Effect of carbon nanotube coating of aligned nanofibrous polymer scaffolds on the neurite outgrowth of PC-12 cells

Neurite outgrowth from endogenous or transplanted cells is important for neural regeneration following nerve tissue injury. Modified substrates often provide better environments for cell adhesion and neurite outgrowth. This study was conducted to determine if MWCNT (multiwalled carbon nanotube)-coated electrospun PLCL [poly (l-lactic acid-co-3-caprolactone)] nanofibres improved the neurite outgrowth of PC-12 cells. To accomplish this, two groups, PC-12 cells in either uncoated PLCL scaffolds or MWCNT-coated PLCL scaffolds were cultured for 9 days. MWCNT-coated PLCL scaffolds showed improved adhesion, proliferation and neurite outgrowth of PC-12 cells. These findings suggest that MWCNT-coated nanofibrous scaffolds may be an attractive platform for cell transplantation application in neural tissue engineering.     

Radiation-induced biomimetic modification of dual-layered nano/microfibrous scaffolds for vascular tissue engineering

One of the interesting strategies for developing the artificial blood vessels is to generate multi-layered scaffolds for mimicking the structure of native blood vessels such as the intima, media, and adventitia. In this study, we prepared dual-layered poly(L-lactide-co-?-caprolactone) (PLCL) scaffolds with micro- and nanofibers as a basic construct of the vessel using electrospinning methods, which was functionalized using a gelatin through acrylic acid (AAc) grafting by γ-ray irradiation. Based on the microfibrous platform (fiber diameter 5 μm), the thickness of the nanofibrous layer (fiber diameter 700 nm) was controlled from 1.1 ± 0.8 to 32.2 ± 1.7 μm, and the mechanical property of the scaffolds was almost maintained despite the increase in thickness of the nanofibrous layer. The successful AAc graft by γ-ray irradiation could allow the gelatin immobilization on the scaffolds. The proliferation of smooth muscle cells (SMC) on the scaffolds toward a microfibrous layer was approximately 1.3-times greater than in the other groups, and the infiltration was significantly increased, presenting a wide cell distribution in the cross-section. In addition, human umbilical vein endothelial cell (HUVEC) adhesion toward nanofibrous layer was well-managed over the entire surface, and the accelerated proliferation was observed on the gelatin-functionalized scaffolds presenting the well-organized gap-junctions. Therefore, our biomimetic dual-layered scaffolds may be the alternative tools for replacing the damaged blood vessels.     

Immobilization of galactose ligands on acrylic acid graft-copolymerized poly(ethylene terephthalate) film and its application to hepatocyte culture

Surface modification of argon-plasma-pretreated poly(ethylene terephthalate) (PET) films via UV-induced graft copolymerization with acrylic acid (AAc) was carried out. Galactosylated surfaces were then obtained by coupling a galactose derivative (1-O-(6'-aminohexyl)-D-galactopyranoside) to the AAc graft chains with the aid of a water-soluble carbodiimide (WSC) and N-hydroxysulfosuccinimide (sulfo-NHS). The modified PET films were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact-angle measurements. The galactosylated PET films were used as substrates for hepatocyte culture. The effects of surface carboxyl group concentration on the extent of galactose ligand immobilization, the extent of hepatocyte attachment, and the surface morphology were investigated. The amount of the galactose ligands immobilized on the PET surface increased with the AAc polymer graft concentration. AFM images revealed that the surface roughness of the PET film increased after graft copolymerization with AAc, but did not change appreciably with the subsequent immobilization of the galactose ligands. At the surface carboxyl group concentration of about 0.56 micromol/cm(2) or galactose ligand concentration of about 0.51 micromol/cm(2), the hepatocyte culture on the galactosylated surface exhibited the optimum concentration and physiological functions and formed aggregates or spheroids after just 1 day of culture. The albumin and urea synthesis functions of these hepatocytes were comparable to or higher than those of the hepatocytes cultured on the collagen-modified PET substrates.     

Combining dynamic stretch and tunable stiffness to probe cell mechanobiology in vitro

Cells have the ability to actively sense their mechanical environment and respond to both substrate stiffness and stretch by altering their adhesion, proliferation, locomotion, morphology, and synthetic profile. In order to elucidate the interrelated effects of different mechanical stimuli on cell phenotype in vitro, we have developed a method for culturing mammalian cells in a two-dimensional environment at a wide range of combined levels of substrate stiffness and dynamic stretch. Polyacrylamide gels were covalently bonded to flexible silicone culture plates and coated with monomeric collagen for cell adhesion. Substrate stiffness was adjusted from relatively soft (G′ = 0.3 kPa) to stiff (G′ = 50 kPa) by altering the ratio of acrylamide to bis-acrylamide, and the silicone membranes were stretched over circular loading posts by applying vacuum pressure to impart near-uniform stretch, as confirmed by strain field analysis. As a demonstration of the system, porcine aortic valve interstitial cells (VIC) and human mesenchymal stem cells (hMSC) were plated on soft and stiff substrates either statically cultured or exposed to 10% equibiaxial or pure uniaxial stretch at 1Hz for 6 hours. In all cases, cell attachment and cell viability were high. On soft substrates, VICs cultured statically exhibit a small rounded morphology, significantly smaller than on stiff substrates (p<0.05). Following equibiaxial cyclic stretch, VICs spread to the extent of cells cultured on stiff substrates, but did not reorient in response to uniaxial stretch to the extent of cells stretched on stiff substrates. hMSCs exhibited a less pronounced response than VICs, likely due to a lower stiffness threshold for spreading on static gels. These preliminary data demonstrate that inhibition of spreading due to a lack of matrix stiffness surrounding a cell may be overcome by externally applied stretch suggesting similar mechanotransduction mechanisms for sensing stiffness and stretch.     

Increased mechanosensitivity of cells cultured on nanotopographies

Enhancing cellular mechanosensitivity is recognized as a novel tool for successful musculoskeletal tissue engineering. We examined the hypothesis that mechanosensitivity of human mesenchymal stem cells (hMSCs) is enhanced on nanotopographic substrates relative to flat surfaces. hMSCs were cultured on polymer-demixed, randomly distributed nanoisland surfaces with varying island heights and changes in intracellular calcium concentration, [Ca²⁺]_i, in response to fluid flow induced shear stress were quantifide. Stem cells cultured on specific scale nanotopographies displayed greater intracellular calcium responses to fluid flow. hMSCs cultured on 10–20 nm high nanoislands displayed a greater percentage of cells responding in calcium relative to cells cultured on flat control, and showed greater average [Ca²⁺]_i increase relative to cells cultured on other nanoislands (45–80 nm high nanoislands). As [Ca²⁺]_i is an important regulator of downstream signaling, as well as proliferation and differentiation of hMSCs, this observation suggests that specific scale nanotopographies provide an optimal milieu for promoting stem cell mechanotransduction activity. That mechanical signals and substrate nanotopography may synergistically regulate cell behavior is of significant interest in the development of regenerative medicine protocols.     

Surface functionalization of polypyrrole film with glucose oxidase and viologen

A surface modification technique was developed for the functionalization of polypyrrole (PPY) film with glucose oxidase (GOD) and viologen moieties. The PPY film was first graft copolymerized with acrylic acid (AAc) and GOD was then covalently immobilized through the amide linkage formation between the amino groups of the GOD and the carboxyl groups of the grafted AAc polymer chains in the presence of a water-soluble carbodiimide. Viologen moieties could also be attached to the PPY film via graft-copolymerization of vinyl benzyl chloride with the PPY film surface followed by reaction with 4,4'-bipyridine and alpha,alpha'-dichloro-p-xylene. X-ray photoelectron spectroscopy (XPS) was used to characterize the PPY films after each surface modification step. Increasing the AAc graft concentration would allow a greater amount of GOD to be immobilized but this would decrease the electrical conductivity of the PPY film. The activity of the immobilized GOD was compared with that of free GOD and the kinetic effects were also studied. The immobilized GOD was found to be less sensitive to temperature deactivation as compared to the free GOD. The results showed that the covalent immobilization technique offers advantages over the technique involving the entrapment of GOD in PPY films during electropolymerization. The presence of viologen in the vicinity of the immobilized GOD also enabled the GOD-catalyzed oxidation of glucose to proceed under UV irradiation in the absence of O(2).     

Adsorption of plasmid DNA onto N,N'- (dimethylamino)ethyl-methacrylate graft-polymerized poly-L-lactic acid film surface for promotion of in-situ gene delivery

The surface of biodegradable poly-L-lactic acid (PLLA) film was modified with N,N'-(dimethylamino)ethyl-methacrylate (DMAEMA) via UV-induced graft copolymerization, and plasmid DNA molecules were adsorbed onto the surface of modified PLLA film by electrostatic interactions with cationic DMAEMA polymer. We characterized the structure of the modified PLLA film surface by Fourier transform infrared attenuated total reflection (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The weight-average molecular weight (Mw) of grafted DMAEMA polymer chains was estimated from the elution time of gel filtration chromatography. C.I. Acid Orange 7 dyeing results indicated that graft density of DMAEMA on PLLA film increased with the UV irradiation time and then reached a saturated value. DNA adsorption density was proportioned to graft density of DMAEMA. Mouse fibroblast L929 cell line was cultured on modified PLLA films, and cell viability and gene transfection efficiency were monitored after 2 days culture. It was found that the DMAEMA grafted PLLA film had obvious cytotoxicity to the cells. On the contrary, cytotoxicity of the surface was highly decreased after adsorption with plasmid DNA. This DNA adsorbed DMAEMA modified PLLA showed the ability to deliver DNA into mammalian cells cultured on the surface with high-transfection efficiency at a low DNA amount. The present results suggest that the DMAEMA grafted PLLA has potentiality to be used as a safe and effective gene delivery system in gene-activated materials.     

Osteostimulation scaffolds of stem cells: BMP‐7‐derived peptide‐decorated alginate porous scaffolds promote the aggregation and osteo‐differentiation of human mesenchymal stem cells

The scaffolds for stem cell‐based bone tissue engineering should hold the ability to guide stem cells osteo‐differentiating. Otherwise, stem cells will differentiate into unwanted cell types or will form tumors in vivo. Alginate, a natural polysaccharide with great biocompatibility, was widely used in biomedical applications. However, the limited bioactivity and poor osteogenesis capability of pristine alginate hampered its further application in tissue engineering. In this work, a bone forming peptide‐1 (BFP‐1), derived from bone morphogenetic protein‐7, was grafted to alginate polymer chains to prepare peptide‐decorated alginate porous scaffolds (pep‐APS) for promoting osteo‐differentiation of human mesenchymal stem cells (hMSCs). SEM images of pep‐APS exhibited porous structure with about 90% porosity (pore size 100–300 μm), which was appropriate for hMSCs ingrowth. The adhesion, proliferation and aggregation of hMSCs grown on pep‐APS were enhanced in vitro. Moreover, pep‐APS promoted the alkaline phosphatase (ALP) activity of hMSCs, and the osteo‐related genes expression was obviously up‐regulated. The immunochemical staining and western blot analysis results showed high expression level of OCN and Col1a1 in the hMSCs grown on pep‐APS. This work provided a facile and valid strategy to endow the alginate polymers themselves with specific bioactivity and prepare osteopromoting scaffold with enhanced osteogenesis ability, possessing potential applications in stem cell therapy and regenerative medicine.     

Fabrication of collagen hybridized elastic PLCL for tissue engineering

Biodegradable elastic poly(l-lactide-co-ε-caprolactone) (PLCL) (50:50) copolymer was blended with collagen (0.05, 0.1 and 0.2% w/w) in an acidic dioxane solution to form a collagen/PLCL hybrid material suitable for tissue engineering applications. Stability and dispersivity of collagen on collagen/PLCL hybrid films and collagen coated PLCL films under mechanical stress were determined by a collagen release test and water contact angle measurement. Hybrid films had a higher stability than collagen-coated PLCL films. Elastic recovery as well as high interconnectivity and uniform pore morphology of the hybrid scaffolds were not affected by the collagen concentration. Fibroblasts (NIH-3T3) cell culture test was performed for cell growth and viability evaluation. Collagen concentration had little affect on the initial cell adhesion after 4 h cell culture; but after 48 h cell culture, increased cell proliferation on the hybrid films was observed. The hybrid material can be applied as a scaffold for vessel and cartilage regeneration for mechano-active tissue engineering.     

Quantifying osteogenic cell degradation of silk biomaterials

The degradation of silk protein films by human mesenchymal stem cells (hMSCs), osteoblasts and osteoclasts, cells involved in osteogenic functions in normal and diseased bone, was assessed in vitro. The involvement of specific matrix metalloproteinases (MMPs) and integrin signaling in the degradation process was determined. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to quantitatively compare degradation by the different cell types using surface patterned silk films. Osteoblasts and osteoclasts demonstrated significant degradation of the silk films in vitro in comparison to the hMSCs and the film controls without cells. The osteoclasts degraded the silk films the most and also generated the highest level of MMPs 1 and 2. The osteoblasts upregulated integrins α5 and β1, while the osteoclasts upregulated integrins α2 and β1. There was significant contrast in responses on the silk matrices between osteogenic cells versus undifferentiated hMSCs to illustrate in vitro the role of cell type on matrix remodeling. These are important issues in matching biomaterial matrix features and studies in vitro to remodeling in vivo, in both normal and disease tissue systems. Cell populations and niche factors impact tissue regeneration, wound healing, physiological state, and the ability to better understand the role of different cell types is critical to overall regenerative outcomes.     

Regulation of cyclic longitudinal mechanical stretch on proliferation of human bone marrow mesenchymal stem cells

Mechanical stimulation is critical to both physiological and pathological states of living cells. Although a great deal of research has been done on biological and biochemical regulation of the behavior of bone marrow mesenchymal stem cells (MSCs), the influence of biomechanical factors on their behavior is still not fully documented. In this study, we investigated the modulation of mechanical stretch magnitude, frequency, and duration on the human marrow mesenchymal stem cells (hMSCs) proliferation by an in vitro model system using a mechanical stretch loading apparatus, and optimized the stretch regime for the proliferation of hMSCs. We applied 3-(4,5-dimethylthiazol-2-yl)- 2,5-diphenyl tetrasodium bromide (MTT) assay to estimate the overall proliferative effects of the stretch on hMSCs. We found that fibronectin coating increased adhesion to silicone chamber surface, however, it did not show significant effect on proliferation of hMSCs. A frequency of 1 Hz was more effective in stimulating hMSCs proliferation. At 1 Hz, 5% strain for 15, 30, 60 min, the significant increase of hMSCs proliferation was observed. Proliferation was enhanced at 1 Hz, 10% strain for 15, 30 min, while decreased for 60 min. At 1 Hz, 15% strain, 15 min stretch resulted in the decrease of proliferation, and 30 min and 60 min stretch showed an increased proliferation. Long time (12 and 24 h) strain application blocked the proliferation. These results indicate that mechanical stretch plays an important role in hMSCs growth and proliferation; an appropriate mechanical stretch regime could be a novel approach to promoting proliferation of hMSCs in vitro.     

Glass needle-mediated microinjection of macromolecules and transgenes into primary human mesenchymal stem cells

Human mesenchymal stem cells (hMSCs) are multipotent cells that can differentiate into various tissue types, including bone, cartilage, tendon, adipocytes, and marrow stroma, making them potentially useful for human cell and gene therapies. Our objective was to demonstrate the utility of glass needle-mediated microinjection as a method to deliver macromolecules (e.g. dextrans, DNA) to hMSCs for cell and molecular biological studies. hMSCs were isolated and cultured using a specific fetal bovine serum, prescreened for its ability to promote cell adherence, proliferation, and osteogenic differentiation. Successful delivery of Oregon Green-dextran via intranuclear microinjection was achieved, yielding a postinjection viability of 76 +/- 13%. Excellent short-term gene expression (63 +/- 11%) was achieved following microinjection of GFP-containing vectors into hMSCs. Higher efficiencies of short-term gene expression ( approximately 5-fold) were observed when injecting supercoiled DNA, pYA721, as compared with the same DNA construct in a linearized form, YA721. Approximately 0.05% of hMSCs injected with pYA721 containing both the GFP and neomycin resistance genes formed GFP-positive, drug-resistant colonies that survived >120 days. Injection of linearized YA721 resulted in 3.6% of injected hMSC forming drug-resistant colonies, none of which expressed GFP that survived 60-120 days. These studies demonstrate that glass needle-mediated microinjection can be used as a method of delivering macromolecules to hMSCs and may prove to be a useful technique for molecular and cell biological mechanistic studies and future genetic modification of hMSCs.     

Substrate stiffness regulates solubility of cellular vimentin

The intermediate filament protein vimentin is involved in the regulation of cell behavior, morphology, and mechanical properties. Previous studies using cells cultured on glass or plastic substrates showed that vimentin is largely insoluble. Although substrate stiffness was shown to alter many aspects of cell behavior, changes in vimentin organization were not reported. Our results show for the first time that mesenchymal stem cells (hMSCs), endothelial cells, and fibroblasts cultured on different-stiffness substrates exhibit biphasic changes in vimentin detergent solubility, which increases from nearly 0 to 67% in hMSCs coincident with increases in cell spreading and membrane ruffling. When imaged, the detergent-soluble vimentin appears to consist of small fragments the length of one or several unit-length filaments. Vimentin detergent solubility decreases when these cells are subjected to serum starvation, allowed to form cell–cell contacts, after microtubule disruption, or inhibition of Rac1, Rho-activated kinase, or p21-activated kinase. Inhibiting myosin or actin assembly increases vimentin solubility on rigid substrates. These data suggest that in the mechanical environment in vivo, vimentin is more dynamic than previously reported and its assembly state is sensitive to stimuli that alter cellular tension and morphology.     

Extracellular matrix protein mediated regulation of the osteoblast differentiation of bone marrow derived human mesenchymal stem cells

The biomimetic approach of tissue engineering exploits the favorable properties of the extracellular matrix (ECM), to achieve better scaffold performance and tissue regeneration. ECM proteins regulate cell adhesion and differentiation through integrin mediated signal transduction. In the present study, we have examined the role of ECM proteins such as collagen type I, fibronectin, laminin and vitronectin in regulating the proliferation and osteogenic differentiation of bone marrow derived human mesenchymal stem cells (hMSCs). hMSCs were grown on selected ECM protein treated tissue culture plates. The growth kinetics was assessed by calculating the doubling time of the cells on different ECM treated plates. The cells were directed to osteoblast lineage by growing them in osteogenic induction media for 21 day. Differentiation was evaluated at different time points by osteoblast differentiation associated gene expression, alkaline phosphatase (ALP) activity, histochemical staining for mineralized matrix and calcium quantification. The doubling time of hMSCs cultured on collagen type I was significantly low, which was followed by laminin and fibronectin treated plates. However, doubling time of hMSCs cultured on vitronectin treated plate was not significantly different than that of the untreated control. High ALP gene (ALPL) expression and associated enhancement of mineralization were observed on collagen type I, fibronectin and vitronectin treated plates. Collagen type I showed early onset of mineralization with high ALP activity and up-regulation of osteopontin, ALPL, bone sialoprotein and osteocalcin genes. Vitronectin also up-regulated these genes and showed the highest amount of calcium in the secreted mineral matrix. Therefore, we conclude that, ECM proteins indeed modified the growth patterns and induced the osteoblast differentiation of hMSCs. Our findings have significant implication for bone tissue engineering applications.     

The Effect of Extracellular Matrix Molecules on the in Vitro Behavior of Bovine Endothelial Cells

Extracellular matrix (ECM) is an important mediator of endothelial functions such as adhesion, spreading, migration, proliferation, and maintenance of differentiated functions. Attachment of cultured cells to tissue culture polystyrene (TCPS) is dependent on vitronectin which adsorbs onto the surface from the serum in the culture medium. Vitronectin (VN) will adsorb efficiently to TCPS even if the latter has been coated with another matrix molecule and blocked with albumin. This means that studies of the interactions of cells with individual coated ECM molecules will be confounded by the presence of adsorbed VN if serum is present in the culture medium. In this study, the adhesion, spreading, growth, and output of endogenous matrix molecules by bovine corneal endothelial (BCE) cells were measured on five different matrix substrates using medium which had been depleted of vitronectin to avoid such confounding effects. The same cell adhesion and spreading maxima were achieved on vitronectin, fibronectin (FN), laminin (LM), and types I and IV collagen (col I, col IV). The coating concentrations required to achieve these maxima, however, differed among the substrates, LM needing considerably higher concentrations than the other substrates for both maximal adhesion and spreading and FN needing higher concentrations for cell spreading. When cells were continuously passaged on each of the five substrates coated at concentrations optimal for cell spreading, no differences in cell proliferation rates or cell morphology were observed. Significant differences, however, were observed in the subcellular output of endogenous matrix molecules (FN, LM, col IV, and thrombospondin) between the different substrates. Col I was a poor substrate for the production of all ECM molecules tested over the 10 passages of the experiment, whereas col IV was a consistently good substrate. LM and FN substrates displayed differential effects on the output of different ECM molecules. VN was unique in that BCE cells at early passage on this substrate produced high levels of endogenous matrix molecules, whereas with continued passage on this substrate, a progressive decline in ECM secretion was observed. These results show that incorporation of individual molecules into the ECM by BCE cells in culture is significantly affected by the nature of the substratum. They further suggest that passage of endothelial cells in media containing serum (which results in coating of VN onto the substrate) may result in a progressive reduction of ECM output.     

Myoblast adhesion and proliferation on biodegradable polymer films with femtosecond laser‐fabricated micro through‐holes

Controlling cell adhesion and cell differentiation is necessary to fabricate a tissue with arbitrary properties for tissue engineering applications. A substrate with a porous structure as a cell scaffold allows the diffusion of the cell culture medium through the scaffold. In this work, we show that the femtosecond laser fabricated micro through‐holes in biodegradable polymer films, enhance myoblast adhesion, and accelerates proliferation and differentiation. ChR2‐C2C12 and UT‐C2C12 cells were seeded on the films with micro through‐holes each fabricated by a single femtosecond laser pulse. Cell adhesion was enhanced on films with holes fabricated by laser irradiation. In addition, cell proliferation was accelerated on films with micro through‐holes that penetrate the film, compared to on films with micro craters that do not penetrate the film. On films with arrays consisting of micro through‐holes, cells aligned along the arrays and cell fusion was enhanced, indicating the acceleration of cell differentiation.     

Layer-by-layer films made from extracellular matrix macromolecules on silicone substrates

The layer-by-layer (LbL) technique has been widely used to produce nanofilms for biomedical applications. Naturally occurring polymers such as ECM macromolecules are attractive candidates for LbL film preparation. In this study, we assessed the build-up of type I collagen (Col1)/chondroitin sulfate (CS) or Col1/Heparin (HN) on polydimethylsiloxane (PDMS) substrates. The build-up was assessed by quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM). Integrin-mediated cell adhesion was assessed by studying the cytoskeletal organization of mammalian primary cells (chondrocytes) seeded on different end layers and number of layers. Data generated from the QCM-D observations showed a consistent build-up of films with more adsorption in the case of Col1/HN. Col1/CS films were stable in media, whereas Col1/HN films were not. AFM analysis showed that the layers were fibrillar in structure for both systems and between 20 and 30 nm thick. The films promoted cell adhesion when compared with tissue culture plastic in serum-free media with cycloheximide. Crosslinking of the films resulted in constrained cell spreading and a ruffled morphology. Finally, beta1 integrin blocking antibodies prevented cell spreading, suggesting that cell adhesion and spreading were mediated mainly by interaction with the collagen fibrils. The ability to construct stable ECM-based films on PDMS has particular relevance in mechanobiology, microfluidics, and other biomedical applications.     

The effect of substrate and adsorbed proteins on adhesion, growth and shape of CaCo-2 cells

Extracellular matrix (ECM) proteins play a critical role in many cellular functions, from spreading, migration and proliferation to apoptosis. This role can be altered when proteins of the native ECM are adsorbed to different substrates which cause structural modifications that can influence their biological function. The effects on CaCo-2 cells of laminin-1, fibronectin, collagen-1 and ECM gel adsorbed to glass and to tissue culture polystyrene (PS) were compared in terms of adhesion, proliferation, shapes and spreading of cells in culture. Significant differences between glass and PS surfaces were observed for proliferation and cell shape. Protein surfaces prepared on PS substrates had, in most cases, more pronounced effects on cells than uncoated PS, especially if coated by collagen-1. Adsorbed ECM gel was the most adhesive for cells, but its effect on cell proliferation was not notably different from the controls (glass or PS). These findings indicate that the choice of the substrate can have a significant effect on experimental results and should be taken into consideration when comparing results obtained on different surfaces.     

Adhesion,proliferation, and differentiation of mesenchymal stem cells on RGD nanopatterns of varied nanospacings

The present report is an extension of our preceding publication in Biomaterials (2013) entitled “Effect of RGD nanospacing on differentiation of stem cells.” Cell-adhesive peptide arginine-glycine-aspartate (RGD) was nanopatterned on a non-fouling poly(ethylene glycol) (PEG) hydrogel, and mesenchymal stem cells (MSCs) derived from rat bone marrow were cultured on the patterned surfaces at nanospacings from 37 to 124 nm. Cell adhesion parameters such as spreading areas varied with RGD nanospacings significantly. The differences were well observed at both the first and eighth days, which confirmed the persistence of this nanospacing effect on our nanopatterns. The proliferation rate also varied with the nanospacings. Osteogenic and adipogenic inductions were undertaken, and a significant influence of RGD nanospacing on stem cell differentiation was found. The effect on differentiation cannot be simply interpreted by differences in cell adhesion and proliferation. We further calculated the fractions of single, coupled, and multiple cells on those nanopatterns, and ruled out the possibility that the extent of cell-cell contact determined the different differentiation fractions. Accordingly, we reinforced the idea that RGD nanospacing might directly influence stem cell differentiation.     

PHBHHx膜表面亲水改性及其与神经干细胞生物相容性

对羟基丁酸-羟基己酸共聚酯(PHBHHx)膜进行表面改性,研究神经干细胞(NSCs)在改性后的PHBHHx膜表面的贴附、增殖及分化情况,为开发新型脑组织工程支架材料奠定基础。采用溶剂挥发法制备PHBHHx膜,扫描电镜观察其表面性状;分别通过脂肪酶处理,NaOH处理的方法对PHBHHx膜进行表面改性,测量接触角以检测膜表面亲水性。分离培养孕14.5 d大鼠胚胎大脑皮质NSCs,接种在表面改性后的PHBHHx膜表面进行体外培养,扫描电镜观察膜表面细胞形态,MTT法检测细胞活力,免疫细胞化学染色观察NSCs存活和分化情况。结果显示,与未处理的PHBHHx膜相比,脂肪酶、NaOH处理能够显著提高PHBHHx膜表面亲水性,增加NSCs在PHBHHx膜表面贴附数量;NSCs在改性后的PHBHHx膜表面能够良好地存活并分化为神经元和胶质细胞。结果提示PHBHHx膜表面碱处理通过提高材料表面亲水性和粗糙程度,增加其与NSCs的生物相容性,改性后的PHBHHx材料是一种非常有潜力的新型脑组织工程支架材料,有望在NSCs移植修复脑损伤中发挥作用。