fold lower reversion rate and the footprint.     

Patterns of selection against transposons inferred from the distribution of Tc1, Tc3 and Tc5 insertions in the mut-7 line of the nematode Caenorhabditis elegans

To identify the factors (selective or mutational) that affect the distribution of transposable elements (TEs) within a genome, it is necessary to compare the pattern of newly arising element insertions to the pattern of element insertions that have been fixed in a population. To do this, we analyzed the distribution of recent mutant insertions of the Tc1, Tc3, and Tc5 elements in a mut-7 background of the nematode Caenorhabditis elegans and compared it to the distribution of element insertions (presumably fixed) within the sequenced genome. Tc1 elements preferentially insert in regions with high recombination rates, whereas Tc3 and Tc5 do not. Although Tc1 and Tc3 both insert in TA dinucleotides, there is no clear relationship between the frequency of insertions and the TA dinucleotide density. There is a strong selection against TE insertions within coding regions: the probability that a TE will be fixed is at least 31 times lower in coding regions than in noncoding regions. Contrary to the prediction of theoretical models, we found that the selective pressure against TE insertions does not increase with the recombination rate. These findings indicate that the distribution of these three transposon families in the genome of C. elegans is determined essentially by just two factors: the pattern of insertions, which is a characteristic of each family, and the selection against insertions within coding regions.     

Evidence for a transposon in caenorhabditis elegans

The C. elegans genome contains a 1.7 kb repeated DNA sequence (Tc1) that is present in different numbers in various strains. In strain Bristol and 10 other strains analyzed, there are 20 ± 5 copies of Tc1, and these are located at a nearly constant set of sites in the DNA. In Bergerac, however, there are 200 ± 50 interspersed copies of Tc1 that have arisen by insertion of Tc1 elements into new genomic sites. The interspersed copies of Tc1 have a conserved, nonpermuted structure. The structure of genomic Tc1 elements was analyzed by the cloning of a single Tc1 element from Bergerac and the comparison of its structure with homologous genomic sequences in Bristol and Bergerac. Tc1 elements at three sites analyzed in Bergerac undergo apparently precise excision from their points of insertion at high frequency.     

In vitro transposition of ISY100, a bacterial insertion sequence belonging to the Tc1/mariner family

The Synechocystis sp. PCC6803 insertion sequence ISY100 (ISTcSa) belongs to the Tc1/mariner/IS630 family of transposable elements. ISY100 transposase was purified and shown to promote transposition in vitro. Transposase binds specifically to ISY100 terminal inverted repeat sequences via an N-terminal DNA-binding domain containing two helix-turn-helix motifs. Transposase is the only protein required for excision and integration of ISY100. Transposase made double-strand breaks on a supercoiled DNA molecule containing a mini-ISY100 transposon, cleaving exactly at the transposon 3' ends and two nucleotides inside the 5' ends. Cleavage of short linear substrates containing a single transposon end was less precise. Transposase also catalysed strand transfer, covalently joining the transposon 3' end to the target DNA. When a donor plasmid carrying a mini-ISY100 was incubated with a target plasmid and transposase, the most common products were insertions of one transposon end into the target DNA, but insertions of both ends at a single target site could be recovered after transformation into Escherichia coli. Insertions were almost exclusively into TA dinucleotides, and the target TA was duplicated on insertion. Our results demonstrate that there are no fundamental differences between the transposition mechanisms of IS630 family elements in bacteria and Tc1/mariner elements in higher eukaryotes.     

Analysis of a Mutator Activity Necessary for Germline Transposition and Excision of Tc1 Transposable Elements in Caenorhabditis Elegans

The Tc1 transposable element family of the nematode Caenorhabditis elegans consists primarily of 1.6-kb size elements. This uniformity of size is in contrast to P in Drosophila and Ac/Ds in maize. Germline transposition and excision of Tc1 are detectable in the Bergerac (BO) strain, but not in the commonly used Bristol (N2) strain. A previous study suggested that multiple genetic components are responsible for the germline Tc1 activity of the BO strain. To analyze further this mutator activity, we derived hybrid strains between the BO strain and the N2 strain. One of the hybrid strains exhibits a single locus of mutator activity, designated mut-4, which maps to LGI. Two additional mutators, mut-5 II and mut-6 IV, arose spontaneously in mut-4 harboring strains. This spontaneous appearance of mutator activity at new sites suggests that the mutator itself transposes. The single mutator-harboring strains with low Tc1 copy number generated in this study should be useful in investigations of the molecular basis of mutator activity. As a first step toward this goal, we examined the Tc1 elements in these low copy number strains for elements consistently co-segregating with mutator activity. Three possible candidates were identified: none was larger than 1.6 kb.     

Shotgun cloning of transposon insertions in the genome of Caenorhabditis elegans

We present a strategy to identify and map large numbers of transposon insertions in the genome of Caenorhabditis elegans. Our approach makes use of the mutator strain mut-7, which has germline-transposition activity of the Tc1/mariner family of transposons, a display protocol to detect new transposon insertions, and the availability of the genomic sequence of C. elegans. From a pilot insertional mutagenesis screen, we have obtained 351 new Tc1 transposons inserted in or near 219 predicted C. elegans genes. The strategy presented provides an approach to isolate insertions of natural transposable elements in many C. elegans genes and to create a large-scale collection of C. elegans mutants.     

Mobilization of quiet, endogenous Tc3 transposons of Caenorhabditis elegans by forced expression of Tc3 transposase.

The commonly studied Caenorhabditis elegans strain Bristol N2 contains approximately 15 copies per genome of the transposon Tc3. However, Tc3 is not active in Bristol N2. Tc3 contains one major open reading frame (Tc3A). We have fused this open reading frame to an inducible promoter and expressed it in a transgenic Bristol N2 line. Tc3A expression resulted in frequent excision and transposition of endogenous Tc3 elements. This shows that the Bristol N2 genome contains Tc3 transposons that are cis proficient for transposition, but are immobile because Tc3A is absent. We demonstrate that recombinant Tc3A binds specifically to the terminal nucleotides of the Tc3 inverted repeat, indicating that Tc3A is the Tc3 transposase. Activation of Tc3 transposition in vivo was accompanied by the appearance of extrachromosomal, linear copies of Tc3. These may be intermediates in Tc3 transposition.     

Continuous exchange of sequence information between dispersed Tc1 transposons in the Caenorhabditis elegans genome

In a genome-wide analysis of the active transposons in Caenorhabditis elegans we determined the localization and sequence of all copies of each of the six active transposon families. Most copies of the most active transposons, Tc1 and Tc3, are intact but individually have a unique sequence, because of unique patterns of single-nucleotide polymorphisms. The sequence of each of the 32 Tc1 elements is invariant in the C. elegans strain N2, which has no germline transposition. However, at the same 32 Tc1 loci in strains with germline transposition, Tc1 elements can acquire the sequence of Tc1 elements elsewhere in the N2 genome or a chimeric sequence derived from two dispersed Tc1 elements. We hypothesize that during double-strand-break repair after Tc1 excision, the template for repair can switch from the Tc1 element on the sister chromatid or homologous chromosome to a Tc1 copy elsewhere in the genome. Thus, the population of active transposable elements in C. elegans is highly dynamic because of a continuous exchange of sequence information between individual copies, potentially allowing a higher evolution rate than that found in endogenous genes.     

Three Tn10-associated excision events: relationship to transposition and role of direct and inverted repeats

We describe three related DNA alterations associated with transposon Tn10: precise excision of Tn10, nearly precise excision of Tn10 and precise excision of the nearly precise excision remnant. DNA sequence analysis shows that each of these alterations results in excision of all or part of the Tn10 element, and each involves specific repeat sequences at or near the ends of the element. Furthermore, all three events are structurally analogous: in each case, excision occurs between two short direct-repeat sequences, with resulting deletion of all intervening material plus one copy of the direct repeat; and in all three cases, the direct repeats involved occur at either end of an inverted repeat. Analysis of mutant Tn10 elements and characterization of bacterial host mutations suggest that all three types of excision events occur by pathways that are fundamentally distinct from the pathway(s) for Tn10-promoted transposition and other DNA rearrangements (deletions and inversions) actively promoted by the element. In addition, precise excision and nearly precise excision appear to occur by very closely related or identical pathways; and several lines of evidence suggest that the 1400 bp inverted repeats at the ends of Tn10 may play a structural role in both of these events. The third excision event appears to occur by yet another pathway.     

Targeted alterations of the Caenorhabditis elegans genome by transgene instructed DNA double strand break repair following Tc1 excision.

Excision of a Tc1 transposon of Caenorhabditis elegans is thought to leave a DNA double strand break. We report here that sequence polymorphisms in a transgenic DNA template are copied into the corresponding chromosomal gene upon excision of Tc1 from the chromosome. This shows that the double strand DNA break resulting from Tc1 excision is repaired with the extrachromosomal DNA as template and that sequences flanking the break can be replaced by sequences from the transgene. Transgene instructed break repair provides a method for the targeted introduction of precise alterations into the Caenorhabditis elegans genome.     

Mut-7 of C. elegans, required for transposon silencing and RNA interference, is a homolog of Werner syndrome helicase and RNaseD.

While all known natural isolates of C. elegans contain multiple copies of the Tc1 transposon, which are active in the soma, Tc1 transposition is fully silenced in the germline of many strains. We mutagenized one such silenced strain and isolated mutants in which Tc1 had been activated in the germline ("mutators"). Interestingly, many other transposons of unrelated sequence had also become active. Most of these mutants are resistant to RNA interference (RNAi). We found one of the mutated genes, mut-7, to encode a protein with homology to RNaseD. This provides support for the notion that RNAi works by dsRNA-directed, enzymatic RNA degradation. We propose a model in which MUT-7, guided by transposon-derived dsRNA, represses transposition by degrading transposon-specific messengers, thus preventing transposase production and transposition.     

The Tc2 transposon of Caenorhabditis elegans has the structure of a self-regulated element.

We have analyzed the sequence of the Tc2 transposon of the nematode Caenorhabditis elegans. The Tc2 element is 2,074 bp in length and has perfect inverted terminal repeats of 24 bp. The structure of this element suggests that it may have the capacity to code for a transposase protein and/or for regulatory functions. Three large reading frames on one strand exhibit nonrandom codon usage and may represent exons. The first open coding region is preceded by a potential CAAT box, TATA box, and consensus heat shock sequence. In addition to its inverted terminal repeats, Tc2 has an unusual structural feature: subterminal degenerate direct repeats that are arranged in an irregular overlapping pattern. We have also examined the insertion sites of two Tc2 elements previously identified as the cause of restriction fragment length polymorphisms. Both insertions generated a target site duplication of 2 bp. One element had inserted inside the inverted terminal repeat of another transposon, splitting it into two unequal parts.     

Imprecise excision of the Caenorhabditis elegans transposon Tc1 creates functional 5' splice sites.

Imprecise excision of the Caenorhabditis elegans transposon Tc1 from a specific site of insertion within the unc-54 myosin heavy chain gene generates either wild-type or partial phenotypic revertants. Wild-type revertants and one class of partial revertants contain insertions of four nucleotides in the unc-54 third exon (Tc1 "footprints"). Such revertants express large amounts of functional unc-54 myosin despite having what would appear to be frameshifting insertions in the unc-54 third exon. We demonstrate that these Tc1 footprints act as efficient 5' splice sites for removal of the unc-54 third intron. Splicing of these new 5' splice sites to the normal third intron splice acceptor removes the Tc1 footprint from the mature mRNA and restores the normal translational reading frame. Partial revertant unc-54(r661), which contains a single nucleotide substitution relative to the wild-type gene, is spliced similarly, except that the use of its new 5' splice site creates a frameshift in the mature mRNA rather than removing one. In all of these revertants, two alternative 5' splice sites are available to remove intron 3. We determined the relative efficiency with which each alternative 5' splice site is used by stabilizing frameshifted mRNAs with smg(-) genetic backgrounds. In all cases, the upstream member of the two alternative sites is used preferentially (> 75% utilization). This may reflect an inherent preference of the splicing machinery for the upstream member of two closely spaced 5' splice sites. Creation of new 5' splice sites may be a general characteristic of Tc1 insertion and excision events.     

New mechanism of BRCA-1 mutation by deletion/insertion at the same nucleotide position in three unrelated French breast/ovarian cancer families

A novel complex mutation consisting of a small deletion/insertion (3958del5ins4) was found in the breast cancer-1 gene (BRCA-1) in three unrelated French breast and/or ovarian cancer families. These mutations occurred at the same nucleotide position of the 3′ end of exon 11. The wild-type sequence, CTCAG, was deleted and replaced by AGGC in the three families. The consequence is the generation of a stop codon, TAG, resulting in a truncated protein. We propose two different mechanisms to explain the generation of this complex mutation: (i) the simultaneous occurrence of a deletion and an insertion in a stem-loop structure and (ii) the abortive integration of a human transposable element (Tigger 1) that deleted 5 nucleotides and inserted a 4-nucleotide “scar”, corresponding to the 5′ extremity of the transposon. Received: 26 November 1997 / Accepted: 6 February 1998     

A genome-wide screen identifies 27 genes involved in transposon silencing in C. elegans

Transposon jumps are a major cause of genome instability. In the C. elegans strain Bristol N2, transposons are active in somatic cells, but they are silenced in the germline, presumably to protect the germline from mutations. Interestingly, the transposon-silencing mechanism shares factors with the RNAi machinery. To better understand the mechanism of transposon silencing, we performed a genome-wide RNAi screen for genes that, when silenced, cause transposition of Tc1 in the C. elegans germline. We identified 27 such genes, among which are mut-16, a mutator that was previously found but not identified at the molecular level, ppw-2, a member of the argonaute family, and several factors that indicate a role for chromatin structure in the regulation of transposition. Some of the newly identified genes are also required for cosuppression and therefore represent the shared components of the two pathways. Since most of the newly identified genes have clear homologs in other species, and since transposons are found from protozoa to human, it seems likely that they also protect other genomes against transposon activity in the germline.     

Target site choice of the related transposable elements Tc1 and Tc3 of Caenorhabditis elegans.

We have investigated the target choice of the related transposable elements Tc1 and Tc3 of the nematode C. elegans. The exact locations of 204 independent Tc1 insertions and 166 Tc3 insertions in an 1 kbp region of the genome were determined. There was no phenotypic selection for the insertions. All insertions were into the sequence TA. Both elements have a strong preference for certain positions in the 1 kbp region. Hot sites for integration are not clustered or regularly spaced. The orientation of the integrated transposon has no effect on the distribution pattern. We tested several explanations for the target site preference. If simple structural features of the DNA (e.g. bends) would mark hot sites, we would expect the patterns of the two related transposons Tc1 and Tc3 to be similar; however we found them to be completely different. Furthermore we found that the sequence at the donor site has no effect on the choice of the new insertion site, because the insertion pattern of a transposon that jumps from a transgenic donor site is identical to the insertion pattern of transposons jumping from endogenous genomic donor sites. The most likely explanation for the target choice is therefore that the primary sequence of the target site is recognized by the transposase. However, alignment of the Tc1 and Tc3 integration sites does not reveal a strong consensus sequence for either transposon.