Physical and genetic characterization of the glucitol operon in Escherichia coli.

The glucitol (gut) operon has been identified in the colony bank of Clark and Carbon (A. Sancar and W. D. Rupp, Proc. Natl. Acad. Sci. USA 76:3144-3148, 1979). We subcloned the gut operon by using paCYC184, pACYC177, and pBR322. The operon, which is encoded in a 3.3-kilobase nucleotide fragment, consists of the gutC, gutA, gutB, and gutD genes. The repressor of the gut operon seemed to be encoded in the region downstream from the operon. The gene products of the gut operon were identified by using maxicells. The apparent molecular weights of the glucitol-specific enzyme II (product of the gutA gene), enzyme III (product of the gutB gene), and glucitol-6-phosphate dehydrogenase (product of the gutD gene) were about 46,000, 13,500, and 27,000, respectively, as estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.     

Nucleotide sequence of the mannitol (mtl) operon in Escherichia coli

The nucleotide sequence of the known portions of the mannitol operon in Escherichia coli (mtlOPAD) has been determined. Both the operator-promoter region and the intercistronic region between the mtlA and mtlD genes (encoding the mannitol-specific Enzyme II of the phosphotransferase system and mannitol-1-phosphate dehydrogenase, respectively) show parallels with corresponding regions of the glucitol (gut) operon, but neither the mtlA nor the mtlD gene products show obvious homology with the corresponding gene products of the glucitol operon. Five potential cyclic AMP receptor protein binding sites were identified in the mtlOP region, all showing near identity with the consensus sequence. Four regions of dyad symmetry (four to seven bases in length), serving as potential repressor binding sites, overlap with the potential cyclic AMP receptor protein binding sites. Repetitive extragenic palindromic (REP) sequences, forming stem-loop structures in the intercistronic region between mtlA and mtlD and following the mtlD gene were identified. Probable terminator sequences were not found in any of these three regulatory regions. Mannitol-1-phosphate dehydrogenase exhibits two overlapping, potential NAD+ binding sites near the N-terminus of the protein. Computer techniques were used to analyse the mtlD gene and its product.     

Nucleotide sequence of the melB gene and characteristics of deduced amino acid sequence of the melibiose carrier in Escherichia coli

The nucleotide sequence of the melB gene coding for the melibiose carrier in Escherichia coli has been determined. The melibiose carrier is predicted to consist of 469 amino acid residues, resulting in a protein with a molecular weight of 52,029. The predicted carrier protein is highly hydrophobic (70% nonpolar amino acid residues). The hydropathic profile suggests that there are 10 long hydrophobic segments in the primary structure of the carrier protein. Most of them seem to traverse the membrane. Although the hydropathic profile of the melibiose carrier is similar to that of the lactose carrier as a whole, homology in the primary structure between the two carriers is very low. Furthermore, no homology in the nucleotide sequence is found in the structural genes for the two carriers. However, the nucleotide sequences of the intergenic regions are very similar between the melibiose operon and the lactose operon. There is a typical intercistronic regulatory sequence in the 3'-flanking region of the melB as well as in that of the lacY, which suggests the presence of another gene downstream of the melB.     

Identification of the genes for the lactose-specific components of the phosphotransferase system in the lac operon of Staphylococcus aureus

The nucleotide and deduced amino acid sequences of the lacE and lacF genes, which code for the lactose-specific Enzyme II and Enzyme III of the Staphylococcus aureus phosphotransferase system, are presented. The primary translation products consist of a hydrophobic protein of 572 amino acids (Mr = 62,688) and a polypeptide of 103 amino acids (Mr = 11,372), respectively. The assignment of lacF as the gene for Enzyme IIIlac was based upon the known amino acid sequence of the protein. The identity of lacE as encoding Enzyme IIlac was based upon immunoreactivity of the cloned gene product with antibodies raised against purified Enzyme IIlac from S. aureus and an assay of biological function of the protein expressed in Escherichia coli. The order of the known genes of the S. aureus lac operon is lacF-lacE-lacG, the latter encoding phospho-beta-galactosidase.     

Mannitol-specific enzyme II of the bacterial phosphotransferase system. III. The nucleotide sequence of the permease gene

The nucleotide sequence of the mtlA gene, which codes for the mannitol-specific Enzyme II of the Escherichia coli phosphotransferase system, is presented. From the gene sequence, the primary translation product is predicted to consist of 637 amino acids (Mr = 67,893). This result is compared to the amino acid composition and molecular weight of the purified mannitol Enzyme II protein. The hydrophobic and hydrophilic properties of the enzyme were evaluated along its amino acid sequence using a computer program (Kyte, J., and Doolittle, R. F. (1982) J. Mol. Biol. 157, 105-132). The computer analysis predicts that the NH2-terminal half of the enzyme resides within the membrane, whereas the COOH-terminal half of the enzyme has the properties of a soluble protein. The possible functions of such a protein structure are discussed. RNA mapping has identified the promoter and mRNA start point for the mtl operon.     

Nucleotide sequence of the dmsABC operon encoding the anaerobic dimethylsulphoxide reductase of Escherichia coli

The nucleotide sequence of a 6.5 kilobasepair chromosomal DNA fragment encoding the anaerobic dimethylsulphoxide (DMSO) reductase operon of Escherichia coli has been determined. The DMSO reductase structural operon was shown to consist of three open reading frames, namely dmsABC, encoding polypeptides with predicted molecular weights of 87,350, 23,070, and 30,789 Daltons, respectively. The DMS A polypeptide displayed a high degree of amino acid sequence homology with the single-subunit enzyme, biotin sulphoxide reductase (bisC) and with formate dehydrogenase (fdhF), suggesting that the active site and molybdopterin cofactor binding site that is common to these enzymes is located in the DMS A subunit. A comparison of the predicted N-terminal amino acids of the dmsA gene product to those of the 82,600 subunit of purified DMSO reductase indicated that post-translational processing of a 16 amino acid peptide at the amino terminus of DMS A had occurred. The DMS B polypeptide contains 16 cysteine residues organized in four clusters, two of which are typical of 4Fe-4S binding domains. The DMS C polypeptide is composed of eight segments of hydrophobic amino acids of appropriate length to cross the cytoplasmic membrane, suggesting that this subunit functions to anchor the enzyme to the membrane.     

Nucleotide sequence of dcrA, a Desulfovibrio vulgaris Hildenborough chemoreceptor gene, and its expression in Escherichia coli.

The amino acid sequence of DcrA (Mr = 73,000), deduced from the nucleotide sequence of the dcrA gene from the anaerobic, sulfate-reducing bacterium Desulfovibrio vulgaris Hildenborough, indicates a structure similar to the methyl-accepting chemotaxis proteins from Escherichia coli, including a periplasmic NH2-terminal domain (Mr = 20,700) separated from the cytoplasmic COOH-terminal domain (Mr = 50,300) by a hydrophobic, membrane-spanning sequence of 20 amino acid residues. The sequence homology of DcrA and these methyl-accepting chemotaxis proteins is limited to the COOH-terminal domain. Analysis of dcrA-lacZ fusions in E. coli by Western blotting (immunoblotting) and activity measurements indicated a low-level synthesis of a membrane-bound fusion protein of the expected size (Mr = approximately 137,000). Expression of the dcrA gene under the control of the Desulfovibrio cytochrome c3 gene promoter and ribosome binding site allowed the identification of both full-length DcrA and its NH2-terminal domain in E. coli maxicells.     

The araBAD operon of Salmonella typhimurium LT2. I. Nucleotide sequence of araB and primary structure of its product, ribulokinase

Hybrid plasmids containing the araBAD operon of Salmonella typhimurium LT2 were characterized by Southern blot and genetic analyses. The nucleotide sequence of araB was determined. The araB gene product, ribulokinase (EC 2.7.1.16), was purified and the results of amino acid composition analysis and partial amino acid sequence are in agreement with predictions from the DNA sequence. Ribulokinase is 569 amino acid residues long and has a calculated Mr of 61 793. Ribulokinase shares significant homology with xylulose kinase from Escherichia coli. Codon usage in the araB gene does not favor those codons which have intermediate codon-anticodon binding energy.     

Isolation and characterization of a gene coding for glyceraldehyde-3-phosphate dehydrogenase from Saccharomyces cerevisiae.

A yeast glyceraldehyde-3-phosphate dehydrogenase gene has been isolated from a collection of Escherichia coli transformants containing randomly sheared segments of yeast genomic DNA. Complementary DNA, synthesized from partially purified glyceraldehyde-3-phosphate dehydrogenase messenger RNA, was used as a hybridization probe for cloning this gene. The isolated hybrid plasmid DNA has been mapped with restriction endonucleases and the location of the glyceraldehyde-3-phosphate dehydrogenase gene within the cloned segment of yeast DNA has been established. There are approximately 4.5 kilobase pairs of DNA sequence flanking either side of the glyceraldehyde-3-phosphate dehydrogenase gene in the cloned segment of yeast DNA. The isolated hybrid plasmid DNA has been used to selectively hybridize glyceraldehyde-3-phosphate dehydrogenase messenger RNA from unfractionated yeast poly(adenylic acid)-containing messenger RNA. The nucleotide sequence of a portion of the isolated hybrid plasmid DNA has been determined. This nucleotide sequence encodes 29 amino acids which are at the COOH terminus of the known amino acid sequence of yeast glyceraldehyde-3-phosphate dehydrogenase.     

Nucleotide sequence of the extracellular glucoamylase gene STA1 in the yeast Saccharomyces diastaticus.

The complete nucleotide sequence of the extracellular glucoamylase gene STA1 from the yeast Saccharomyces diastaticus has been determined. A single open reading frame codes for a 778-amino-acid protein which contains 13 potential N-glycosylation sites. In the 5'- and 3'-flanking regions of the gene, there are striking sequence homologies to the corresponding regions of ADH1 for alcohol dehydrogenase and MAT alpha 2 for mating type control in the yeast Saccharomyces cerevisiae. The putative precursor begins with a hydrophobic segment that presumably acts as a signal sequence for secretion. The presumptive signal sequence showed a significant homology to that of Bacillus subtilis alpha-amylase precursor. The next segment, of ca. 320 amino acids, contains a threonine-rich tract in which direct repeat sequences of 35 amino acids exist, and is bordered by a pair of basic amino acid residues (Lys-Lys) which may be a proteolytic processing signal. The carboxy-terminal half of the precursor is a presumptive glucoamylase which contains several peptide segments showing a high degree of homology with alpha-amylases from widely diverse organisms including a procaryote (B. subtilis) and eucaryotes (Aspergillus oryzae and mouse). Analysis of both the nucleotide sequence of the STA1 gene and the amino acid composition of the purified glucoamylase suggested that the putative precursor is processed to yield subunits H and Y of mature enzyme by both trypsin-like and chymotrypsin-like cleavages.     

Cloning,sequencing and partial characterisation of sorbitol transporter (srlT) gene encoding phosphotransferase system,glucitol/sorbitol-specific IIBC components of Erwinia herbicola ATCC 21998 – Cloning,sequencing and partial characterisation of sorbitol specific transporter (srlT) gene of Erwinia herbicola ATCC 21998

A DNA fragment of approximately 1500 bp, harbouring the sorbitol transport gene (srlT), was amplified from the chromosomal DNA of Erwinia herbicola ATCC 21998 by PCR and cloned in Escherichia coli JM109. Degenerate oligonucleotide primers used were designed based on the conserved regions in the gene sequences within the gut operon of E. coli (Gene Bank accession no. J02708) and the srl operon of Erwinia amylovora (Gene Bank accession no. Y14603). The cloned DNA fragment was sequenced and found to contain an open reading frame of 1473 nucleotides coding for a protein of 491 amino acids, corresponding to a mass of 52410 Da. The nucleotide sequence of this ORF was highly homologous to that of the gutA gene of Escherichia coli gut operon, the srlE gene of Shigella flexrni and the sorbitol transporter gene sequence of Escherichia coli K12 (Gene Bank accession nos. J02708, AE016987 and D90892 respectively). The protein sequence showed significant homology to that of the phosphotransferase system i.e. the glucitol/sorbitol-specific IIBC components of Escherichia coli and Erwinia amylovora (P56580, O32522). The cloned DNA fragment was introduced into a pRA90 vector and the recombinant was used for developing srlT mutants of Erwinia herbicola, by homologous recombination. Mutants obtained were unable to grow on minimal medium with sorbitol. The insertion of the pRA90 vector inside the srlT gene sequence of the mutants was confirmed by DNA-DNA hybridisation.