FlgD is a scaffolding protein needed for flagellar hook assembly in Salmonella typhimurium.

FlgD is known to be absolutely required for hook assembly, yet it has not been detected in the mature flagellum. We have overproduced and purified FlgD and raised an antibody against it. By using this antibody, we have detected FlgD in substantial amounts in isolated basal bodies from flgA, flgE, flgH, flgI, flgK, and fliK mutants, in much smaller amounts in those from the wild type and flgL, fliA, fliC, fliD, and fliE mutants, and not at all in those from flgB, flgD, flgG, and flgJ mutants. In terms of the morphological assembly pathway, these results indicate that FlgD is first added to the structure when the rod is completed and is discarded when the hook, having reached its mature length, has the first of the hook-filament junction proteins, FlgK, added to its tip. Immunoelectron microscopy established that FlgD initially is located at the distal end of the rod and eventually is located at the distal end of the hook. Thus, it appears to act as a hook-capping protein to enable assembly of hook protein subunits, much as another flagellar protein, FliD, does for the flagellin subunits of the filament. However, whereas FliD is associated with the filament tip indefinitely, FlgD is only transiently associated with the hook tip; i.e., it acts as a scaffolding protein. When FlgD was added to the culture medium of a flgD mutant, cells gained motility; thus, although the hook cap is normally added endogenously, it can be added exogenously. When culture media were analyzed for the presence of hook protein, it was found only with the flgD mutant and, in smaller amounts, the fliK (polyhook) mutant. Thus, although FlgD is needed for assembly of hook protein, it is not needed for its export.     

Mutations in fliK and flhB affecting flagellar hook and filament assembly in Salmonella typhimurium.

Mutations in the fliK gene of Salmonella typhimurium commonly cause failure to terminate hook assembly and initiate filament assembly (polyhook phenotype). Polyhook mutants give rise to pseudorevertants which are still defective in hook termination but have recovered the ability to assemble filament (polyhook-filament phenotype). The polyhook mutations have been found to be either frameshift or nonsense, resulting in truncation of the C terminus of FliK. Intragenic suppressors of frameshift mutations were found to be ones that restored the original frame (and therefore the C-terminal sequence), but in most cases with substantial loss of natural sequence and sometimes the introduction of artificial sequence; in no cases did intragenic suppression occur when significant disruption remained within the C-terminal region. By use of a novel PCR protocol, in-frame deletions affecting the N-terminal and central regions of FliK were constructed and the resulting phenotypes were examined. Small deletions resulted in almost normal hook length control and almost wild-type swarming. Larger deletions resulted in loss of control of hook length and poor swarming. The largest deletions severely affected filament assembly as well as hook length control. Extragenic suppressors map to an unlinked gene, flhB, which encodes an integral membrane protein (T. Hirano, S. Yamaguchi, K. Oosawa, and S.-I. Aizawa, J. Bacteriol. 176:5439-5449, 1994; K. Kutsukake, T. Minamino, and T. Yokoseki, J. Bacteriol. 176:7625-7629, 1994). They were either point mutations in the C-terminal cytoplasmic region of FlhB or frameshift or nonsense mutations close to the C terminus. The processes of hook and filament assembly and the roles of FliK and FlhB in these processes are discussed in light of these and other available data. We suggest that FliK measures hook length and, at the appropriate point, sends a signal to FlhB to switch the substrate specificity of export from hook protein to late proteins such as flagellin.     

Specific inactivator of flagellar reversal in Salmonella typhimurium.

Specific inhibition of flagellar rotation reversal was observed after exposure of chemotactic Salmonella typhimurium to citrate autoclaved at neutral pH. The presence of a rotation reversal inactivator was established in autoclaved citrate-containing media and nutrient broth. Since modulation of flagellar rotation by attractants and repellents is the basis of chemotactic behavior, a specific inhibitor of rotation reversal, which is essential for tumble generation, provides a useful probe into the molecular mechanism of bacterial chemotaxis. The inactivator inhibits clockwise rotation without affecting counterclockwise rotation, speed of rotation, or the capacity of the cells to grow and divide. Inactivation of clockwise rotation is gradual and irreversible, differing from the transient inhibition of clockwise rotation by attractants, which is characterized by an immediate suppression followed by a return to normal rotation patterns. The rotation reversal inactivator is stable to acidification, rotary evaporation, lyophilization, and rehydration.     

Variable symmetry in Salmonella typhimurium flagellar motors

Electron cryomicroscopy of rotor complexes of the Salmonella typhimurium flagellar motor, overproduced in a nonmotile Escherichia coli host, has revealed a variation in subunit symmetry of the cytoplasmic ring (C ring) module. C rings with subunit symmetries ranging from 31 to 38 were found. They formed a Gaussian distribution around a mean between 34 and 35, a similar number to that determined for native C rings. C-ring diameter scaled with the number of subunits, indicating that the elliptical-shaped subunits maintained constant intersubunit spacing. Taken together with evidence that the M ring does not correspondingly increase in size, this finding indicates that rotor assembly does not require strict stoichiometric interactions between the M- and C-ring subunits. Implications for motor function are discussed.     

Conformational switching in the flagellar filament of Salmonella typhimurium.

The flagellar filament of the mutant Salmonella typhimurium strain SJW814 is straight, and has a right-handed twist like the filament of SJW1655. Three-dimensional reconstructions from electron micrographs of ice-embedded filaments reveal a flagellin subunit that has the same domain organization as that of SJW1655. Both show slight changes from the domain organization of the subunits from SJW1660, which possesses a straight, left-handed filament. This points to the possible role of changes in subunit conformation in the left-to-right-handed structural transition in filaments. Comparison of the left and right-handed filaments shows that the subunit's orientation and intersubunit bonding appear to change. The orientation of the subunit in the SJW814 filament is intermediate between that of SJW1655 and SJW1660. Its intermediate orientation may explain why the filaments of SJW1655 and SJW1660 are locked in one conformation, whereas the filament of SJW814 can be induced to switch by, for example, changes in pH and ionic strength.     

Incomplete flagellar structures in nonflagellate mutants of Salmonella typhimurium.

Incomplete flagellar structures were detected in osmotically shocked cells or membrane-associated fraction of many nonflagellate mutants of Salmonella typhimurium by electron microscopy. The predominant types of these structures in the mutants were cistron specific. The incomplete basal bodies were detected in flaFI, flaFIV, flaFVIII, and flaFIX mutants, the structure homologous to a basal body in flaFV mutants, the polyhook-basal body complex in flaR mutants, and the hook-basal body complex in flaL and flaU mutants. No structures homologous to flagellar bases or their parts were detected in the early-fla group nonflagellate mutants of flaAI, flaAII, flaAIII, flaB, flaC, flaD, flaE, flaFII, flaFIII, flaFVI, flaFVII, flaFX, flaK, and flaM. From these observations, a process of flagellar morphogenesis was postulated. The functions of the early-fla group are essential to the formation of S ring-M ring-rod complexes bound to the membrane. The completion of basal bodies requires succeeding functions of flaFI, flaFIV, flaFVIII, and flaFIX. Next, the formation of hooks attached to basal bodies proceeds by the function of flaFV and by flaR, which controls the hook length. Flagellar filaments appear at the tips of hooks because of the functions of flaL, flaU, and flagellin genes.     

Operon structure of flagellar genes in Salmonella typhimurium

Summary In Salmonella typhimurium, more than 40 genes have been shown to be involved in flagellar formation and function and almost all of them have been assigned to three regions of the chromosome, termed region I, region II, and region III. In the present study, a large number of transposon-insertion mutants in these flagellar genes were isolated using Tn10 and Mud1. The flaV gene was found to be a strong hot spot for Tn10 insertion. Complementation analysis of the polarity effects exerted by the transposon-insertion mutants defined 13 different flagellar operons; 3 in region I, 4 in region II, and 6 in region III. These results are compared with the reported arrangement of the corresponding genes in Escherichia coli.     

Flagellar assembly in Salmonella typhimurium

The bacterial flagellum is a motility apparatus in which a long helical filament - the propeller - is driven by a rotary motor embedded in the cell surface. Out of more than 40 genes required for construction of a fully functional flagellum in Salmonella typhimurium, only 18 gene products have been identified in the mature structure. Some other flagellar proteins play logistical roles during construction, which involves the selective export of flagellar components through a central hole in the flagellum. The whole structure is constructed from base to tip by linear assembly; that is, by adding new components on the growing end, resulting in the distal growth of each substructure. Components of the substructures do not necessarily self-assemble, but often demand the help of other proteins. Recent progress in the understanding of flagellar assembly, which has been most extensively studied in S. typhimurium, is reviewed.     

Structural genes for flagellar hook-associated proteins in Salmonella typhimurium.

The flaW, flaU, and flaV genes of Salmonella typhimurium LT2 were cloned into pBR322. These genes were mapped on the cloned DNA fragments by restriction endonuclease analysis and construction of the deletion derivatives. Their gene products were identified, by the minicell method, as proteins whose molecular weights were estimated to be 59,000 for the flaW product, 31,000 for the flaU product, and 48,000 for the flaV product. These values are identical to those of three species of hook-associated proteins (HAPs), namely, HAP1, HAP3, and HAP2. Furthermore, antibodies against HAP1, HAP3, and HAP2 specifically reacted with the gene products of flaW, flaU, and flaV, respectively. Therefore, we concluded that they are structural genes for HAPs. The antibodies against HAP1 and HAP3 also specifically reacted with the gene products of flaS and flaT of Escherichia coli, respectively. This indicates that these gene products are HAPs in E. coli. This result is consistent with the demonstration that flaS and flaT of E. coli are functionally homologous with flaW and flaU of S. typhimurium.     

Locations of hook-associated proteins in flagellar structures of Salmonella typhimurium.

Hooks of the flagella of Salmonella typhimurium were purified from an flaL mutant. Hook-associated proteins, namely HAP1, HAP2, and HAP3, were separated from them, and the antibody against each HAP was prepared. By immunoelectron microscopic observation, these three kinds of antiHAP antibodies were found to bind on the distal ends of hooks of filamentless mutants consistently with their composition of HAPs. The antiHAP2 antibody bound to the very tops of the claw-shaped ends of the hooks which contain all three HAPS. The antibodies against HAP1 and HAP3 bound to the basal areas and the middle areas, respectively, of the claw-shaped ends. The order of disassembly of the component proteins by heat treatment of the hook structure from the filamentless mutants was (HAP2, HAP3) greater than HAP1 greater than hook protein. These observations were consistent with our layered structure model: HAP1, HAP3, and HAP2 are assembled at the distal end of the hook in this sequence. All three HAPs were detected in the hook-filament complexes prepared from a flagellate strain. When the hook-filament structure was treated with antibody against HAP1 and with the anti-rabbit immunoglobulin G antibody, the antibody aggregate was observed in the region corresponding to the boundary between filament and hook. This observation strongly suggests that HAP1 is the protein connecting filament with hook. The locations of HAP2 and HAP3 in the hook-filament structure were not clarified with the same procedure.     

Substructure of the flagellar basal body of Salmonella typhimurium.

The Salmonella typhimurium basal body, a part of the flagellar rotary motor, consists of four rings (denoted M, S, P and L) and a coaxial rod. Using low-dose electron microscopy and image averaging methods on negatively stained and frozen-hydrated preparations, we examined whole basal body complexes and subcomplexes obtained by dissociation in acid. Dissociation occurs in steps, allowing us to obtain images of substructures lacking the M ring, lacking the M and S rings, and lacking the M and S rings and the proximal portion of the rod. We obtained images of the L and P ring subcomplex. The existence of a subcomplex missing only the M ring suggests either that the S and M rings derive from two different proteins, or that the M ring is a labile domain of a single protein, which makes up both rings. At the 25 to 30 A resolution of our averaged images, the L, P and S rings appear cylindrically symmetric. Images of the M ring show variability that may be due to differences in angular orientation of the grid, but equally could be due to structural variations. Three-dimensional reconstructions of these structures from the averaged images reveal the internal structure and spatial organization of these components.     

Overproduced Salmonella typhimurium flagellar motor switch complexes

Three Salmonella typhimurium flagellar motor proteins, FliG, FliM and FliN, are required for the switching of rotation sense. The proteins have been localized to the cytoplasmic module of the flagellar base. Structures, which were morphologically indistinguishable from the native transmembrane MS-ring and cytoplasmic C-ring basal body modules, formed in Escherichia coli upon plasmid-encoded synthesis of these proteins together with FliF. The structures localized to the cell membrane and contained all three motor proteins, as determined by immuno-electron microscopy. This result supports the deduction, based on earlier biochemical analysis, that the C-ring is composed entirely of these proteins and, therefore, functions as a dedicated motor component. In addition, it demonstrates that the morphologically correct assembly of the C-ring onto the MS-ring proceeds independently of other structural components of these modules.     

Hook-associated proteins essential for flagellar filament formation in Salmonella typhimurium.

The hooks of the flagella of Salmonella typhimurium were purified by a newly developed method, using a flaL mutant without a filament, and the hook components were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. As a result, we detected three protein species in addition to hook protein. We call these three proteins hook-associated proteins (HAPs). Their molecular weights were 59,000 for HAP1, 53,000 for HAP2, and 31,000 for HAP3. The HAP1/hook protein/HAP3/HAP2 molar ratio, calculated from their relative amounts and their molecular weights, was 1:10:1.1:0.53. The compositions of HAPs were analyzed in the hooks from the other filamentless mutants which were defective in H1 H2, flaV, flaU, or flaW. Hooks from the H1 H2 mutant had the same HAP composition as hooks from the flaL mutant. Hooks from the flaV mutants contained HAP1 and HAP3. Hooks from the flaU mutants contained HAP1. Hooks from the flaW mutants contained a very small amount of HAP3. From these results, the process of hook morphogenesis and the genes responsible for each step were postulated. Electron micrographs of hooks from the filamentless mutants showed that hooks which contained all three HAPs had a sharp clawlike tip, whereas hooks lacking any HAP had a flat tip. Electron micrographs of hooks treated with antibody against the hook protein showed that each claw-shaped end was not covered with antibody. These results strongly suggest that all three HAPs or at least some of them are located at the claw-shaped end and play an essential role in filament formation.     

Subdivision of flagellar genes of Salmonella typhimurium into regions responsible for assembly, rotation, and switching.

Three flagellar genes of Salmonella typhimurium (flaAII.2, flaQ, and flaN) were found to be multifunctional, each being associated with four distinct mutant phenotypes: nonflagellate (Fla-), paralyzed (Mot-), nonchemotactic (Che-) with clockwise motor bias, and nonchemotactic (Che-) with counterclockwise motor bias. The distribution of Fla, Mot, and Che mutational sites within each gene was examined. Fla sites were fairly broadly distributed, whereas Mot and Che sites were more narrowly defined. Local subregions rich in sites of one type were not generally rich in sites of another type. Among Che sites, there was little overlap between those corresponding to a clockwise bias and those corresponding to a counterclockwise bias. Our results suggest that within the corresponding gene products there are specialized subregions for flagellar structure, motor rotation, and control of the sense of rotation.     

Role of gene flaFV on flagellar hook formation in Salmonella typhimurium.

Nine temperature-sensitive nonflagellate mutants defective in flaFV were isolated from a strain of Salmonella typhimurium. Among them three mutants were found to produce flagella with abnormally shaped (either straight or irregularly curved) hooks at the permissive temperature. Two mutations that rendered hooks straight were located in one of the eight segments of flaFV defined by deletion mapping. The mutation that rendered hooks irregularly curved was located in a different segment. An flaR mutation was introduced into the latter mutant. At the permissive temperature, the resulting double mutant produced polyhooks whose wavelength and amplitude were both exceedingly reduced. These polyhook structures were more thermolabile than those of the flaFV+ strain. Hook protein of the former strain was shown to have a slightly positive electric charge compared with that of the latter. From these results and other available information, it is inferred that flaFV is the structural gene for the hook protein in Salmonella.     

Salmonella typhimurium fliG and fliN mutations causing defects in assembly, rotation, and switching of the flagellar motor.

FliG, FliM, and FliN are three proteins of Salmonella typhimurium that affect the rotation and switching of direction of the flagellar motor. An analysis of mutant alleles of FliM has been described recently (H. Sockett, S. Yamaguchi, M. Kihara, V. M. Irikura, and R. M. Macnab, J. Bacteriol. 174:793-806, 1992). We have now analyzed a large number of mutations in the fliG and fliN genes that are responsible for four different types of defects: failure to assembly flagella (nonflagellate phenotype), failure to rotate flagella (paralyzed phenotype), and failure to display normal chemotaxis as a result of an abnormally high bias to clockwise (CW) or counterclockwise (CCW) rotation (CW-bias and CCW-bias phenotypes, respectively). The null phenotype for fliG, caused by nonsense or frameshift mutations, was nonflagellate. However, a considerable part of the FliG amino acid sequence was not needed for flagellation, with several substantial in-frame deletions preventing motor rotation but not flagellar assembly. Missense mutations in fliG causing paralysis or abnormal switching occurred at a number of positions, almost all within the middle one-third of the gene. CW-bias and CCW-bias mutations tended to segregate into separate subclusters. The null phenotype of fliN is uncertain, since frameshift and nonsense mutations gave in some cases the nonflagellate phenotype and in other cases the paralyzed phenotype; in none of these cases was the phenotype a consequence of polar effects on downstream flagellar genes. Few positions in FliN were found to affect switching: only one gave rise to the CW mutant bias and only four gave rise to the CCW mutant bias. The different properties of the FliM, FliG, and FliN proteins with respect to the processes of assembly, rotation, and switching are discussed.