A fluorimetric method for the determination of pepsin activity

An intramolecularly quenched fluorogenic peptide containing o-aminobenzoyl (Abz) and ethylenediamine 2,4-dinitrophenyl (Eddnp) groups at amino- and carboxyl-terminal amino acid residues, Abz-Lys-Pro-Ile-Glu-Phe-Phe-Arg-Leu-Eddnp, was hydrolyzed by purified human pepsin, gastricsin, and gastric juice uniquely at the Phe-Phe bond. Kinetic parameters determined for purified pepsin were K(m)=0.68+/-0.11 microM; k(cat)=6.3+/-0.16s(-1); k(cat)/K(m)=9.26s(-1) microM(-1); Gastricsin showed K(m)=2.69+/-0.18 microM; k(cat)=0.03+/-0.005s(-1); k(cat)/K(m)=0.011s(-1) microM(-1). Gastric juice (21 samples) from subjects without gastric disorders at endoscopy examination showed activities varying from 0.0008 to 9.72 micromolml(-1)min(-1). Pepstatin A inhibition of gastric juice enzymatic activity was complete at 3.4x10(-5)M (final concentration) inhibitor. In the proposed method the presence of a unique scissile bond in the synthetic substrate provides a direct ratio between enzymatic activity and amount of substrate hydrolyzed, and a unique step reaction facilitates the use of this assay for the determination of the activity of aspartic proteinases in biological fluids and during enzyme purification procedures.     

Cloning and characterization of histamine dehydrogenase from Nocardioides simplex

Histamine dehydrogenase (NSHADH) can be isolated from cultures of Nocardioides simplex grown with histamine as the sole nitrogen source. A previous report suggested that NSHADH might contain the quinone cofactor tryptophan tryptophyl quinone (TTQ). Here, the hdh gene encoding NSHADH is cloned from the genomic DNA of N. simplex, and the isolated enzyme is subjected to a full spectroscopic characterization. Protein sequence alignment shows NSHADH to be related to trimethylamine dehydrogenase (TMADH: EC 1.5.99.7), where the latter contains a bacterial ferredoxin-type [4Fe-4S] cluster and 6-S-cysteinyl FMN cofactor. NSHADH has no sequence similarity to any TTQ containing amine dehydrogenases. NSHADH contains 3.6+/-0.3 mol Fe and 3.7+/-0.2 mol acid labile S per subunit. A comparison of the UV/vis spectra of NSHADH and TMADH shows significant similarity. The EPR spectrum of histamine reduced NSHADH also supports the presence of the flavin and [4Fe-4S] cofactors. Importantly, we show that NSHADH has a narrow substrate specificity, oxidizing only histamine (K(m)=31+/-11 microM, k(cat)/K(m)=2.1 (+/-0.4)x10(5)M(-1)s(-1)), agmatine (K(m)=37+/-6 microM, k(cat)/K(m)=6.0 (+/-0.6)x10(4)M(-1)s(-1)), and putrescine (K(m)=1280+/-240 microM, k(cat)/K(m)=1500+/-200 M(-1)s(-1)). A kinetic characterization of the oxidative deamination of histamine by NSHADH is presented that includes the pH dependence of k(cat)/K(m) (histamine) and the measurement of a substrate deuterium isotope effect, (D)(k(cat)/K(m) (histamine))=7.0+/-1.8 at pH 8.5. k(cat) is also pH dependent and has a reduced substrate deuterium isotope of (D)(k(cat))=1.3+/-0.2.     

Catalytic reaction pathway for the mitogen-activated protein kinase ERK2

The structural, functional, and regulatory properties of the mitogen-activated protein kinases (MAP kinases) have long attracted considerable attention owing to the critical role that these enzymes play in signal transduction. While several MAP kinase X-ray crystal structures currently exist, there is by comparison little mechanistic information available to correlate the structural data with the known biochemical properties of these molecules. We have employed steady-state kinetic and solvent viscosometric techniques to characterize the catalytic reaction pathway of the MAP kinase ERK2 with respect to the phosphorylation of a protein substrate, myelin basic protein (MBP), and a synthetic peptide substrate, ERKtide. A minor viscosity effect on k(cat) with respect to the phosphorylation of MBP was observed (k(cat) = 10 +/- 2 s(-1), k(cat)(eta) = 0.18 +/- 0.05), indicating that substrate processing occurs via slow phosphoryl group transfer (12 +/- 4 s(-1)) followed by the faster release of products (56 +/- 4 s(-1)). At an MBP concentration extrapolated to infinity, no significant viscosity effect on k(cat)/K(m(ATP)) was observed (k(cat)/K(m(ATP)) = 0.2 +/- 0.1 microM(-1) s(-1), k(cat)/K(m(ATP))(eta) = -0.08 +/- 0.04), consistent with rapid-equilibrium binding of the nucleotide. In contrast, at saturating ATP, a full viscosity effect on k(cat)/K(m) for MBP was apparent (k(cat)/K(m(MBP)) = 2.4 +/- 1 microM(-1) s(-1), k(cat)/K(m(MBP))(eta) = 1.0 +/- 0.1), while no viscosity effect was observed on k(cat)/K(m) for the phosphorylation of ERKtide (k(cat)/K(m(ERKtide)) = (4 +/- 2) x 10(-3) microM(-1) s(-1), k(cat)/K(m(ERKtide))(eta) = -0.02 +/- 0.02). This is consistent with the diffusion-limited binding of MBP, in contrast to the rapid-equilibrium binding of ERKtide, to form the ternary Michaelis complex. Calculated values for binding constants show that the estimated value for K(d(MBP)) (/= 1.5 mM). The dramatically higher catalytic efficiency of MBP in comparison to that of ERKtide ( approximately 600-fold difference) is largely attributable to the slow dissociation rate of MBP (/=56 s(-1)), from the ERK2 active site.     

Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.     

Kinetic properties of human placental glucose-6-phosphate dehydrogenase

The kinetic properties of placental glucose-6-phosphate dehydrogenase were studied, since this enzyme is expected to be an important component of the placental protection system. In this capacity it is also very important for the health of the fetus. The placental enzyme obeyed "Rapid Equilibrium Ordered Bi Bi" sequential kinetics with K(m) values of 40+/-8 microM for glucose-6-phosphate and 20+/-10 microM for NADP. Glucose-6-phosphate, 2-deoxyglucose-6-phosphate and galactose-6-phosphate were used with catalytic efficiencies (k(cat)/K(m)) of 7.4 x 10(6), 4.89 x 10(4) and 1.57 x 10(4) M(-1).s(-1), respectively. The K(m)app values for galactose-6-phosphate and for 2-deoxyglucose-6-phosphate were 10+/-2 and 0.87+/-0.06 mM. With galactose-6-phosphate as substrate, the same K(m) value for NADP as glucose-6-phosphate was obtained and it was independent of galactose-6-phosphate concentration. On the other hand, when 2-deoxyglucose-6-phosphate used as substrate, the K(m) for NADP decreased from 30+/-6 to 10+/-2 microM as the substrate concentration was increased from 0.3 to 1.5 mM. Deamino-NADP, but not NAD, was a coenzyme for placental glucose-6-phosphate dehydrogenase. The catalytic efficiencies of NADP and deamino-NADP (glucose-6-phosphate as substrate) were 1.48 x 10(7) and 4.80 x 10(6) M(-1)s(-1), respectively. With both coenzymes, a hyperbolic saturation and an inhibition above 300 microM coenzyme concentration, was observed. Human placental glucose-6-phosphate dehydrogenase was inhibited competitively by 2,3-diphosphoglycerate (K(i)=15+/-3 mM) and NADPH (K(i)=17.1+/-3.2 microM). The small dissociation constant for the G6PD:NADPH complex pointed to tight enzyme:NADPH binding and the important role of NADPH in the regulation of the pentose phosphate pathway.     

Natural substrate assay for chitinases using high-performance liquid chromatography: a comparison with existing assays

The determination of kinetic parameters of chitinases using natural substrates is difficult due to low K(m) values, which require the use of low substrate concentrations that are hard to measure. Using the natural substrate (GlcNAc)(4), we have developed an assay for the determination of k(cat) and K(m)values of chitinases. Product concentrations as low as 0.5 microM were detected using normal-phase high-performance liquid chromatography (HPLC) with an amide 80 column (0.20 x 25 cm) using spectrophotometric detection at 210 nm. By means of this assay, k(cat) and K(m)values for chitinases A (ChiA) and B (ChiB) of Serratia marcescens were found to be 33+/-1s(-1) and 9+/-1 microM and 28+/-2s(-1) and 4+/-2 microM, respectively. For ChiB, these values were compared to those found with commonly used substrates where the leaving group is a (nonnatural) chromophore, revealing considerable differences. For example, assays with 4-methylumbelliferyl-(GlcNAc)(2) yielded a k(cat) value of 18+/-2s(-1) and a K(m) value of 30+/-6 microM. For two ChiB mutants containing a Trp --> Ala mutation in the +1 or +2 subsites, the natural substrate and the 4-methylumbelliferyl-(GlcNAc)(2) assays yielded rather similar K(m) values (5-fold difference at most) but showed dramatic differences in k(cat) values (up to 90-fold). These results illustrate the risk of using artificial substrates for characterization of chitinases and, thus, show that the new HPLC-based assay is a valuable tool for future chitinase research.     

HIV-1 protease: characterization of a catalytically competent enzyme-substrate intermediate.

The steady-state and pre-steady-state kinetic parameters for the interaction of E with the fluorogenic substrate 2-aminobenzoyl-Thr-Ile-Nle-Phe(p-NO(2))-Gln-Arg-NH(2) were determined in 1.25 M NaCl, 0.1 M MES-TRIS at pH 6.0 at 25 degrees C. At low concentrations of enzyme, the values of the K(m) and k(cat) calculated from steady-state data were 2.1 microM and 7.4 s(-1), respectively. At high concentrations of enzyme, the time-courses of fluorescence enhancement associated with catalysis were very dependent on the excitation wavelength used to monitor the reaction. Because the absorbance spectrum of the substrate overlapped the fluorescence emission spectrum of the enzyme, these abnormalities were attributed to fluorescence energy transfer between the enzyme and the substrate in an enzyme-substrate intermediate. The kinetic data collected with lambda(ex) = 280 nm and lambda(em) > 435 nm were analyzed according to the following mechanism in which EX was the species with enhanced fluorescence relative to substrate or products: [formula see text]. The values of the kinetic parameters with (1)H(2)O as the solvent were K = 13 microM, k(2) = 150 s(-1), k(-2) = 25 s(-1), and k(3) = 11 s(-1). The values of the kinetic parameters with (2)H(2)O as the solvent were K = 13 microM, k(2) = 210 s(-1), k(-2) = 12 s(-1), and k(3) = 4.4 s(-1). These values yielded solvent isotope effects of 2 on k(cat) and 0.9 on k(cat)/K(m). From analysis of the complete time-course of the fluorescence change (lambda(ex) = 280 nm and lambda(em) > 435 nm) during the course of substrate hydrolysis, the intermediate EX was determined to be 6.3-fold more fluorescent than the product, which, in turn, was 4.5-fold more fluorescent than ES or S. Rapid quench experiments with 2 N HCl as the quenching reagent confirmed that EX was a complex between enzyme and substrate. Consequently, the small burst in fluorescence observed when monitoring with lambda(ex) = 340 nm (0.3 product equiv per enzyme equivalent) was attributed to the fluorescence change upon transfer of substrate from an aqueous environment to a nonaqueous environment in the enzyme. These results were consistent with carbon-nitrogen bond cleavage being the major contributor to k(cat).     

Kinetics of the hydrolysis of N-benzoyl-l-serine methyl ester catalysed by bromelain and by papain. Analysis of modifier mechanisms by lattice nomography, computational methods of parameter evaluation for substrate-activated catalyses and consequences of postulated non-productive binding in bromelain- and papain-catalysed hydrolyses

1. N-Benzoyl-l-serine methyl ester was synthesized and evaluated as a substrate for bromelain (EC 3.4.22.4) and for papain (EC 3.4.22.2). 2. For the bromelain-catalysed hydrolysis at pH7.0, plots of [S(0)]/v(i) (initial substrate concn./initial velocity) versus [S(0)] are markedly curved, concave downwards. 3. Analysis by lattice nomography of a modifier kinetic mechanism in which the modifier is substrate reveals that concave-down [S(0)]/v(i) versus [S(0)] plots can arise when the ratio of the rate constants that characterize the breakdown of the binary (ES) and ternary (SES) complexes is either less than or greater than 1. In the latter case, there are severe restrictions on the values that may be taken by the ratio of the dissociation constants of the productive and non-productive binary complexes. 4. Concave-down [S(0)]/v(i) versus [S(0)] plots cannot arise from compulsory substrate activation. 5. Computational methods, based on function minimization, for determination of the apparent parameters that characterize a non-compulsory substrate-activated catalysis are described. 6. In an attempt to interpret the catalysis by bromelain of the hydrolysis of N-benzoyl-l-serine methyl ester in terms of substrate activation, the general substrate-activation model was simplified to one in which only one binary ES complex (that which gives rise directly to products) can form. 7. In terms of this model, the bromelain-catalysed hydrolysis of N-benzoyl-l-serine methyl ester at pH7.0, I=0.1 and 25 degrees C is characterized by K(m) (1) (the dissociation constant of ES)=1.22+/-0.73mm, k (the rate constant for the breakdown of ES to E+products, P)=1.57x10(-2)+/-0.32x10(-2)s(-1), K(a) (2) (the dissociation constant that characterizes the breakdown of SES to ES and S)=0.38+/-0.06m, and k' (the rate constant for the breakdown of SES to E+P+S)=0.45+/-0.04s(-1). 8. These parameters are compared with those in the literature that characterize the bromelain-catalysed hydrolysis of alpha-N-benzoyl-l-arginine ethyl ester and of alpha-N-benzoyl-l-arginine amide; K(m) (1) and k for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine amide hydrolysis and K(as) and k' for the serine ester hydrolysis are somewhat similar to K(m) and k(cat.) for the arginine ester hydrolysis. 9. A previous interpretation of the inter-relationships of the values of k(cat.) and K(m) for the bromelain-catalysed hydrolysis of the arginine ester and amide substrates is discussed critically and an alternative interpretation involving substantial non-productive binding of the arginine amide substrate to bromelain is suggested. 10. The parameters for the bromelain-catalysed hydrolysis of the serine ester substrate are tentatively interpreted in terms of non-productive binding in the binary complex and a decrease of this type of binding by ternary complex-formation. 11. The Michaelis parameters for the papain-catalysed hydrolysis of the serine ester substrate (K(m)=52+/-4mm, k(cat.)=2.80+/-0.1s(-1) at pH7.0, I=0.1, 25.0 degrees C) are similar to those for the papain-catalysed hydrolysis of methyl hippurate. 12. Urea and guanidine hydrochloride at concentrations of 1m have only small effects on the kinetic parameters for the hydrolysis of the serine ester substrate catalysed by bromelain and by papain.     

A Streptomyces collinus thiolase with novel acetyl-CoA:acyl carrier protein transacylase activity

Acetyl-CoA:acyl carrier protein (ACP) transacylase (ACT) activity has been demonstrated for the 3-ketoacyl-ACP synthase III (KASIII) which initiates fatty acid biosynthesis in the type II dissociable fatty acid synthases of plants and bacteria. Several lines of evidence have indicated the possibility of ACT activity being associated with proteins other than KASIII. Using a crude extract of Streptomyces collinus, we have resolved from KASIII an additional protein with ACT activity and subsequently purified it 85-fold in five chromatographic steps. The 45 kDa protein was shown by gel filtration to have a molecular mass of 185 +/- 35 kDa, consistent with a homotetrameric structure for the native enzyme. The corresponding gene (fadA) was cloned and sequenced and shown to encode a protein with amino acid sequence homology to type II thiolases. The fadA was expressed in Escherichia coli, and the resulting recombinant FadA enzyme purified by metal chelate chromatography was shown to have both ACT and thiolase activities. Kinetic studies revealed that in an ACT assay FadA had a substrate specificity for a two-carbon acetyl-CoA substrate (K(m) 8.7 +/- 1.4 microM) but was able to use ACPs from both type II fatty acid and polyketide synthases (Streptomyces glaucescens FabC ACP, K(m) 10.7 +/- 1.4 microM; E. coli FabC ACP, K(m) 8.8 +/- 2 microM; FrenN ACP, K(m) 44 +/- 12 microM). In the thiolase assay kinetic analyses revealed similar K(m) values for binding of substrates acetoacetyl-CoA (K(m) 9.8 +/- 0.8 microM) and CoA (K(m) 10.9 +/- 1.8 microM). A Cys92Ser mutant of FadA possessed virtually unchanged K(m) values for acetoacetyl-CoA and CoA but had a greater than 99% decrease in k(cat) for the thiolase activity. No detectable ACT activity was observed for the Cys92Ser mutant, demonstrating that both activities are associated with FadA and likely involve formation of the same covalent acetyl-S-Cys enzyme intermediate. An ACT activity with ACP has not previously been observed for thiolases and in the case of the S. collinus FadA is significantly lower (k(cat) 3 min(-1)) than the thiolase activity of FadA (k(cat) 2170 min(-1)). The ACT activity of FadA is comparable to the KAS activity and significantly higher than the ACT activity, reported for a streptomycete KASIII.     

The inhibition of metallo-beta-lactamase by thioxo-cephalosporin derivatives

The 8-thioxocephalosporins are poor substrates for the B. cereus metallo beta-lactamase (k(cat)/K(m)=61.4M(-1) s(-1)) and act as weak competitive inhibitors (K(i) approximately 700 microM). The hydrolysis product of thioxocephalosporin, a thioacid, also inhibits the enzyme competitively with a K(i)=96 microM, whereas the cyclic thioxo-piperazinedione, formed by intramolecular aminolysis of thioxocephalexin has a K(i) of 29 microM.     

A detailed kinetic study of Mox-1, a plasmid-encoded class C beta-lactamase

Surveys of beta-lactamases in different parts of the world show an important increase in class C beta-lactamases, thus the study of these enzymes is becoming an important issue. We created an overproduction system for Mox-1, a plasmid class C beta-lactamase, by cloning the gene encoding this enzyme, and placing it under the control of a T7 promoter, using vector pET 28a. The enzyme, purified by ion exchange chromatography, was used to obtain the molecular mass (38246), the N-terminal sequence (GEASPVDPLRPVV), and pI (8.9), and to perform a detailed kinetic study. Cephalotin was used as reporter substrate in the case of poor substrates. The kinetic study showed that benzylpenicillin, cephalotin, cefcapene and moxalactam were good substrates for Mox-1 (k(cat)/K(m) values >2.5 x 10(6) M(-1) s(-1)). On the other hand, ceftazidime and cefepime were poor substrates for this enzyme (K(m) values >200 microM). Clavulanic acid had no inhibitory effect on Mox-1 (K(m)=30.2 mM), however aztreonam behaved as an inhibitor of Mox-1 (K(i)=2.85 microM).     

Enzyme-coupled assay for beta-xylosidase hydrolysis of natural substrates

We describe here a new enzyme-coupled assay for the quantitation of d-xylose using readily available enzymes that allows kinetic evaluation of hemicellulolytic enzymes using natural xylooligosaccharide substrates. Hydrogen peroxide is generated as an intermediary analyte, which allows flexibility in the choice of the chromophore or fluorophore used as the final reporter. Thus, we present d-xylose quantitation results for solution-phase assays performed with both the fluorescent reporter resorufin, generated from N-acetyl-3,7-dihydroxyphenoxazine (Amplex Red), and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), whose corresponding radical cation has an absorbance maximum at approximately 400 nm. We also describe a useful solid-phase variation of the assay performed with the peroxidase substrate 3,3'-diaminobenzidine tetrahydrochloride, which produces an insoluble brown precipitate. In addition, kinetic parameters for hydrolysis of the natural substrates xylobiose and xylotriose were obtained using this assay for a glycosyl hydrolase family 39 beta-xylosidase from Thermoanaerobacterium sp. strain JW/SL YS485 (Swiss-Prot accession no. O30360). At higher xylobiose substrate concentrations the enzyme showed an increase in the rate indicative of transglycosylation, while for xylotriose marked substrate inhibition was observed. At lower xylobiose concentrations k(cat) was 2.7 +/- 0.4 s(-1), K(m) was 3.3 +/- 0.7 mM, and k(cat)/K(m) was 0.82 +/- 0.21 mM(-1) . s(-1). Nonlinear curve fitting to a substrate inhibition model showed that for xylotriose K(i) was 1.7 +/- 0.1 mM, k(cat) was 2.0 +/- 0.1 s(-1), K(m) was 0.144 +/- 0.011 mM, and k(cat)/K(m) was 14 +/- 1.3 mM(-1) . s(-1).     

Substrate selectivity of human cytochrome P450 2C9: importance of residues 476, 365, and 114 in recognition of diclofenac and sulfaphenazole and in mechanism-based inactivation by tienilic acid

A series of six site-directed mutants of CYP 2C9 were constructed with the aim to better define the amino acid residues that play a critical role in substrate selectivity of CYP 2C9, particularly in three distinctive properties of this enzyme: (i) its selective mechanism-based inactivation by tienilic acid (TA), (ii) its high affinity and hydroxylation regioselectivity toward diclofenac, and (iii) its high affinity for the competitive inhibitor sulfaphenazole (SPA). The S365A mutant exhibited kinetic characteristics for the 5-hydroxylation of TA very similar to those of CYP 2C9; however, this mutant did not undergo any detectable mechanism-based inactivation by TA, which indicates that the OH group of Ser 365 could be the nucleophile forming a covalent bond with an electrophilic metabolite of TA in TA-dependent inactivation of CYP 2C9. The F114I mutant was inactive toward the hydroxylation of diclofenac; moreover, detailed analyses of its interaction with a series of SPA derivatives by difference visible spectroscopy showed that the high affinity of SPA to CYP 2C9 (K(s)=0.4 microM) was completely lost when the phenyl substituent of Phe 114 was replaced with the alkyl group of Ile (K(s)=190+/-20 microM), or when the phenyl substituent of SPA was replaced with a cyclohexyl group (K(s)=120+/-30 microM). However, this cyclohexyl derivative of SPA interacted well with the F114I mutant (K(s)=1.6+/-0.5 microM). At the opposite end, the F94L and F110I mutants showed properties very similar to those of CYP 2C9 toward TA and diclofenac. Finally, the F476I mutant exhibited at least three main differences compared to CYP 2C9: (i) big changes in the k(cat) and K(m) values for TA and diclofenac hydroxylation, (ii) a 37-fold increase of the K(i) value found for the inhibition of CYP 2C9 by SPA, and (iii) a great change in the regioselectivity of diclofenac hydroxylation, the 5-hydroxylation of this substrate by CYP 2C9 F476I exhibiting a k(cat) of 28min(-1). These data indicate that Phe 114 plays an important role in recognition of aromatic substrates of CYP 2C9, presumably via Pi-stacking interactions. They also provide the first experimental evidence showing that Phe 476 plays a crucial role in substrate recognition and hydroxylation by CYP 2C9.     

Inhibition Effects in the Hydrolysis Reactions of Esters and Peptides Catalyzed by Carboxypeptidase A: An Example of Cooperative Binding Effects with a Monomeric Enzyme

N-benzoyl-L-phenylalanyl-L-phenylalanine is an excellent peptide substrate for carboxy-peptidase A; at 30 degrees C and pH 7.5, K(m) is 2.6 x 10(-5) M while k(cat) is 177 s(-1) (k(cat)/K(m) = 6.8 x 10(6) M(-1) s(-1)). Indole-3-acetic acid is a noncompetitive or mixed inhibitor towards the peptide and toward hippuryl-L-phenylalanine; plots of E/V vs [Inhibitor] are linear. N-Benzoyl-L-phenylalanine is a competitive inhibitor of peptide hydrolysis, and plots of E/V vs [Inhibitor] are again linear. One molecule of inhibitor binds per active site, and these inhibitors bind in different sites. At constant peptide substrate concentration and a series of constant concentrations of indole-3-acetic acid, plots of E/V vs the concentration of N-benzoyl-L-phenylalanine are linear and intersect behind the E/V axis and above the [Inhibitor] axis. This shows that both inhibitors can bind simultaneously and that binding of one facilitates the binding of the other (beta = 0.18). Employing the ester substrate hippuryl-DL,beta-phenyllactate, the same type of behavior is observed in the reverse sense; N-benzoyl-L-phenylalanine is a linear noncompetitive inhibitor and indole-3-acetic acid is a linear competitive inhibitor. Again the two inhibitor plot is linear and intersects above the [Inhibitor] axis (beta = 0.12). Previous X-ray crystallographic studies have indicated that indole-3-acetic acid binds in the hydrophobic pocket of the S'(1) site, while N-benzoyl-L-phenylalanine binds in the S(1)-S(2) site. The product complex for hydrolysis of N-benzoyl-L-phenylalanyl-L-phenylalanine (phenylalanine + N-benzoyl-L-phenylalanine) occupies both of these sites. However, the present work shows that the peptide substrate does not bind to the enzyme at pH 7.5 so as to be competitive with indole-3-acetic acid. The binding sites may be formed via conformational changes induced or stabilized by substrate and product binding. Copyright 2000 Academic Press.     

Kinetic constants of signal peptidase I using cytochrome b5 as a precursor substrate.

A procedure is described for measuring Escherichia coli signal peptidase I activity which exploits an intact precursor protein composed of the alkaline phosphatase signal peptide fused to the full length mammalian cytochrome b5. This cytochrome b5 precursor protein has been extensively characterised and shown to be processed accurately by purified signal peptidase I [Protein Expr. Purif. 7 (1996) 237]. The amphipathic, chimaeric cytochrome b5 precursor was isolated in mg quantities in a highly homogeneous state under non-denaturing conditions. The processing of the cytochrome b5 precursor by signal peptidase displayed Michaelis-Menten kinetics with K(m)=50 microM and k(cat)=11 s(-1). The K(m) was 20-fold lower than that obtained with signal peptide substrates and 3-fold higher than that reported for pro-OmpA-nuclease A precursor fusion. The corresponding turnover number, k(cat), was four orders of magnitude greater than the peptide substrates but was 2-fold lower than pro-OmpA-nuclease A precursor fusion. These results confirm that both the affinities and the catalytic power of the signal peptidase are significantly higher for macromolecular precursor substrates than for the shorter signal peptide substrates.     

The initiating steps of a type II fatty acid synthase in Plasmodium falciparum are catalyzed by pfACP,pfMCAT, and pfKASIII

Malaria, a disease caused by protozoan parasites of the genus Plasmodium, is one of the most dangerous infectious diseases, claiming millions of lives and infecting hundreds of millions of people annually. The pressing need for new antimalarials has been answered by the discovery of new drug targets from the malaria genome project. One of the early findings was the discovery of two genes encoding Type II fatty acid biosynthesis proteins: ACP (acyl carrier protein) and KASIII (beta-ketoacyl-ACP synthase III). The initiating steps of a Type II system require a third protein: malonyl-coenzyme A:ACP transacylase (MCAT). Here we report the identification of a single gene from P. falciparum encoding pfMCAT and the functional characterization of this enzyme. Pure recombinant pfMCAT catalyzes malonyl transfer from malonyl-coenzyme A (malonyl-CoA) to pfACP. In contrast, pfACP(trans), a construct of pfACP containing an amino-terminal apicoplast transit peptide, was not a substrate for pfMCAT. The product of the pfMCAT reaction, malonyl-pfACP, is a substrate for pfKASIII, which catalyzes the decarboxylative condensation of malonyl-pfACP and various acyl-CoAs. Consistent with a role in de novo fatty acid biosynthesis, pfKASIII exhibited typical KAS (beta-ketoacyl ACP synthase) activity using acetyl-CoA as substrate (k(cat) 230 min(-1), K(M) 17.9 +/- 3.4 microM). The pfKASIII can also catalyze the condensation of malonyl-pfACP and butyryl-CoA (k(cat) 200 min(-1), K(M) 35.7 +/- 4.4 microM) with similar efficiency, whereas isobutyryl-CoA is a poor substrate and displayed 13-fold less activity than that observed for acetyl-CoA. The pfKASIII has little preference for malonyl-pfACP (k(cat)/K(M) 64.9 min(-1)microM(-1)) over E. coli malonyl-ACP (k(cat)/K(M) 44.8 min(-1)microM(-1)). The pfKASIII also catalyzes the acyl-CoA:ACP transacylase (ACAT) reaction typically exhibited by KASIII enzymes, but does so almost 700-fold slower than the KAS reaction. Thiolactomycin did not inhbit pfKASIII (IC(50) > 330 microM), but three structurally similar substituted 1,2-dithiole-3-one compounds did inhibit pfKASIII with IC(50) values between 0.53 microM and 10.4 microM. These compounds also inhibited the growth of P. falciparum in culture.     

Cloning and functional expression of a rodent brain cDNA encoding a novel protein with agmatinase activity, but not belonging to the arginase family

A rat brain cDNA encoding for a novel protein with agmatinase activity was cloned and functionally expressed. The protein was expressed as a histidine-tagged fusion product with a molecular weight of about 63 kDa. Agmatine hydrolysis was strictly dependent on Mn(2+); K(m) and k(cat) values were 2.5+/-0.2 mM and 0.8+/-0.2 s(-1), respectively. The product putrescine was a linear competitive inhibitor (K(i)=5+/-0.5 mM). The substrate specificity, metal ion requirement and pH optimum (9.5) coincide with those reported for Escherichia coli agmatinase, the best characterized of the agmatinases. However, as indicated by the k(cat)/K(m) (320 M(-1)s(-1)), the recombinant protein was about 290-fold less efficient than the bacterial enzyme. The deduced amino sequence revealed great differences with all known agmatinases, thus excluding the protein from the arginase family. It was, however, highly identical (>85%) to the predicted sequences for fragments of hypothetical or unnamed LIM domain-containing proteins. As a suggestion, the agmatinase activity is adscribed to a protein with an active site that promiscuously catalyze a reaction other than the one it evolved to catalyze.     

Overexpression and characterization of a carboxypeptidase from the hyperthermophilic archaeon Thermococcus sp. NA1

Genomic analysis of a hyperthermophilic archaeon, Thermococcus sp. NA1, revealed the presence of an 1,497 bp open reading frame, encoding a protein of 499 amino acids. The deduced amino acid sequence was similar to thermostable carboxypeptidase 1 from Pyrococcus furiosus, a member of peptidase family M32. Five motifs, including the HEXXH motif with two histidines coordinated with the active site metal, were conserved. The carboxypeptidase gene was cloned and overexpressed in Escherichia coli. Molecular masses assessed by SDS-PAGE and gel filtration were 61 kDa and 125 kDa respectively, which points to a dimeric structure for the recombinant enzyme, designated TNA1_CP. The enzyme showed optimum activity toward Z-Ala-Arg at pH 6.5 and 70-80 degrees C (k(cat)/K(m)=8.3 mM(-1) s(-1)). In comparison with that of P. furiosus CP (k(cat)/K(m)=667 mM(-1) s(-1)), TNA1_CP exhibited 80-fold lower catalytic efficiency. The enzyme showed broad substrate specificity with a preference for basic, aliphatic, and aromatic C-terminal amino acids. This broad specificity was confirmed by C-terminal ladder sequencing of porcine N-acetyl-renin substrate by TNA1_CP.     

The inhibition specificity of recombinant Penicillium funiculosum xylanase B towards wheat proteinaceous inhibitors

The filamentous fungus Penicillium funiculosum produces a mixture of modular and non-modular xylanases belonging to different glycoside hydrolase (GH) families. In the present study, we heterologously expressed the cDNA encoding GH11 xylanase B (XYNB) and studied the enzymatic properties of the recombinant enzyme. Expression in Escherichia coli led to the partial purification of a glutathione fusion protein from the soluble fraction whereas the recombinant protein produced in Pichia pastoris was successfully purified using a one-step chromatography. Despite O-glycosylation heterogeneity, the purified enzyme efficiently degraded low viscosity xylan [K(m)=40+/-3 g l(-1), V(max)=16.1+/-0.8 micromol xylose min(-1) and k(cat)=5405+/-150 s(-1) at pH 4.2 and 45 degrees C] and medium viscosity xylan [K(m)=34.5+/-3.2 g l(-1), V(max)=14.9+/-1.0 micromol xylose min(-1)k(cat)=4966+/-333 s(-1) at pH 4.2 and 45 degrees C]. XYNB was further tested for its ability to interact with wheat xylanase inhibitors. The xylanase activity of XYNB produced in P. pastoris was strongly inhibited by both XIP-I and TAXI-I in a competitive manner, with a K(i) of 89.7+/-8.5 and 2.9+/-0.3 nM, respectively, whereas no inhibition was detected with TAXI-II. Physical interaction of both TAXI-I and XIP-I with XYNB was observed using titration curves across a pH range 3-9.     

Selective neurotensin-derived internally quenched fluorogenic substrates for neurolysin (EC 3.4.24.16): comparison with thimet oligopeptidase (EC 3.4.24.15) and neprilysin (EC 3.4.24.11)

Internally quenched fluorescent peptides derived from neurotensin (pELYENKPRRPYIL) sequence were synthesized and assayed as substrates for neurolysin (EC 3.4.24.16), thimet oligopeptidase (EC 3.4.24.15 or TOP), and neprilysin (EC 3.4.24.11 or NEP). Abz-LYENKPRRPYILQ-EDDnp (where EDDnp is N-(2,4-dinitrophenyl)ethylenediamine and Abz is ortho-aminobenzoic acid) was derived from neurotensin by the introduction of Q-EDDnp at the C-terminal end of peptide and by the substitution of the pyroglutamic (pE) residue at N-terminus for Abz and a series of shorter peptides was obtained by deletion of amino acids residues from C-terminal, N-terminal, or both sides. Neurolysin and TOP hydrolyzed the substrates at P--Y or Y--I or R--R bonds depending on the sequence and size of the peptides, while NEP cleaved P-Y or Y-I bonds according to its S'(1) specificity. One of these substrates, Abz-NKPRRPQ-EDDnp was a specific and sensitive substrate for neurolysin (k(cat) = 7.0 s(-1), K(m) = 1.19 microM and k(cat)/K(m) = 5882 mM(-1). s(-1)), while it was completely resistant to NEP and poorly hydrolyzed by TOP and also by prolyl oligopeptidase (EC 3.4.21.26). Neurolysin concentrations as low as 1 pM were detected using this substrate under our conditions and its analogue Abz-NKPRAPQ-EDDnp was hydrolyzed by neurolysin with k(cat) = 14.03 s(-1), K(m) = 0.82 microM, and k(cat)/K(m) = 17,110 mM(-1). s(-1), being the best substrate so far described for this peptidase.