A novel acetylation of β-tubulin by San modulates microtubule polymerization via down-regulating tubulin incorporation

Dynamic instability is a critical property of microtubules (MTs). By regulating the rate of tubulin polymerization and depolymerization, cells organize the MT cytoskeleton to accommodate their specific functions. Among many processes, posttranslational modifications of tubulin are implicated in regulating MT functions. Here we report a novel tubulin acetylation catalyzed by acetyltransferase San at lysine 252 (K252) of β-tubulin. This acetylation, which is also detected in vivo, is added to soluble tubulin heterodimers but not tubulins in MTs. The acetylation-mimicking K252A/Q mutants were incorporated into the MT cytoskeleton in HeLa cells without causing any obvious MT defect. However, after cold-induced catastrophe, MT regrowth is accelerated in San-siRNA cells while the incorporation of acetylation-mimicking mutant tubulins is severely impeded. K252 of β-tubulin localizes at the interface of α-/β-tubulins and interacts with the phosphate group of the α-tubulin-bound GTP. We propose that the acetylation slows down tubulin incorporation into MTs by neutralizing the positive charge on K252 and allowing tubulin heterodimers to adopt a conformation that disfavors tubulin incorporation.     

Inhibitory factor of microtubule assembly from sea urchin egg cortex. I. Preparation and characterization

A new inhibitory factor of the microtubule (MT) assembly system was isolated from unfertilized sea urchin egg cortex. This factor not only suppressed spontaneous brain MT assembly, but also induced depolymerization of the reconstituted MTs. The factor did not suppress initial MT growth initiated by ciliary outer fiber fragments but the assembled MTs were soon depolymerized with time. The inhibitory activity was heat-stable but sensitive to trypsin or urea. The mode of the inhibition was distinct from the inhibitory effects of RNA on the MT assembly. The inhibitory factor partially purified on DEAE-Sephadex A-50 completely inhibited tubulin polymerization in a factor: tubulin ratio of 0.013.     

Self-repairing filamentous actin hydrogel with hierarchical structure

A chemically cross-linked filamentous actin (F-actin) gel consisting of globular actin (G-actin) as repeating units was prepared. The F-actin gel was cross-linked by covalent bonds, and the main chain is represented by the self-assembly of G-actin with a high-ordered hierarchical structure. The gel exhibited good mechanical performance with a storage modulus >1 kPa and undergoes reversible sol-gel transitions in response to changes in the salt concentration (chemical-induced sol-gel transition) as well as to shear strain (mechanical-induced sol-gel transition). Therefore, the gel exhibits self-repairing ability through dynamic polymerization and depolymerization across the structure hierarchies under repeated shear stress.     

Tubulin dynamics during the cytoplasmic cohesiveness cycle in artificially activated sea urchin eggs

Sedimentation studies and [³H]colchicine-binding assays have demonstrated a relationship between the cytoplasmic cohesiveness cycles and the changes in tubulin organization in Paracentrotus lividus eggs activated by 2.5 mM procaine. The same amount of tubulin (20–25 % of the total egg tubulin) is involved in these cyclic process and appears to undergo polymerization and depolymerization cycles. Electron microscopy studies reveal that the microtubules formed during these cytoplasmic cohesiveness cycles are under a particulate form which is sedimentable at low speed. Activation experiments carried out in the presence of cytochalasin B (CB) show that the increase in the cytoplasmic cohesiveness is highly reduced while tubulin polymerization and depolymerization cycles and pronuclear centration are not affected. Although tubulin or actin polymerization can be independently triggered in procaine-activated eggs, the increase in cytoplasmic cohesiveness requires the polymerization of both proteins. However, the cytoplasmic cohesiveness cycles appear to be regulated by tubulin polymerization and depolymerization cycles.     

Rearrangement of the Cytoskeleton in Triticum aestivum Cells during Cold Hardening and after Treatment with Abscisic Acid

Immunocytochemical study of the basic characteristics of the tubulin and actin cytoskeleton (total content, orientation, structure, and stability) was performed for various root zones of the seedlings of winter wheat cultivars contrasting in their freezing tolerance. Plant cold hardening (3°C, 7 days) and ABA treatment (30 M, 3 days) increased the stability of tubulin microtubules (MT), that is, reduced the depolymerizing action of oryzalin in vivo. However, the mechanisms of hardening and ABA stabilizing action on the cytoskeleton were different: low temperature enhanced spatial MT aggregation and resulted in the formation of a dense network of thick MT bundles, whereas ABA reduced the content of tubulin components and induced microfilament (MF) depolymerization. Most pronounced temperature- and ABA-induced cytoskeleton changes were observed in the differentiation zone, which indicates an important role of this root zone in plant adaptation and development of root freezing tolerance. Low temperatures reduced the hormonal effect on the structural arrangement and stability of MT and MF in wheat cultivars of high and moderate freezing tolerance but increased hormonal effects in the slightly tolerant cultivar. MF depolymerization and an increase in the proportion of stable MT are supposed to be a necessary condition for seedling growth retardation after their treatment with ABA and for seedlings at the initial phase of their adaptation to low temperature. At the final phase of cold hardening, some growth acceleration is evidently determined by the accumulation of highly labile MT and greater actin polymerization.     

The sequence of a region of bacteriophage phiX174 DNA coding for parts of genes A and B

The kinetics of microtubule assembly were investigated by monitoring changes in turbidity which result from the scattering of incident light by the polymer. These studies indicated that assembly occurred by a pathway involving a nucleation phase, followed by an elongation phase as evidenced by a lag in the polymerization kinetics, followed by a psuedo-first-order exponential increase in turbidity. Analytical ultracentrifugation of solutions polymerized to equilibrium showed that 6 S tubulin was the only species detectable in equilibrium with microtubules. Investigation of the elongation reaction in mixtures of 6 S tubulin and microtubule fragments demonstrated that: (1) the net rate of assembly was the sum of the rates of polymerization and depolymerization; (2) the rate of polymerization was proportional to the product of the microtubule number concentration and the 6 S tubulin concentration; and (3) the rate of depolymerization was proportional to the number concentration of microtubules. These results demonstrate that microtubule assembly occurs by a condensation polymerization mechanism consisting of distinct nucleation and elongation steps. Microtubules are initiated in a series of protein association reactions in a pathway that has not been fully elucidated. Elongation proceeds by the consecutive association of 6 S tubulin subunits onto the ends of existing microtubules. Similarly, depolymerization occurs by dissociation of 6 S subunits from the ends of microtubules. The rate constants measured for polymerization and depolymerization at 30 °C were 4 × 10⁶m^?1 s^?1 and 7 s^?1, respectively.     

LIM kinase 1 coordinates microtubule stability and actin polymerization in human endothelial cells

Microtubule (MT) destabilization promotes the formation of actin stress fibers and enhances the contractility of cells; however, the mechanism involved in the coordinated regulation of MTs and the actin cytoskeleton is poorly understood. LIM kinase 1 (LIMK1) regulates actin polymerization by phosphorylating the actin depolymerization factor, cofilin. Here we report that LIMK1 is also involved in the MT destabilization. In endothelial cells endogenous LIMK1 co-localizes with MTs and forms a complex with tubulin via the PDZ domain. MT destabilization induced by thrombin or nocodazole resulted in a decrease of LIMK1 colocalization with MTs. Overexpression of wild type LIMK1 resulted in MT destabilization, whereas the kinase-dead mutant of LIMK1 (KD) did not affect MT stability. Importantly, down-regulation of endogenous LIMK1 by small interference RNA resulted in abrogation of the thrombin-induced MTs destabilization and the inhibition of thrombin-induced actin polymerization. Expression of Rho kinase 2, which phosphorylates and activates LIMK1, dramatically decreases the interaction of LIMK1 with tubulin but increases its interaction with actin. Interestingly, expression of KD-LIMK1 or small interference RNA-LIMK1 prevents thrombin-induced microtubule destabilization and F-actin formation, suggesting that LIMK1 activity is required for thrombin-induced modulation of microtubule destabilization and actin polymerization. Our findings indicate that LIMK1 may coordinate microtubules and actin cytoskeleton.     

The C-termini of tubulin and the specific geometry of tubulin substrates influence the depolymerization activity of MCAK

MCAK is a Kinesin-13 that depolymerizes microtubules (MTs) and regulates MT dynamics. We used subtilisin-treated MTs (MTs lacking the C-termini of α- and β-tubulin) and alternative tubulin substrates to study which structural and geometrical features of the MT are critical for MCAK activity. We found that removal of the C-termini significantly decreased the efficiency of MCAK-induced depolymerization, which was not due to a reduction of end-specific binding. We also found that depolymerization of SMTs led to an increase in the stabilization of curved oligomeric tubulin products. Using alternative tubulin substrates with different geometries, we found that MCAK depolymerized parallel and anti-parallel tubulin sheets. However, MCAK did not depolymerize tubulin rings regardless of the presence or absence of the tubulin C-termini. We propose that localization of MCAK to the ends of MTs is independent of tubulin C-termini, that MCAK stabilizes a curved conformation at the end of the MT, and that efficient release of this complex is dependent on the presence of the C-termini of tubulin.αβ     

Visualization of the stop of microtubule depolymerization that occurs at the high-density region of microtubule-associated protein 2 (MAP2).

Individual microtubules (MTs) repeat alternating phases of polymerization and depolymerization, a process known as dynamic instability. Microtubule-associated proteins (MAPs) regulate the dynamic instability by increasing the rescue frequency. To explore the influence of MAP2 on in vitro MT dynamics, we correlated the distribution of MAP2 on individual MTs with the dynamic phase changes of the same MTs. MAP2 was modified selectively on its projection region by X-rhodamine iodoacetamide without altering the MT-binding activity. When the labeled MAP2 was added to MTs, the fluorescence was distributed along almost the entire length of individual MTs. However, the inhomogeneity of the distribution gradually became obvious due to the fluorescence bleaching, and the MTs appeared to consist of rapidly bleached portions (RBPs) and slowly bleached portions (SBPs), which were distributed randomly along the MT. By measuring the duration of fluorescence bleaching, the density of MAP2 in SBP was estimated to be approximately 2.5 times higher than the RBP. The average tubulin:MAP2 ratio in SBP was calculated to be 16. When the MT dynamics were observed by dark-field microscopy after determining the MAP2 distribution, rescues were always found to occur only at the SBPs. MTs also displayed intermittent shortening by repeated depolymerization phases separated by pause phases. In these cases, depolymerization phases stopped only at the SBPs. Not every SBP stopped depolymerization, but depolymerization always stopped at an SBP. Taken together, we suggest that there is a minimum density of MAP2 that is necessary to stop depolymerization.     

Rheological evidence of the gelation behavior of hyaluronan-gellan mixtures

It was found that solutions of calcium hyaluronate (CaHA) (0.1 to approximately 0.5 wt%) could form a gel by mixing with solutions of sodium type gellan (0.1 to approximately 0.5 wt%), although neither polymer by itself forms a gel at low concentrations (0.1 to approximately 0.5 wt% in this experiment). The rheological properties of CaHA-gellan mixtures were investigated by dynamic and steady shear measurements. Both storage shear modulus G' and loss shear modulus G' for CaHA-gellan mixtures increased with increasing time, and tended to an equilibrium value after 1 h. After reaching steady values of G' and G", the frequency dependence of G' and G' was observed. G' was always larger than G' in the accessible frequency range from 10(-2) to 10(2) rad/s. The effects of pH and calcium ions were examined. Gel formation of the mixtures was promoted by decreasing pH and adding from 0.01 to 0.1 M calcium ions, but excessive calcium ions weakened the gel.     

Binding of glycerol by microtubule protein.

When microtubules are purified by polymerization and depolymerization in a buffer containing glycerol, some glycerol becomes bound to the microtubule protein and is not removable by gel filtration or by prolonged dialysis. Both 6s tubulin and larger aggregates containing tubulin and accessory proteins bind glycerol. The 6s fraction has associated with it about 5 moles of glycerol per mole of tubulin dimer; 3 moles are exchangeable upon polymerization-depolymerization and 2 moles are not. The aggregate fraction has associated with it about 22 moles of glycerol per mole of tubulin dimer; approximately 11 moles are exchangeable and 11 moles are not.     

Microinjection of fluorescent tubulin into dividing sea urchin cells

To follow the dynamics of microtubule (MT) assembly and disassembly during mitosis in living cells, tubulin has been covalently modified with the fluorochrome 5-(4,6-dichlorotriazin-2-yl)aminofluorescein and microinjected into fertilized eggs of the sea urchin Lytechinus variegatus. The changing distribution of the fluorescent protein probe is visualized in a fluorescence microscope coupled to an image intensification video system. Cells that have been injected with fluorescent tubulin show fluorescent linear polymers that assemble very rapidly and radiate from the spindle poles, coincident with the position of the astral fibers. No fluorescent polymer is apparent in other areas of the cytoplasm. When fluorescent tubulin is injected near the completion of anaphase, little incorporation of fluorescent tubulin into polymer is apparent, suggesting that new polymerization does not occur past a critical point in anaphase. These results demonstrate that MT polymerization is very rapid in vivo and that the assembly is both temporally and spatially regulated within the injected cells. Furthermore, the microinjected tubulin is stable within the sea urchin cytoplasm for at least 1 h since it can be reutilized in successive daughter cell spindles. Control experiments indicate that the observed fluorescence is dependent on MT assembly. The fluorescence is greatly diminished upon treatment of the cells with cold or colchicine agents known to cause the depolymerization of assembled MT. In addition, cells injected with fluorescent bovine serum albumin or assembly-incompetent fluorescent tubulin do not exhibit fluorescence localized in the spindle but rather appear diffusely fluorescent throughout the cytoplasm.     

Microtubule Depolymerization by the Kinesin-8 Motor Kip3p: A Mathematical Model

Proteins from the kinesin-8 family promote microtubule (MT) depolymerization, a process thought to be important for the control of microtubule length in living cells. In addition to this MT shortening activity, kinesin 8s are motors that show plus-end directed motility on MTs. Here we describe a simple model that incorporates directional motion and destabilization of the MT plus-end by kinesin 8. Our model quantitatively reproduces the key features of length-versus-time traces for stabilized MTs in the presence of purified kinesin 8, including length-dependent depolymerization. Comparison of model predictions with experiments suggests that kinesin 8 depolymerizes processively, i.e., one motor can remove multiple tubulin dimers from a stabilized MT. Fluctuations in MT length as a function of time are related to depolymerization processivity. We have also determined the parameter regime in which the rate of MT depolymerization is length dependent: length-dependent depolymerization occurs only when MTs are sufficiently short; this crossover is sensitive to the bulk motor concentration.     

Tubulin-colchicine complex (TC) inhibits microtubule depolymerization by a capping reaction exerted preferentially at the minus end

The effects of colchicine and tubulin-colchicine complex (TC) on microtubule depolymerization were studied using the axoneme-subunit system described previously [Bergen LG, Borisy GG; J Cell Biol 84:141-150, 1980]. This system allows the independent analysis of the polymerization kinetics at both the plus and minus ends of a microtubule. Depolymerization was induced by isothermal dilution with 10 volumes of an experimental solution containing colchicine, TC, or buffer alone. Colchicine alone (5-100 microM) blocked depolymerization at the minus end, whereas depolymerization at the plus end occurred at almost control rates. A similar effect was produced by TC (0.4:1-1:1 molar ratio to free tubulin). High molar ratios of TC to tubulin (10:1) blocked depolymerization at both plus and minus ends, and intermediate molar ratios of TC:T allowed depolymerization of the plus ends but at attenuated rates. The blockage was not readily reversible; TC-affected ends neither shortened upon dilution nor grew longer upon incubation with additional tubulin. We conclude that TC at suprastoichiometric ratios to tubulin inhibits microtubule depolymerization by a capping reaction and that this effect is exerted preferentially at the minus end.     

Microtubule Simulations Provide Insight into the Molecular Mechanism Underlying Dynamic Instability

The dynamic instability of microtubules (MTs), which refers to their ability to switch between polymerization and depolymerization states, is crucial for their function. It has been proposed that the growing MT ends are protected by a “GTP cap” that consists of GTP-bound tubulin dimers. When the speed of GTP hydrolysis is faster than dimer recruitment, the loss of this GTP cap will lead the MT to undergo rapid disassembly. However, the underlying atomistic mechanistic details of the dynamic instability remains unclear. In this study, we have performed long-time atomistic molecular dynamics simulations (1 μs for each system) for MT patches as well as a short segment of a closed MT in both GTP- and GDP-bound states. Our results confirmed that MTs in the GDP state generally have weaker lateral interactions between neighboring protofilaments (PFs) and less cooperative outward bending conformational change, where the difference between bending angles of neighboring PFs tends to be larger compared with GTP ones. As a result, when the GDP state tubulin dimer is exposed at the growing MT end, these factors will be more likely to cause the MT to undergo rapid disassembly. We also compared simulation results between the special MT seam region and the remaining material and found that the lateral interactions between MT PFs at the seam region were comparatively much weaker. This finding is consistent with the experimental suggestion that the seam region tends to separate during the disassembly process of an MT.     

Reorganization of the tubulin and actin cytoskeleton under acclimation and abscisic acid treatment of Triticum aestivum L. plants

Only scanty and contradictory data are available concerning effects of low temperatures and ABA on the structural organization of microtubules (MTs) and microfilaments (MFs), and no information exists on the interaction of these parameters at cold acclimation of plants. Therefore, in cold acclimate and ABA-treated winter wheat plants, a comparative study was made of the state (localization, orientation, structure) and stability of actin and tubulin cytoskeleton in root cells taken from different zones, using indirect immunofluorescent microscope. The plant cold acclimation caused MT aggregation, the rise of MT and MF fluorescence, and the increase of their stability (a decrease of oryzalin effect) mainly in the root differentiation zone, that may testify to the strengthening of contacts between MTs and MFs. Like the cold acclimation, ABA induced the formation of MT bunches only in meristem and elongation zone cells. However in the zone of differentiation, the hormone stimulated the increase of tubulin structure stability, well correlating with a decrease in MT content, aggregation degree, and immunofluorescence, and, in addition with a complete depolymerization of MFs. Low temperatures removed the hormone effect on the structural organization of tubulin and actin cytoskeleton in the zone of differentiation. It is suggested that MT destruction, the decrease of instable MT populations, and the increase of stable MT populations may slow down growth processes in ABA-treated plants, similarly as in seedlings being on the initial stages of cold acclimation. By the end of this process, the induction of plant growth is determined evidently by the increase in the number of instable, highly labile MT populations, and in the status of MF polymerization.     

Reduction in Microtubule Dynamics In Vitro by Brain Microtubule-Associated Proteins and by a Microtubule-Associated Protein-2 Second Repeated Sequence Analogue

Abstract: Microtubule-associated protein (MAP) binding to assembled microtubules (MTs) can be reduced by the addition of polyglutamate without significant MT depolymerization or interference with MT elongation reactions. Ensuing polymer length redistribution in MAP-depleted MTs occurs on a time scale characteristic of that observed with MAP-free MTs. The redistribution phase occurs even in the absence of mechanical shearing and without appreciable effects from end-to-end annealing, as indicated by the time course of incremental changes in polymer length and MT number concentration. We also observed higher rates of MT length redistribution when the [MAP]/[tubulin] ratio was decreased. Together, these results demonstrate that MT length redistribution rates are greatly influenced by MAP content, and the data are compatible with the dynamic instability model. We also found that a peptide analogue corresponding to the second repeated sequence in the MT-binding region of MAP-2 can also markedly retard MT length redistribution kinetics, a finding that accords with the ability of this peptide to promote tubulin polymerization in the absence of MAPs and to displace MAP-2 from MTs. These results provide further evidence that MAPs can modulate MT assembly/disassembly dynamics and that peptide analogues can mimic the action of intact MAPs without the need for three contiguous repeated sequences in the MT-binding region.     

Direct Regulation of Microtubule Dynamics by KIF17 Motor and Tail Domains

KIF17 is a kinesin-2 family motor that interacts with EB1 at microtubule (MT) plus-ends and contributes to MT stabilization in epithelial cells. The mechanism by which KIF17 affects MTs and how its activity is regulated are not yet known. Here, we show that EB1 and the KIF17 autoinhibitory tail domain (KIF17-Tail) interacted competitively with the KIF17 catalytic motor domain (K370). Both EB1 and KIF17-Tail decreased the K_0.5MT of K370, with opposing effects on MT-stimulated ATPase activity. Importantly, K370 had independent effects on MT dynamic instability, resulting in formation of long MTs without affecting polymerization rate or total polymer mass. K370 also inhibited MT depolymerization induced by dilution in vitro and by nocodazole in cells, suggesting that it acts by protecting MT plus-ends. Interestingly, KIF17-Tail bound MTs and tubulin dimers, delaying initial MT polymerization in vitro and MT regrowth in cells. However, neither EB1 nor KIF17-Tail affected K370-mediated MT polymerization or stabilization significantly in vitro, and EB1 was dispensable for MT stabilization by K370 in cells. Thus, although EB1 and KIF17-Tail may coordinate KIF17 catalytic activity, our data reveal a novel and direct role for KIF17 in regulating MT dynamics.     

The Drosophila Kinesin-13, KLP59D,Impacts Pacman- and Flux-based Chromosome Movement

Chromosome movements are linked to the active depolymerization of spindle microtubule (MT) ends. Here we identify the kinesin-13 family member, KLP59D, as a novel and uniquely important regulator of spindle MT dynamics and chromosome motility in Drosophila somatic cells. During prometaphase and metaphase, depletion of KLP59D, which targets to centrosomes and outer kinetochores, suppresses the depolymerization of spindle pole–associated MT minus ends, thereby inhibiting poleward tubulin Flux. Subsequently, during anaphase, loss of KLP59D strongly attenuates chromatid-to-pole motion by suppressing the depolymerization of both minus and plus ends of kinetochore-associated MTs. The mechanism of KLP59D''s impact on spindle MT plus and minus ends appears to differ. Our data support a model in which KLP59D directly depolymerizes kinetochore-associated plus ends during anaphase, but influences minus ends indirectly by localizing the pole-associated MT depolymerase KLP10A. Finally, electron microscopy indicates that, unlike the other Drosophila kinesin-13s, KLP59D is largely incapable of oligomerizing into MT-associated rings in vitro, suggesting that such structures are not a requisite feature of kinetochore-based MT disassembly and chromosome movements.     

Properties of the kinetochore in vitro. II. Microtubule capture and ATP- dependent translocation

We have studied the interaction of preformed microtubules (MTs) with the kinetochores of isolated chromosomes. This reaction, which we call MT capture, results in MTs becoming tightly bound to the kinetochore, with their ends capped against depolymerization. These observations, combined with MT dynamic instability, suggest a model for spindle morphogenesis. In addition, ATP appears to mobilize dynamic processes at captured MT ends. We used biotin-labeled MT seeds to follow assembly dynamics at the kinetochore. In the presence of ATP and unlabeled tubulin, labeled MT segments translocate away from the kinetochore by polymerization of subunits at the attached end. We have termed this reaction proximal assembly. Further studies demonstrated that translocation could be uncoupled from MT assembly. We suggest that the kinetochore contains an ATPase activity that walks along the MT lattice toward the plus end. This activity may be responsible for the movement of chromosomes away from the pole in prometaphase.