Structural characterization of the N-terminal mineral modification domains from the molluscan crystal-modulating biomineralization proteins, AP7 and AP24

The AP7 and AP24 proteins represent a class of mineral-interaction polypeptides that are found in the aragonite-containing nacre layer of mollusk shell (H. rufescens). These proteins have been shown to preferentially interfere with calcium carbonate mineral growth in vitro. It is believed that both proteins play an important role in aragonite polymorph selection in the mollusk shell. Previously, we demonstrated the 1-30 amino acid (AA) N-terminal sequences of AP7 and AP24 represent mineral interaction/modification domains in both proteins, as evidenced by their ability to frustrate calcium carbonate crystal growth at step edge regions. In this present report, using free N-terminal, C(alpha)-amide "capped" synthetic polypeptides representing the 1-30 AA regions of AP7 (AP7-1 polypeptide) and AP24 (AP24-1 polypeptide) and NMR spectroscopy, we confirm that both N-terminal sequences possess putative Ca (II) interaction polyanionic sequence regions (2 x -DD- in AP7-1, -DDDED- in AP24-1) that are random coil-like in structure. However, with regard to the remaining sequences regions, each polypeptide features unique structural differences. AP7-1 possesses an extended beta-strand or polyproline type II-like structure within the A11-M10, S12-V13, and S28-I27 sequence regions, with the remaining sequence regions adopting a random-coil-like structure, a trait common to other polyelectrolyte mineral-associated polypeptide sequences. Conversely, AP24-1 possesses random coil-like structure within A1-S9 and Q14-N16 sequence regions, and evidence for turn-like, bend, or loop conformation within the G10-N13, Q17-N24, and M29-F30 sequence regions, similar to the structures identified within the putative elastomeric proteins Lustrin A and sea urchin spicule matrix proteins. The similarities and differences in AP7 and AP24 N-terminal domain structure are discussed with regard to joint AP7-AP24 protein modification of calcium carbonate growth.     

Structural features that distinguish kinetically distinct biomineralization polypeptides

AP7 and AP24 are mollusk shell proteins which are responsible for aragonite polymorph formation and stabilization within the nacre layer of the Pacific red abalone, Haliotis rufescens. It is known that the 30-AA N-terminal mineral modification domains of both proteins (AP7N, AP24N) possess identical multifunctional mineralization capabilities within in vitro assays but differ in terms of rate kinetics, with AP24N > AP7N. In this report, we identify previously unreported molecular features of AP24N and contrast the lowest energy polypeptide backbone structures of AP24N (planar configuration) with that of AP7N ("bent paper clip" configuration) using NMR data and simulated annealing molecular dynamics structure refinement. Like AP7N, we find that AP24N possesses an unfolded conformation, can sequester Ca(II) and other multivalent metal ions, can adsorb onto or within calcite crystals, and possesses anionic and cationic electrostatic "pocket" regions on its molecular surfaces. However, AP24N has some unique features: greater conformational responsiveness to Ca(II), the tendency to form a more planar backbone configuration, and longer anionic and hydrogen-bonding donor/acceptor sequence blocks. We conclude that the presence of unfolded polypeptide conformation, electrostatic surface pockets, and interactive sequence clustering endow both AP7N and AP24N with similar features that lead to comparable effects on crystal morphology and nucleation. However, AP24N possesses longer anionic and hydrogen-bonding sequence clusters and exhibits a tendency to adopt a more planar backbone configuration than AP7N does. We believe that these features facilitate peptide-mineral, peptide-ion, or water cluster interactions, thereby enhancing the mineralization kinetics of AP24N over AP7N.     

Characterization of two molluscan crystal-modulating biomineralization proteins and identification of putative mineral binding domains

Ethylenediamine-tetraacetic acid extracted water-soluble matrix proteins in molluscan shells secreted from the mantle epithelia are believed to control crystal nucleation, morphology, orientation, and phase of the deposited mineral. Previously, atomic force microscopy demonstrated that abalone nacre proteins bind to growing step edges and to specific crystallographic faces of calcite, suggesting that inhibition of calcite growth may be one of the molecular processes required for growth of the less thermodynamically stable aragonite phase. Previous experiments were done with protein mixtures. To elucidate the role of single proteins, we have characterized two proteins isolated from the aragonitic component of nacre of the red abalone, Haliotis rufescens. These proteins, purified by hydrophobic interaction chromatography, are designated AP7 and AP24 (aragonitic protein of molecular weight 7 kDa and 24 kDa, respectively). Degenerate oligonucleotide primers corresponding to N-terminal and internal peptide sequences were used to amplify cDNA clones by a polymerase chain reaction from a mantle cDNA library; the deduced primary amino acid sequences are presented. Preliminary crystal growth experiments demonstrate that protein fractions enriched in AP7 and AP24 produced CaCO(3) crystals with morphology distinct from crystals grown in the presence of the total mixture of soluble aragonite-specific proteins. Peptides corresponding to the first 30 residues of the N-terminal sequences of both AP7 and AP24 were generated. The synthetic peptides frustrate the progression of step edges of a growing calcite surface, indicating that sequence features within the N-termini of AP7 and AP24 include domains that interact with CaCO(3). CD analyses demonstrate that the N-terminal peptide sequences do not possess significant percentages of alpha-helix or beta-strand secondary structure in solution. Instead, in both the presence and absence of Ca(II), the peptides retain unfolded conformations that may facilitate protein-mineral interaction.     

Hints of nonhierarchical folding of acidic fibroblast growth factor

We have analyzed by circular dichroism (CD) and proton nuclear magnetic resonance (NMR) the helical propensity of the all-beta protein acidic fibroblast growth factor (aFGF) and two peptides corresponding to beta-strand 8 (beta8 peptide, amino acids 95-107) and the beta-strand 8/turn/beta-strand 9 hairpin (beta8/9 peptide, amino acids 95-114), which has been involved in receptor binding. A secondary structure prediction of aFGF carried out by several procedures labels the 95-104 sequence as predominantly alpha-helical. A titration of aFGF with 2,2,2-trifluoroethanol (TFE) induces a change in the far-UV CD spectrum of the protein giving rise to a prominent alpha-helical shape (22% alpha-helix). The cooperativity of the transition and the moderate TFE concentrations used (midpoint at 24%) suggest that the effect of TFE is specific. Moreover, a titration performed at pH 2 yields a higher amount of alpha-helix (55%) at a smaller TFE concentration. Synthetic peptides containing the beta8 and beta8/9 sequences display a random coil conformation at pH 7 but acquire alpha-helical structure in the presence of TFE, methanol, and SDS micelles. At pH below 3.0 a significant amount (20-30%) of alpha-helical conformation is present in both the beta8 and beta8/9 peptides even in the absence of other solvent additives. The secondary structure of the peptides was determined by proton nuclear magnetic resonance (1H NMR). These results suggest that the 95-114 sequence of aFGF has helical propensity and that the protein may fold nonhierarchically in the early steps of folding, acquiring its final beta-structure by a later interaction with the rest of the polypeptide.     

Conformational analyses of a partially-folded bioactive prodomain of human furin

The 81-residue multifunctional prodomain of human furin adopts only a partially-folded conformational state under near physiological conditions. By use of NMR spectroscopy, we demonstrate that the N-terminal residues 1-46 of the prodomain in 50% trifluoroethanol (TFE) populates backbone conformations containing a short helix, a beta-strand and a helix-loop-helix super-secondary structure with elements of tertiary interactions. (15)N NMR relaxation measurements indicate that the helix-loop-helix region has similar motional characteristics in the fast picosecond to nanosecond timescales. On the other hand, the intervening segment (residues 47-65) is predominantly unstructured with a long and highly flexible region surrounding the protease 'activation loop' followed by a partially helical segment in the C-terminal end. Interestingly, the helix-loop-helix "fold" was found to be populated even when excised out of the full-length prodomain, since a peptide fragment derived from residues Pro16-Arg49 can also form the helix-loop-helix structure in aqueous solution in the absence of TFE. Structure analyses reveal that two helices orient in an antiparallel fashion directed by the sharing of hydrophobic residues involved in helix-capping interactions. Very importantly, a positively-charged Lys residue replacing His43 in the 16-49 fragment imparts stability to the super-secondary structure at both acidic and neutral pH, while a hydrophobic residue Leu at position 43 appears to destabilize the helical conformation in the 31-44 region. As such, this study provides valuable insights into the structural properties of the furin prodomain in relation to its role in the folding of the furin zymogen and its inhibitory action toward furin.     

NMR structure of an archaeal homologue of ribonuclease P protein Rpp29

A protein component of the Archaeoglobus fulgidus RNase P was expressed in Escherichia coli, purified, and structurally characterized using multidimensional NMR methods. The dominant structural feature of this 11 kDa protein is a sheet of six antiparallel beta-strands, wrapped around a core of conserved hydrophobic amino acids. Amide proton exchange and (15)N relaxation rate data provide evidence that the first 16 residues of the protein, located before the start of the first beta-strand, and the last 24 residues, located past the end of the last beta-strand, are relatively flexible; this contrasts with the relatively rigid and well-defined structure of the beta-sheet. Amino acid sequence comparisons among a diverse set of species indicate that the A. fulgidus protein is homologous to the human RNase P protein Rpp29, yeast RNase P protein Pop4, and a known archaeal RNase P protein from Methanobacter thermoautotrophicus; conserved hydrophobic residues indicate that the homologous protein in each of these species contains a similar beta-sheet structure. Conserved surface residues located in the loop connecting strands beta2 and beta3, the loop connecting strands beta4 and beta5, and in the flexible N- and C-terminal tails are most likely to have specific interactions with the RNA and other proteins of RNase P. The structural model of an RNase P protein component provided by the present work provides an essential step toward eventually understanding the overall architecture of this complex enzyme and the mechanism by which it performs its functions.     

The SH3 domain of a M7 interacts with its C-terminal proline-rich region

Myosins play essential roles in migration, cytokinesis, endocytosis, and adhesion. They are composed of a large N-terminal motor domain with ATPase and actin binding sites and C-terminal neck and tail regions, whose functional roles and structural context in the protein are less well characterized. The tail regions of myosins I, IV, VII, XII, and XV each contain a putative SH3 domain that may be involved in protein-protein interactions. SH3 domains are reported to bind proline-rich motifs, especially "PxxP" sequences, and such interactions serve regulatory functions. The activity of Src, PI3, and Itk kinases, for example, is regulated by intramolecular interactions between their SH3 domain and internal proline-rich sequences. Here, we use NMR spectroscopy to reveal the structure of a protein construct from Dictyostelium myosin VII (DdM7) spanning A1620-T1706, which contains its SH3 domain and adjacent proline-rich region. The SH3 domain forms the signature beta-barrel architecture found in other SH3 domains, with conserved tryptophan and tyrosine residues forming a hydrophobic pocket known to bind "PxxP" motifs. In addition, acidic residues in the RT or n-Src loops are available to interact with the basic anchoring residues that are typically found in ligands or proteins that bind SH3 domains. The DdM7 SH3 differs in the hydrophobicity of the second pocket formed by the 3(10) helix and following beta-strand, which contains polar rather than hydrophobic side chains. Most unusual, however, is that this domain binds its adjacent proline-rich region at a surface remote from the region previously identified to bind "PxxP" motifs. The interaction may affect the orientation of the tail without sacrificing the availability of the canonical "PxxP"-binding surface.     

A C-RING-like domain participates in protein self-assembly and mineral nucleation

AP7 is a nacre-associated protein of the mollusk shell that forms supramolecular assemblies that nucleate single-crystal aragonite in vitro. AP7 possesses two major sequence regions: a random coil 30-amino acid N-terminal domain (AP7N) and a partially disordered 36-amino acid C-terminal domain (AP7C) that exhibits imperfect sequence homology to the C subclass of the intracellular RING domain family. We report here new findings that implicate the C-RING domain in AP7-mediated supramolecular assembly and single-crystal mineral formation. AP7 protein spontaneously self-assembles over a pH range of 4-9 and is monomeric at pH >9.5. AP7N and AP7C both oligomerize over the pH range of 4-9, with the AP7C sequence closely resembling AP7 in terms of particle morphology and size. In vitro mineralization experiments demonstrate that both AP7N and AP7C form supramolecular assemblies that nucleate single-crystal calcium carbonates. Comparison of previously published nuclear magnetic resonance-based structures of AP7C and AP7N reveals the significant presence of complementary anionic-cationic electrostatic molecular surfaces on AP7C that are not found on AP7N, and this may explain the noted discrepancies between the two domains in terms of self-assembly and single-crystal nucleation. We conclude that the C-RING-like sequence is an important site for AP7 self-association and mineral nucleation, and this represents the first known instance of a RING-like sequence performing these functions within an extracellular protein.     

Conformational changes in pediocin AcH upon vesicle binding and approximation of the membrane-bound structure in detergent micelles.

Pediocin AcH is a 44-residue antimicrobial peptide with bactericidal potency against Gram-positive bacteria such as Listeria. It belongs to a family of bacteriocins that, when membrane-associated, is predicted to contain beta-sheet and alpha-helical regions. All bacteriocins in this family have a conserved N-terminal disulfide bond. An additional C-terminal disulfide bond in pediocin AcH is thought to confer enhanced potency and broader specificity range against sensitive bacteria. The C-terminal disulfide bond may also affect the conformation of the C-terminus. The secondary structures of pediocin AcH in aqueous solution and vesicles from susceptible cells, as well as the ability of trifluoroethanol (TFE) and detergent systems to induce secondary structures like those induced in vesicles, were studied by circular dichroism (CD) spectroscopy. Like related peptides, pediocin AcH was highly unordered in aqueous solution, 56%. However, it also contained 20% beta-strand and 15% beta-turn structures. Upon complete binding to vesicles, 32% alpha-helical structure formed, the unordered structure decreased to 32%, and the beta-strand and beta-turn structures remained largely unchanged. Thus, a betaalpha domain structure formed in vesicles. The helical structure likely forces the C-terminal tail to loop back on the helix so that the C24-C44 disulfide bond can form. Detergent micelles were superior to TFE in their ability to induce secondary structural fractions in pediocin AcH comparable to those observed in vesicles. This demonstrates the importance of a hydrocarbon-water interface to pediocin AcH structure induction and suggests that it is preferable to use detergent micelles as solvents in NMR studies of pediocin AcH structure.     

Low-ultraviolet circular dichroism spectroscopy of sequential peptides 1-63, 64-95, 96-128, and 129-168 derived from myelin basic protein of rabbit

Four sequential peptides (sequences 1-63, 64-95, 96-128, and 129-168) derived from rabbit myelin basic protein by thrombic cleavage were examined by low-ultraviolet circular dichroism spectroscopy in 0.5 mM tris(hydroxymethyl)aminomethane hydrochloride (pH approximately 7.2) containing 0-92% trifluoroethanol (TFE). In the absence of the alcohol, all of the peptides contained a significant amount (17-29%) of beta-structure. In the presence of relatively low concentrations (up to 30%) of TFE, all of the peptides except 96-128 adopted considerable alpha-helix (16-33%). This involved a transition from the beta-structure in peptide 1-63 and transitions from the nonordered structure in peptides 1-63, 64-95, and 129-168. Furthermore, additional alpha-helix formed in peptide 1-63 between 30% and 92% TFE at the expense of nonordered structure, whereas the alpha-helix formation above 50% TFE in peptide 129-168 resulted largely from a beta-structure----alpha-helix transition. With the exception of the 129-168 peptide, approximately 65-100% of the maximum level of beta-structure persisted throughout the entire range of TFE concentration. In the case of peptide 129-168, however, most of the beta-structure was converted to alpha-helix and nonordered structure at 75% TFE. While the present results support our previous assignments of beta-structure- and alpha-helix-forming regions to specific amino acid sequences of the basic protein, they also demonstrate that the beta-structure----alpha-helix transitions evidenced at various concentrations of TFE were influenced to a considerable degree by the length of the peptide, presumably due to the presence or absence of interactions between noncontiguous portions of the myelin basic protein polypeptide chain.     

Crystal structure of archaeal ribonuclease P protein Ph1771p from Pyrococcus horikoshii OT3: an archaeal homolog of eukaryotic ribonuclease P protein Rpp29

Ribonuclease P (RNase P) is the endonuclease responsible for the removal of 5' leader sequences from tRNA precursors. The crystal structure of an archaeal RNase P protein, Ph1771p (residues 36-127) from hyperthermophilic archaeon Pyrococcus horikoshii OT3 was determined at 2.0 A resolution by X-ray crystallography. The structure is composed of four helices (alpha1-alpha4) and a six-stranded antiparallel beta-sheet (beta1-beta6) with a protruding beta-strand (beta7) at the C-terminal region. The strand beta7 forms an antiparallel beta-sheet by interacting with strand beta4 in a symmetry-related molecule, suggesting that strands beta4 and beta7 could be involved in protein-protein interactions with other RNase P proteins. Structural comparison showed that the beta-barrel structure of Ph1771p has a topological resemblance to those of Staphylococcus aureus translational regulator Hfq and Haloarcula marismortui ribosomal protein L21E, suggesting that these RNA binding proteins have a common ancestor and then diverged to specifically bind to their cognate RNAs. The structure analysis as well as structural comparison suggested two possible RNA binding sites in Ph1771p, one being a concave surface formed by terminal alpha-helices (alpha1-alpha4) and beta-strand beta6, where positively charged residues are clustered. A second possible RNA binding site is at a loop region connecting strands beta2 and beta3, where conserved hydrophilic residues are exposed to the solvent and interact specifically with sulfate ion. These two potential sites for RNA binding are located in close proximity. The crystal structure of Ph1771p provides insight into the structure and function relationships of archaeal and eukaryotic RNase P.     

Solution structure of switch Arc,a mutant with 3(10) helices replacing a wild-type beta-ribbon

Adjacent N11L and L12N mutations in the antiparallel beta-ribbon of Arc repressor result in dramatic changes in local structure in which each beta-strand is replaced by a right-handed helix. The full solution structure of this "switch" Arc mutant shows that irregular 3(10) helices compose the new secondary structure. This structural metamorphosis conserves the number of main-chain and side-chain to main-chain hydrogen bonds and the number of fully buried core residues. Apart from a slight widening of the interhelical angle between alpha-helices A and B and changes in side-chain conformation of a few core residues in Arc, no large-scale structural adjustments in the remainder of the protein are necessary to accommodate the ribbon-to-helix change. Nevertheless, some changes in hydrogen-exchange rates are observed, even in regions that have very similar structures in the two proteins. The surface of switch Arc is packed poorly compared to wild-type, leading to approximately 1000A(2) of additional solvent-accessible surface area, and the N termini of the 3(10) helices make unfavorable head-to-head electrostatic interactions. These structural features account for the positive m value and salt dependence of the ribbon-to-helix transition in Arc-N11L, a variant that can adopt either the mutant or wild-type structures. The tertiary fold is capped in different ways in switch and wild-type Arc, showing how stepwise evolutionary transformations can arise through small changes in amino acid sequence.     

Structure analysis of a fusogenic peptide sequence from the sea urchin fertilization protein bindin

The structure of "B18", an 18-residue fusogenic peptide from the sea urchin fertilization protein bindin, was investigated in several membrane-mimicking environments with circular dichroism and nuclear magnetic resonance spectroscopy. The fully conserved peptide sequence represents the minimal functional part of the 24 kDa protein, which can bind to membranes and induce fusion of lipid vesicles. The B18 peptide undergoes a coil-helix transition in the presence of TFE, showing a transient tendency to self-associate. Its NMR structure in 30% TFE exhibits two helical regions at either side, connected by a flexible loop. In DPC and SDS detergent micelles, this loop becomes distinctly bent, presumably due to the high degree of curvature of the micelles. The loop contains a histidine-rich motif for binding zinc, which is required for the fusogenic function of the peptide. Therefore, we monitored the structural response of B18 and of recombinant bindin toward this ion. Like TFE, and in a mutually cooperative manner, zinc induces a partially helical structure in both the peptide and the protein. Complex formation via the histidine residues rigidifies the flexible loop and is accompanied by self-association of the molecules. The data suggest that the zinc-bound functional state is a continuous amphipathic alpha-helix, bearing some resemblance to a leucine zipper. Two hydrophobic patches on one face could favorably penetrate into a membrane, while two arginines on the other face could interact with lipid phosphate groups. The three-dimensional model of the B18 sequence thus contributes to a better understanding of peptide-induced vesicle fusion in general, and of the lipid-protein interactions of sperm bindin in particular.     

Secondary structure prediction for the spectrin 106-amino acid segment, and a proposed model for tertiary structure

A collective secondary structure prediction for the human erythrocyte spectrin 106-residue repeat segment is developed, based on the sequences of nine segments that have been reported in the literature, utilizing a consensus of several secondary structure prediction methods for locating turn regions. The analysis predicts a five-fold structure, with three alpha-helices and two beta-strand regions, and differs from previous models on the lengths of the helices and the existence of beta-strand structure. We also demonstrate that this structural motif can be folded into tertiary structures that satisfy the experimental spectrin data and several general principles of protein organization.     

Activity and conformational changes of horseradish peroxidase in trifluoroethanol.

The effect of trifluoroethanol (TFE) on horseradish peroxidase (HRP) was determined using activity assay and spectral analysis including optical absorption, circular dichroism (CD), and intrinsic fluorescence. The enzyme activity increased nearly twofold after incubation with 5-25% (v/v) concentrations of TFE. At these TFE concentrations, the tertiary structure of the protein changed little, while small changes occurred at the active site. Further increases in the TFE concentration (25-40%) decreased the enzyme activity until at 40% TFE the enzyme was completely inactivated. The alpha-helix content of the protein increased at high TFE concentrations, while near-UV CD, Soret CD, and intrinsic fluorescence indicated that the tertiary structure was destroyed. Polyacrylamide gel electrophoresis results indicated that the surface charge of the enzyme was changed at TFE concentrations greater than 20%, and increasing concentrations of TFE reduced the enzyme molecular compactness. A scheme for the unfolding of HRP in TFE was suggested based on these results. The kinetics of absorption change at 403 nm in 40% TFE followed a two-phase course. Finally, HRP incubated with TFE was more sensitive to urea denaturation, which suggested that the main effect of TFE on HRP was the disruption of hydrophobic interactions.     

Rapid assessment of contact-dependent secondary structure propensity: relevance to amyloidogenic sequences

We have previously demonstrated that calculation of contact-dependent secondary structure propensity (CSSP) is highly sensitive in detecting non-native beta-strand propensities in the core sequences of known amyloidogenic proteins. Here we describe a CSSP method based on an artificial neural network that rapidly and accurately quantifies the influence of tertiary contacts (TCs) on secondary structure propensity in local regions of protein sequences. The present method exhibited 72% accuracy in predicting the alternate secondary structure adopted by chameleon sequences located in highly disparate TC regions. Analysis of 1930 nonhomologous protein domains reveals that the alpha-helix and the beta-strand largely share the same sequence context, and that tertiary context is a major determinant of the native conformation. Conversely, it appears that the propensity of random coils for either the alpha-helix or the beta-strand is largely invariant to tertiary effects. The present CSSP method successfully reproduced the amyloidogenic character observed in local regions of the human islet amyloid polypeptide (hIAPP). Furthermore, CSSP profiles were strongly correlated (r = 0.76) with the observed mutational effects on the aggregation rate of acylphosphatase. Taken together, these results provide compelling evidence in support of the present CSSP approach as a sensitive probe useful for analysis of full-length proteins and for detection of core sequences that may trigger amyloid fibril formation. The combined speed and simplicity of the CSSP method lends itself to proteome-wide analysis of the amyloidogenic nature of common proteins.     

Intrinsic selectivity in binding of matrix metalloproteinase-7 to differently charged lipid membranes

We provide evidence that matrix metalloproteinase-7 (MMP-7) interacts with anionic, cationic and neutral lipid membranes, although it interacts strongest with anionic membranes. While the catalytic activity of the enzyme remains unaffected upon binding to neutral and negatively charged membranes, it is drastically impaired upon binding to the positively charged membranes. The structural data reveal that the origin of these features lies in the "bipolar" distribution of the electrostatic surface potentials on the crystallographic structure of MMP-7.     

Insights into stabilizing weak interactions in designed peptide beta-hairpins

beta-Hairpin peptides (two anti-parallel strands linked by a reverse beta-turn) have emerged as the simplest systems for probing weak interactions in beta-sheet folding. We describe a model 16-residue hairpin system (peptide beta1: KKYTVSINGKKITVSI) designed around the anti-parallel beta-sheet DNA binding motif of the Met repressor dimer in which two beta-strand sequences are linked through an Asn-Gly type I' beta-turn. The peptide is significantly folded in aqueous solution and has a well-defined conformation as evident from an abundance of NOE data. We review a number of analogues of beta1 designed to estimate the energetic contribution of electrostatic (ion pairing) interactions to hairpin stability, to examine effects of cooperativity and preorganization in determining the energetics of weak interactions, and examine the effects on stability and conformation of incorporation of a three-histidine motif on one face of the hairpin capable of zinc complexation.     

Identification and structural characterization of an unusual RING-like sequence within an extracellular biomineralization protein, AP7

The RING or Really Interesting New Gene represents a family of eukaryotic sequences that bind Zn (II) ions and participate in intracellular processes involving protein-protein interaction. Although found in over 400 different proteins, very little is known regarding the structure-function properties of these domains because of the aggregation problems associated with RING sequences. To augment this data set, we report an unusual 36 AA C-terminal sequence of an extracellular matrix mollusk shell protein, AP7, that exhibits partial homology to the RING family. This Cys, His-containing sequence, termed AP7C, binds Zn (II) and other multivalent ions, but does not utilize a tetracoordinate complexation scheme for binding such as that found in Zn (II) finger polypeptides. Moreover, unlike Zn (II) finger and RING domains, this 36 AA can fold into a relatively stable structure in the absence of Zn (II). This folded structure consists of three short helical segments (A, B, and C), with segments A and B separated by a 4 AA type I beta-turn region and segments B and C separated by a 7 AA loop-like region. Interestingly, the putative RING-like region, -RRPFHECALCYSI-, experiences slow conformational exchange between two structural states in solution, most likely in response to imido ring interconversion at P8 and P21. Poisson-Boltzmann solvation calculations reveal that the AP7C molecular surface possesses a cationic region near its N-terminus, which lies adjacent to the 30 AA mineral modification domain in the AP7 protein. Given that the AP7C sequence does not influence mineralization, it is probable that this cationic pseudo-RING region is utilized by the AP7 protein for other tasks such as protein-protein interaction within the mollusk shell matrix.     

The crystal structure of the fab fragment of the monoclonal antibody MAK33. Implications for folding and interaction with the chaperone bip

The Fab fragment of the murine monoclonal antibody, MAK33, directed against human creatine kinase of the muscle-type, was crystallized and the three-dimensional structure was determined to 2.9 A. The antigen-binding surface of MAK33 shows a convex overall shape typical for immunoglobulins binding large antigens. The structure allows us to analyze the environment of cis-prolyl-peptide bonds whose isomerization is of key importance in the folding process. These residues seem to be involved with not only domain stability but also seem to play a role in the association of heavy and light chains, reinforcing the importance of beta-strand recognition in antibody assembly. The structure also allows the localization of segments of primary sequence postulated to represent binding sites for the ER-specific chaperone BiP within the context of the entire Fab fragment. These sequences are found primarily in beta-strands that are necessary for interactions between the individual domains.