Lipid production by microalgae <Emphasis Type="Italic">Chlorella protothecoides</Emphasis> with volatile fatty acids (VFAs) as carbon sources in heterotrophic cultivation and its economic assessment

Volatile fatty acids (VFAs) that can be derived from food wastes were used for microbial lipid production by Chlorella protothecoides in heterotrophic cultures. The usage of VFAs as carbon sources for lipid accumulation was investigated in batch cultures. Culture medium, culture temperature, and nitrogen sources were explored for lipid production in the heterotrophic cultivation. The concentration and the ratio of VFAs exhibited significant influence on cell growth and lipid accumulation. The highest lipid yield coefficient and lipid content of C. protothecoides grown on VFAs were 0.187 g/g and 48.7 %, respectively. The lipid content and fatty acids produced using VFAs as carbon sources were similar to those seen on growth and production using glucose. The techno-economic analysis indicates that the biodiesel derived from the lipids produced by heterotrophic C. protothecoides with VFAs as carbon sources is very promising and competitive with other biofuels and fossil fuels.     

Magnetophoretic harvesting of freshwater microalgae using polypyrrole/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite and its reusability

A magnetophoretic harvesting agent, a polypyrrole/Fe₃O₄ magnetic nanocomposite, is proposed as a cost and energy efficient alternative to recover biomass of the microalgae Botryococcus braunii, Chlorella protothecoides, and Chlorella vulgaris from their culture media. The maximal recovery efficiency reached almost 99 % for B. braunii, 92.4 % for C. protothecoides, and 90.8 % for C. vulgaris. The maximum adsorption capacity (Q ₀) of the magnetic nanocomposite for B. braunii (63.49 mg dry biomass mg^?1 PPy/Fe₃O₄) was higher than that for C. protothecoides (43.91 mg dry biomass mg^?1 PPy/Fe₃O₄) and C. vulgaris (39.98 mg dry biomass mg^?1 PPy/Fe₃O₄). The highest harvesting efficiency for all the studied microalgae were at pH 10.0, and measurement of zeta-potential confirmed that the flocculation was induced by charge neutralization. This study showed that polypyrrole/Fe₃O₄ can be a promising flocculant due to its high efficacy, low dose requirements, short settling time, its integrity with cells, and with great potential for saving energy because of its recyclability.     

Optimization of aeration for biodiesel production by <Emphasis Type="Italic">Scenedesmus obliquus</Emphasis> grown in municipal wastewater

Despite the significant breakthroughs in research on microalgae as a feedstock for biodiesel, its production cost is still much higher than that of fossil diesel. One possible solution to overcome this problem is to optimize algal growth and lipid production in wastewater. The present study examines the optimization of pretreatment of municipal wastewater and aeration conditions in order to enhance the lipid productivity of Scenedesmus obliquus. Results showed that no significant differences were recorded in lipid productivity of S. obliquus grown in primary settled or sterilized municipal wastewater; however, ultrasound pretreatment of wastewater significantly decreased the lipid production. Whereas, aeration rates of 0.2 vvm significantly increased lipid content by 51 %, with respect to the non-aerated culture, which resulted in maximum lipid productivity (32.5 mg L^?1 day^?1). Furthermore, aeration enrichment by 2 % CO₂ resulted in increase of lipid productivity by 46 % over the CO₂ non-enriched aerated culture. Fatty acid profile showed that optimized aeration significantly enhanced monounsaturated fatty acid production, composed mainly of C18:1, by 1.8 times over the non-aerated S. obliquus culture with insignificant changes in polyunsaturated fatty acid proportion; suggesting better biodiesel characteristics for the optimized culture.     

Growth medium standardization and thermotolerance study of the freshwater microalga <Emphasis Type="Italic">Acutodesmus dimorphus—</Emphasis>a potential strain for biofuel production

Microalgal biomass seems to be one of the potential alternative feedstocks for the production of various types of biofuel. In the present study, first of all, suitable growth media and harvesting time were determined for the freshwater chlorophyte microalga Acutodesmus dimorphus. Cultivation of A. dimorphus in BG-11 medium for 15 days resulted in the highest biomass productivity with 24.60 % lipid and 22.78 % carbohydrate contents. Further, thermotolerance property of A. dimorphus was evaluated by heat stressing the cells at 45 °C and 50 °C up to 24 h and determining the cell mortality and pigment composition along with lipid and carbohydrate contents. Chlorophyll and carotenoid contents of cells significantly increased after heat stress at 45 °C. Increasing the heat stress from 8 to 24 h increased the dead cells by 3–4 % at both temperatures, which shows the thermotolerance of A. dimorphus. Lipid content of 27 % and carbohydrate content of 26–28 % even after 24 h of heat stress at 45 and 50 °C suggest A. dimorphus as a potential feedstock for biofuel production.     

Culture medium influence on growth,fatty acid,and pigment composition of <Emphasis Type="Italic">Choricystis minor</Emphasis> var. <Emphasis Type="Italic">minor</Emphasis>: a suitable microalga for biodiesel production

The purposes of this study were to assess the influence of culture medium on biomass production, fatty acid, and pigment composition of Choricystis minor var. minor and to evaluate the use of this microalga as a source of fatty raw material for biodiesel production. Cultures of C. minor var. minor were grown using WC (Wright’s cryptophyte) and BBM (Bold’s Basal medium) media. BBM medium produced more biomass (984.3 mg L^?1) compared to the WC medium (525.7 mg L^?1). Despite this result, WC medium produced a higher methyl ester yield for biodiesel production than the BBM medium (170.0 and 90.2 mg g^?1 of biomass, respectively). The average percentage of fatty acids obtained using the WC medium (17.0 %) was similar to soybean (18.0 %) and with similar biomass fatty acid profile. However, for pigment production, carotenoids and chlorophyll concentrations were twice as high when using the BBM medium.     

High-yield expression,purification, characterization,and structure determination of tag-free <Emphasis Type="Italic">Candida utilis</Emphasis> uricase

We report the successful high-yield expression of Candida utilis uricase in Escherichia coli and the establishment of an efficient three-step protein purification protocol. The purity of the recombinant protein, which was confirmed to be C. utilis uricase by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometer analysis, was >98% and the specific activity was 38.4 IU/mg. Crystals of C. utilis uricase were grown at 18°C using 25% polyethylene glycol 3350 as precipitant. Diffraction by the crystals extends to 1.93 Å resolution, and the crystals belong to the space group P2₁2₁2₁ with unit cell parameters a?=?69.16 Å, b?=?139.31 Å, c?=?256.33 Å, and α?=?β?=?γ?=?90°. The crystal structure of C. utilis uricase shares a high similarity with other reported structures of the homologous uricases from other species in protein database, demonstrating that the three-dimensional structure of the protein defines critically to the catalytic activities.     

<Emphasis Type="Italic">Paradevosia shaoguanensis</Emphasis> gen. nov., sp. nov., Isolated from a Coking Wastewater

A Gram staining negative, rod-shaped, aerobic bacterial strain J5-3^T with a single polar flagellum was isolated from coking wastewater collected from Shaoguan, Guangdong, China. It was motile and capable of optimal growth at pH 6–8, 30 °C, and 0–2 % (w/v) NaCl. Its predominant fatty acids were 11-methyl C_18:1 ω7c (29.2 %), C_16:0 (20.6 %), C_19:0 cyclo ω8c (18.2 %), C_18:0 (11.0 %), and C_18:1 ω7c/C_18:1 ω6c (10.9 %) when grown on trypticase soy agar. The major polar lipids were diphosphatidylglycerol, phosphatidylglycerol, two unknown glycolipids (GL1, GL2), and two unknown phospholipid (PL1, PL2). The predominant ubiquinone was Q-10, and the genome DNA G+C content was 61.7 mol %. Phylogenetic analysis based on the 16S rRNA gene sequences indicated that strain J5-3^T belonged to the family Hyphomicrobiaceae in Alphaproteobacteria. It shared the 16S rRNA gene sequence similarities of 93.8–96.1 % with the genus Devosia, 94.5–94.8 % with the genus Pelagibacterium, and <92.0 % with all the other type strains in family Hyphomicrobiaceae. It can be distinguished from the closest phylogenetic neighbors based on several phenotypic and genotypic features, including α-galactosidase activity, tetracycline susceptibility, major fatty acid composition, polar lipid profile, DNA gyrase B subunit (gyrB) gene sequence, and random-amplified polymorphic DNA profile. Therefore, we consider strain J5-3^T to represent a novel species of a novel genus within the family Hyphomicrobiaceae, for which the name Paradevosia shaoguanensis gen. nov., sp. nov. is proposed. The type strain of Paradevosia shaoguanensis is J5-3^T (=CGMCC 1.12430^T =LMG 27409^T).     

Enrichment as a screening method for a high-growth-rate microalgal strain under continuous cultivation system

Microalgae are a promising feedstock for renewable biodiesel production. High productivity of biodiesel production from microalgae is directly related to growth rate as well as lipid content of cells. In the present study, an enrichment process in a continuous cultivation system was developed to screen a high-growth-rate microalga from a mixed culture of microalgal species; Chlorella vulgaris, Chlorella protothecoides, and Chlamydomonas reinhardtii were used as test organisms for our experiments. The time-dependent washout of mixed microalgal pool was executed to successfully enrich the C. reinhardtii, which exhibits the higher growth rate than C. vulgaris and C. protothecoides under turbidostat conditions within 75 h. The domination of C. reinhardtii in the mixed culture was validated by on-line monitoring of growth rate and flowcytometric analysis. For the time-efficient production of microalgal biomass, this screening process has a high potential to segregate the fast-growing microalgal strains from the pool of various uncharacterized microalgal species and random mutants.     

Comparison of the culture and harvesting of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and <Emphasis Type="Italic">Tetradesmus obliquus</Emphasis> for the removal of pharmaceuticals from water

The objective of this work was to assess and compare the removal efficiency of paracetamol and salicylic acid from aqueous medium by a microalgae-based treatment, using either Chlorella vulgaris or Tetradesmus obliquus. Moreover, considering microalgae application in wastewater treatment, the influence of these pharmaceuticals in the algal nutrient removal capacity was evaluated. The removal of paracetamol by T. obliquus (>40 %) was larger than by C. vulgaris (>21 %) in batch culture, and this was also observed for salicylic acid (>93 % by T. obliquus and >25 % by C. vulgaris). Both strains removed nutrients (phosphate and nitrate) almost completely by the end of the batch culture, but T. obliquus showed the highest efficiency at the steady state conditions of the semicontinuous culture. In spite of this, under the flocculants here tested, the efficiency in the recovery of biomass was much higher for C. vulgaris. These results highlight the importance of strain selection in the application of microalgae for wastewater treatment and, particularly, for the removal of pharmaceuticals.     

Cultivation of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> with swine wastewater and potential for algal biodiesel production

In this study, an alga-based simultaneous process of treating swine wastewater (SWW) and producing biodiesel was explored. Chlorella vulgaris (UTEX-265) was employed as a model species, and a SWW-based medium was prepared by dilution with tap water. Chlorella vulgaris grew well in the SWW-based medium, and at optimum dilution ratios, it exceeded the conventional culture medium in terms of biomass concentration and productivity. In eightfold diluted SWW, which supported the maximum growth, biomass productivity was 0.247 g L^?1 day^?1, while the productivity was merely 0.165 g L^?1 day^?1 in standard tris-acetate-phosphorous (TAP) algal medium. In addition, fatty acid methyl ester (FAME) productivity was greater in the SWW-based medium (0.067 versus 0.058 g L^?1 day^?1). This enhanced productivity resulted in more than 95 % removal of both nitrogen and phosphorous. All these show that C. vulgaris cultivation is indeed possible in a nutrient-rich wastewater with appropriate dilution, and in so doing, the wastewater can effectively be treated.     

Growth and phosphorus removal by <Emphasis Type="Italic">Synechococcus elongatus</Emphasis> co-immobilized in alginate beads with <Emphasis Type="Italic">Azospirillum brasilense</Emphasis>

This study examined the co-immobilization of the cyanobacterium Synechococcus elongatus with the plant growth-promoting bacterium Azospirillum brasilense in alginate beads and its potential application for the removal of phosphorus from aquaculture wastewater. Co-immobilization of both microorganisms significantly increased the cell density of S. elongatus (2852.5?×?10⁴ cells mL^?1) compared with that of immobilization of cyanobacteria alone (1325.2?×?10⁴ cells mL^?1). Chlorophyll a content was similar in co-immobilized (11.1?±?3.5 pg cell^?1) and immobilized S. elongatus (14.5?±?4.9 pg cell^?1). Azospirillum brasilense showed continuous growth until day 2, after which its cell concentration declined until the end of the assay. Co-immobilized S. elongatus removed more phosphorus (44.8 %) than immobilized cyanobacteria cells alone (32.0 %). In conclusion, phosphate removal was greater with free cells of S. elongatus but overlapped with the values that were obtained with the treatment of co-immobilization of cells. Our results demonstrate that A. brasilense enhances the growth of S. elongatus and improves its removal of phosphorus when they are co-immobilized in alginate beads compared with only immobilization of cyanobacteria cells alone.     

Effects of light on production of camptothecin and expression of key enzyme genes in seedlings of <Emphasis Type="Italic">Camptotheca acuminate</Emphasis> Decne

Camptotheca acuminata (C. acuminata) is utilized in preparation of drugs and as constituent in functional foods of China due to high camptothecin (CPT) content in different plant parts. Light intensity is one of the most critical factors which affect plant growth and secondary metabolites. Pot experiment was conducted to study the effect of light intensity (i.e., 100 % irradiance (control), 75 % irradiance, 50 % irradiance and 25 % irradiance) on contents of CPT, activity of enzymes and genes expression related to CPT biosynthesis of C. acuminata seedlings. The study examined total leaf biomass, CPT content, activities of tryptophan synthase (TSB) and tryptophan decarboxylase (TDC), and relative expression of TSB, TDC1, and TDC2 genes. Plants grown in 75 % irradiance possessed the greatest leaf biomass compared with 100 % light irradiance. Highest values of CPT contents were found after 60 days in plants grown in 50 % irradiance, followed by 25, 75 % and full sunlight. Furthermore, activities of TSB, TDC and relative expression of genes of TSB, TDC1, and TDC2, were significantly increased after 60 days of 50 % irradiance compared with full sunlight. Irradiance of 50 % up-regulated the expression of CPT biosynthesis-related genes and induced CPT biosynthesis. In addition to that lower or higher irradiance inhibited the expression of CPT biosynthesis-related genes and CPT biosynthesis. It is concluded that manipulating light intensity can be an effective means to achieve highest CPT yield in medicinal plants.     

Engineering the growth pattern and cell morphology for enhanced PHB production by <Emphasis Type="Italic">Escherichia coli</Emphasis>

E. coli JM109?envC?nlpD deleted with genes envC and nlpD responsible for degrading peptidoglycan (PG) led to long filamentous cell shapes. When cell fission ring location genes minC and minD of Escherichia coli were deleted, E. coli JM109?minCD changed the cell growth pattern from binary division to multiple fissions. Bacterial morphology can be further engineered by overexpressing sulA gene resulting in inhibition on FtsZ, thus generating very long cellular filaments. By overexpressing sulA in E. coli JM109?envC?nlpD and E. coli JM109?minCD harboring poly(3-hydroxybutyrate) (PHB) synthesis operon phbCAB encoded in plasmid pBHR68, respectively, both engineered cells became long filaments and accumulated more PHB compared with the wild-type. Under same shake flask growth conditions, E. coli JM109?minCD (pBHR68) overexpressing sulA grown in multiple fission pattern accumulated approximately 70 % PHB in 9 g/L cell dry mass (CDM), which was significantly higher than E. coli JM109?envC?nlpD and the wild type, that produced 7.6 g/L and 8 g/L CDM containing 64 % and 51 % PHB, respectively. Results demonstrated that a combination of the new division pattern with elongated shape of E. coli improved PHB production. This provided a new vision on the enhanced production of inclusion bodies.     

The effect of temperature on growth and lipid and fatty acid composition on marine microalgae used for biodiesel production

Cultivation temperature is one of the major factors affecting the growth and lipid accumulation of microalgae. In this study, the effects of temperature on the growth, lipid content, fatty acid composition and biodiesel properties of the marine microalgae Chaetoceros sp. FIKU035, Tetraselmis suecica FIKU032 and Nannochloropsis sp. FIKU036 were investigated. These species were cultured at different temperatures (25, 30, 35 and 40 °C). The results showed that the specific growth rate, biomass and lipid content of all microalgae decreased with increasing temperature. With regards to fatty acids, the presence of saturated fatty acids (SFAs) in T. suecica FIKU032 and Nannochloropsis sp. FIKU036 decreased with increasing temperature, in contrast with polyunsaturated fatty acids (PUFAs). Moreover, Chaetoceros sp. FIKU035 was the only species that could grow at 40 °C. The highest lipid productivity was observed in Chaetoceros sp. FIKU035 when cultivated at 25 °C (66.73 ± 1.34 mg L^?1 day^?1) and 30 °C (61.35 ± 2.89 mg L^?1 day^?1). Moreover, the biodiesel properties (cetane number, cold filter plugging point, kinematic viscosity and density) of the lipids obtained from this species were in accordance with biodiesel standards. This study indicated that Chaetoceros sp. FIKU035 can be considered as a suitable species for biodiesel production in outdoor cultivation.     

Comparison of <Emphasis Type="Italic">Chlorella vulgaris</Emphasis> and cyanobacterial biomass: cultivation in urban wastewater and methane production

Anaerobic digestion of microalgae is hampered by its complex cell wall. Against this background, cyanobacteria cell walls render this biomass as an ideal substrate for overcoming this drawback. The aim of the present study was to compare the growth of two cyanobacteria (Aphanizomenon ovalisporum and Anabaena planctonica) and a microalga (Chlorella vulgaris) in urban wastewater when varying the temperature (22, 27 and 32 °C). Cyanobacterial optimal growth for both strains was attained at 22 °C, while C. vulgaris did not show remarkable differences among temperatures. For all the microorganisms, ammonium removal was higher than phosphate. Biomass collected was subjected to anaerobic digestion. Methane yield of C. vulgaris was 184.8 mL CH₄ g COD in^?1 while with A. ovalisporum and A. planctonica the methane production was 1.2- and 1.4-fold higher. This study showed that cyanobacteria growth rates could be comparable to microalgae while presenting the additional benefit of an increased anaerobic digestibility.     

Measurement of individual cell strength of <Emphasis Type="Italic">Botryococcus braunii</Emphasis> in cell culture

Botryococcus braunii is a microalga considered for biofuel production and may require physical disruption of cells/colonies for efficient hydrocarbon extraction. In this study, the strength of individual cells of B. braunii was measured using a nanoindenter. From the load and cell size, the pressure for bursting the cell was calculated to be 56.9 MPa. This value is 2.3–10 times those of Saccharomyces cerevisiae and Chlorella vulgaris found in another research, because B. braunii has two types of cell walls with different thicknesses. The energy required to disrupt 1 g of dry B. braunii cells, estimated by load-displacement curves, is 3.19 J g^?1 which is 0.19–1.2 times higher than those of S. cerevisiae and C. vulgaris. When using a high-pressure homogenizer for disrupting B. braunii cells, the cell disruption degree increased with the treatment pressure at above 30 MPa, and 70% of cells were disrupted at 80 MPa.     

Exploiting Phosphate-Starved cells of <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. for the Treatment of Raw Sewage

Phosphate depletion is one of the favorable ways to enhance the sewage water treatment with the algae, however, detailed information is essential with respect to internal phosphate concentration and physiology of the algae. The growth rate of the phosphate-starved Scenedesmus cells was reduced drastically after 48 h. Indicating cells entered in the stationary phase of the growth cycle. Fourier Transform Infrared analysis of phosphate-starved Scenedesmus cells showed the reduction in internal phosphate concentration and an increase in carbohydrate/phosphate and carbohydrate/lipid ratio. The phosphate-starved Scenedesmus cells, with an initial cell density of, 1 × 10⁶ cells mL^?1 shows 87% phosphate and 100 % nitrogen removal in 24 h. The normal Scenedesmus cells need approximately 48 h to trim down the nutrients from wastewater up to this extent. Other microalgae, Ankistrodesmus, growth pattern was not affected due to phosphate starvation. The cells of Ankistrodesmus was able to reduce 71% phosphate and 73% nitrogen within 24 h, with an initial cell density of, 1 × 10⁶ cells mL^?1.     

Enhanced pyruvate production in <Emphasis Type="Italic">Candida glabrata</Emphasis> by overexpressing the <Emphasis Type="Italic">CgAMD1</Emphasis> gene to improve acid tolerance

Objectives

To enhance acid tolerance of Candida glabrata for pyruvate production by engineering AMP metabolism.

Results

The physiological function of AMP deaminase in AMP metabolism from C. glabrata was investigated by deleting or overexpresseing the corresponding gene, CgAMD1. At pH 4, CgAMD1 overexpression resulted in 59 and 51% increases in biomass and cell viability compared to those of wild type strain, respectively. In addition, the intracellular ATP level of strain Cgamd1Δ/CgAMD1 was down-regulated by 22%, which led to a 94% increase in pyruvate production. Further, various strengths of CgAMD1 expression cassettes were designed, thus resulting in a 59% increase in pyruvate production at pH 4. Strain Cgamd1Δ/CgAMD1 _(H) was grown in a 30 l batch bioreactor at pH 4, and pyruvate reached 46.1 g/l.

Conclusion

CgAMD1 overexpression plays an active role in improving acid tolerance and pyruvate fermentation performance of C. glabrata at pH 4.

     

<Emphasis Type="Italic">Pseudomonas</Emphasis> spp. increases root biomass and tropane alkaloid yields in transgenic hairy roots of <Emphasis Type="Italic">Datura</Emphasis> spp.

Transgenic hairy roots of Datura spp., established using strain A4 of Agrobacterium rhizogenes, are genetically stable and produce high levels of tropane alkaloids. To increase biomass and tropane alkaloid content of this plant tissue, four Pseudomonas strains, Pseudomonas fluorescens P64, P66, C7R12, and Pseudomonas putida PP01 were assayed as biotic elicitors on transgenic hairy roots of Datura stramonium, Datura tatula, and Datura innoxia. Alkaloids were extracted from dried biomass, and hyoscyamine and scopolamine were quantified using liquid chromatography-tandem mass spectrometry analysis. D. stramonium and D. innoxia biomass production was stimulated by all Pseudomonas spp. strains after a 5-d treatment. All strains of P. fluorescens increased hyoscyamine yields compared to untreated cultures after both 5 and 10 d of treatment. Hyoscyamine yields were highest in D. tatula cultures exposed to a 5-d treatment with C7R12 (16.633 + 0.456 mg g^?1 dry weight, a 431% increase) although the highest yield increases compared to the control were observed in D. stramonium cultures exposed to strains P64 (511% increase) and C7R12 (583% increase) for 10 d. D. innoxia showed the highest scopolamine yields after elicitation with P. fluorescens strains P64 for 5 d (0.653 + 0.021 mg g^?1 dry weight, a 265% increase) and P66 for 5 and 10 d (5 d, 0.754 + 0.0.031 mg g^?1 dry weight, a 321% increase; 10 d 0.634 + 0.046 mg g^?1 dry weight, a 277% increase). These results show that the Pseudomonas strains studied here can positively and significantly affect biomass and the yields of hyoscyamine and scopolamine from transgenic roots of the three Datura species.