Detection of fungal infestations of wood by ion mobility spectrometry

During their growth on wood many fungi produce characteristic volatile organic compounds as secondary metabolites. These microbial volatile organic compounds (MVOCs) can be used as indicators of fungal growth even when such growth is concealed. In order to investigate the formation of these volatile metabolites on building materials, specimens of pine sapwood on agar media colonized by the dry-rot fungus Serpula lacrymans and a mixture of six moulds were examined. MVOCs from this fungal growth were studied over a period of up to half a year by ion mobility spectrometry (IMS) headspace analysis using a sensitive, portable IMS mini-device. The IMS headspace spectra from the growing fungal specimens obtained during this time span are differed from non-incubated wood specimens and indicate the presence of a mixture of MVOCs. The composition and amount of volatile metabolites of the fungi changed during cultivation. This was confirmed by a principal component analysis (PCA). Identification of different MVOCs in the headspace according to drift time and the mobility of ionized gaseous species in reference to GC-MS investigations were proposed. It was concluded that IMS can be used as a rapid and sensitive on-site method to indicate actively growing fungi concealed within wood.     

Determination of volatile metabolites originating from mould growth on wall paper and synthetic media

Microbial volatile organic compounds (MVOCs) emitted from the mould species Penicillium expansum, P. chrysogenum, Aspergillus versicolor, A. fumigatus, A. niger and Cladosporium cladosporoides were analyzed by means of solid phase microextraction (SPME) and GCMS. The mould species were cultivated on the synthetic agar dichloran chloramphenicol (DG 18) and on wet wall paper. The production of MVOCs was monitored over several weeks to detect changes in the emission rates between the initial stage and later periods of growth. The cultivation on the synthetic agar resulted in MVOC patterns with a wide variety of signals. In contrast, the growth on wet wall paper led to changed MVOC patterns with less signals. The emission rates were drastically reduced. Components emitted by all six fungi species on wall paper were 2-pentanol and 2-pentanone. 1-Octen-3-ol was emitted by five fungi species. 2-Pentanol was only detected in considerable amounts during the first days of growth whereas 1-octen-3-ol had a more constant emission rate over the whole period of growth. On the basis of our studies some MVOCs could be proposed as specific for single fungi on wall paper, e.g. 1,3-dimethoxybenzene for A. versicolor and 2,4-pentandione for A. fumigatus.     

Identification and profiling of volatile metabolites of the biocontrol fungus Trichoderma atroviride by HS-SPME-GC-MS

In the present study we describe a method, which is based on solid phase microextraction (SPME) coupled to gas chromatography-mass spectrometry (GC-MS) and which can be used for the profiling of microbial volatile organic compounds (MVOCs) in the headspace (HS) of cultures of filamentous fungi. The method comprises the following successive steps: 1. growth of the fungus on a solid culture medium directly in headspace vials, 2. measurement of volatiles by HS-SPME-GC-MS, 3. deconvolution of mass spectra, 4. identification of volatiles by comparison of measured, deconvoluted mass spectra and linear temperature programmed retention indices (LTPRI) on two stationary GC phases with database entries and LTPRI published in the literature, and 5. profiling of the identified MVOCs.The developed method was successfully applied to cultures of the biocontrol fungus Trichoderma atroviride. An in-house library consisting of mass spectra and LTPRI values of fungal VOCs was established and used to study the profiles of MVOCs of this fungus. In total, 25 different MVOCs were identified by applying strict criteria (spectral match factor at least 90% and a maximum relative deviation of LTPRI of ± 2% from literature values). The MVOCs were assigned to the compound classes of alcohols, ketones, alkanes, furanes, pyrones (mainly the bioactive 6-pentyl-alpha-pyrone), mono- and sesquiterpenes, 13 of which have never been reported to be produced by Trichoderma spp. before. Eleven of these volatiles have been additionally confirmed using authentic standards. Finally, time course experiments and cultivation of T. atroviride in the presence of the mycotoxin fusaric acid demonstrated the potential of the method to study the dynamics of MVOC profiles as well as the effect of different environmental/biological conditions on the expression of MVOCs of filamentous fungi.     

Effect of chlorine dioxide gas on fungi and mycotoxins associated with sick building syndrome

The growth of indoor molds and their resulting products (e.g., spores and mycotoxins) can present health hazards for human beings. The efficacy of chlorine dioxide gas as a fumigation treatment for inactivating sick building syndrome-related fungi and their mycotoxins was evaluated. Filter papers (15 per organism) featuring growth of Stachybotrys chartarum, Chaetomium globosum, Penicillium chrysogenum, and Cladosporium cladosporioides were placed in gas chambers containing chlorine dioxide gas at either 500 or 1,000 ppm for 24 h. C. globosum was exposed to the gas both as colonies and as ascospores without asci and perithecia. After treatment, all organisms were tested for colony growth using an agar plating technique. Colonies of S. chartarum were also tested for toxicity using a yeast toxicity assay with a high specificity for trichothecene mycotoxins. Results showed that chlorine dioxide gas at both concentrations completely inactivated all organisms except for C. globosum colonies which were inactivated an average of 89%. More than 99% of ascospores of C. globosum were nonculturable. For all ascospore counts, mean test readings were lower than the controls (P < 0.001), indicating that some ascospores may also have been destroyed. Colonies of S. chartarum were still toxic after treatment. These data show that chlorine dioxide gas can be effective to a degree as a fumigant for the inactivation of certain fungal colonies, that the perithecia of C. globosum can play a slightly protective role for the ascospores and that S. chartarum, while affected by the fumigation treatment, still remains toxic.     

Headspace solid-phase microextraction and capillary gas chromatographic-mass spectrometric determination of rivastigmine in canine plasma samples

A simple, rapid and sensitive method for determination of rivastigmine in plasma samples was developed using headspace solid-phase microextraction (HS-SPME) and gas chromatography with mass spectrometry (GC-MS). The optimum conditions for the SPME procedure were: headspace extraction on a 65-microm polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber; 0.5 ml of plasma modified with 1.0 ml of sodium hydroxide-sodium carbonate solution (0.7 M:0.5M); extraction temperature of 100 degrees C, with stirring at 2000 rpm for 30 min. The calibration curve showed linearity in the range from 0.2 to 80 ng/ml with regression coefficient corresponding to 0.9965 and coefficient of the variation of the points of the calibration curve lower than 10%. The quantification limit for rivastigmine in plasma was 0.2 ng/ml. The method was applied to determination of rivastigmine in canine plasma samples from animals after a single oral administration.     

Aerosolization of particulate (1-->3)-beta-D-glucan from moldy materials

Mold-damaged building materials may contain biologically active agents, such as (1-->3)-beta-D-glucan, allergens, and mycotoxins, which have been associated with adverse health effects. The release of these components from contaminated surfaces into the air is not well understood. The purpose of this study was to characterize the release of particulate (1-->3)-beta-D-glucan from the surface of artificially mold-contaminated materials. Aspergillus versicolor and Stachybotrys chartarum were grown on malt extract agar (MEA), white ceiling tiles, and a wall-papered gypsum board for 1 and 6 months. The (1-->3)-beta-D-glucan on the surfaces of moldy materials and in air samples collected from these materials was analyzed by the Limulus amebocyte lysate assay. The aerosolization ratio was defined as the amount of (1-->3)-beta-D-glucan in the air divided by the amount on the surface. The results showed that the aerosolization of particulate (1-->3)-beta-D-glucan was influenced mainly by the type of material and the fungal species. For A. versicolor, the aerosolization ratios of particulate (1-->3)-beta-D-glucan released from the three types of material were not significantly different. However, the ratios for S. chartarum released from ceiling tiles and gypsum board were significantly higher than the ratios for this organism released from MEA (P < 0.001) and were comparable to those for A. versicolor. These findings indicate that the use of MEA in aerosolization experiments is likely to underestimate the release of S. chartarum particles from building materials. These results provide important background information for design of future laboratory or animal experiments, as well as for interpretation of field measurement data.     

微生物挥发性代谢产物的产生途径及其质谱检测技术

微生物挥发性代谢产物（MVOCs）是微生物代谢产物的重要组成部分,是人类了解微生物生命活动本质规律的重要窗口,也是提高微生物利用价值的重要物质基础。MVOCs种类较多,按其化学结构不同可分为醇类、醛类、酸类、酯类和酮类等化合物。由于这些化合物的理化性质差异较大,在样品中含量低且浓度差异大,经常与大量的复杂基体共存,一般需要对其进行分离、富集后才能够进行分析测定。本文归纳了常见MVOCs的产生途径,综述了常规质谱分析方法在MVOCs分析检测中的应用,同时结合本课题组的研究工作,介绍了新兴的复杂基体样品快速质谱分析技术的原理,评述了它们在MVOCs检测中的优势,并展望了质谱技术在MVOCs检测方面的发展趋势。     

Autoregulatory Properties of (+)-Thujopsene and Influence of Environmental Conditions on Its Production by <Emphasis Type="Italic">Penicillium decumbens</Emphasis>

A Penicillium decumbens strain was collected from a water-damaged building, and the production of microbial volatile organic compounds (MVOCs) was investigated by means of headspace solid-phase microextraction, followed by GC-MS analysis. The strain was characterized by a high production of (+)-thujopsene. The influence of various temperatures, relative humidity (RH) values, substrates, and inoculum concentrations on fungal growth and (+)-thujopsene production was studied. The optimal temperature and relative humidity for P. decumbens growth were 30°C and 100% RH, respectively. In general, the more favourable the incubation parameters were for growth, the faster maximum (+)-thujopsene production was reached. Moreover, the antifungal activity of thujopsene was tested against 16 fungal strains. The growth of five of these fungal strains was negatively affected both by thujopsene alone and when grown in contact with the MVOCs produced by P. decumbens. Following these results and since growth of P. decumbens itself was also inhibited by thujopsene, an autoregulatory function for this compound was proposed. Few data are present in the literature about chemical communication between fungi. The present research could, therefore, contribute to understanding fungal metabolism and behaviour in indoor environments.     

Potential of the volatile-producing fungus Muscodor albus for control of building molds

The possibility of using the volatile-producing fungus Muscodor albus for biofumigation against building molds was investigated. Several species of Aspergillus and Penicillium as well as fungi belonging to nine other genera were inhibited or killed in vitro by volatiles produced by potato dextrose agar or rye grain cultures of M. albus. Trichoderma viride was the only fungus that was not inhibited by M. albus volatiles. To test biofumigation as a preventative treatment against fungal colonization of building material, dry pieces of gypsum drywall were fumigated with grain cultures of M. albus in closed boxes. After a simulated water damage and incubation under saturated humidity for 2 weeks, untreated drywall developed natural fungal populations of about 10(5)-10(6) cfu/cm2, while drywall fumigated with M. albus culture (20 g/11 L) had nondetectable fungal populations. To test for curative ability, moist pieces of drywall heavily colonized with Cladosporium cladosporioides, Aspergillus niger, or Stachybotrys chartarum were fumigated for 48 h with grain cultures of M. albus. Cladosporium cladosporioides was eliminated within 48 h, while A. niger and S. chartarum were usually more resistant. However, a longer curative fumigation of 96 h was effective in reducing A. niger or naturally occurring mold populations by about 5 log values. The production of volatile organic compounds from 20 g of rye grain culture in 11 L containers was monitored by solid-phase micro extraction and gas chromatography. Concentrations of isobutyric acid, the most abundant volatile, increased gradually in the headspace until it reached 25 microg/L (m/v) within 96 h. The second and third most abundant compounds, 2-methyl-1-butanol and isobutanol, peaked at about 10 and 5 microg/L (m/v), respectively, within the first 24 h and declined gradually afterwards.     

Development of a solid phase microextraction-gas chromatography method to determine N-hydroxymethyl-N-methylformamide and N-methylformamide in urine

A headspace solid phase microextraction (SPME) method has been developed to determine metabolites of dimethylformamide, N-hydroxymethyl-N-methylformamide, and N-methylformamide (NMF) as NMF in urine by gas chromatography with nitrogen-phosphorus detector (GC-NPD). An SPME holder with a 65-microm PDMS/DVB fiber coating was used. Optimal desorption conditions were 250 degrees C for 1 min, adsorption at 80 degrees C for 15 min, and 3.00 mL of sample in the headspace vial. The method presented good resolution, repeatability, recovery, detection limit, ruggedness and response linearity.     

Optimization of microwave-assisted extraction followed by solid phase micro extraction and gas chromatography-mass spectrometry detection for the assay of some semi volatile organic pollutants in sebum

Methodology using MAE/SPME/GC-MS is being pursued for the analysis of organic pollutants in sebum. The microwave-assisted extraction (MAE) of standards of semi volatile organic pollutants from sebum was optimized. All compounds were extracted from sebum with recoveries analyzed by GC/MS ranging from 94% to 100% under the optimum MAE conditions: 10mL acetone-hexane (2:1), 60 degrees C, and 10 min microwave heating. To improve the detection limits a SPME procedure was optimized. Linearity ranged from 0.70 ppb to 25 ppb. R.S.D. were in the range of 1-23% for the SPME step. Preliminary real samples were analyzed and a range of compounds was detected. The optimized MAE/SPME/GC-MS methodology promises to be useful for different applications.     

Rapid identification of microbial VOCs from tobacco molds using closed-loop stripping and gas chromatography/time-of-flight mass spectrometry

Several microbial volatile organic compounds (MVOCs) that can serve as potential chemical markers for microbial contamination in tobacco have been identified. Four different fungal species, Aspergillus niger (AN), A. ornatus (AO), Pencillium chrysogenum (PC) and Rhizopus stolonifer (RS), commonly reported in moldy tobacco were cultured and screened for MVOCs. Because the MVOCs emitted by a microbial species are substrate specific, the fungal strains were separately grown on potato dextrose agar (PDA) and tobacco products. MVOCs from the mold cultures grown on PDA and tobacco products were extracted using closed-loop stripping analysis (CLSA) and identified by gas chromatography/time-of-flight mass spectrometry (GC/TOF-MS). Some of the prominent tobacco mold markers identified by this method include: 1-octen-3-ol; 2-octen-1-ol; 2-methyl-1-butanol; 3-methyl-1-butanol; 1-octene and 2-pentanone. In particular, 1-octen-3-ol was detected in all the mold cultures and moldy tobacco samples analyzed. Olfactory evaluation of 1-octen-3-ol indicated a characteristic musty odor and the odor threshold was determined to be approximately 200 ng/ml. The limits of detection for 1-octen-3-ol using GC/TOF-MS and GC/mass selective detector (MSD) in the full-scan mode and selected ion monitoring (SIM) mode were investigated. The CLSA-GC/TOF-MS demonstrates a fast, sensitive and semi-quantitative analytical technique for screening tobacco materials for the presence of mold via chemical markers of microbial contamination.     

Identification of volatile markers for indoor fungal growth and chemotaxonomic classification of Aspergillus species

Microbial volatile organic compounds (MVOCs) were collected in water-damaged buildings to evaluate their use as possible indicators of indoor fungal growth. Fungal species isolated from contaminated buildings were screened for MVOC production on malt extract agar by means of headspace solid-phase microextraction followed by gas chromatography-mass spectrometry (GC-MS) analysis. Some sesquiterpenes, specifically derived from fungal growth, were detected in the sampled environments and the corresponding fungal producers were identified. Statistical analysis of the detected MVOC profiles allowed the identification of species-specific MVOCs or MVOC patterns for Aspergillus versicolor group, Aspergillus ustus, and Eurotium amstelodami. In addition, Chaetomium spp. and Epicoccum spp. were clearly differentiated by their volatile production from a group of 76 fungal strains belonging to different genera. These results are useful in the chemotaxonomic discrimination of fungal species, in aid to the classical morphological and molecular identification techniques.     

Toxicity screening of materials from buildings with fungal indoor air quality problems (Stachybotrys chartarum)

Samples of building materials visibly contaminated with moisture-related fungi (drywall, fiberglass, wallpaper, wood) were tested with indirect (FFL) and direct (MTT) cytotoxicity screening tests that are particularly sensitive toStachybotrys chartarum toxins. In addition, microscopic, chemical, immunochemical (Roridin A enzyme immunoassay) and mycological culture analyses were performed. In all cases in which building occupants had reported verifiable skin, mucous membrane, respiratory, central nervous system or neuropsychological abnormalities, cytotoxicity was identified. Results of a cytotoxicity screening test of field samples, such as the direct MTT test method, will give investigators of health problems related to indoor air quality problems important toxicity information.     

Associations between fungal species and water-damaged building materials

Fungal growth in damp or water-damaged buildings worldwide is an increasing problem, which has adverse effects on both the occupants and the buildings. Air sampling alone in moldy buildings does not reveal the full diversity of fungal species growing on building materials. One aim of this study was to estimate the qualitative and quantitative diversity of fungi growing on damp or water-damaged building materials. Another was to determine if associations exist between the most commonly found fungal species and different types of materials. More than 5,300 surface samples were taken by means of V8 contact plates from materials with visible fungal growth. Fungal identifications and information on building material components were analyzed using multivariate statistic methods to determine associations between fungi and material components. The results confirmed that Penicillium chrysogenum and Aspergillus versicolor are the most common fungal species in water-damaged buildings. The results also showed Chaetomium spp., Acremonium spp., and Ulocladium spp. to be very common on damp building materials. Analyses show that associated mycobiotas exist on different building materials. Associations were found between (i) Acremonium spp., Penicillium chrysogenum, Stachybotrys spp., Ulocladium spp., and gypsum and wallpaper, (ii) Arthrinium phaeospermum, Aureobasidium pullulans, Cladosporium herbarum, Trichoderma spp., yeasts, and different types of wood and plywood, and (iii) Aspergillus fumigatus, Aspergillus melleus, Aspergillus niger, Aspergillus ochraceus, Chaetomium spp., Mucor racemosus, Mucor spinosus, and concrete and other floor-related materials. These results can be used to develop new and resistant building materials and relevant allergen extracts and to help focus research on relevant mycotoxins, microbial volatile organic compounds (MVOCs), and microparticles released into the indoor environment.     

Detection of airborne Stachybotrys chartarum macrocyclic trichothecene mycotoxins on particulates smaller than conidia

Highly respirable particles (diameter, <1 microm) constitute the majority of particulate matter found in indoor air. It is hypothesized that these particles serve as carriers for toxic compounds, specifically the compounds produced by molds in water-damaged buildings. The presence of airborne Stachybotrys chartarum trichothecene mycotoxins on particles smaller than conidia (e.g., fungal fragments) was therefore investigated. Cellulose ceiling tiles with confluent Stachybotrys growth were placed in gas-drying containers through which filtered air was passed. Exiting particulates were collected by using a series of polycarbonate membrane filters with decreasing pore sizes. Scanning electron microscopy was employed to determine the presence of conidia on the filters. A competitive enzyme-linked immunosorbent assay (ELISA) specific for macrocyclic trichothecenes was used to analyze filter extracts. Cross-reactivity to various mycotoxins was examined to confirm the specificity. Statistically significant (P < 0.05) ELISA binding was observed primarily for macrocyclic trichothecenes at concentrations of 50 and 5 ng/ml and 500 pg/ml (58.4 to 83.5% inhibition). Of the remaining toxins tested, only verrucarol and diacetylverrucarol (nonmacrocyclic trichothecenes) demonstrated significant binding (18.2 and 51.7% inhibition, respectively) and then only at high concentrations. The results showed that extracts from conidium-free filters demonstrated statistically significant (P < 0.05) antibody binding that increased with sampling time (38.4 to 71.9% inhibition, representing a range of 0.5 to 4.0 ng/ml). High-performance liquid chromatography analysis suggested the presence of satratoxin H in conidium-free filter extracts. These data show that S. chartarum trichothecene mycotoxins can become airborne in association with intact conidia or smaller particles. These findings may have important implications for indoor air quality assessment.     

Identity of the xerophilic species Aspergillus penicillioides: Integrated analysis of the genotypic and phenotypic characters

We examined the identity of Aspergillus penicillioides, the typical xerophilic and strictly anamorphic species, using an integrated analysis of the genotypic and phenotypic characters. Our experimental methods on two genotypic characters, i.e., DNA base composition using the HPLC method and DNA relatedness using the nitrocellulose filter hybridization technique between A. flavus, A. oryzae, and their close relations revealed a good agreement with the values by buoyant density (for DNA base composition) and spectrophotometric determination (for DNA relatedness) reported by Kurtzman et al. in 1986. On the basis of these comparisons, we examined DNA base composition and DNA relatedness of six selected strains of A. penicillioides, including IFO 8155 (originally described as A. vitricola), one strain of A. restrictus, and the respective strains from Eurotium amstelodami, E. repens, and E. rubrum. As a result, five strains within A. penicillioides, including the neotype strain NRRL 4548, had G+C contents of 46 to 49 mol%, whereas IFO 8155 had 50 mol%. A. restrictus had 52 mol%, and three Eurotium species ranged from 46 to 49 mol%. The DNA relatedness between A. penicillioides (five strains), except for IFO 8155, exhibited values greater than 70%, but the DNA complementarity between four strains and IFO 8155 in A. penicillioides revealed values of less than 40%. DNA relatedness values between three species of Eurotium were 65 to 72%. We determined 18S, 5.8S, and ITS rDNA sequences as other genotypic characters from A. penicillioides (six strains), A. restrictus, and related teleomorphic species of Eurotium. In three phylogenetic trees inferred from these sequences, five strains of A. penicillioides, including the neotype strain, were closely related to each other, whereas IFO 8155 was distantly related and grouped with other xerophilic species. Our results have suggested that A. penicillioides typified by NRRL 4548 and A. penicillioides IFO 8155 (ex holotype of A. vitricola) are not conspecific. The enzyme patterns as a genotypic character and general morphology and conidial ornamentation types as phenotypic characters supported this conclusion. Therefore the name A. vitricola Ohtsuki, typified by the holotype strain IFO 8155, should be revived. Evolutionary affinities among Aspergillus species and related teleomorphs, including the xerophilic taxa, are discussed.     

The ability of filamentous fungi to produce acids on indoor building materials

Sixty two filamentous fungi isolated from paint coatings, wallpaper, carton-gypsum board, and indoor air in buildings were screened for acid activity. It was found that 64.5% of strains produce acids on medium with bromo-cresol purple, where 18% of the strains were distinguished by very high acid activity (acid activity coefficient Q = 1.32–2.83), including the species:Aspergillus niger, Aspergillus versicolor, Penicillium expansum, Penicillium brevicom pactum, Penicillium chrysogenum, Cladosporium cladosporioides, Stachybotrys chartarum, Mucor globosus, Ulocladium chartarum andAlternaria alternata. Research indicated that filamentous fungi considerably decrease the pH of the medium when that medium containing building material. The greatest acid production and pH decrease of the medium was observed during the growth of filamentous fungi in a medium with mortar, while the production of acids was less in a medium with cartongypsum board, gypsum, and wallpaper. Filamentous fungi produced succinic, oxalic, malic and fumaric acids in the medium with indoor building materials. It was stated that the type of building material affects the spectrum and quantity of organic acids produced by filamentous fungi.     

Investigation of volatile biomarkers in lung cancer blood using solid-phase microextraction and capillary gas chromatography-mass spectrometry

In the present work, solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) was developed for investigation of lung cancer volatile biomarkers. Headspace SPME conditions (fiber coating, extraction temperature and extraction time) and desorption conditions were optimized and applied to determination of volatiles in human blood. To find the biomarkers of lung cancer, investigation of volatile compounds in lung cancer blood and control was performed by using the present method. Concentrations of hexanal and heptanal in lung cancer blood were found to be much higher than those in control blood. The two molecules of hexanal and heptanal were regarded as biomarkers of lung cancer. By comparison of volatiles in breath and in blood, it is demonstrated that hexanal and heptanal in breath were originated from blood and screening of lung cancer by breath analysis be feasible. These results show that SPME/GC-MS is a simple, rapid and sensitive method very suitable for investigation of volatile disease markers in human blood.     

Quantifying mold biomass on gypsum board: comparison of ergosterol and beta-N-acetylhexosaminidase as mold biomass parameters

Two mold species, Stachybotrys chartarum and Aspergillus versicolor, were inoculated onto agar overlaid with cellophane, allowing determination of a direct measurement of biomass density by weighing. Biomass density, ergosterol content, and beta-N-acetylhexosaminidase (3.2.1.52) activity were monitored from inoculation to stationary phase. Regression analysis showed a good linear correlation to biomass density for both ergosterol content and beta-N-acetylhexosaminidase activity. The same two mold species were inoculated onto wallpapered gypsum board, from which a direct biomass measurement was not possible. Growth was measured as an increase in ergosterol content and beta-N-acetylhexosaminidase activity. A good linear correlation was seen between ergosterol content and beta-N-acetylhexosaminidase activity. From the experiments performed on agar medium, conversion factors (CFs) for estimating biomass density from ergosterol content and beta-N-acetylhexosaminidase activity were determined. The CFs were used to estimate the biomass density of the molds grown on gypsum board. The biomass densities estimated from ergosterol content and beta-N-acetylhexosaminidase activity data gave similar results, showing significantly slower growth and lower stationary-phase biomass density on gypsum board than on agar.