Lipase-catalyzed acylation of lily polysaccharide in ionic liquid-containing systems

A comparative study was made of immobilized Burkholderia cepacia lipase (PSL-C)-catalyzed acylation of lily polysaccharide (LP) with vinyl acetate in organic solvents, ionic liquids (ILs) and IL-containing systems. The degree of substitution (DS) of the modified LP was used to evaluate the extent of acylation and thus enzymatic activity. In this manner, an eco-friendly solvent, 2-methyltetrahydrofuran (MeTHF), was found to be the most suitable organic reaction medium. However, compared to MeTHF, enhanced enzyme activity was observed when 1-butyl-3-methylimidazolium tetrafluorobrate ([C₄MIm][BF₄]) was used as the solvent. To further enhance the DS of the modified LP product, co-solvent mixtures of [C₄MIm][BF₄] and MeTHF were investigated. Among the various MeTHF–[C₄MIm][BF₄] systems examined, 20% (v/v) MeTHF–[C₄MIm][BF₄] produced the highest DS. In this reaction medium, the optimal water activity, reaction temperature and time were 0.33, 55 °C and 18 h, respectively, producing a product DS as high as 0.67. The PSL-C enzyme exhibited a much higher stability in the IL-containing system. Additionally, PSL-C-catalyzed acylation of LP was highly regioselective, causing acylation of only C6OH.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

Thermal Stability and Activity Regain of Horseradish Peroxidase in Aqueous Mixtures of Imidazolium-Based Ionic Liquids

Thermal deactivation kinetics of horseradish peroxidase (HRP) were studied from 45 to 90 °C in phosphate buffer and 5–25% (v,w/v) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄] and 1-butyl-3-methylimidazolium chloride [BMIM][Cl]. HRP activity at 25 °C was not affected by the presence of ionic liquids up to 20% (v,w/v). Increasing the ionic liquids concentration up to 25% (v,w/v) changed the biphasic character of deactivation kinetics to an apparent single first-order step. The presence of 5–10% (v/v) [BMIM][BF₄] significantly improved HRP thermal stability with lower activation energies for the deactivation second phase (83–87 kJ mol⁻¹). After deactivation, enhanced activity regain of the enzyme, up to 70–80% of the initial activity, was found in 25% (v/v) [BMIM][BF₄] and 10% (w/v) [BMIM][Cl] and correlated to prevalence of the deactivation first phase.     

Partitioning of acidic, basic and neutral amino acids into imidazolium-based ionic liquids

In this paper, partitioning behaviors of typical neutral (Alanine), acidic (Glutamic acid) and basic (Lysine) amino acids into imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] as extracting solvents were examined. [C₆mim][BF₄] showed the best efficiency for partitioning of amino acids. The partition coefficients of amino acids in ionic liquids were found to depend strongly on pH of the aqueous solution, amino acid and ionic liquid chemical structures. Different chemical forms of amino acids in aqueous solutions were pH dependent, so the pH value of the aqueous phase was a determining factor for extraction of amino acids into ionic liquid phase. Both water content of ionic liquids and charge densities of their anionic and cationic parts were important factors for partitioning of cationic and anionic forms of amino acids into ionic liquid phase. Extracted amino acids were back extracted into phosphate buffer solutions adjusted on appropriate pH values. The results showed that ionic liquids could be used as suitable modifiers on the stationary phase of an HPLC column for efficient separation of acidic, basic, and neutral amino acids.     

Tyrosinase activity in ionic liquids

Activity of mushroom tyrosinase was studied in three ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIm][PF₆]), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) and 1-butyl-3-methylimidazolium methylsulfate ([BMIm][MeSO₄]), and was compared to that in chloroform. Kinetic parameters of the enzyme were determined and the results indicate that the enzyme in ionic liquids basically follows the same catalytic mechanism as in water, and that the ionic liquids may affect the enzyme activity by direct interacting with the enzyme and thus hindering the E–S binding due to their high hydrophilicity and polarity.     

Optimization of (R,S)-1-phenylethanol kinetic resolution over Candida antarctica lipase B in ionic liquids

The kinetic resolution of racemates constitutes one major route to manufacture optically pure compounds. The enzymatic kinetic resolution of (R,S)-1-phenylethanol over Candida antarctica lipase B (CALB) by using vinyl acetate as the acyl donor in the acylation reaction was chosen as model reaction. A systematic screening and optimization of the reaction parameters, such as enzyme, ionic liquid and substrates concentrations with respect to the final product concentration, were performed. The enantioselectivity of immobilized CALB commercial preparation, Novozym 435, was assayed in several ionic liquids as reaction media. In particular, three different ionic liquids: (i) 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], (ii) 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] and (iii) 1-ethyl-3-methylimidazolium triflimide [emim][NTf₂] were tested. At 6.6% (w/w) of Novozym 435, dispersed in 9.520 M of [bmim][PF₆] at 313.15 K, using an equimolar ratio of vinyl acetate/(R,S)-1-phenylethanol after 3 h of bioconversion, the highest possible conversion (50%) was reached with enantiomeric excess for substrate higher than 99%.     

Enzyme Catalysed Synthesis in Ambient Temperature Ionic Liquids

The activity of three different lipases, a glycosidase and a protease in ionic liquids has been studied. Ambient temperature ionic liquids are a new class of solvents that are nonvolatile and nonflammable and thus an interesting alternative to classical organic solvents. Monitoring the synthesis of a simple ester, all lipases were found to exhibit both excellent activity and stability in the non-polar ionic liquid 1-butyl-3-methylimidazohum hexaflurophosphate ([bmin][PF₆], 1). Furthermore, β-galactosidase from E. coli and the Subtilisin protease Savinase^TM were both found to exhibit a hydrolytic activity in a 50% aqueous solution of the water-miscible ionic liquid 1-butyl-3-methyhmidazoUum tetra-fluoroborate ([bmin][BF₄], 2) comparable to the activity observed in 50% aqueous solutions of ethanol and acetonitrile.     

Effect of mobile phase additives on resolution of some nucleic compounds in high performance liquid chromatography

Here we investigate the chromatographic behavior, with reversed-phase high performance liquid chromatography (RP-HPLC) of nucleic compounds (nucleobases, nucleosides, and nucleotides) on a C₁₈ column in several different mobile phase additives, including1-butyl-3-methylimidazolium tetrafuloroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]) ionic liquids, ammonium formate, and potassium phosphate. The effect of the alkyl group length, the imidazolium ring, and the ionic liquid's counterions on retention and resolution of the samples were tested. The results show the potential application of a used buffer system, ion pairing system, and ionic liquid as mobile phase additives in liquid chromatography resolution of nucleic compounds.     

Growth of Escherichia coli, Pichia pastoris and Bacillus cereus in the Presence of the Ionic Liquids [BMIM][BF4] and [BMIM][PF6] and Organic Solvents

The influence of the two most commonly used ionic liquids (1-butyl-3-methyl imidazolium tetrafluoroborate, [BMIM][BF₄], 1-butyl-3-methyl imidazolium hexafluorophosphate, [BMIM][PF₆]) and three selected organic solvents (dimethylsulfoxide, ethanol, methanol) on the growth of Escherichia coli, Pichia pastoris and Bacillus cereus was investigated. [BMIM][BF₄] was toxic at 1% (v/v) on all three microorganisms. The minimal inhibitory concentration (MIC) of [BMIM][BF₄] on E. coli growth was between 0.7 and 1% (v/v). In contrast, [BMIM][PF₆] was less toxic for P. pastoris and B. cereus, whereas E. coli was not able to tolerate [BMIM][PF₆] (MIC value: 0.3–0.7% v/v). Growth of P. pastoris was unaffected by [BMIM][PF₆] at 10% (v/v). Similar results were found for dimethylsulfoxide. Thus, ionic liquids (ILs) can have substantial inhibitory effects on the growth of microorganisms, which should be taken into account for environmental reasons as well as for the use of ILs as co-solvents in biotransformations. Revisions requested 2 November 2005; Revisions received 20 December 2005     

Strong substrate-stabilizing effect of a water-miscible ionic liquid [BMIM][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The effects of a water-miscible ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), on both thermodynamics and kinetic mechanism of the horseradish peroxidase (HRP)-catalyzed oxidation of guaiacol (2-methoxyphenol) by H₂O₂ were investigated. The ionic liquid stabilized the ground state of guaiacol by causing an 8-fold increase of K_m from 3 to 23 mM upon the addition of 25% (v/v) [BMIM][BF₄]. In addition, the effect of [BMIM][BF₄] in decreasing the k_cat value of HRP catalysis was described by a non-competitive inhibition mechanism. The value of the inhibition constant of [BMIM][BF₄] was 2.9 M indicating that the ionic liquid plays the role of a weak non-competitive inhibitor for HRP catalysis.     

Enhanced activity,enantioselectivity and stability of papain in asymmetric hydrolysis of d,l-p-hydroxyphenylglycine methyl ester with ionic liquid

Papain-mediated asymmetric hydrolysis of D,L-p-hydroxyphenylglycine methyl ester (D,L-HPGME) was examined in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF₄) and different solvents. The activity of the enzyme varied widely with change in BMIM·BF₄ concentration, with 12.5% (v/v) being the optimum BMIM·BF₄ concentration for the reaction. Papain displayed much higher hydrolytic activity and enantioselectivity in phosphate buffer solution of 12.5% (v/v) BMIM·BF₄ (pH 7.0) than in other media examined. Comparative studies on the kinetics and activation energy (E_a) of this reaction performed in different media showed a higher V_max, a lower K_m and a lower E_a for the reaction taking place in phosphate buffer solution of 12.5% (v/v) BMIM·BF₄ than in other media tested. The stability of papain at 45°C was considerably enhanced in BMIM·BF₄ as compared with aqueous buffer, 2-propanol and acetonitrile. A half-life time of 169 h was observed with BMIM·BF₄ in the presence of substrate, which was 9.2–16.8-fold higher than those with the other solvents. These results suggested that BMIM·BF₄ is an excellent reaction medium for this reaction.     

Ionic liquids as a reaction medium for lipase-catalyzed methanolysis of sunflower oil

Ionic liquids, 1-butyl-3-methyl imidazolium hexafluorophosphate ([BMIm][PF₆]) and 1-ethyl-3-methyl imidazolium hexafluorophosphate ([EMIm][PF₆]), were used for the methanolysis of sunflower oil using Candida antarctica lipase (Novozyme 435) and gave yields of fatty acid methyl esters at 98–99% within 10 h. The optimum conditions of methanolysis in hydrophobic ionic liquids are 2% (w/w) lipase, 1:1 (w/w) oil/ionic liquid and 1:8 (mol/mol) oil/methanol at 58–60°C. Methanolysis using hydrophilic ionic liquids, 3-methyl imidazolium tetrafluoroborate ([HMIm][BF₄]) and 1-butyl-3-methyl imidazolium tetrafluoroborate ([BMIm][BF₄]), gave very poor yields. A hydrophobic ionic liquid thus protects the lipase from methanol. Recovered ionic liquids and lipase were used for four successive reaction cycles without any significant loss of activity.     

Synthesis of poly(ε-caprolactone) by an immobilized lipase coated with ionic liquids in a solvent-free condition

Polycaprolactone (PCL) was synthesized by ring-opening polymerization of ε-caprolactone through two different enzymatic processes. The lipase from Candida antarctica B, immobilized on macroporous acrylic acid beads, was employed either untreated or coated with small amounts of ionic liquids (ILs). Monocationic ionic liquids, [C _n MIm][NTf₂] (n = 2, 6, 12), as well as a dicationic ionic liquid, ([C₄(C₆Im)₂][NTf₂]₂), were used to coat the immobilized lipase and also as the reaction medium. In both methods, the polarity, anion of the ILs concentration and viscosity strongly influenced the reaction. Coating the immobilized enzyme with ILs improved catalytic activity and less ILs was required to produce PCL with a higher molecular weight and reaction yield. At 60 °C and ILs/Novozyme-435 coating ratio of 3:1 (w/w) for 48 h, the highest M _w and reaction yield of PCL were 35,600 g/mol and 62 % in the case of [C₁₂MIm][NTf₂], while the M _w and reaction yield of PCL was 20,300 g/mol and 54 % with [C₁₂MIm][NTf₂] and catalyzed by untreated lipase.     

Production of biodiesel fuel from soybean oil catalyzed by fungus whole-cell biocatalysts in ionic liquids

The methanolysis of soybean oil to produce a fatty acid methyl ester (ME, i.e., biodiesel fuel) was catalyzed by lipase-producing filamentous fungi immobilized on biomass support particles (BSPs) as a whole-cell biocatalyst in the presence of ionic liquids. We used four types of whole-cell biocatalysts: wild-type Rhizopus oryzae producing triacylglycerol lipase (w-ROL), recombinant Aspergillus oryzae expressing Fusarium heterosporum lipase (r-FHL), Candida antarctica lipase B (r-CALB), and mono- and diacylglycerol lipase from A. oryzae (r-mdlB). w-ROL gave the high yield of fatty acid methyl ester (ME) in ionic liquid [Emim][BF₄] or [Bmim][BF₄] biphasic systems following a 24 h reaction. While lipases are known to be severely deactivated by an excess amount of methanol (e.g. 1.5 Mequiv. of methanol against oil) in a conventional system, methanolysis successfully proceeded even with a methanol/oil ratio of 4 in the ionic liquid biphasic system, where the ionic liquids would work as a reservoir of methanol to suppress the enzyme deactivation. When only w-ROL was used as a biocatalyst for methanolysis, unreacted mono-glyceride remained due to the 1,3-positional specificity of R. oryzae lipase. High ME conversion was attained by the combined use of two types of whole-cell biocatalysts, w-ROL and r-mdlB. In a stability test, the activity of w-ROL was reduced to one-third of its original value after incubation in [Bmim][BF₄] for 72 h. The stability of w-ROL in [Bmim][BF₄] was greatly enhanced by cross-linking the biocatalyst with glutaraldehyde. The present study demonstrated that ionic liquids are promising candidates for use as the second solvent in biodiesel fuel production by whole-cell biocatalysts.     

A density functional theory study on the interactions between dibenzothiophene and tetrafluoroborate-based ionic liquids

The interactions between dibenzothiophene (DBT) and N-butyl-N-methylimidazolium tetrafluoroborate ([BMIM][BF₄]), N-butyl-N-methylmorpholinium tetrafluoroborate ([Bmmorpholinium][BF₄]), N-butyl-N-methylpiperdinium tetrafluoroborate ([BMPiper][BF₄]), N-butyl-N-methylpyrrolidinium tetrafluoroborate ([BMPyrro][BF₄]), and N-butylpyridinium tetrafluoroborate ([BPY][BF₄]) were investigated using density functional theory approach. Geometric, electron, and topological properties were analyzed using natural bond orbital, atoms in molecules theory, and noncovalent interaction methods in order to understand intermolecular interactions between DBT and ionic liquids. The result shows that hydrogen bond and van der Waals interactions are widespread in all the ionic liquids-DBT systems. Ion-π interactions between DBT and cation or anion are also observed, while π⁺-π interactions are only found in the [BMIM][BF₄]-DBT and [BPY][BF₄]-DBT systems. The order of interaction energy is [BPY][BF4]-DBT > [BMIM][BF₄]-DBT >> [BMPiper][BF₄]-DBT > [BMPyrro][BF₄]-DBT > [BMmorpholinum][BF₄]-DBT. The energies between DBT and the two ionic liquids containing aromatic cations are significantly higher.     

Effect of ionic liquid [BMIM][PF<Subscript>6</Subscript>] on asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

The effect of ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) on the asymmetric reduction of ethyl 2-oxo-4-phenylbutyrate (EOPB) to synthesize optical active ethyl 2-hydroxy-4-phenylbutyrate (EHPB) catalyzed by Saccharomyces cerevisiae was investigated. (R)-EHPB [70.4%, e.e.(R)] is obtained using ethyl ether or benzene as the solvent. The main product is (S)-EHPB [27.7%, e.e.(S)] in [BMIM][PF₆]. However, in ionic liquid-water (10:1, v/v) biphasic system, the enantioselectivity of the reduction is shifted towards (R)-side, and e.e.(R) is increased from 6.6 to 82.5% with the addition of ethanol (1%, v/v). The effect of the use of [BMIM][PF₆] as an additive in relatively small amounts on the reduction was also studied. We find that there is a decline in the enantioselectivity of the reduction in benzene. In addition, a decrease in the conversion of EOPB and the yield of EHPB with increasing [BMIM][PF₆] concentrations occurs in either organic solvent–water biphasic systems or benzene.     

Substrate stabilization and noncompetitive inhibition effects of a water-miscible ionic liquid [BMPy][BF<Subscript>4</Subscript>] in the catalysis of horseradish peroxidase

The inhibition mechanism of a water-miscible ionic liquid, N-butyl-3-methypyridinium tetrafluoroborate ([BMPy][BF₄]), on the catalysis of horseradish peroxidase (HRP) was investigated. The K _m value for the oxidation of guaiacol (2-methoxyphenol) with H₂O₂ catalyzed by HRP increased from 2.8 mM in 100% water to 12.6 mM in 25% (v/v) [BMPy][BF₄]. This increase of K _m by the ionic liquid was elucidated to be caused by the strong stabilization of the ground state of guaiacol by the ionic liquid. On the contrary, the k _cat value for the HRP-catalyzed reaction decreased from 13.8/sec in 100% water to 6.7/sec in 25% (v/v) [BMPy][BF₄]. Such decrease of k _cat value of HRP catalysis by the increasing content of [BMPy][BF₄] was described using the noncompetitive inhibition of the enzyme by the ionic liquid. The value of the inhibition constant of [BMPy][BF₄] was 1.48 M indicating that the ionic liquid exerts a weak noncompetitive inhibition effect on the HRP catalysis.     

Asymmetric alkene epoxidation by Mn(III)salen catalyst in ionic liquids

The enantioselective epoxidation of 6-cyano-2,2-dimethylchromene (Chrom) catalysed by the Jacobsen catalyst, using sodium hypochlorite (NaOCl) as oxygen source, at room temperature, was performed in a series of 1,3-dialkylimidazolium and tetra-alkyl-dimethylguanidium based ionic liquids. All the room temperature ionic liquids (RTILs) could be used as reaction media for the enantioselective epoxidation of the alkene giving, generally, moderate to good epoxide yields and enantiomeric excesses (ee%).For the series of ionic liquids derived from the 1,3-dialkylimidazolium cation, it was observed some relationship between the RTILs physical properties and the catalytic reaction parameters, exemplified by linear correlations between (i) the ee% and the α Kamlet-Taft parameter (hydrogen bond acidity of the solvent) for CH₂Cl₂ and [C₄m_nim][BF₄] ionic liquids (n = 1 or 2), and (ii) the ee% and the β Kamlet-Taft parameter (hydrogen bond basicity of the solvent) for CH₂Cl₂ and [C₄mim][X] ionic liquids (X = PF₆, NTf₂ or BF₄).All the RTILs could be reused in further catalytic cycles, with the exception of [C₈mim][PF₆]. The reutilisation of the Jacobsen catalyst for four times generally led to a decrease in the epoxide yield and to a slight decrease in the enantioselectivity. The recycling of the catalyst could be improved by imparting an ionic character to the complex through abstraction of the axially coordinated chloride anion (Cat 2). Other oxygen sources, such as iodosylbenzene, hydrogen peroxide and urea-hydrogen peroxide adduct, were also tested coupled with Jacobsen catalyst, but the best results were achieved with NaOCl.     

Identification of suitable ionic liquids for application in the enzymatic hydrolysis of rutin by an automated screening

An automated method in milliliter scale was developed for the screening of process parameters concerning the hydrolysis of the flavonoid rutin catalyzed by the rhamnosidase activity of naringinase from Penicillium decumbens. Besides the effect of additives such as ionic liquids and low molecular salts, the productivity in a multiple phase system as well as the recyclability of the enzyme in repetitive batches were studied. The hydrophobic ionic liquid (IL) trihexyl(tetradecyl)phosphonium bis(trifluormethylsulfonyl)imide [P(h₃)t][Tf₂N] was identified to combine the most favorable characteristics out of 23 investigated ILs with regard to enzyme compatibility, substrate solubility and enzyme partition coefficient. Also, for the corresponding cations 1-ethyl-3-methylimidazolium [EMIM], 1-butyl-3-methylimidazolium [BMIM], 1-butyl-1-methylpyrrolidinium [BMPL] and 1-octyl-3-methylimidazolium [OMIM], the entity with the [Tf₂N] anion was best tolerated by the naringinase. With increasing IL content, higher space time yields with up to 1.5 g/(L h) for 80% (v/v) [P(h₃)t][Tf₂N] were achieved. Enhanced specific enzyme activity was observed in the presence of Ca²⁺ ions. By addition of [P(h₃)t][Tf₂N] and calcium chloride, the reactive aqueous phase was successfully used in three repetitive batches with full conversion.     

H, F-HOESY and PGSE diffusion studies on ionic liquids: The effect of co-solvent on structure

¹H, ¹⁹F-HOESY studies on the ionic liquid based on 1-butyl-3-methylimidazolium tetrafluoroborate, [C₄C₁im]BF₄, [C₄C₁im][N(OTf)₂], and, partially, [C₄C₁im]PF₆, are reported. The addition of methanol separates the ions; however, in dichloromethane solution the anions and cations show strong HOESY contacts even after dilution and taken together with the PGSE diffusion measurements, the data suggest strong ion pairing in this solvent.