Specificity of hammerhead ribozyme cleavage.

To be effective in gene inactivation, the hammerhead ribozyme must cleave a complementary RNA target without deleterious effects from cleaving non-target RNAs that contain mismatches and shorter stretches of complementarity. The specificity of hammerhead cleavage was evaluated using HH16, a well-characterized ribozyme designed to cleave a target of 17 residues. Under standard reaction conditions, HH16 is unable to discriminate between its full-length substrate and 3'-truncated substrates, even when six fewer base pairs are formed between HH16 and the substrate. This striking lack of specificity arises because all the substrates bind to the ribozyme with sufficient affinity so that cleavage occurs before their affinity differences are manifested. In contrast, HH16 does exhibit high specificity towards certain 3'-truncated versions of altered substrates that either also contain a single base mismatch or are shortened at the 5' end. In addition, the specificity of HH16 is improved in the presence of p7 nucleocapsid protein from human immunodeficiency virus (HIV)-1, which accelerates the association and dissociation of RNA helices. These results support the view that the hammerhead has an intrinsic ability to discriminate against incorrect bases, but emphasizes that the high specificity is only observed in a certain range of helix lengths.     

Distinct reaction pathway promoted by non-divalent-metal cations in a tertiary stabilized hammerhead ribozyme

Divalent ion sensitivity of hammerhead ribozymes is significantly reduced when the RNA structure includes appropriate tertiary stabilization. Therefore, we investigated the activity of the tertiary stabilized "RzB" hammerhead ribozyme in several nondivalent ions. Ribozyme RzB is active in spermidine and Na(+) alone, although the cleavage rates are reduced by more than 1,000-fold relative to the rates observed in Mg(2+) and in transition metal ions. The trivalent cobalt hexammine (CoHex) ion is often used as an exchange-inert analog of hydrated magnesium ion. Trans-cleavage rates exceeded 8 min(-1) in 20 mM CoHex, which promoted cleavage through outersphere interactions. The stimulation of catalysis afforded by the tertiary structural interactions within RzB does not require Mg(2+), unlike other extended hammerhead ribozymes. Site-specific interaction with at least one Mg(2+) ion is suggested by CoHex competition experiments. In the presence of a constant, low concentration of Mg(2+), low concentrations of CoHex decreased the rate by two to three orders of magnitude relative to the rate in Mg(2+) alone. Cleavage rates increased as CoHex concentrations were raised further, but the final fraction cleaved was lower than what was observed in CoHex or Mg(2+) alone. These observations suggest that Mg(2+) and CoHex compete for binding and that they cause misfolded structures when they are together. The results of this study support the existence of an alternate catalytic mechanism used by nondivalent ions (especially CoHex) that is distinct from the one promoted by divalent metal ions, and they imply that divalent metals influence catalysis through a specific nonstructural role.     

A further investigation and reappraisal of the thio effect in the cleavage reaction catalyzed by a hammerhead ribozyme

We synthesized three types of 11mer substrate, namely the natural substrate S11O and the thiosubstituted substrates S11SpS and S11RpS, in which the respective pro-Sp and pro-Rp oxygen atoms were replaced by sulfur, and subjected them to detailed kinetic analysis in the cleavage reaction catalyzed by a hammerhead ribozyme. In agreement with previous findings, in the presence of Mg²⁺ or Ca²⁺ ions the rate of ribozyme-catalyzed cleavage of S11SpS was as high as that of S11O, whereas the corresponding rate for S11RpS was nearly four orders of magnitude lower than that for either S11O or S11SpS. However, the rate of the ribozyme-catalyzed reaction with each of the three substrates was enhanced by Cd²⁺ ions. Such results have generally been taken as evidence that supports the direct interaction of the sulfur atom at the Rp position of the cleavage site with the added Cd²⁺ ion. However, our present analysis demonstrates that (i) the added Cd²⁺ ion binds at the P9 site; (ii) the bound Cd²⁺ ion at the P9 site replaces two Mg²⁺ or two Ca²⁺ ions, an observation that suggests a different mode of interaction with the added Cd²⁺ ion; and, most importantly and in contrast to the conclusion reached by other investigators, (iii) the Cd²⁺ ion does not interact with the sulfur atom at the Rp position of the scissile phosphate either in the ground state or in the transition state.     

A helical twist-induced conformational switch activates cleavage in the hammerhead ribozyme

We have captured the structure of a pre-catalytic conformational intermediate of the hammerhead ribozyme using a phosphodiester tether formed between I and Stem II. This phosphodiester tether appears to mimic interactions in the wild-type hammerhead RNA that enable switching between nuclease and ligase activities, both of which are required in the replicative cycles of the satellite RNA viruses from which the hammerhead ribozyme is derived. The structure of this conformational intermediate reveals how the attacking nucleophile is positioned prior to cleavage, and demonstrates how restricting the ability of Stem I to rotate about its helical axis, via interactions with Stem II, can inhibit cleavage. Analogous covalent crosslinking experiments have demonstrated that imposing such restrictions on interhelical movement can change the hammerhead ribozyme from a nuclease to a ligase. Taken together, these results permit us to suggest that switching between ligase and nuclease activity is determined by the helical orientation of Stem I relative to Stem II.     

Metal ion specificities for folding and cleavage activity in the Schistosoma hammerhead ribozyme

The effects of various metal ions on cleavage activity and global folding have been studied in the extended Schistosoma hammerhead ribozyme. Fluorescence resonance energy transfer was used to probe global folding as a function of various monovalent and divalent metal ions in this ribozyme. The divalent metals ions Ca²⁺, Mg²⁺, Mn²⁺, and Sr²⁺ have a relatively small variation (less than sixfold) in their ability to globally fold the hammerhead ribozyme, which contrasts with the very large difference (>10,000-fold) in apparent rate constants for cleavage for these divalent metal ions in single-turnover kinetic experiments. There is still a very large range (>4600-fold) in the apparent rate constants for cleavage for these divalent metal ions measured in high salt (2 M NaCl) conditions where the ribozyme is globally folded. These results demonstrate that the identity of the divalent metal ion has little effect on global folding of the Schistosoma hammerhead ribozyme, whereas it has a very large effect on the cleavage kinetics. Mechanisms by which the identity of the divalent metal ion can have such a large effect on cleavage activity in the Schistosoma hammerhead ribozyme are discussed.     

The hammerhead cleavage reaction in monovalent cations

Recently, Murray et al. (Chem Biol, 1998, 5:587-595) found that the hammerhead ribozyme does not require divalent metal ions for activity if incubated in high (> or =1 M) concentrations of monovalent ions. We further characterized the hammerhead cleavage reaction in the absence of divalent metal. The hammerhead is active in a wide range of monovalent ions, and the rate enhancement in 4 M Li+ is only 20-fold less than that in 10 mM Mg2+. Among the Group I monovalent metals, rate correlates in a log-linear manner with ionic radius. The pH dependence of the reaction is similar in 10 mM Mg2+, 4 M Li+, and 4 M Na+. The exchange-inert metal complex Co(NH3)3+ also supports substantial hammerhead activity. These results suggest that a metal ion does not act as a base in the reaction, and that the effects of different metal ions on hammerhead cleavage rates primarily reflect structural contributions to catalysis.     

Importance of purine-pyridine hydroxyl and purine amino groups for hammerhead ribozyme cleavage

The importance of the 2′-hydroxyl and 2-amino groups of guanosine residues for the catalytic efficiency of a hammerhead ribozyme has been investigated. The three guanosines in the central core of a hammerhead ribozyme were replaced by deoxyinosine, inosine, and deoxyguanosine, and ribozymes containing these analogues were chemically synthesized. Most of the modified ribozymes are drastically descreased in their cleavage efficiency. However. deletion of the 2-amino group at G₈ (replacement with inosine, deoxyguanosine, deoxyinosine) caused little alteration in the catalytic activity relative to that obtained with the unmodified ribozyme. Whereas, deletion of the 2′-amino group at G₁₂ and G₅ (replacement with inosine, deoxyinosine, and deoxyguanosine) resulted in ribozymes with drastic decrease in the catalytic activity relative to that obtained with the unmodified ribozyme. In contrast, two uridine residues, U⁷ and U⁴, in the ribozyne sequence were replaced by deoxyuridine (dU). The dU4 complex resulted in a decrease in the catalytic rate, with relative cleavage activity that ws about half that observed for the native complex. By comparison, the dU⁷ complex exhibited a relative cleavage activity within 3.3-fold of that observed with native ribozyme/substrate complex. This result suggests that the 2′-hydroxyl group at U ⁷ is not essential for activity.

The importance of the 2′-hydroxyl, and 2-amino groups of guanosine residues for the catalytic efficiency of a hammerhead roibozyme has been investigated. Most of the modified rybozymes are drastically decreased in their cleavage efficiency. However, deletion of the 2-amino group at G₈ or deletion of the 2′-hydroxyl group at G₁₂ caused little alteration in the catalytic activity relative to that obtained with the unmodified ribozyme. In contrast, two uridine residues, U₇ and U₄, in the ribozyme sequence were replaced by deoxyuridine (dU). The U4 complex resulted in a decrease in the catalytic rate, with relative cleavage activity that was about half that observed for the native complex.     

Identification and characterization of a divalent metal ion-dependent cleavage site in the hammerhead ribozyme.

We describe a new RNA cleavage motif, found in the hammerhead ribozyme. Cleavage occurs between nucleotides G8 and A9, yielding a free 5'-hydroxyl group and a 2',3'-cyclic phosphate. This cleavage is dependent upon divalent metal ions and is the first evidence for a metalloribozyme known to show preference for Zn(2+). Cleavage is also observed in the presence of Ni(2+), Co(2+), Mn(2+), Cd(2+), and Pb(2+), while negligible cleavage was detected in the presence of the alkaline-earth metal ions Mg(2+), Ca(2+), Sr(2+), and Ba(2+). A linear relationship between the logarithm of the rate and pH was observed for the Zn(2+)-dependent cleavage, which is indicative of proton loss in the cleavage mechanism, either prior to or in the rate-determining step. We postulate that a zinc hydroxide complex, bound to the known A9/G10.1 metal ion binding site, abstracts the proton from the 2'-hydroxyl group of G8, which attacks the A9 phosphate and initiates cleavage. This hypothesis is supported by a previously reported crystal structure [Murray, J. B., Terwey, D. P., Maloney, L., Karpeisky, A., Usman, N., Beigelman, L., and Scott, W. G. (1998) Cell 92, 665-673], which shows the conformation required for RNA cleavage and proximity of the 2'-hydroxyl group to the metal ion complex.     

The role of the exocyclic amino groups of conserved purines in hammerhead ribozyme cleavage.

A series of 2 stranded hammerhead ribozymes has been synthesized in which single conserved adenosine residues have been replaced by nebularine or single guanosine residues by inosine. Comparison of the rates of trans-cleavage for the modified structures suggests the presence of interstrand non-Watson-Crick hydrogen bonding interactions including a GA:AG double mismatch. The exocyclic amino group of one of the guanosine residues is essential for cleavage.     

Morphing the minimal and full-length hammerhead ribozymes: implications for the cleavage mechanism

The hammerhead ribozyme is a small, intensively studied catalytic RNA, and has been used as a prototype for understanding how RNA catalysis works. In 2003, the importance of a set of tertiary contacts that appear in natural sequences of the hammerhead RNA was finally understood. The presence of these contact regions in stems I and II in 'full-length hammerhead ribozymes' is accompanied by an up to 1000-fold catalytic rate enhancement, indicating a profound structural effect upon the active site. Although the new structure resolved most of what appeared to be irreconcilable differences with mechanistic studies in solution, it did so in a way that is simultaneously reconcilable with earlier crystallographic mechanistic studies, within the limits imposed by the truncated sequence of the minimal hammerhead. Here we present an analysis of the correspondence between the full-length and minimal hammerhead crystal structures, using adiabatic morphing calculations that for the first time test the hypothesis that the minimal hammerhead structure occasionally visits the active conformation, both in solution and in the crystalline state in a sterically allowed manner, and argue that this is the simplest hypothesis that consistently explains all of the experimental observations.     

Length variation of helix III in a hammerhead ribozyme and its influence on cleavage activity

The previously described HIV-1 directed hammerhead ribozyme 2as-Rz12 can form with its target RNA 2s helices I and III of 128 and 278 base pairs (bp). A series of derivatives was made in which helix III was truncated to 8, 5, 4, 3, and 2 nucleotides (nt). These asymmetric hammerhead ribozymes were tested for in vitro cleavage and for inhibition of HIV-1 replication in human cells. Truncation of helix III to 8 bp did not affect the in vitro cleavage potential of the parental catalytic antisense RNA 2as-Rz12. Further truncation of helix III led to decreased cleavage rates, with no measurable cleavage activity for the 2 bp construct. All catalytically active constructs showed complex cleavage kinetics. Three kinetic subpopulations of ribozyme-substrate complexes could be discriminated that were cleaved with fast or slow rates or not at all. Gel purification of preformed ribozyme-substrate complexes led to a significant increase in cleavage rates. However, the complex cleavage pattern remained. In mammalian cells, the helix III-truncated constructs showed the same but no increased inhibitory effect of the comparable antisense RNA on HIV-1 replication.     

A biosensor for theophylline based on fluorescence detection of ligand-induced hammerhead ribozyme cleavage

Recently, Breaker and coworkers engineered hammerhead ribozymes that rearrange from a catalytically inactive to an active conformation upon allosteric binding of a specific ligand. To monitor cleavage activity in real time, we have coupled a donor-acceptor fluorophore pair to the termini of the substrate RNA of such a hammerhead ribozyme, modified to cleave in trans in the presence of the bronchodilator theophylline. In the intact substrate, the fluorophores interact by fluorescence resonance energy transfer (FRET). The specific FRET signal breaks down as the effector ligand binds, the substrate is cleaved, and the products dissociate, with a rate constant dependent on the concentration of the ligand. Our biosensor cleaves substrate at 0.46 min(-1) in 1 mM theophylline and 0.04 min(-1) without effector, and discriminates against caffeine, a structural relative of theophylline. We have measured the theophylline-dependence profile of this biosensor, showing that concentrations as low as 1 microM can be distinguished from background. To probe the mechanism of allosteric regulation, a single nucleotide in the communication domain between the catalytic and ligand-binding domains was mutated to destabilize the inactive conformation of the ribozyme. As predicted, this mutant shows the same activity (0.3 min(-1)) in the presence and absence of theophylline. Additionally, time-resolved FRET measurements on the biosensor ribozyme in complex with a noncleavable substrate analog reveal no significant changes in fluorophore distance distribution upon binding of effector.     

Cryoenzymology of the hammerhead ribozyme.

The technique of cryoenzymology has been applied to the hammerhead ribozyme in an attempt to uncover a structural rearrangement step prior to cleavage. Several cryosolvents were tested and 40% (v/v) methanol in water was found to perturb the system only minimally. This solvent allowed the measurement of ribozyme activity between 30 and -33 degrees C. Eyring plots are linear down to -27 degrees C, but a drastic reduction in activity occurs below this temperature. However, even at extremely low temperatures, the rate is still quite pH dependent, suggesting that the chemical step rather than a structural rearrangement is still rate-limiting. The nonlinearity of the Eyring plot may be the result of a transition to a cold-denatured state or a glassed state.     

A pH-dependent conformational change, rather than the chemical step, appears to be rate-limiting in the hammerhead ribozyme cleavage reaction.

We have investigated the chemical basis for a previously observed 7.8 A conformational change in the hammerhead ribozyme that positions the substrate for in-line attack. We have found that the conformational change can only be observed at or above pH 8.5 (in the presence of Co(2+)) and requires the presence of an ionizable 2'-OH at the cleavage site, and note that this observed apparent pK(a) of 8.5 for the conformational change is within experimental error (+/-0.5) of the previously reported apparent kinetic pK(a) of 8.5 for the hammerhead ribozyme in the presence of Co(2+). We have solved two crystal structures of hammerhead ribozymes having 2'-OCH(3) or 2'-F substitutions at the cleavage site and have found that these will not undergo a conformational change equivalent to that observed for the hammerhead ribozyme having an unmodified attacking nucleophile under otherwise identical conditions. We have also characterized the kinetics of cleavage in the crystal. In addition to verifying that the particular sequence of RNA that we crystallized cleaves faster in the crystal than in solution, we also find that the extent of cleavage in the crystal is complete, unlike in solution where this and most other hammerhead ribozyme substrates are cleaved only to about 70 % completion. The initial cleavage rate in the crystal obeys the expected log-linear relation between cleavage-rate and pH with a slope of 0.7, as has been observed for other hammerhead ribozyme sequences in solution, indicating that in both the crystal and in solution the pH-dependent step is rate-limiting. However, the cleavage rate in the crystal is biphasic, with the most dramatic distinction between initial (slower) and final (faster) phases appearing at pH 6.0. The initial phase corresponds to the pH-dependent cleavage rate observed in solution, but the second, faster phase is roughly pH-independent and closely parallels the cleavage rate observed at pH 8 (0.4/minute). This result is particularly remarkable because it entails that the rapidly cleaving phase at pH 6 is comparable to the cleavage rate for the fastest cleaving hammerhead ribozymes at pH 6. Based upon these observations, we conclude that the pH-dependent conformational change is the rate-determining step under standard conditions for the hammerhead ribozyme self-cleavage reaction, and that an ionizable 2'-proton at cleavage site is required for this conformational change. We further hypothesize that deprotonation of the cleavage-site 2'-oxygen drives this conformational change.     

Leakage and slow allostery limit performance of single drug-sensing aptazyme molecules based on the hammerhead ribozyme

Engineered “aptazymes” fuse in vitro selected aptamers with ribozymes to create allosteric enzymes as biosensing components and artificial gene regulatory switches through ligand-induced conformational rearrangement and activation. By contrast, activating ligand is employed as an enzymatic cofactor in the only known natural aptazyme, the glmS ribozyme, which is devoid of any detectable conformational rearrangements. To better understand this difference in biosensing strategy, we monitored by single molecule fluorescence resonance energy transfer (FRET) and 2-aminopurine (AP) fluorescence the global conformational dynamics and local base (un)stacking, respectively, of a prototypical drug-sensing aptazyme, built from a theophylline aptamer and the hammerhead ribozyme. Single molecule FRET reveals that a catalytically active state with distal Stems I and III of the hammerhead ribozyme is accessed both in the theophylline-bound and, if less frequently, in the ligand-free state. The resultant residual activity (leakage) in the absence of theophylline contributes to a limited dynamic range of the aptazyme. In addition, site-specific AP labeling shows that rapid local theophylline binding to the aptamer domain leads to only slow allosteric signal transduction into the ribozyme core. Our findings allow us to rationalize the suboptimal biosensing performance of the engineered compared to the natural aptazyme and to suggest improvement strategies. Our single molecule FRET approach also monitors in real time the previously elusive equilibrium docking dynamics of the hammerhead ribozyme between several inactive conformations and the active, long-lived, Y-shaped conformer.     

Zinc-dependent cleavage in the catalytic core of the hammerhead ribozyme: evidence for a pH-dependent conformational change

We have characterized a novel Zn²⁺-catalyzed cleavage site between nucleotides C3 and U4 in the catalytic core of the hammerhead ribozyme. In contrast to previously described divalent metal-ion-dependent cleavage of RNA, U4 cleavage is only observed in the presence of Zn²⁺. This new cleavage site has an unusual pH dependence, in that U4 cleavage products are only observed above pH 7.9 and reach a maximum yield at about pH 8.5. These data, together with the fact that no metal ion-binding site is observed in proximity to the U4 cleavage site in either of the crystal structures, point toward a pH-dependent conformational change in the hammerhead ribozyme. We have described previously Zn²⁺-dependent cleavage between G8 and A9 in the hammerhead ribozyme and have discovered that U4 cleavage occurs only after A9 cleavage. To our knowledge, this is the first example of sequential cleavage events as a possible regulatory mechanism in ribozymes.     

A Y form of hammerhead ribozyme trapped by photo-cross-links retains full cleavage activity.

The conformation in solution of a small bipartite I-III hammerhead ribozyme has been deduced from the photo-crosslinks formed between cleavable ribo-deoxysubstrates appropriately substituted with the probe deoxy-4-thiouridine and ribozyme residues. The ribozyme-substrate complex is able to adopt a Y-like structure with stems I and II in close proximity in the presence of 400 mM Na+ only. Indeed, a cross-link joining stem I (1.6) to loop II (AL2.4) forms in significant amount under these conditions. This cross-linked complex furthermore elicits, upon Mg2+ addition, a catalytic activity similar to that exhibited by the complexes cross-linked at the distal ends of either stem I or stem III or of the non-substituted bipartite complex. This shows that the reaction mechanism is fully compatible with a strong structural constraint between stems I and II and that sodium ions at high concentration (400 mM) are able to promote a proper folding of hammerhead ribozymes. None of the multiple cross-links formed within the ribozyme core (probe in position 16.1 or 1.1) was found catalytically active. The cross-link patterns nevertheless indicate a higher flexibility of the core in Na+ than in Mg2+. While most of the cross-links can be accommodated by the Y solution structure, some of them (16.1 to U4 and 2.1) definitely can not, suggesting that additional alternative inactive conformations exist in solution.     

RNA folding and misfolding of the hammerhead ribozyme

The hammerhead ribozyme undergoes a well-defined two-stage folding process induced by the sequential binding of two magnesium ions. These probably correspond to the formation of domain 2 (0-500 microM magnesium ions) and domain 1 (1-20 mM magnesium ions), respectively. In this study we have used fluorescence resonance energy transfer (FRET) to analyze the ion-induced folding of a number of variants of the hammerhead ribozyme. We find that both A14G and G8U mutations are highly destabilizing, such that these species are essentially unfolded under all conditions. Thus they appear to be blocked in the first stage of the folding process, and using uranyl-induced photocleavage we show that the core is completely accessible to this probe under these conditions. Changes at G5 do not affect the first transition but appear to provide a blockage at the second stage of folding; this is true of changes in the sugar (removal of the 2'-hydroxyl group) and base (G5C mutation, previously studied by comparative gel electrophoresis). Arrest of folding at this intermediate stage leads to a pattern of uranyl-induced photocleavage that is changed from the wild-type, but suggests a structure less open than the A14G mutant. Specific photocleavage at G5 is found only in the wild-type sequence, suggesting that this ion-binding site is formed late in the folding process. In addition to folding that is blocked at selected stages, we have also observed misfolding. Thus the A13G mutation appears to result in the ion-induced formation of a novel tertiary structure.     

Role of divalent metal ions in the hammerhead RNA cleavage reaction.

A hammerhead self-cleaving domain composed of two oligoribonucleotides was used to study the role of divalent metal ions in the cleavage reaction. Cleavage rates were measured as a function of MgCl2, MnCl2, and CaCl2 concentration in the absence or presence of spermine. In the presence of spermine, the rate vs metal ion concentration curves are broader, and lower concentrations of divalent ions are necessary for catalytic activity. This suggests that spermine can promote proper folding of the hammerhead and one or more divalent ions are required for the reaction. Six additional divalent ions were tested for their ability to support hammerhead cleavage. In the absence of spermine, rapid cleavage was observed with Co2+ while very slow cleavage occurred with Sr2+ and Ba2+. No detectable specific cleavage was observed with Cd2+, Zn2+, or Pb2+. However, in the presence of 0.5 mM spermine, rapid cleavage was observed with Zn2+ and Cd2+, and the rate with Sr2+ was increased, indicating that while these three ions could not promote proper folding of the hammerhead they were able to stimulate cleavage. These results suggest certain divalent ions either participate directly in the cleavage mechanism or are specifically involved in stabilizing the tertiary structure of the hammerhead. Additionally, an altered divalent metal ion specificity was observed when a unique phosphorothioate linkage was inserted at the cleavage site. The substitution of a sulfur for a nonbridging oxygen atom substantially reduced the affinity of an important Mg2+ ion necessary for efficient cleavage. In contrast, the reaction proceeds normally with Mn2+, presumably due to its ability to coordinate with both oxygen and sulfur.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cobalt hexammine inhibition of the hammerhead ribozyme

The effects of Co(NH(3))(6)(3+) on the hammerhead ribozyme are analyzed using several techniques, including activity measurements, electron paramagnetic resonance (EPR), and circular dichroism (CD) spectroscopies and thermal denaturation studies. Co(NH(3))(6)(3+) efficiently displaces Mn(2+) bound to the ribozyme with an apparent dissociation constant of K(d app) = 22 +/- 4.2 microM in 500 microM Mn(2+) (0.1 M NaCl). Displacement of Mn(2+) coincides with Co(NH(3))(6)(3+) inhibition of hammerhead activity in 500 microM Mn(2+), reducing the activity of the WT hammerhead by approximately 15-fold with an inhibition constant of K(i) = 30.9 +/- 2.3 microM. A residual 'slow' activity is observed in the presence of Co(NH(3))(6)(3+) and low concentrations of Mn(2+). Under these conditions, a single Mn(2+) ion remains bound and has a low-temperature EPR spectrum identical to that observed previously for the highest affinity Mn(2+) site in the hammerhead ribozyme in 1 M NaCl, tentatively attributed to the A9/G10.1 site [Morrissey, S. R. , Horton, T. E., and DeRose, V. J. (2000) J. Am. Chem. Soc. 122, 3473-3481]. Circular dichroism and thermal denaturation experiments also reveal structural effects that accompany the observed inhibition of cleavage and Mn(2+) displacement induced by addition of Co(NH(3))(6)(3+). Taken together, the data indicate that a high-affinity Co(NH(3))(6)(3+) site is responsible for significant inhibition accompanied by structural changes in the hammerhead ribozyme. In addition, the results support a model in which at least two types of metal sites, one of which requires inner-sphere coordination, support hammerhead activity.