Flow system fluorescence polarization measurements on fluorescein diacetate-stained EL4 cells.

We have adapted a multiparameter cell sorter to measure the distribution of fluorescence polarization in cell populations. Measurements carried out on EL4 cells show that the percent polarization of fluorescein fluorescence decreases with increasing fluorescence intensity. This inverse relationship between polarization and intensity is shown both within the cell population and by the average values of the two quantities during both the increase and decrease of fluorescence intensity. The quantitative relation between intensity and polarization is different in hypertonic than in isotonic media. These results suggest that polarization measurements carried out at a fixed time after incubation of cells with fluorescein diacetate, which is converted to fluorescein within the cells, may depend in part on the rate of fluorescein accumulation, and that agents that have been reported to change the polarization of fluorescein in living cells may do so by changing the kinetics of fluorescein accumulation.     

Growth and productivity impacts of periplasmic nuclease expression in an Escherichia coli Fab' fragment production strain

Host cell engineering is becoming a realistic option in whole bioprocess strategies to maximize product manufacturability. High molecular weight (MW) genomic DNA currently hinders bioprocessing of Escherichia coli by causing viscosity in homogenate feedstocks. We previously showed that co-expressing Staphylococcal nuclease and human Fab' fragment in the periplasm of E. coli enables auto-hydrolysis of genomic DNA upon cell disruption, with a consequent reduction in feedstock viscosity and improvement in clarification performance. Here we report the impact of periplasmic nuclease expression on stability of DNA and Fab' fragment in homogenates, host-strain growth kinetics, cell integrity at harvest and Fab' fragment productivity. Nuclease and Fab' plasmids were shown to exert comparable levels of growth burden on the host W3110 E. coli strain. Nuclease co-expression did not compromise either the growth performance or volumetric yield of the production strain. 0.5 g/L Fab' fragment (75 L scale) and 0.7 g/L (20 L scale) was achieved for both unmodified and cell-engineered production strains. Unexpectedly, nuclease-modified cells achieved maximum Fab' levels 8-10 h earlier than the original, unmodified production strain. Scale-down studies of homogenates showed that nuclease-mediated hydrolysis of high MW DNA progressed to completion within minutes of homogenization, even when homogenates were chilled on ice, with no loss of Fab' product and no need for additional co-factors or buffering.     

Quantitation of the binding, uptake, and degradation of fluoresceinylated neoglycoproteins by flow cytometry

The fluorescence properties of the fluorescein residues bound to a protein are used to analyze by flow cytometry the neoglycoproteins' endocytosis mediated by membrane lectins of Lewis lung carcinoma cells (3LL cells). The quantum yield of fluorescein bound to a protein is dependent on the number of fluorophore molecules bound to a protein molecule and the pH of the environmental medium. The mean fluorescence intensity of a fluorescein molecule bound to a protein decreases when the number of fluorescein residues per protein molecule increases. However, after proteolytic digestion, the mean fluorescence intensity of a fluorescein molecule is constant and equal to that of free fluorescein. The binding of fluorescein-labeled alpha-glucosylated serum albumin to 3LL cells at 4 degrees C can easily be determined by flow cytometry because under these conditions the environmental pH is neutral, and the neoglycoprotein is not degraded. When the cells are incubated at 37 degrees C in the presence of a fluorescein-labeled neoglycoprotein, the fluorescence intensity of a cell is low because of the low pH of endosomes and lysosomes but is increased upon a postincubation at 4 degrees C in the presence of monensin, a proton/sodium ionophore. The extent of the proteolytic digestion of an endocytosed neoglycoprotein can be assessed by comparing, upon a monensin postincubation at 4 degrees C, the high cell-associated fluorescence of cells incubated in the absence of leupeptin (an inhibitor of lysosomal proteases) and the relatively low fluorescence intensity of cells incubated in the presence of leupeptin.     

High Throughput Screening with Multiphoton Excitation

Fluorescence detection is extensively used in high throughput screening. In HTS there is a continuous migration toward higher density plates and smaller sample volumes. In the present report we describe the advantages of two-photon or multiphoton excitation for HTS. Multiphoton excitation (MPE) is the simultaneous absorption of two long-wavelength photons to excite the lowest singlet state of the fluorophore. MPE is typically accomplished with short but high-intensity laser pulses, which allows simultaneous absorption of two or more photons. The intensity of the multiphoton-induced fluorescence is proportional to the square, cube, or higher power of the instantneous photon flux. Consequently, two-photon or multiphoton excitation only occurs at the focal point of the incident beam. This property of two-photon excitation allows the excited volume to be very small and to be localized in the center of each well in the HTS plate. We show that two-photon-induced fluorescence of fluorescein can be reliably measured in microwell plates. We also show the use of 6-carboxy fluorescein as a pH probe with two-photon excitation, and measure 4'-6-diamidino-2-phenylindole (DAPI) binding and two-photon-induced fluorescence. In further studies we measure the time-dependent intensity decays of DAPI bound to DNA and of calcium-dependent fluorophores. Finally, we demonstrate the possibility of three-photon excitation of several fluorophores, including indole, in the HTS plate. These results suggest that MPE can be used in high-density multiwell plates.     

Force probe measurements of antibody-antigen interactions

The surface force apparatus has been used to quantify directly the forces that govern the interactions between proteins and ligands. In this work, we describe the measured interactions between the antigen fluorescein and the Fab' fragment of the monoclonal 4-4-20 anti-fluorescyl IgG antibody. Here we first describe the use of the surface force apparatus to demonstrate directly the impact of the charge composition in the region of the antibody binding site on the antibody interactions. Several approaches are described for immobilizing antigens, antibodies, and proteins in general for direct force measurements. The measured force profiles presented are accompanied by an extensive discussion of protocols used to analyze the force-distance curves and to interpret them in terms of the antibody structure. In addition to long-range electrostatic forces, we also consider short-range forces that can affect the strength of adhesion between the Fab' and immobilized fluorescein. The latter investigations demonstrate the influence of interfacial properties on the recognition of surface-bound antigens.     

Assessment of the acrosomal status of membrane-intact ram spermatozoa after freezing and thawing,by simultaneous lectin/Hoechst 33258 staining

We have evaluated the effect of freezing and thawing on the acrosomal status of ram spermatozoa, especially those that withstood cryopreservation as assessed by membrane integrity. To this end, we performed simultaneous lectin/Hoechst 33258 staining, and compared the ability of three fluoresceinated lectins.Ram spermatozoa were treated with fluorescein isothiocyanate-labelled Pisum sativum lectin (PSA), fluorescein isothiocyanate-labelled Arachis hypogea lectin (PNA) and fluorescein isothiocyanate-labelled Triticum vulgaris lectin (WGA) and simultaneously with Hoechst 33258 for determination of membrane integrity and acrosomal status.In all cases, three forms were readily distinguished by their distribution pattern. For both PSA and PNA, the most abundant form found in fresh semen consisted of fluorescence on the acrosomal area. This form corresponds to acrosome-intact spermatozoa, as assessed by Differential Interference Contrast (DIC) microscopy. Two minor forms showed weak fluorescence on the equatorial segment or no fluorescence on the head. DIC microscopy revealed that both forms were associated with acrosome-lost spermatozoa. WGA labelling showed two forms, one of which consisted of fluorescence on the entire head, albeit more intensely on its anterior segment. Spermatozoa in this form were acrosome-intact by DIC. The other form lacked fluorescence on the acrosomal region, but still showed faint fluorescence in the posterior region. This form was acrosome-lost by DIC.Incubation of fresh spermatozoa with calcium ionophore A23187 for up to 1 h significantly increased the percentage of those forms identified as acrosome-reacted as described above. This was confirmed by the time-dependent accumulation of these forms, as well as by DIC microscopy. At all times, differences among values obtained using these three lectins were not significant.Freezing and thawing led to a decrease of both membrane integrity and acrosomal integrity, irrespective of the lectin used. However, almost all spermatozoa that withstood cryopreservation, as evaluated by Hoechst exclusion, showed intact acrosomes. In this case, no differences between fresh and frozen/thawed samples were observed.These results suggest that the structural integrity of ram spermatozoa is mostly unaffected after cryopreservation, suggesting that it is damage to the plasma membrane that is primarily responsible for the low fertility of cryopreserved samples.     

Fluorescence properties of free and protein bound fluorescein dyes. I. Macrospectrofluorometric measurements.

Excitation and emission properties of fluorescein derivatives were studied macrofluorometrically. Measurements were performed with solutions of various concentrations (0.07-100 microgram/ml) of free sodium fluorescein prepared from fluorescein diacetate (FDA), fluorescein isothiocyanate (FITC) and FITC bound to rabbit gamma-globulin. Both excitation and emission spectra as well as fluorescence intensities at constant excitation/emission wavelengths (496/515 nm) were recorded. The findings indicate that (1) FDA gives about twice the fluorescence intensity compared to equal concentrations of FITC. (2) The fluorescence properties of FITC upon excitation with blue light (lambda = 496 nm) are only slightly altered by the conjugation to rabbit gamma-globulin. (3) Considerable quenching due to conjugation could, however, be shown to occur upon UV excitation (lambda = 340 nm). (4) Fluorescence emission excited by visible blue light (496 nm) increases linearly to dye concentration in a range of 0.07-2.5 microgram/ml. Beginning at 5 microgram/ml (10-(5) M/1) all three compounds show a sharp decrease of fluorescence intensity with further increasing concentration. Practical aspects of these data for the immunofluorescence method are discussed.     

Reagentless and regenerable immunosensor for monitoring of immunoglobulin G based on non-separation immunoassay

Based on the enhancement of fluorescein isothiocyanate (FITC) fluorescence caused by reactions between proteins, we developed a reagentless, regenerable and rapid immunosensing system to determine immunoglobulin G (IgG). Fluorescence intensity of the immobilized FITC depends on IgG concentration, ranging from 10 to 50 microg/ml, specifically, even with co-existing proteins. The response time is 30 min during steady-state measurement and is less than a minute during transient measurement. When the FITC-labeled protein A binds to IgG, the surrounding atmosphere of FITC becomes hydrophobic. Since the fluorescence intensity of fluorescent substances generally increases at a hydrophobic environment, FITC fluorescence intensity increases with the concentration of protein A bonding to IgG. This system is regenerable because the fluorescence enhancement repeatedly occurs every time the immobilized fluorescent reagent is immersed in sample solutions.     

Quantitative comparison of anti-fading mounting media for confocal laser scanning microscopy.

Fading is one of the major obstacles to reliable observation in fluorescence microscopy. Using a confocal laser scanning microscope (CLSM) coupled to a computer, we quantitatively measured fading of fluorescence to formulate an equation, evaluated the anti-fading ability of several anti-fading media, and restored the faded images to the original level according to this equation. NIH 3T3 cells were stained with fluorescein isothiocyanate (FITC)-phalloidin, mounted with several commercial and homemade anti-fade media, and observed with CLSM under repeated illumination. With any mounting medium, attenuation of fluorescence intensity at a certain pixel occurred stepwise and the decrease was proportional to the intensity of the previous scan. From these results, we formulated an equation that has three coefficients: anti-fading factor (A), indicating the ability to retard fading; fluorescent intensity at the first scan (EM(1)); and background fluorescence (B). The fluorescent intensity at a certain point following nth scan is given as EM(n) = EM(1) * A ((n-1)). This equation was available for restoring faded images to their original states, even after the image had faded to only 60% of its original intensity.     

High throughput assay to detect compounds that enhance the proton permeability of Candida albicans membranes.

We describe a 96-well microtiter plate format assay to detect changes in proton permeability in membranes of the pathogenic yeast, Candida albicans. Candida albicans cells were incubated with the lipophilic ester of 2',7'-bis-(2-carboxyethyl)-5-(and-6)-carboxyfluorescein (BCECF), a pH-sensitive fluorescein derivative. Inside the cells, BCECF was released and trapped in the vacuole. Compounds that destroyed membrane integrity increased the pH value of the vacuole due to proton leakage into the cytoplasm. This was paralleled by an increase in BCECF fluorescence intensity, which could be quantified. The test assay was validated with amphotericin B, as well as with other membrane-active compounds known to increase membrane permeability. Possible applications and limitations of this assay in the field of antifungal drug discovery are discussed.     

Use of fluorescein diacetate for research on macrophage activation

Kinetic of changes in the fluorescence intensity of macrophages in a medium containing fluorescein diacetate (FDA) has been analysed. It is shown that under certain conditions the intensity of macrophages retains a constant level for rather a long time. The addition of stimulants such as lipopolysaccharide or tuftsin to the incubation medium leads to characteristic changes in the cell fluorescence level related to the increase in the activity of FDA intracellular hydrolyses and fluorescein efflux from macrophages. It is concluded that the kinetic of changes in the macrophages fluorescence intensity in a medium with FDA may serves as a test for detecting early functional changes upon macrophage activation.     

Fluorescence spectral properties of labeled thiolated oligonucleotides bound to silver particles

We examined the fluorescent spectral properties of fluorescein-labeled DNA oligomers when directly bound to metallic silver particles via a terminal sulfhydryl group. We found a 12-fold increase in fluorescence intensity and 25-fold decrease in lifetime for a fluorescein residue positioned 23 nucleotides from the silver surface compared to labeled oligomers in free solution. Similar results were found for a 23-mer labeled with five fluorescein residues. The absence of long lifetime components in the intensity decays suggests that all labeled oligomers are bound to silver and affected similarly by the metallic surfaces. These results provide the basic knowledge needed to begin use of metal-enhanced fluorescence for the detection of target sequences in simple formats potentially without a washing separation step. The use of metal-enhanced fluorescence provides a generic approach to obtaining a hybridization-dependent increase in fluorescence with most, if not all, commonly used fluorophores.     

Quantitative imaging and statistical analysis of fluorescence in situ hybridization (FISH) of Aureobasidium pullulans

Image and multifactorial statistical analyses were used to evaluate the intensity of fluorescence signal from cells of three strains of A. pullulans and one strain of Rhodosporidium toruloides, as an outgroup, hybridized with either a universal or an A. pullulans 18S rRNA oligonucleotide probe in direct or indirect FISH reactions. In general, type of fixation (paraformaldehyde or methanol-acetic acid) had no apparent effect on cell integrity and minimal impact on fluorescence. Permeabilization by enzyme treatment for various times, though needed to admit high Mw detection reagents (avidin-FITC) in indirect FISH, tended to nonspecifically degrade cells and lower the signal. Digestion was unnecessary and undesirable for the directly labelled probes. Multilabelled (five fluorescein molecules) probes enhanced fluorescence about fourfold over unilabelled probes. Overall, direct FISH was preferable to indirect FISH and is recommended especially for studies of microbes on natural substrata.     

Use of a three-color cDNA microarray platform to measure and control support-bound probe for improved data quality and reproducibility

Construction methodologies for cDNA microarrays lack the ability to determine array integrity prior to hybridization, leaving the array itself a source of uncontrolled experimental variation. We solved this problem through development of a three-color cDNA array platform whereby printed probes are tagged with fluorescein and are compatible with Cy3 and Cy5 target labeling dyes when using confocal laser scanners possessing narrow bandwidths. Here we use this approach to: (i) develop a tracking system to monitor the printing of probe plates at predicted coordinates; (ii) define the quantity of immobilized probe necessary for quality hybridized array data to establish pre-hybridization array selection criteria; (iii) investigate factors that influence probe availability for hybridization; and (iv) explore the feasibility of hybridized data filtering using element fluorescein intensity. A direct and significant relationship (R² = 0.73, P < 0.001) between pre-hybridization average fluorescein intensity and subsequent hybridized replicate consistency was observed, illustrating that data quality can be improved by selecting arrays that meet defined pre-hybridization criteria. Furthermore, we demonstrate that our three-color approach provides a means to filter spots possessing insufficient bound probe from hybridized data sets to further improve data quality. Collectively, this strategy will improve microarray data and increase its utility as a sensitive screening tool.     

Effect of covalent attachment of immunoglobulin fragments on liposomal integrity

Liposome stability during and after covalent coupling of Fab' antibody fragments was investigated. Large unilamellar vesicles containing entrapped 5(6)-carboxyfluorescein (CF) as a marker for liposomal integrity were prepared by extrusion through polycarbonate membranes. N-[4-(p-Maleimidophenyl)-butyryl]phosphatidylethanolamine (MPB-PE) was employed as a liposomal anchor for the covalent coupling of Fab' fragments. We observed that coupling of Fab' fragments to liposomes containing 5 mol % MPB-PE caused a concentration-dependent increase in size and polydispersity of the liposomes. Dependent on the concentration of the MPB-PE anchor in the membrane and the concentration of Fab' added, coupling was associated with the release of up to 95% of the entrapped CF. Rupture of the liposomes was identified as the primary mechanism of CF release during Fab' coupling. Reduction of the MPB-PE concentration to 1 mol % resulted in liposomes that were stable during and after Fab' coupling. The increased stability of these liposomes was due to the lower MPB-PE concentration and not to the lower number of attached Fab' fragments. By proper adjustment of the experimental conditions for coupling, the number of Fab' fragments attached to the 1 mol % MPB-PE liposomes could be increased without affecting the stability of the resulting liposomes. These stable liposomes, made by an extrusion method that avoids the use of organic solvents, detergents, or sonication, are therefore suitable for entrapment of labile compounds and can be used for immunotargeting or immunoassays.     

Staining of human metaphase chromosomes with fluorescent conjugates of polylysine

The interaction of polylysine and partially substituted dansyl, fluorescein, and quinacrine conjugates of polylysine with cytological preparations of human metaphase chromosomes has been studied by fluorescence microscopy. The fluorescence intensity along chromosomes stained with the dansyl and fluorescein conjugates exhibits little variation, suggesting that regions capable of binding these polycations are nearly evenly distributed. In contrast, the quinacrine derivatives of polylysine stain the chromosomes in a banded fluorescence pattern resembling that observed following quinacrine or quinacrine mustard treatment.     

Effect of fluorochrome location in protein A on sensing efficiency of IgG

Fragment B of protein A conjugated with fluorescein at various lysine residues is prepared and separated by using a DEAE column in anion-exchange chromatography. The binding of IgG Fc to fragment B contributes to an additional positive electric potential around fragment B. The change in the local electrostatic environment and pH can then be specifically monitored by measuring the fluorescence intensity of fluorescein conjugated with fragment B before and after the introduction of IgG. The studies for the quantitative dependence of fluorescein location on the effectiveness of fluorescein for sensing the protein A-IgG reaction are presented and discussed. (c) 1993 John Wiley & Sons, Inc.     

Uncoating of influenza virus in endosomes

The intracellular uncoating site of influenza virus was studied by measuring the fluorescence intensity of probes conjugated to the virus or the isolated hemagglutinin and also by assaying virus replication under various incubation conditions. Acidification of the viral environment was monitored by the decrease in the fluorescence intensity of fluorescein isothiocyanate, and transport of the virus particles into secondary lysosomes was assayed by the increase in the fluorescence intensity of fluorescein isothiocyanate diphosphate. The intracellular pH was estimated by the ratio of fluorescence intensities excited at two different wavelengths. It was found that the viral environment became acidified to a pH value of 5.1 to 5.2 within 10 min at 37 degrees C or 1 h at 20 degrees C after endocytosis. Addition of ammonium chloride to the medium rapidly raised the pH to 6.7. Transport of the virus particles into the secondary lysosomes was slower and negligibly low during those incubation periods. Virus replication occurred when the cells were incubated for 10 min at 37 degrees C or for 1 h at 20 degrees C, followed by incubation in the presence of ammonium chloride for a total of 12 h. These results indicate the uncoating of influenza virus in endosomes before reaching the secondary lysosomes.     

Estimation of the degradation of endocytosed material by flow cytofluorometry using two neoglycoproteins containing different numbers of fluorescein molecules

The fluorescence properties of fluorescein bound to protein are used to quantitate by flow cytofluorometry the degradation of fluorescein-labeled alpha-glucosylated serum albumin (fluorescein-labeled neoglycoprotein) after endocytosis by the membrane lectin of Lewis lung carcinoma cells (3LL cells). The quantum yield of fluorescein bound to a protein decreases when the number of fluorescein residues per protein molecule increases; however, after proteolytic digestion the mean fluorescence intensity of a fluorescein molecule is constant and equal to that of free fluorescein. The extent of the degradation of the endocytosed neoglycoprotein was determined with a flow cytofluorometer by using two neoglycoproteins containing either a small or a large number of fluorescein residues per neoglycoprotein molecule. At 4 degrees C, 3LL cells bind 750,000 molecules of fluorescein-labeled alpha-glucosylated serum albumin with an apparent binding constant of 2 X 10(6) 1 X mole-1. At 37 degrees C, after 4 hr incubation 2.2 X 10(6) molecules of fluorescent alpha-glucosylated serum albumin were cell-associated, and of these at least one third were degraded.     

Fluorescence enhancement of fluorophores tethered to different sized silver colloids deposited on glass substrate

We studied fluorescence enhancements of fluorescein tethered to silver colloids of different size. Thiolated 23-mer oligonucleotide (ss DNA-SH) was bound selectively to silver colloids deposited on 3-aminopropyltriethoxysilane (APS)-treated quartz slides. Fluorescein-labeled complementary oligonucleotide (ss Fl-DNA) was added in an amount significantly lower than the amount of unlabeled DNA tethered to the colloids. The hybridization kinetics, observed as an increase in fluorescence emission, on small (30-40 nm) and large (> 120 nm) colloids were similar. However, the final fluorescence intensity of the sample with large colloids was about 50% higher than that observed for the sample with small colloids. The reference sample without ss DNA-SH was used to estimate the fluorescence enhancements of fluorescein tethered to the small colloids (E = 2.7) and to the large colloids (E = 4.1) due to its steady fluorescence signal. The proposed method, based on controlled hybridization with minimal amount of fluorophore labeled ss DNA, can be used to reliably estimate the fluorescence enhancements on any silver nanostructures.