Production of a Novel Compound, 7,10,12-Trihydroxy-8(E)-Octadecenoic Acid from Ricinoleic Acid by Pseudomonas aeruginosa PR3

The production and its potential use of a novel trihydroxy unsaturated fatty acid, 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD), were investigated. TOD was formed by Pseudomonas aeruginosa PR3 (NRRL B-18602) in a culture supplied with exogenous ricinoleic acid. The yield of TOD production was always higher in a rich culture medium than in minimal screening medium. Extending the conversion time from 48 to 72 h prior to lipid extraction led to a 65% reduction in yield, indicating that TOD was further metabolized by strain PR3 and that control of reaction time is important to achieving a maximum yield. The optimum culture density, reaction time, pH, temperature, and substrate concentration for the production of TOD were: 20–24 h culture growth, 48 h, 7.0, 25°C, and 1% (vol/vol), respectively. Under optimum conditions, the yield of TOD production was greater than 45%. TOD was found to be an antifungal agent most active against the fungus that causes blast disease in rice plants, the most important fungal disease affecting rice production worldwide. Received: 4 January 2001/Accepted: 6 February 2001     

Production and identification of a novel compound, 7,10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-hexadecenoic acid from palmitoleic acid by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Hydroxy fatty acids are considered as important value-added product for industrial application because of their special properties such as higher viscosity and reactivity. Microbial production of the hydroxy fatty acids from various fatty acid substrates have been actively studied using several microorganisms. The new bacterial isolate Pseudomonas aeruginosa (PR3) had been reported to produce mono-, di-, and tri-hydroxy fatty acids from different unsaturated fatty acids. Of those, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) and 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD) were produced from oleic acid and ricinoleic acid, respectively. Based on the postulated common metabolic pathway involved in DOD and TOD formation by PR3, it was assumed that palmitoleic acid containing a singular 9-cis double bond, common structural property sharing with oleic acid and ricinoleic acid, could be utilized by PR3 to produce hydroxy fatty acid. In this study, we tried to use palmitoleic acid as substrate for production of hydroxy fatty acid by PR3 and firstly confirmed that PR3 could produce 7,10-dihydroxy-8(E)-hexadecenoic acid (DHD) with 23% yield from palmitoleic acid. DHD production was peaked at 72 h after the substrate was added to the 24-h-culture.     

Factors Influencing the Production of a Novel Compound, 7,10-Dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic Acid,by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3 (NRRL B-18602) in Batch Cultures

Pseudomonas aeruginosa PR3 (NRRL B-18602) converts oleic acid to a novel compound, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD). Parameters that included medium volume, cell growth time, gyration speed, pH, substrate concentration, and dissolved oxygen concentration were evaluated for a scale-up production of DOD in batch cultures using Fernbach flasks and a bench-top bioreactor. Maximum production of about 2 g DOD (38% yield) was attained in Fernbach flasks containing 500 ml medium when cells were grown at 28°C and 300 rpm for 16–20 h and the culture was adjusted to pH 7 prior to substrate addition. Increases of medium volume and substrate concentration failed to enhance yield. When batch cultures were initially conducted in a reactor, excessive foaming occurred that made the bioconversion process inoperable. This was overcome by a new aeration mechanism that provided adequate dissolved oxygen to the fermentation culture. Under the optimal conditions of 650 rpm, 28°C, and 40–60% dissolved oxygen concentration, DOD production reached about 40 g (40% yield) in 4.5 L culture medium using a 7-L reactor vessel. This is the first report on a successful scale-up production of DOD. Received: 26 September 2002 / Accepted: 24 October 2002     

Production of 10-Hydroxy-8(E)-Octadecenoic Acid from Oleic Acid Conversion by Strains of Pseudomonas aeruginosa

Eighteen Pseudomonas aeruginosa strains were examined for their ability to convert oleic acid to produce 10-hydroxy-8(E)-octadecenoic acid (HOD), which was structurally confirmed by GC-MS, NMR, and FTIR. There were no substantial amounts of other new compounds found in the fermentation broths in addition to HOD and 7,10-dihydroxy-8(E)-octadecenoic acid (DOD). The results demonstrated that P. aeruginosa strains possessed varying levels of activity for producing HOD. Under the experimental conditions, strain NRRL B-14938 isolated from sheep manure was the best HOD producer exhibiting the highest HOD to DOD product ratio in the medium most suitable for purifying HOD. Using strain B-14938 as a model system for further characterization, optimum conditions for producing HOD were found to be at 26°C and pH 7.0 after 60 h of reaction time using a medium containing EDTA as a chelating agent. This study has identified a high-yielding P. aeruginosa strain and provided the reaction characteristics needed to develop a scale-up production process of HOD for testing its properties and potential new uses.     

A facile reactor process for producing 7,10-dihydroxy-8(E)-octadecenoic acid from oleic acid conversion by Pseudomonas aeruginosa

Pseudomonas aeruginosa strain PR3 (NRRL B-18602) converts oleic acid to a novel compound, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD). The bioconversion was scaled up in a 7-l bench-top, stirred-batch reactor to produce DOD for testing of potential industrial uses. Aeration was supplied continuously from the top through two ports on the headplate and periodically through a bottom sparger, in conjunction with the use of marine impellers for agitation. This unique aeration arrangement maintained the dissolved O₂ concentration in the 40–60% range during the period of maximal bioconversion and it also avoided excessive medium foaming during the reaction. Furthermore, the level of dissolved O₂ in the first 24 h of reaction played an important role in the initial rate of DOD production. DOD production reached a plateau after 72 h with a yield up to 100 g (or 50% recovery) from a total of 9 l medium from two reactors run simultaneously. The final culture broth was processed using newly adapted procedures in the pilot plant that included crystallization of DOD from ethyl acetate solution at –15°C. The newly developed bioprocess will serve as a platform for the scale-up production of other value-added products derived from vegetable oils and their component fatty acids.     

Production of 10,12-dihydroxy-8(E)-octadecenoic acid, an intermediate in the conversion of ricinoleic acid to 7,10,12-trihydroxy-8(E)-octadecenoic acid by Pseudomonas aeruginosa PR3

A bacterial isolate, Pseudomonas aeruginosa (PR3), has been reported to produce a new compound, 7,10,12-trihydroxy-8(E)-octadecenoic acid (TOD), from ricinoleic acid (Kuo TM, LK Manthey and CT Hou. 1998. J Am Oil Chem Soc 75: 875–879). The reaction is unique in that it involves an introduction of two additional hydroxyl groups at carbon 7 and 10 and a rearrangement of the double bond from carbon 9–10 (cis) to 8–9 (trans). In an effort to elucidate the metabolic pathway involved in the formation of TOD from ricinoleic acid by PR3, we have isolated another compound from the reaction mixture using HPLC. The structure of the new compound was determined to be 10, 12-dihydroxy-8(E)-octadecenoic acid (DHOD) by GC/MS, FTIR, and NMR. The structural similarity between DHOD and TOD and the results from the time course study of the above two compounds strongly suggested that DHOD was an intermediate in the bioconversion of ricinoleic acid to TOD by PR3. The optimum pH and temperature for the production of DHOD from ricinoleic acid by PR3 was 6.5 and 25°C, respectively. This is the first report on the production of 10,12-dihydroxy-8(E)-octadecenoic acid from ricinoleic acid by PR3. Journal of Industrial Microbiology & Biotechnology (2000) 24, 167–172. Received 28 July 1999/ Accepted in revised form 18 November 1999     

Production of a value-added hydroxy fatty acid, 7,10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic acid,from high oleic safflower Oil by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Hydroxy fatty acids (HFAs), originally obtained in small amounts from plant systems, are good examples of structurally modified lipids, and they render special properties such as higher viscosity and reactivity compared to normal fatty acids. Based on these properties, HFAs possess high industrial potential in a wide range of applications. Recently, various microbial strains were tested for the production of HFAs from different unsaturated fatty acids since HFA production is limited to plant systems. Among the microbial strains tested, Pseudomonas aeruginosa PR3 has been well studied for the production of 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) from oleic acid. Previously, we reported that strain PR3 could utilize triolein instead of oleic acid as a substrate for the production of DOD (Appl. Microbiol. Biotechnol. 2007, 74: 301–306). In this study, we focused on utilization of vegetable oil as a substrate for DOD production by PR3. Consequently, strain PR3 efficiently utilized high oleic safflower oil as a substrate for DOD production. Optimal initial medium pH and incubation time were pH 8.0 and 72 h, respectively. Optimal carbon and nitrogen sources were fructose and glutamine, respectively. Results from this study demonstrate that normal vegetable oils could be used as efficient substrates for the production of value-added HFAs by microbial bioconversion.     

Identification of a Staphylococcus warneri Species That Converts Oleic Acid to 10-Ketostearic Acid

10-Ketostearic acid was unexpectedly observed during bioconversion of oleic acid to 15-, 16-, and 17-octadecenoic acids by Bacillus pumilus. The unexpected conversion was caused by contaminants which were isolated, characterized, and identified. The three isolates were Gram-positive cocci that grew anaerobically and were sensitive to furazolidone and lysostaphin. These characteristics suggested that the isolates belonged to the genus Staphylococcus. Physiological and biochemical characterization, fatty acid profiling, and DNA reassociation determinations indicated that the isolates were strains of the species Staphylococcus warneri. The organisms were deposited in ARS Culture Collection as NRRL B-14932, NRRL B-14933, and NRRL B-14934.     

Factors influencing the production of a novel compound, 7,10-dihydroxy-8(E)-octadecenoic acid, by Pseudomonas aeruginosa PR3 (NRRL B-18602) in batch cultures

Pseudomonas aeruginosa PR3 (NRRL B-18602) converts oleic acid to a novel compound, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD). Parameters that included medium volume, cell growth time, gyration speed, pH, substrate concentration, and dissolved oxygen concentration were evaluated for a scale-up production of DOD in batch cultures using Fernbach flasks and a bench-top bioreactor. Maximum production of about 2 g DOD (38% yield) was attained in Fernbach flasks containing 500 ml medium when cells were grown at 28 degrees C and 300 rpm for 16-20 h and the culture was adjusted to pH 7 prior to substrate addition. Increases of medium volume and substrate concentration failed to enhance yield. When batch cultures were initially conducted in a reactor, excessive foaming occurred that made the bioconversion process inoperable. This was overcome by a new aeration mechanism that provided adequate dissolved oxygen to the fermentation culture. Under the optimal conditions of 650 rpm, 28 degrees C, and 40-60% dissolved oxygen concentration, DOD production reached about 40 g (40% yield) in 4.5 L culture medium using a 7-L reactor vessel. This is the first report on a successful scale-up production of DOD.     

Production of 7,10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic acid from olive oil by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Microbial modification of naturally occurring materials is one of the efficient ways to add new values to them. Hydroxylation of free unsaturated fatty acids by microorganism is a good example of those modifications. Among microbial strains studied for that purpose, a new bacterial isolate Pseudomonas aeruginosa PR3 has been well studied to produce several hydroxy fatty acids from different unsaturated fatty acids. Of those hydroxy fatty acids, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) was efficiently produced from oleic acid by strain PR3. However, it was highly plausible to use vegetable oil containing oleic acid rather than free oleic acid as a substrate for DOD production by strain PR3. In this study, we firstly tried to use olive oil containing high content of oleic acid as a substrate for DOD production. DOD production from olive oil was confirmed by structural determination with GC, TLC, and GC/MS analysis. DOD production yield from olive oil was 53.5%. Several important environmental factors were also tested. Galactose and glutamine were optimal carbon and nitrogen sources, and magnesium ion was critically required for DOD production from olive oil. Results from this study demonstrated that natural vegetable oils containing oleic acid could be used as efficient substrate for the production of DOD by strain PR3.     

Conversion of Unsaturated Fatty Acids by Bacteria Isolated from Compost

A compost mixture amended with soybean oil was enriched in microorganisms that transformed unsaturated fatty acids (UFAs). When oleic acid or 10-ketostearic acid was the selective fatty acid, Sphingobacterium thalpophilum (NRRL B-23206, NRRL B-23208, NRRL B-23209, NRRL B-23210, NRRL B-23211, NRRL B-23212), Acinetobacter spp. (NRRL B-23207, NRRL B-23213), and Enterobacter cloacae (NRRL B-23264, NRRL B-23265, NRRL B-23266) represented isolates that produced either hydroxystearic acid, ketostearic acid, or incomplete decarboxylations. When ricinoleic (12-hydroxy-9-octadecenoic) acid was the selective UFA, Enterobacter cloacae (NRRL B-23257, NRRL B-23267) and Escherichia sp. (NRRL B-23259) produced 12-C and 14-C homologous compounds, and Pseudomonas aeruginosa (NRRL B-23256, NRRL B-23260) converted ricinoleate to a trihydroxyoctadecenoate product. Also, various Enterobacter, Pseudomonas, and Serratia spp. appeared to decarboxylate linoleate substrate incompletely. These saprophytic, compost bacteria were aerobic or facultative anaerobic Gram-negative and decomposed UFAs through decarboxylation, hydroxylation, and hydroperoxidation mechanisms. Received: 3 November 1998 / Accepted: 30 November 1998     

Production of 7, 10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic acid from triolein via lipase induction by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Hydroxy fatty acids (HFA) have gained importance because of their special properties such as higher viscosity and reactivity compared with other non-hydroxy fatty acids. The bacterial isolate Pseudomonas aeruginosa (PR3) was reported to produce mono-, di-, and trihydroxy fatty acids from different unsaturated fatty acids. Of those, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) was produced with high yield from oleic acid by PR3. Up to now, the substrates used for microbial HFA production were free fatty acids. However, it is possible to utilize triacylglycerides, specifically triolein containing three oleic groups, as a substrate by microbial enzyme system involved in HFA production from oleic acid. In this study we used triolein as a substrate and firstly report that triolein could be efficiently utilized by PR3 to produce DOD. Triolein was first hydrolyzed into oleic acid by the triolein-induced lipase and then the released oleic acid was converted to DOD by PR3. Results from this study demonstrated that natural vegetable oils, without being intentionally hydrolyzed, could be used as efficient substrates for the microbial production of value-added hydroxy fatty acids.     

Production of isomeric 9,10,13 (9,12,13)-trihydroxy-11E (10E)-octadecenoic acid from linoleic acid by Pseudomonas aeruginosa PR3

Trihydroxy unsaturated fatty acids with 18 carbons have been reported as plant self-defense substances. Their production in nature is rare and is found mainly in plant systems. Previously, we reported that a new bacterial isolate, Pseudomonas aeruginosa PR3, converted oleic acid and ricinoleic acid to 7,10-dihydroxy-8(E)-octadecenoic acid and 7,10,12-trihydroxy-8(E)-octadecenoic acid, respectively. Here we report that strain PR3 converted linoleic acid to two compounds: 9,10,13-trihydroxy-11(E)-octadecenoic acid (9,10,13-THOD) and 9,12,13-trihydroxy-10(E)-octadecenoic acid (9,12,13-THOD). Stereochemical analyses showed the presence of 16 different diastereomers — the maximum number possible. The optimum reaction temperature and pH for THOD production were 30°C and 7.0, respectively. The optimum linoleic acid concentration was 10 mg/ml. The most effective single carbon and nitrogen sources were glucose and sodium glutamate, respectively. However, when a mixture of yeast extract (0.05%), (NH₄)₂HPO₄ (0.2%), and NH₄NO₃ (0.1%) was used as the nitrogen source, THOD production was higher by 8.3% than when sodium glutamate was the nitrogen source. Maximum production of total THOD with 44% conversion of substrate was achieved at 72 h of incubation, after which THOD production plateaued up to 240 h. THOD production and cell growth increased in parallel with glucose concentration up to 0.3%, after which cell growth reached its maximum and THOD production did not increase. These results suggested that THODs were not metabolized by strain PR3. This is the first report of microbial production of 9,10,13- and 9,12,13-THOD from linoleic acid. Journal of Industrial Microbiology & Biotechnology (2000) 25, 109–115. Received 18 March 2000/ Accepted in revised form 09 June 2000     

Identification of NRRL strain B-18602 (PR3) as Pseudomonas aeruginosa and effect of phenazine 1-carboxylic acid formation on 7,10-dihydroxy-8(E)-octadecenoic acid accumulation

A new compound, 7,10-dihydroxy-8(E)-octadecenoic acid (DOD), produced from oleic acid by a new bacterial isolate PR3, was discovered in 1991. We have now identified isolate PR3 as a strain of Pseudomonas aeruginosa by DNA reassociation studies. Strain PR3 also produced a crystalline yellowish compound the structure of which, as determined by GC/MS and NMR, is phenazine 1-carboxylic acid (PCA). In cultures of PR3, high PCA production was associated with low DOD accumulation.The mention of firm names or trade products does not imply that they are endorsed or recommended by the US Department of Agriculture over other firms or similar products not mentioned.     

Environmental optimization for bioconversion of triolein into 7,10-dihydroxy-8(<Emphasis Type="Italic">E</Emphasis>)-octadecenoic acid by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> PR3

Hydroxy fatty acids (HFAs), originally found in small amount mainly from plant systems, are well known to have special properties such as higher viscosity and reactivity compared with other normal fatty acids. Recently, various microbial strains were tested to produce HFAs from different unsaturated fatty acids. Among those microbial strains tested, Pseudomonas aeruginosa PR3 are well known to utilize various unsaturated fatty acids to produce mono-, di-, and tri-HFAs. Previously, we reported that strain PR3 could utilize triolein as a substrate for the production of 7,10-dihydroxy-8(E)-octadecenoic acid (DOD) via the induction of lipase activity (Chang et al., Appl Microbiol Biotechnol, 74:301–306, 2007). In this study, we focused on the development of the optimal environmental conditions for DOD production from triolein by PR3. Optimal initial medium pH and incubation temperature were pH 8.0 and 25°C, respectively. Magnesium ion was essentially required for DOD production. Optimal inoculum size, time for substrate addition, and substrate concentration were 1%, 12 to 24 h, and 300 mg, respectively.     

Oleic acid transformations by selected strains of Sphingobacterium thalpophilum and Bacillus cereus from composted manure

In a survey of 186 randomly selected microbial strains isolated from composted manure, 63 transformed oleic acid into three types of products: hydroxy fatty acid, fatty amide, and less polar oleyl lipid. Selection of oleic acid-transforming microorganisms was enhanced in nutrient agar supplemented with 0.1% (vol/vol) oleic acid at pH 7.2. Most of the 63 diverse isolates elicited inconsistent and poorly reproduced transformations. However, strains 142b (NRRL B-14797) transformed oleic acid to 10-hydroxystearic acid consistently, and strain 229b (NRRL B-14812) produced an octadecenamide. Taxonomic studies indicated that NRRL strain B-14797, possessing 1,3-dihydroxy-2-amino-15-methylhexadecane and sphinganine bases, was closely related to Sphingobacterium thalpophilum, and NRRL B-14812 was identified as Bacillus cereus.     

Production of 10-Ketostearic Acid and 10-Hydroxystearic Acid by Strains of Sphingobacterium thalpophilum Isolated from Composted Manure

Six strains of Sphingobacterium thalpophilum were isolated from a compost mixture enriched with oleic acid. These strains converted oleic acid to 10-ketostearic acid (10-KSA; 87–94% of the total conversion product) and to 10-hydroxystearic acid (10-HSA; 6–13%) exhibiting three levels of total product yields. The predominant production of 10-KSA by these new S. thalpophilum isolates is in contrast to strain 142b (NRRL B-14797) previously isolated from a commercial compost, which produces exclusively 10-HSA. The production yield of greater than 75% 10-KSA was achieved in 36 h, acting on 0.26 g of oleic acid in 30-ml fermentation broth incubated with agitation at 28°C. For easy maintenance, fast-growth, and high bioreactivity, these S. thalpophilum strains are suited for developing a large-scale production of 10-KSA and 10-HSA. Received: 20 July 1999 / Accepted: 20 August 1999     

Conversion of fatty acids by Bacillus sphaericus-like organisms

Bacillus sphaericus species are mesophilic round-spored organisms that readily utilize fatty acid-based surfactants during growth, but their ability to modify fatty acids is unknown. Among 57 B. sphaericus-like strains tested for fatty acid transformation activity in Wallen fermentation (WF) medium, ten converted oleic acid to a new product determined by gas chromatography – mass spectrometry (GC-MS) to be 10-ketostearic acid (10-KSA). Additionally, a few other strains converted ricinoleic acid and linoleic acid to new products that remain to be characterized. Unlike most microbial hydrations of oleic acid, which produce a mixture of 10-KSA and 10-hydroxystearic acid, the conversion of oleic acid by B. sphaericus strains was unique in that 10-KSA was the sole reaction product. By replacing dextrose with sodium pyruvate in WF and adjusting to pH 6.5, conversion of oleic acid to 10-KSA by strain NRRL NRS-732 was improved from about 11% to more than 60%. Using the defined optimal conditions, the conversion reaction was scaled up in a stirred-batch reactor by using technical-grade oleic acid as substrate. This is the first report on the characterization of fatty acid conversions by B. sphaericus species. Received: 17 December 2001 / Accepted: 17 January 2002     

Hydration of linoleic acid by bacteria isolated from ruminants

Two strains of Enterococcus faecalis isolated from the ovine rumen and known to hydrate oleic acid were shown to transform linoleic acid by hydration into two products. The products, identified as 10-hydroxy-12-octadecenoic acid and 13-hydroxy-9-octadecenoic acid, were formed during stationary phase in yields of 13% and 6% respectively. Yields increased to 22% and 14% when culture conditions were optimised. To our knowledge, this is the first report of 13-hydroxy-9-octadecenoic acid production by bacteria. During a search for further linoleic-acid-hydrating bacteria, a strain of Streptococcus bovis isolated from bovine faeces and the ruminal strain S. bovis JB1 were found to hydrate linoleic acid. Both strains formed only one product and the most rapid appearance occurred during exponential growth. The S. bovis product, identified as 13-hydroxy-9-octadecenoic acid, formed in a yield of 28%. This study provides the first information on linoleic acid hydration by ruminal bacteria.     

Oleyl Oleate and Homologous Wax Esters Synthesized Coordinately from Oleic Acid by Acinetobacter and Coryneform Strains

Newly isolated Acinetobacter (NRRL B-14920, B-14921, B-14923) and coryneform (NRRL B-14922) strains accumulated oleyl oleate and homologous liquid wax esters (C_30:2–C_36:2) in culture broths. Diunsaturated oleyl oleate preponderated in 75 mg liquid wax esters (280 mg lipid extract) recovered from 100-ml cultures of Acinetobacter B-14920 supplemented with 810 mg oleic acid–oleyl alcohol. With soybean oil instead of oleic acid, wax esters (260 mg) were increased to approximately 50% of the lipid extract. Production of wax esters by cultures supplemented with combined fatty (C₈–C₁₈) alcohols and acids suggests a coordinated synthesis whereby the exogenous alcohol remains unaltered, and the fatty acid is partially oxidized with removal of C₂ units before esterification. Consequently, C₈–C₁₈ primary alcohols control chain lengths of the wax esters. Exogenous fatty acids are presumed to enter an intracellular oxidation pool from which is produced a homologous series of liquid wax esters.