Gamma-ray crosslinking of poly(3-hydroxyoctanoate-co-undecenoate)

The gamma-ray crosslinking of films made of poly(3-hydroxyoctanoate) containing undecenoate moieties (up to 33 mole%) were studied. X-ray diffraction, thermal analysis, dynamic mechanical analysis (DMA), solid state nuclear magnetic resonance (NMR) spectroscopy and degree of crosslinking (swelling analysis) as a function of irradiation dose were evaluated for treatments in air or in N(2) atmosphere. After uncrosslinked material was isolated by CHCl(3) extraction, solid state NMR data suggested that only a small percentage of the double bonds took part in the formation of irradiation crosslinks. Crosslinking in N(2) was more efficient than in air and a 20 kGy dose was sufficient for optimal crosslinking. The X-ray diffraction patterns of the polymer films were unaffected by moderate irradiation. The use of sodium hypochlorite to isolate poly(3-hydroxyoctanoate-co-undecenoate) samples resulted in partial chlorination of the double bonds and considerable depolymerization.     

Long lifetime of hydrogen-bonded DNA basepairs by force spectroscopy

Electron-tunneling data suggest that a noncovalently-bonded complex of three molecules, two recognition molecules that present hydrogen-bond donor and acceptor sites via a carboxamide group, and a DNA base, remains bound for seconds. This is surprising, given that imino-proton exchange rates show that basepairs in a DNA double helix open on millisecond timescales. The long lifetime of the three-molecule complex was confirmed using force spectroscopy, but measurements on DNA basepairs are required to establish a comparison with the proton-exchange data. Here, we report on a dynamic force spectroscopy study of complexes between the bases adenine and thymine (A-T, two-hydrogen bonds) and 2-aminoadenine and thymine (2AA-T, three-hydrogen bonds). Bases were tethered to an AFM probe and mica substrate via long, covalently linked polymer tethers. Data for bond-survival probability versus force and the rupture-force distributions were well fitted by the Bell model. The resulting lifetime of the complexes at zero pulling force was ~2 s for two-hydrogen bonds (A-T) and ~4 s for three-hydrogen bonds (2AA-T). Thus, DNA basepairs in an AFM pulling experiment remain bonded for long times, even without the stabilizing influence of base-stacking in a double helix. This result suggests that the pathways for opening, and perhaps the open states themselves, are very different in the AFM and proton-exchange measurements.     

Carbon-13 nuclear magnetic resonance studies on tobacco mosaic virus and its protein.

Fourier transform nuclear magnetic resonance studies on 12% 13C-enriched tobacco mosaic virus (TMV) and its rod-like protein oligomers in solution with molecular weights up to 42 X 10(6) are reported. In the virus approximately 17% of the carbons of the protein subunit have line widths of less than or equal to 300 Hz and T1 less than or equal to 1 s and are concluded to be mobile with more than one degree of freedom of internal rotation about a carbon--carbon bond. In the rodlike polymer of TMV protein at pH 5.3, 30% of the carbons are mobile, which implies rotational motions about carbon--carbon bonds and/or motions of the protein subunits within the polymer. The presence of internal mobility is supported by the observation that 20% of the carbons in the double disklike oligomer show decreasing line width upon increasing temperature; the remaining resonances have line widths which are temperature independent during the double disklike polymerization process. Since the molecular weight of TMV protein polymers increases with increasing temperature, this demonstrates that all nuclei within the double dislike oligomer are mobile. NMR and X-ray data on the double disklike polymer reveal differences with respect to internal mobility.     

Photocrosslinkable starch-based polymers for ophthalmologic drug delivery

This study focused on the development and characterization of a starch-based polymer with urethane linkages to be used as a controlled drug delivery system for biomedical applications. Starch was modified with 2-isocyanatoethyl methacrylate in order to obtain a polymer containing carbon-carbon double bonds in its structure. This modified starch was then used to produce films by UV irradiation using Irgacure 2959 (CIBA) as the photoinitiator. The modified polymer was characterized by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. The swelling capacity, in artificial lachrymal fluid (performed both at room temperature and physiological temperature), and water contact angles measurements were determined. The in vitro biodegradation in artificial lachrymal fluid supplemented with lysozyme was also studied. Scanning electronic microscopy (SEM) was used to characterize the morphology of the materials immediately after synthesis and after biodegradation. Timolol maleate and sodium flurbiprofen were immobilized by adsorption and their in vitro release profiles were followed spectroscopically.     

A facile and efficient method of enzyme immobilization on silica particles via Michael acceptor film coatings: immobilized catalase in a plug flow reactor

A novel method was developed for facile immobilization of enzymes on silica surfaces. Herein, we describe a single-step strategy for generating of reactive double bonds capable of Michael addition on the surfaces of silica particles. This method was based on reactive thin film generation on the surfaces by heating of impregnated self-curable polymer, alpha-morpholine substituted poly(vinyl methyl ketone) p(VMK). The generated double bonds were demonstrated to be an efficient way for rapid incorporation of enzymes via Michael addition. Catalase was used as model enzyme in order to test the effect of immobilization methodology by the reactive film surface through Michael addition reaction. Finally, a plug flow type immobilized enzyme reactor was employed to estimate decomposition rate of hydrogen peroxide. The highly stable enzyme reactor could operate continuously for 120 h at 30 °C with only a loss of about 36 % of its initial activity.     

Some studies of crosslinking chitosan-glutaraldehyde interaction in a homogeneous system.

Chitosan dissolved in acetic acid reacted with glutaraldehyde solution, ranging in concentration from 0.10 to 25.0 x 10(-2) mol dm3. The modified polymers were characterized by means of carbon, hydrogen and nitrogen elemental analysis, scanning electron microscopy, X-ray diffractometry, 13C nuclear magnetic resonance (NMR), infrared and Raman spectroscopies. The uptake of metallic cations in aqueous medium was checked through copper. The obtained data from 13C NMR, infrared and Raman spectroscopies evidenced the formation of an ethylenic double bond in the chitosan glutaraldehyde interaction. These data suggest that free pendant amine groups of chitosan polymer interact with the aldehydic group of the glutaraldehyde to form stable imine bonds, due to the resonance established with adjacent double ethylenic bonds. The crosslinking is formed by the nonuniform length of chains and by terminal unities. The crosslinking formation can involve two chitosan unities belonging, or not, to the same polymeric chain. The sequence of reactions was established for a chitosan:glutaraldehyde molar proportion of 1:20. The degree of crystallinity and particle size decreased as the amount of glutaraldehyde was increased in the polymer. Physical and chemical properties are not just affected for the chitosan glutaraldehyde reaction, but are also affected strongly by the dissolution of the natural chitosan.     

Hyperbranched double hydrophilic block copolymer micelles of poly(ethylene oxide) and polyglycerol for pH-responsive drug delivery

We report the synthesis of a well-defined hyperbranched double hydrophilic block copolymer of poly(ethylene oxide)-hyperbranched-polyglycerol (PEO-hb-PG) to develop an efficient drug delivery system. In specific, we demonstrate the hyperbranched PEO-hb-PG can form a self-assembled micellar structure on conjugation with the hydrophobic anticancer agent doxorubicin, which is linked to the polymer by pH-sensitive hydrazone bonds, resulting in a pH-responsive controlled release of doxorubicin. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy demonstrated successful formation of the spherical core-shell type micelles with an average size of about 200 nm. Moreover, the pH-responsive release of doxorubicin and in vitro cytotoxicity studies revealed the controlled stimuli-responsive drug delivery system desirable for enhanced efficiency. Benefiting from many desirable features of hyperbranched double hydrophilic block copolymers such as enhanced biocompatibility, increased water solubility, and drug loading efficiency as well as improved clearance of the polymer after drug release, we believe that double hydrophilic block copolymer will provide a versatile platform to develop excellent drug delivery systems for effective treatment of cancer.     

About the "double" radioprotecting mechanism of some sulfur-containing substances

The hypothesis about the double-acting mechanism of some radioprotectors during the irradiation of the DNA solutions is expressed in literature: the water radicals interception and the formation up to the irradiation of the additional intermolecular bonds "protector-DNA" (stabilization of the double helix). The realization conditions of this hypothesis were obtained by the molecular mechanics methods and the free radical mechanism appearance of the intrastrand cross-links "protector-DNA" during the irradiation of the polymer is given.     

Double bond requirement for the 5-lipoxygenase pathway

We showed previously that polyenoic fatty acids with double bonds at carbon 5,8,11 are good substrates for the 5-lipoxygenase and also can be converted to LTC and dihydroxy acids. In order to determine whether all three double bonds are necessary for the 5-lipoxygenase-leukotriene pathway we studied 5,8,14-eicosatrienoic and 5,11,14-eicosatrienoic acid. C14-labeled fatty acids were incubated with 10,000 X g supernatant of homogenate of rat basophilic leukemia (RBL-1) cells in the presence of Ca++ at 37 degrees C. 5,11,14-Eicosatrienoic acid was not converted by the 5-lipoxygenase pathway and 5,8,14-eicosatrienoic acid was mainly converted to 5-hydroxy-6,8,14-eicosatrienoic acid (5-HETE). This monohydroxy was identified by UV spectrometry (UV max 235 nm) and GC-mass spectrometry. Incubations with whole homogenate analyzed by HPLC and bioassay showed that no detectable LTC, LTD or LTE was formed. These data indicate that fatty acids which have double bonds at carbon 5 and carbon 8 are readily converted to the 5-hydroperoxide. However double bonds at carbon 5,8 and 11 are necessary for LTA biosynthesis. This study therefore extends the characterization of the double bond requirement of the 5-lipoxygenase-leukotriene pathway. The number of double bonds necessary at each step varies and increases with each step in the pathway.     

The optical activity and circular dichroic spectra of diacetylenic phospholipid polymers

Phospholipids (phosphatidylcholines) which contain a diacetylene group in a single acyl chain and within both acyl chains have been synthesized. Upon irradiation with ultraviolet light, both types of lipid crosslink via the diacetylene groups to produce coloured polymers. The colour arises form the conjugated double and triple bonds which make up the polymer backbone. These phospholipid polymers can exhibit optical activity, as shown by their circular dichroic spectra. The optical activity is thought to stem from asymmetric packing of the polydiacetylene chains, a packing of one particular screw sense being favoured by the chiral glycerol moiety of the lipid. The presence of an intrinsic membrane protein within the liposome structure affects the CD spectra of polymer produced by irradiation.     

Computer study of intramolecular ordering in octadecatriene chains with cis-double bonds

Computer simulations of isolated unperturbed hydrocarbon molecules of C18:3 with methylene-interrupted cis double bonds were carried out using the Monte Carlo method based on the continuum model. A molecule-fixed coordinate system (with the axes along the principal axes of inertia of each molecule conformation) was used. The orientation distribution functions rho and order parameters S for C-H and C-C bonds relative to the maximum molecule span axis were calculated. It was shown that the widths of functions rho (factor of bond "fluctuations") are dependent on the chemical structure and position of the segment, fluctuations increase from the centre of the chain towards the terminals, all things being equal. The orientation distributions rho of C-H bonds flanking the double bond are the most narrow, the functions rho of CH2-groups located between two double bonds are the widest. It turned out that order parameter -SCH profiles of isolated chains of C18:3 include both the positive and negative values. The parameter SCC odd-even effect in unsaturated molecules of such structure changes the sign between double bonds.     

Structural analysis by reductive cleavage with LiAlH4 of an allyl ether choline-phospholipid, archaetidylcholine, from the hyperthermophilic methanoarchaeon Methanopyrus kandleri

A choline-containing phospholipid (PL-4) in Methanopyrus kandleri cells was identified as archaetidylcholine, which has been described by Sprott et al. (1997). The PL-4 consisted of a variety of molecular species differing in hydrocarbon composition. Most of the PL-4 was acid-labile because of its allyl ether bond. The identity of PL-4 was confirmed by thin-layer chromatography followed by positive staining with Dragendorff reagent and fast-atom bombardment-mass spectrometry. A new method of LiAlH4 hydrogenolysis was developed to cleave allyl ether bonds and recover the corresponding hydrocarbons. We confirmed the validity of the LiAlH4 method in a study of the model compound synthetic unsaturated archaetidic acid (2,3-di-O-geranylgeranyl-sn-glycerol-1-phosphate). Saturated ether bonds were not cleaved by the LiAlH4 method. The hydrocarbons formed following LiAlH4 hydrogenolysis of PL-4 were identified by gas-liquid chromatography and mass spectrometry. Four kinds of hydrocarbons with one to four double bonds were detected: 47% of the hydrocarbons had four double bonds; 11% had three double bonds; 14% had two double bonds; 7% had one double bond; and 6% were saturated species. The molecular species composition of PL-4 was also estimated based on acid lability: 77% of the molecular species had two acid-labile hydrocarbons; 11% had one acid-labile and one acid-stable hydrocarbon; and 11% had two acid-stable hydrocarbons. To our knowledge, this is the first report of a specific chemical degradation method for the structural analysis of allyl ether phospholipid in archaea.     

Cell specific cytotoxicity and structure-activity relationship of lipophilic 1-B-D-arabinofuranosylcytosine (ara-C) derivatives.

Lipophilic derivatives of ara-C were developed with the aim to improve drug penetration and retention in solid tumors. Ara-C was esterified at the 5'-position with fatty acids (16-22 C-atoms, 0-3 double bonds). The derivatives were inactive in cell lines with various forms of ara-C and 2',2'-difluorodeoxycytidine (dFdC, gemcitabine) resistance, including deoxycytidine kinase (dCK) deficiency. The activity in the parent cell lines correlated negatively with chain length and positively with double bonds.     

Photocrosslinkable biodegradable responsive hydrogels as drug delivery systems

Recently, controlled release from biocompatible materials has received much attention for biomedical applications. Due to their biocompatibility and biodegradability, glucopyranosides such as dextran appear as promising polymeric materials if one is able to regulate their rheological properties and the encapsulation/release efficiency. In this work graft polymer hydrogels from dextran and N-isopropylacrylamide (NIPAAm) were prepared and characterized.Dextran molecules were modified with 2-isocyanatoethylmethacrylate (IEMA) in order to obtain a polymer with carbon double bonds. Urethane linkages resulted from the reaction between hydroxyl groups (OH) of the dextran and isocyanate groups (NCO) of the IEMA. The obtained polymer was then crosslinked by UV irradiation in the presence of the photoinitiating agent Irgacure 2959 by CIBA^®. The drug Ondansetron^® was entrapped in the final system and its release profile was determined at 25 and 37 °C.The characterization of the materials was accomplished by: ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectroscopy, elemental analysis, lower critical solution temperature (LCST) determination, swelling behaviour evaluation, determination of surface energy by contact angle measurement and drug delivery profile studies.     

Effects of various numbers and positions of cis double bonds in the sn-2 acyl chain of phosphatidylethanolamine on the chain-melting temperature

In an attempt to investigate systematically the effects of various single and multiple cis carbon-carbon double bonds in the sn-2 acyl chains of natural phospholipids on membrane properties, we have de novo synthesized unsaturated C20 fatty acids comprised of single or multiple methylene-interrupted cis double bonds. Subsequently, 15 molecular species of phosphatidylethanolamine (PE) with sn-1 C20-saturated and sn-2 C20-unsaturated acyl chains were semi-synthesized by acylation of C20-lysophosphatidylcholine with unsaturated C20 fatty acids followed by phospholipase D-catalyzed base-exchange reaction in the presence of excess ethanolamine. The gel-to-liquid crystalline phase transitions of these 15 mixed-chain PE, in excess H2O, were investigated by high resolution differential scanning calorimetry. In addition, the energy-minimized structures of these sn-1 C20-saturated/sn-2 C20-unsaturated PE were simulated by molecular mechanics calculations. It is shown that the successive introduction of cis double bonds into the sn-2 acyl chain of C(20):C(20)PE can affect the gel-to-liquid crystalline phase transition temperature, Tm, of the lipid bilayer in some characteristic ways; moreover, the effect depends critically on the position of cis double bonds in the sn-2 acyl chain. Specifically, we have constructed a novel Tm diagram for the 15 species of unsaturated PE, from which the effects of the number and the position of cis double bonds on Tm can be examined simultaneously in a simple, direct, and unifying manner. Interestingly, the characteristic Tm profiles exhibited by different series of mixed-chain PE with increasing degree of unsaturation can be interpreted in terms of structural changes associated with acyl chain unsaturation.     

Characterization of the Brassica napus extraplastidial linoleate desaturase by expression in Saccharomyces cerevisiae

The substrate specificity and regioselectivity of the Brassica napus extraplastidial linoleate desaturase (FAD3) was investigated in vivo in a heterologous expression system. A strain of the yeast Saccharomyces cerevisiae producing the plant enzyme was constructed and cultured in media containing a variety of fatty acids. The products of desaturation of these potential substrates were determined by gas chromatographic and mass spectrometric analysis of the yeast cultures. The results indicate that the enzyme has: (a) omega-3, as opposed to Delta-15 or double-bond-related regioselectivity, (b) the ability to desaturate substrates in the 16 to 22 carbon range, (c) a preference for substrates with omega-6 double bonds, but the ability to desaturate substrates with omega-6 hydroxyl groups or omega-9 or omega-5 double bonds, and (d) a relative insensitivity to double bonds proximal to the carboxyl end of the substrate.     

cis–trans isomerization of carbon double bonds in monounsaturated triacylglycerols via generation of free radicals

We investigated the heat-induced cis/trans isomerization of double bonds in monounsaturated lipids. When triolein (9-cis, 18:1) was heated around 180 °C, small amounts of isomerization products were obtained depending on the heating period. The heat-induced isomerization of triolein was considerably suppressed by the addition of different antioxidants or under nitrogen stream, and these additives simultaneously inhibited the thermal oxidation of double bonds in triolein. Therefore, an intermediate of the thermal oxidation reaction might be responsible for the heat-induced isomerization of the double bonds in triolein. The thermodynamics of the heat-induced isomerization of triolein (9-cis, 18:1) and trielaidin (9-trans, 18:1) were investigated using Arrhenius plot. The Arrhenius activation energies of cis double bonds in triolein and trans double bonds in trielaidin were 106 kJ/mol and 137 kJ/mol, respectively. The calculated internal rotational barrier heights of these double bonds were similar to those of the double bond of 2-butene radical and significantly lower than those of non-radicalized double bonds in 2-butene. These results suggest that heat-induced cis/trans isomerization of triolein and trielaidin occurs mainly through the formation of radical species, which are the intermediates produced during thermal oxidation. The activation energy difference between the two forms suggests that trans trielaidin radicals are more stable than cis triolein radicals. The high thermodynamic stability of the trans double bonds in lipid radicals would influence the population of cis and trans isomers in edible oils and contribute to slight accumulation of trans-18:1 isomers during heating or industrial processing.     

Synergistic effect of calcium stearate and photo treatment on the rate of biodegradation of low density polyethylene spent saline vials

The biodegradation of spent saline bottles, a low density polyethylene product (LDPE) by two selected Arthrobacter sp. under in vitro conditions is reported. Chemical and UV pretreatment play a vital role in enhancing the rate of biodegradation. Treated LDPE film exhibits a higher weight loss and density when compared to untreated films. Arthrobacter oxydans and Arthrobacter globiformis grew better in medium containing pretreated film than in medium containing untreated film. The decrease in density and weight loss of LDPE was also more for pretreated film when compared to untreated film indicating the affect of abiotic treatment on mechanical properties of LDPE. The decrease in the absorbance corresponding to carbonyl groups and double bonds that were generated during pretreatment suggest that some of the double bonds were cut by Arthrobacter species. Since Arthrobacter sp. are capable of degrading urea, splitting of urea group were also seen in FTIR spectrum indicating the evidence of biodegradation after microbial incubation. The results indicated that biodegradation rate could be enhanced by exposing LDPE to calcium stearate (a pro-oxidant) which acts as an initiator for the oxidation of the polymers leading to a decrease of molecular weight and formation of hydrophilic group. Therefore, the initial step for biodegradation of many inert polymers depends on a photo-oxidation of those polymers. The application in sufficient details with improved procedures utilizing recombinant microorganism with polymer degradation capacity can lead to a better plastic waste management in biomedical field. The present plastic disposal trend of waste accumulation can be minimized with this promising eco-friendly technique.     

Re-characterization of three conjugated linolenic acid isomers by GC-MS and NMR

Conjugated linolenic acids (CLN) refer to a group of octadecatrienoic acids with three conjugated double bonds. Minor positional and geometrical differences among CLN isomers make their separation and identification difficult. We have used GC-MS and NMR to study three common CLN isomers namely alpha-eleostearic acid, beta-eleostearic acid and punicic acid, finding that some signals of olefinic carbon atoms in NMR spectra were mistakenly assigned in the literature. The present study was therefore undertaken to re-characterize the location of CC double bonds and assign the chemical signals of proton and carbon atoms using (1)H NMR, (13)C NMR, (1)H-(1)H two-dimensional correlation spectra ((1)H-(1)H COSY) and (13)C-(1)H two-dimensional correlation spectra ((13)C-(1)H COSY). The geometrical structure of double bonds in these three CLN isomers was identified using homonuclear decoupling technique.     

Domain formation in model membranes studied by pulsed-field gradient-NMR: the role of lipid polyunsaturation

The effects of increased unsaturation in the sn-2 fatty acyl chain of phosphatidylcholines (PCs) on the lipid lateral diffusion have been investigated by pulsed-field gradient NMR. Macroscopically oriented bilayers containing a monosaturated PC, egg sphingomyelin, and cholesterol (CHOL) have been studied at temperatures between 0 degrees C and 60 degrees C, and the number of double bonds in the PC was one, two, four, or six. For PC bilayers, with and without the incorporation of egg sphingomyelin and CHOL, the lateral diffusion increased with increasing number of double bonds, as a consequence of the increased headgroup area caused by the unsaturation. Addition of CHOL caused a decrease in lipid diffusion due to the condensing effect of CHOL on the headgroup area. Phase separation into large domains of liquid-disordered and liquid-ordered phases were observed in the ternary systems with PCs containing four and six double bonds, as evidenced by the occurrence of two lipid diffusion coefficients. PC bilayers with one or two double bonds appear homogeneous on the length scales probed by the experiment, but the temperature dependence of the diffusion suggests that small domains may be present also in these ternary systems.