A C-terminal disulfide bridge in pediocin-like bacteriocins renders bacteriocin activity less temperature dependent and is a major determinant of the antimicrobial spectrum

Several lactic acid bacteria produce so-called pediocin-like bacteriocins that share sequence characteristics, but differ in activity and target cell specificity. The significance of a C-terminal disulfide bridge present in only a few of these bacteriocins was studied by site-directed mutagenesis of pediocin PA-1 (which naturally contains the bridge) and sakacin P (which lacks the bridge). Introduction of the C-terminal bridge into sakacin P broadened the target cell specificity of this bacteriocin, as illustrated by the fact that the mutants were 10 to 20 times more potent than the wild-type toward certain indicator strains, whereas the potency toward other indicator strains remained essentially unchanged. Like pediocin PA-1, disulfide-containing sakacin P mutants had the same potency at 20 and 37 degrees C, whereas wild-type sakacin P was approximately 10 times less potent at 37 degrees C than at 20 degrees C. Reciprocal effects on target cell specificity and the temperature dependence of potency were observed upon studying the effect of removing the C-terminal disulfide bridge from pediocin PA-1 by Cys-->Ser mutations. These results clearly show that a C-terminal disulfide bridge in pediocin-like bacteriocins contributes to widening of the antimicrobial spectrum as well as to higher potency at elevated temperatures. Interestingly, the differences between sakacin P and pediocin PA-1 in terms of the temperature dependency of their activities correlated well with the optimal temperatures for bacteriocin production and growth of the bacteriocin-producing strain.     

Biochemical and genetic characterization of coagulin, a new antilisterial bacteriocin in the pediocin family of bacteriocins, produced by Bacillus coagulans I(4)

A plasmid-linked antimicrobial peptide, named coagulin, produced by Bacillus coagulans I(4) has recently been reported (B. Hyronimus, C. Le Marrec and M. C. Urdaci, J. Appl. Microbiol. 85:42-50, 1998). In the present study, the complete, unambiguous primary amino acid sequence of the peptide was obtained by a combination of both N-terminal sequencing of purified peptide and the complete sequence deduced from the structural gene harbored by plasmid I(4). Data revealed that this peptide of 44 residues has an amino acid sequence similar to that described for pediocins AcH and PA-1, produced by different Pediococcus acidilactici strains and 100% identical. Coagulin and pediocin differed only by a single amino acid at their C terminus. Analysis of the genetic determinants revealed the presence, on the pI(4) DNA, of the entire 3.5-kb operon of four genes described for pediocin AcH and PA-1 production. No extended homology was observed between pSMB74 from P. acidilactici and pI(4) when analyzing the regions upstream and downstream of the operon. An oppositely oriented gene immediately dowstream of the bacteriocin operon specifies a 474-amino-acid protein which shows homology to Mob-Pre (plasmid recombination enzyme) proteins encoded by several small plasmids extracted from gram-positive bacteria. This is the first report of a pediocin-like peptide appearing naturally in a non-lactic acid bacterium genus.     

Isolation and characterization of pediocin L50, a new bacteriocin from Pediococcus acidilactici with a broad inhibitory spectrum.

Lactic acid bacteria were isolated from Spanish dry-fermented sausages and screened for bacteriocin production. About 10% of the isolates produced antimicrobial substances when grown on solid media, but only 2% produced detectable activity in liquid media. Strain L50, identified as Pediococcus acidilactici, showed the strongest inhibitory activity and was active against members of all of the gram-positive genera tested. The strain produced a heat-stable bacteriocin when grown at 8 to 32 degrees C but not at 45 degrees C. The bacteriocin was purified to homogeneity. Its mass was determined to be 5,250.11 +/- 0.30 by electrospray mass spectrometry. The N terminus of the bacteriocin was blocked for sequencing by Edman degradation, but a partial sequence of 42 amino acids was obtained after cleavage of the peptide by cyanogen bromide. The sequence showed no similarity to those of other bacteriocins. Pediocin L50 appears to contain modified amino acids but not lanthionine or methyl-lanthionine.     

Development of innovative pediocin PA-1 by DNA shuffling among class IIa bacteriocins

Pediocin PA-1 is a member of the class IIa bacteriocins, which show antimicrobial effects against lactic acid bacteria. To develop an improved version of pediocin PA-1, reciprocal chimeras between pediocin PA-1 and enterocin A, another class IIa bacteriocin, were constructed. Chimera EP, which consisted of the C-terminal half of pediocin PA-1 fused to the N-terminal half of enterocin A, showed increased activity against a strain of Leuconostoc lactis isolated from a sour-spoiled dairy product. To develop an even more effective version of this chimera, a DNA-shuffling library was constructed, wherein four specific regions within the N-terminal half of pediocin PA-1 were shuffled with the corresponding sequences from 10 other class IIa bacteriocins. Activity screening indicated that 63 out of 280 shuffled mutants had antimicrobial activity. A colony overlay activity assay showed that one of the mutants (designated B1) produced a >7.8-mm growth inhibition circle on L. lactis, whereas the parent pediocin PA-1 did not produce any circle. Furthermore, the active shuffled mutants showed increased activity against various species of Lactobacillus, Pediococcus, and Carnobacterium. Sequence analysis revealed that the active mutants had novel N-terminal sequences; in active mutant B1, for example, the parental pediocin PA-1 sequence (KYYGNGVTCGKHSC) was changed to TKYYGNGVSCTKSGC. These new and improved DNA-shuffled bacteriocins could prove useful as food additives for inhibiting sour spoilage of dairy products.     

Biochemical and Genetic Characterization of Coagulin, a New Antilisterial Bacteriocin in the Pediocin Family of Bacteriocins, Produced by Bacillus coagulans I4

A plasmid-linked antimicrobial peptide, named coagulin, produced by Bacillus coagulans I₄ has recently been reported (B. Hyronimus, C. Le Marrec and M. C. Urdaci, J. Appl. Microbiol. 85:42–50, 1998). In the present study, the complete, unambiguous primary amino acid sequence of the peptide was obtained by a combination of both N-terminal sequencing of purified peptide and the complete sequence deduced from the structural gene harbored by plasmid I₄. Data revealed that this peptide of 44 residues has an amino acid sequence similar to that described for pediocins AcH and PA-1, produced by different Pediococcus acidilactici strains and 100% identical. Coagulin and pediocin differed only by a single amino acid at their C terminus. Analysis of the genetic determinants revealed the presence, on the pI₄ DNA, of the entire 3.5-kb operon of four genes described for pediocin AcH and PA-1 production. No extended homology was observed between pSMB74 from P. acidilactici and pI₄ when analyzing the regions upstream and downstream of the operon. An oppositely oriented gene immediately dowstream of the bacteriocin operon specifies a 474-amino-acid protein which shows homology to Mob-Pre (plasmid recombination enzyme) proteins encoded by several small plasmids extracted from gram-positive bacteria. This is the first report of a pediocin-like peptide appearing naturally in a non-lactic acid bacterium genus.     

An antimicrobial peptide is produced by extracellular processing of a protein from Propionibacterium jensenii

A protease-activated antimicrobial peptide (PAMP) and its inactive precursor were purified from the culture supernatant of Propionibacterium jensenii LMG 3032 and characterized at the molecular level. PAMP is a 64-amino-acid cationic peptide of 6,383 Da with physicochemical features similar to those of bacteriocins from gram-positive bacteria. This peptide displayed bactericidal activity against several propionibacteria and lactobacilli. DNA sequencing indicated that the PAMP-encoding gene (pamA) is translated as a proprotein of 198 amino acids with an N-terminal signal peptide of 27 amino acids and that PAMP constitutes the C-terminal part of this precursor. The amino acid sequence of pro-PAMP showed no similarity to those of other known proteins. By using activity tests and mass spectrometry, we showed that PAMP was formed upon protease treatment of the precursor protein. The propionibacteria produced the PAMP precursor constitutively during growth up to a level of approximately 4 mg/liter, but the producing bacteria were unable to activate the precursor. The requirement for an external protease represents a novel strategy for generating antimicrobial peptides.     

Dynamic relationships among type IIa bacteriocins: temperature effects on antimicrobial activity and on structure of the C-terminal amphipathic alpha helix as a receptor-binding region

Dynamic aspects of structural relationships among class IIa bacteriocins, which are antimicrobial peptides from lactic acid bacteria (LAB), have been examined by use of circular dichroism (CD), molecular dynamics (MD) simulations, and activity testing. Pediocin PA-1 is a potent class IIa bacteriocin, which contains a second C-terminal disulfide bond in addition to the highly conserved N-terminal disulfide bond. A mutant of pediocin PA-1, ped[M31Nle], wherein the replacement of methionine by norleucine (Nle) gives enhanced stability toward aerobic oxidation, was synthesized by solid-phase peptide synthesis to study the activity of the peptide in relation to its structure. The secondary structural analysis from CD spectra of ped[M31Nle], carnobacteriocin B2 (cbn B2), and leucocin A (leuA) at different temperatures suggests that the alpha-helical region of these peptides is important for target recognition and activity. Using molecular modeling and dynamic simulations, complete models of pediocin PA-1, enterocin P, sakacin P, and curvacin A in 2,2,2-trifluoroethanol (TFE) were generated to compare structural relationships among this class of bacteriocins. Their high sequence similarity allows for the use of homology modeling techniques. Starting from homology models based on solution structures of leuA (PDB code 1CW6) and cbnB2 (PDB code 1CW5), results of 2-4 ns MD simulations in TFE and water at 298 and 313 K are reported. The results indicate that these peptides have a common helical C-terminal domain in TFE but a more variable beta sheet or coiled N terminus. At elevated temperatures, pediocin PA-1 maintains its overall structure, whereas peptides without the second C-terminal disulfide bond, such as enterocin P, sakacin P, curvacin A, leuA, and cbnB2 experience partial disruption of the helical section. Pediocin PA-1 and ped[M31Nle] were found to be equally active at different temperatures, whereas the other peptides that lack the second C-terminal disulfide bond are 30-50 times less antimicrobially potent at 310 K (37 degrees C) than at 298 K (25 degrees C). These results indicate that the structural changes in the helical region observed at elevated temperatures account for the loss of activity of these peptides. The presence of C-terminal hydrophobic residues on one side of the amphipathic helix in class IIa bacteriocins is an important feature for receptor recognition and specificity toward particular organisms. This study assists in the understanding of structure-activity relationships in type IIa bacteriocins and demonstrates the importance of the conserved C-terminal amphipathic alpha helix for activity.     

Heterologous coproduction of enterocin A and pediocin PA-1 by Lactococcus lactis: detection by specific peptide-directed antibodies

Antibodies against enterocin A were obtained by immunization of rabbits with synthetic peptides PH4 and PH5 designed, respectively, on the N- and C-terminal amino acid sequences of enterocin A and conjugated to the carrier protein KLH. Anti-PH4-KLH antibodies not only recognized enterocin A but also pediocin PA-1, enterocin P, and sakacin A, three bacteriocins which share the N-terminal class IIa consensus motif (YGNGVXC) that is contained in the sequence of the peptide PH4. In contrast, anti-PH5-KLH antibodies only reacted with enterocin A because the amino acid sequences of the C-terminal parts of class IIa bacteriocins are highly variable. Enterocin A and/or pediocin PA-1 structural and immunity genes were introduced in Lactococcus lactis IL1403 to achieve (co)production of the bacteriocins. The level of production of the two bacteriocins was significantly lower than that obtained by the wild-type producers, a fact that suggests a low efficiency of transport and/or maturation of these bacteriocins by the chromosomally encoded bacteriocin translocation machinery of IL1403. Despite the low production levels, both bacteriocins could be specifically detected and quantified with the anti-PH5-KLH (anti-enterocin A) antibodies isolated in this study and the anti-PH2-KLH (anti-pediocin PA-1) antibodies previously generated (J. M. Martínez, M. I. Martínez, A. M. Suárez, C. Herranz, P. Casaus, L. M. Cintas, J. M. Rodríguez, and P. E. Hernández, Appl. Environ. Microbiol. 64:4536-4545, 1998). In this work, the availability of antibodies for the specific detection and quantification of enterocin A and pediocin PA-1 was crucial to demonstrate coproduction of both bacteriocins by L. lactis IL1403(pJM04), because indicator strains that are selectively inhibited by each bacteriocin are not available.     

Cloning, expression, and nucleotide sequence of genes involved in production of pediocin PA-1, and bacteriocin from Pediococcus acidilactici PAC1.0.

The production of pediocin PA-1, a small heat-stable bacteriocin, is associated with the presence of the 9.4-kbp plasmid pSRQ11 in Pediococcus acidilactici PAC1.0. It was shown by subcloning of pSRQ11 in Escherichia coli cloning vectors that pediocin PA-1 is produced and, most probably, secreted by E. coli cells. Deletion analysis showed that a 5.6-kbp SalI-EcoRI fragment derived from pSRQ11 is required for pediocin PA-1 production. Nucleotide sequence analysis of this 5.6-kbp fragment indicated the presence of four clustered open reading frames (pedA, pedB, pedC, and pedD). The pedA gene encodes a 62-amino-acid precursor of pediocin PA-1, as the predicted amino acid residues 19 to 62 correspond entirely to the amino acid sequence of the purified pediocin PA-1. Introduction of a mutation in pedA resulted in a complete loss of pediocin production. The pedB and pedC genes, encoding proteins of 112 and 174 amino acid residues, respectively, are located directly downstream of the pediocin structural gene. Functions could not be assigned to their gene products; mutation analysis showed that the PedB protein is not involved in pediocin PA-1 production. The mutation analysis further revealed that the fourth gene, pedD, specifying a relatively large protein of 724 amino acids, is required for pediocin PA-1 production in E. coli. The predicted pedD protein shows strong similarities to several ATP-dependent transport proteins, including the E. coli hemolysin secretion protein HlyB and the ComA protein, which is required for competence induction for genetic transformation in Streptococcus pneumoniae.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cloning, expression, and nucleotide sequence of genes involved in production of pediocin PA-1, and bacteriocin from Pediococcus acidilactici PAC1.0.

The production of pediocin PA-1, a small heat-stable bacteriocin, is associated with the presence of the 9.4-kbp plasmid pSRQ11 in Pediococcus acidilactici PAC1.0. It was shown by subcloning of pSRQ11 in Escherichia coli cloning vectors that pediocin PA-1 is produced and, most probably, secreted by E. coli cells. Deletion analysis showed that a 5.6-kbp SalI-EcoRI fragment derived from pSRQ11 is required for pediocin PA-1 production. Nucleotide sequence analysis of this 5.6-kbp fragment indicated the presence of four clustered open reading frames (pedA, pedB, pedC, and pedD). The pedA gene encodes a 62-amino-acid precursor of pediocin PA-1, as the predicted amino acid residues 19 to 62 correspond entirely to the amino acid sequence of the purified pediocin PA-1. Introduction of a mutation in pedA resulted in a complete loss of pediocin production. The pedB and pedC genes, encoding proteins of 112 and 174 amino acid residues, respectively, are located directly downstream of the pediocin structural gene. Functions could not be assigned to their gene products; mutation analysis showed that the PedB protein is not involved in pediocin PA-1 production. The mutation analysis further revealed that the fourth gene, pedD, specifying a relatively large protein of 724 amino acids, is required for pediocin PA-1 production in E. coli. The predicted pedD protein shows strong similarities to several ATP-dependent transport proteins, including the E. coli hemolysin secretion protein HlyB and the ComA protein, which is required for competence induction for genetic transformation in Streptococcus pneumoniae.(ABSTRACT TRUNCATED AT 250 WORDS)     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

The amino acid sequence of ribonuclease U1, a guanine-specific ribonuclease from the fungus Ustilago sphaerogena

The complete amino acid sequence of ribonuclease U1 (RNase U1), a guanine-specific ribonuclease from a fungus, Ustilago sphaerogena, was determined by conventional protein sequencing, using peptide fragments obtained by several enzymatic cleavages of the performic acid-oxidized protein. The oxidized protein was first cleaved by trypsin and the resulting peptides were purified and their amino acid sequences were determined. These tryptic peptides were aligned with the aid of overlapping peptides isolated from a chymotryptic digest of the oxidized protein. The amino acid sequence thus deduced was further confirmed by isolation and analysis of peptides obtained by digestion of the oxidized protein with lysyl endopeptidase. The location of the disulfide bonds was deduced by isolation and analysis of cystine-containing peptides from a chymotryptic digest of heat-denatured RNase U1. These results showed that the protein is composed of a single polypeptide chain of 105 amino acid residues cross-linked by two disulfide bonds, having a molecular weight of 11,235, and that the NH2-terminus is blocked by a pyroglutamate residue. It has an overall homology with other guanine-specific or related ribonucleases, and shows 48% identity with RNase T1 and 38% identity with RNase U2.     

Weissellicin 110, a newly discovered bacteriocin from Weissella cibaria 110, isolated from plaa-som, a fermented fish product from Thailand

Weissella cibaria 110, isolated from the Thai fermented fish product plaa-som, was found to produce a bacteriocin active against some gram-positive bacteria. Bacteriocin activity was not eliminated by exposure to high temperatures or catalase but was destroyed by exposure to the proteolytic enzymes proteinase K and trypsin. The bacteriocin from W. cibaria 110 was purified, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the purified bacteriocin contained one protein band that was approximately 2.5 kDa in size. Mass spectrometry analysis showed the mass of the peptide to be approximately 3,487.8 Da. N-terminal amino acid sequence analysis was performed, and 27 amino acids were identified. Because it has no similarity to other known bacteriocins, this bacteriocin was defined as a new bacteriocin and termed weissellicin 110.     

Primary amino acid and DNA sequences of gassericin T, a lactacin F-family bacteriocin produced by Lactobacillus gasseri SBT2055

A broad-spectral bacteriocin, named gassericin T, produced by Lactobacillus gasseri SBT 2055 (from human feces) was isolated to homogeneity from the culture supernatant by hydrophobic chromatography. By SDS-PAGE and in situ activity assay, the purified gassericin T migrated as a single band with bacteriocin activity and molecular size of 5,400. A 2.9-kbp HindIII-HindIII fragment of chromosome DNA was hybridized with the oligonucleotide probe designed from the partial N-terminal amino acid sequence of gassericin T and was cloned. Six ORFs including the structural gene of gassericin T were deduced by computer analysis and the data bases. The structural gene of gassericin T (gatA) was identified as the fourth ORF, which encoded a protein composed of 75 amino acids that included the GG motif of the cleavage site. Chemical sequencing analysis of the complete amino acid sequence showed that gassericin T (57 amino acids) had a disulfide bond in the molecule and no modified amino acid residues, making it a class II bacteriocin. The gassericin T had 60% sequence similarity to mature LafA (57 amino acids, lactacin F, bacteriocins produced by L. johnsonii VPI11088), and the sequences around the processing site and C-terminal area were well conserved. The fifth ORF was designated as gatX, encoded as a peptide composed of 65 amino acids containing the GG motif of the putative cleavage site, however mature GatX and its antibacterial activity were not detected in the culture supernatant. GatX has higher similarity with LafX than with lactobin A (50 amino acids) belonging to the first lactacin F-family. These results indicated that gassericin T belongs to the hydrophobic class II bacteriocins and the most vicinal lactacin F-family.     

Characterization of a keratinolytic serine protease from Bacillus subtilis KS-1

A keratinolytic enzyme produced by Bacillus subtilis KS-1 isolated from poultry waste was purified and characterized using ultrfiltration, DEAE-Sephadex, and Sephadex G-100 chromatographies. The specific activity of the purified protease was 538.2 units/mg. The enzyme was shown to have a relative molecular mass of 25.4 kDa. The enzyme was made completely inactive by PMSF, which indicates a serine-protease. Dithiothreitol enhanced keratinolytic activity by 1.6 times at a concentration of 5.0 mM. These results suggest that the cleavage of the disulfide bonds with reducing agents can occur directly or by excretion of sulfite, which causes the sulfitolysis of the disulfide bonds. The first 10 amino acids of the N-terminal sequence are Ala-Gin-Pro-Val-Glu-Trp-Gly-Ile-Ser-Gln. The enzyme hydrolyzed casein and feather, but hydrolyzed casein more effectively than it did feather.     

Biochemical and genetic characterization of enterocin P, a novel sec-dependent bacteriocin from Enterococcus faecium P13 with a broad antimicrobial spectrum.

Enterocin P is a new bacteriocin produced by Enterococcus faecium P13 isolated from a Spanish dry-fermented sausage. Enterocin P inhibited most of tested spoilage and food-borne gram-positive pathogenic bacteria, such as Listeria monocytogenes, Staphylococcus aureus, Clostridium perfringens, and Clostridium botulinum. Enterocin P is produced during growth in MRS broth from 16 to 45 degrees C; it is heat resistant (60 min at 100 degrees C; 15 min at 121 degrees C) and can withstand exposure to pH between 2.0 and 11.0, freeze-thawing, lyophilization, and long-term storage at 4 and -20 degrees C. The bacteriocin was purified to homogeneity by ammonium sulfate precipitation, gel filtration, cation-exchange, hydrophobic-interaction, and reverse-phase liquid chromatography. The sequence of 43 amino acids of the N terminus was obtained by Edman degradation. DNA sequencing analysis of a 755-bp region revealed the presence of two consecutive open reading frames (ORFs). The first ORF encodes a 71-amino-acid protein containing a hydrophobic N-terminal sec-dependent leader sequence of 27 amino acids followed by the amino acid sequence corresponding to the purified and sequenced enterocin P. The bacteriocin is apparently synthesized as a prepeptide that is cleaved immediately after the Val-Asp-Ala residues (positions -3 to -1), resulting in the mature bacteriocin consisting of 44 amino acids, and with a theoretical molecular weight of 4,493. A second ORF, encoding a putative immunity protein composed of 88 amino acids with a calculated molecular weight of 9,886, was found immediately downstream of the enterocin P structural gene. Enterocin P shows a strong antilisterial activity and has the consensus sequence found in the pediocin-like bacteriocins; however, enterocin P is processed and secreted by the sec-dependent pathway.     

Weissellicin 110, a Newly Discovered Bacteriocin from Weissella cibaria 110, Isolated from Plaa-Som, a Fermented Fish Product from Thailand

Weissella cibaria 110, isolated from the Thai fermented fish product plaa-som, was found to produce a bacteriocin active against some gram-positive bacteria. Bacteriocin activity was not eliminated by exposure to high temperatures or catalase but was destroyed by exposure to the proteolytic enzymes proteinase K and trypsin. The bacteriocin from W. cibaria 110 was purified, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the purified bacteriocin contained one protein band that was approximately 2.5 kDa in size. Mass spectrometry analysis showed the mass of the peptide to be approximately 3,487.8 Da. N-terminal amino acid sequence analysis was performed, and 27 amino acids were identified. Because it has no similarity to other known bacteriocins, this bacteriocin was defined as a new bacteriocin and termed weissellicin 110.     

The Bactericidal Activity of Pediocin PA-1 Is Specifically Inhibited by a 15-mer Fragment That Spans the Bacteriocin from the Center toward the C Terminus

A 15-mer peptide fragment derived from pediocin PA-1 (from residue 20 to residue 34) specifically inhibited the bactericidal activity of pediocin PA-1. The fragment did not inhibit the pediocin-like bacteriocins sakacin P, leucocin A, and curvacin A to nearly the same extent as it inhibited pediocin PA-1. Enterocin A, however, was also significantly inhibited by this fragment, although not as greatly as pediocin PA-1. This is consistent with the fact that enterocin A contains the longest continuous sequence identical to that of pediocin PA-1 in the region spanned by the fragment. The fragment inhibited pediocin PA-1 to a much greater extent than did the other 29 possible 15-mer fragments that span pediocin PA-1. The results suggest that the fragment—by interacting with the target cells and/or pediocin PA-1—interferes specifically with pediocin-target cell interaction.     

Rapid and Efficient Purification Method for Small, Hydrophobic, Cationic Bacteriocins: Purification of Lactococcin B and Pediocin PA-1

The bacteriocins lactococcin B and pediocin PA-1 were purified by ethanol precipitation, preparative isoelectric focusing, and ultrafiltration. The procedure reproducibly leads to high final yields in comparison to the generally low yields obtained by column chromatography. Specifically, during isoelectric focusing no loss of activity occurs. The method, in general, should be applicable to small, hydrophobic, cationic bacteriocins.     

Location of the disulfide bonds in human coagulation factor XI: the presence of tandem apple domains

Factor XI is a plasma glycoprotein that participates in the blood coagulation cascade. Of the 19 disulfide bonds present in each of the subunits of the human protein, 16 were determined by amino acid sequence analysis of peptide fragments produced by chemical and enzymatic digestion. Four apple domains of 90 or 91 amino acids were identified in the tandem repeats present in the amino-terminal portion of each subunit of factor XI. The disulfide bonds in the carboxyl-terminal portion of the molecule were similar to those in the catalytic region of other serine proteases. The two identical subunits of factor XI were connected by a single disulfide bond at Cys321 linking each of the fourth apple domains while each of the Cys residues at position 11 in the first apple domains forms a disulfide bond with another Cys residue.