Lipid binding of the exchangeable apolipoprotein apolipophorin III induces major changes in fluorescence properties of tryptophans 115 and 130

The effect of lipid association on the local environment of the two tryptophan residues of Locusta migratoria apolipophorin III (apoLp-III) has been studied. In the lipid-free state, Trp115 in helix 4 is buried in the hydrophobic interior of the helix bundle, while Trp130 is located in a loop connecting helices 4 and 5. Fluorescence spectroscopy of single Trp mutants revealed an emission maximum (lambda(max)) of 321 nm for apoLp-III-W@115 (excitation 280 nm) which red-shifted to 327 nm upon binding to dimyristoylphosphatidylcholine (DMPC). ApoLp-III-W@130 displayed a lambda(max) of 338 nm while interaction with DMPC resulted in a blue shift to 331 nm. Quenching studies with KI and acrylamide revealed decreased accessibility to Trp115 compared to Trp130, while lipid binding induced a decrease in quenching of Trp130. Aromatic circular dichroism (CD) spectra showed that Trp vibronic transitions at 278, 286, and 294 nm for lipid-free apoLp-III were caused by Trp115. Upon lipid association, aromatic extrema are reversed in sign, becoming entirely negative with both Trp residues contributing to the vibronic transitions, implying restriction in side-chain mobility of these residues. Thus, lambda(max), quencher accessibility, and aromatic CD analysis indicate that Trp115 is much less solvent-exposed than Trp130. Differences in fluorescence properties of these residues are minimized in the lipid-bound state, a result of relocation of Trp115 and Trp130 into the lipid milieu. Thus, in addition to the hydrophobic faces of apoLp-III amphipathic alpha-helices, the loop region containing Trp130 comes in close contact with DMPC.     

Combined N- and C-terminal truncation of human apolipoprotein A-I yields a folded, functional central domain

A combined N- and C-terminal truncation variant of human apolipoprotein A-I (apoA-I) was designed, expressed in Escherichia coli, isolated, and characterized. Hydrodynamic experiments yielded a weight average molecular weight of 34000, indicating apoA-I-(44-186) exists in solution predominantly as a dimer. An axial ratio of 4.2 was calculated for the dimer based on sedimentation velocity experiments. Far-UV circular dichroism spectroscopy of apoA-I-(44-186) in buffer indicated the presence of 65% alpha-helix secondary structure. Guanidine hydrochloride denaturation experiments yielded a transition midpoint of 0.5 M for apoA-I-(44-186). ApoA-I-(44-186) induced solubilization of dimyristoylphosphatidylcholine vesicles at a rate comparable to that of full-length apoA-I, displayed lipoprotein binding ability, and was an acceptor of ABCA1-mediated cholesterol efflux from cultured macrophages. Fluorescence quenching studies with KI indicate that the three Trp residues in apoA-I-(44-186) are shielded from the aqueous environment. Taken together, the data indicate that lipid-free apoA-I-(44-186) adopts a folded conformation in solution that possesses lipid binding capability. The central region of apoA-I appears to adopt a globular amphipathic alpha-helix bundle organization that is stabilized by intramolecular and/or intermolecular helix-helix interactions. Lipid association likely results in a conformational adaptation wherein helix-helix contacts are substituted for helix-lipid interactions.     

An N-terminal three-helix fragment of the exchangeable insect apolipoprotein apolipophorin III conserves the lipid binding properties of wild-type protein

Apolipophorin III (apoLp-III) from the greater wax moth Galleria mellonella is an exchangeable insect apolipoprotein that consists of five amphipathic alpha-helices, sharing high sequence identity with apoLp-III from the sphinx moth Manduca sexta whose structure is available. To define the minimal requirement for apoLp-III structural stability and function, a C-terminal truncated apoLp-III encompassing residues 1-91 of this 163 amino acid protein was designed. Far-UV circular dichroism spectroscopy revealed apoLp-III(1-91) has 50% alpha-helix secondary structure content in buffer (wild-type apoLp-III 86%), increasing to essentially 100% upon interactions with dimyristoylphosphatidylcholine (DMPC). Guanidine hydrochloride denaturation studies revealed similar stability properties for wild-type apoLp-III and apoLp-III(1-91). Resistance to denaturation for both proteins increased substantially upon association with phospholipid. In the absence of lipid, wild-type apoLp-III was monomeric whereas apoLp-III(1-91) partly formed dimers and trimers. Discoidal apoLp-III(1-91)-DMPC complexes were smaller in diameter (13.5 nm) compared to wild-type apoLp-III (17.7 nm), and more molecules of apoLp-III(1-91) associated with the complexes. Lipid interaction revealed that apoLp-III(1-91) binds to modified spherical lipoprotein surfaces and efficiently transforms phospholipid vesicles into discoidal complexes. Thus, the first three helices of G. mellonella apoLp-III contain the basic features required for maintenance of the structural integrity of the entire protein.     

Interaction of the alpha-helices of apolipophorin III with the phospholipid acyl chains in discoidal lipoprotein particles: a fluorescence quenching study.

Quenching of tryptophan fluorescence by nitroxide-labeled phospholipids and nitroxide-labeled fatty acids was used to investigate the lipid-binding domains of apolipophorin III. The location of the Trp residues relative to the lipid bilayer was investigated in discoidal lipoprotein particles made with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine and five different single-Trp mutants of apoLp-III. A comparison of the quenching efficiencies of phospholipids containing nitroxide groups at the polar head, and at positions 5 and 16 of the sn-2 acyl chain, indicated that the protein is interacting with the acyl chains of the phospholipid along the periphery of the bilayer of the discoidal lipoprotein. N-Bromosuccinimide readily abolished 100% of the fluorescence of all Trp residues in the lipid-bound state. Larger quenching rates were observed for the Trp residues in helices 1, 4, and 5 than for those located in helices 2 and 3, suggesting differences between the interaction of these two groups of helices. However, the extent of Trp fluorescence quenching observed in lipoproteins made with any of the mutants was comparable to that reported for deeply embedded Trp residues, suggesting that all Trp residues interact with the phospholipid acyl chains. This study provides the first experimental evidence of a massive interaction of the alpha-helices of apoLp-III with the phospholipid acyl chains in discoidal lipoproteins. The extent of interaction deduced is consistent with the apolipoprotein adopting a highly extended conformation.     

Fluorescence spectroscopy of single tryptophan mutants of apolipophorin-III in discoidal lipoproteins of dimyristoylphosphatidylcholine

The structure of the exchangeable apolipoprotein, apolipophorin-III from Locusta migratoria, apoLp-III, is described as a bundle of five amphipathic alpha-helices. To study the interaction of each of the helices of apoLp-III with a lipid surface, we designed five single-Trp mutants, each containing a Trp residue in a different alpha-helix. The Trp residues were located in the nonpolar domains of the amphipathic alpha-helices. The kinetics of the spontaneous interaction of the mutants with dimyristoylphosphatidylcholine (DMPC) indicated that all mutants behaved as typical exchangeable apolipoproteins. Circular dichroism in the far-UV indicated that all proteins have a high and similar helical content in the lipid-bound state. The interaction of the Trp residues with the lipid surface was investigated in recombinant lipoprotein particles made with DMPC. The properties of the Trp residues were investigated by fluorescence spectroscopy. These studies showed major changes in the spectroscopic properties of the Trp residues upon binding to lipid. These changes are observed with all single-Trp mutants, indicating that a major conformational change, which affects the properties of all helices, takes place upon binding to lipid. The position of the fluorescence maximum, the quenching efficiency of acrylamide as determined by steady-state and time-resolved fluorescence, and the fluorescence lifetimes of the single-Trp mutants suggest that helices 1, 4, and 5 interact with the nonpolar domains of the lipid. The properties of the Trp in helices 2 and 3 suggest that these helices adopt a different binding configuration than helices 1, 4, and 5. Helices 2 and 3 appear to be interacting with the polar headgroups of the phospholipids or constitute a different domain that does not interact with the lipid surface.     

The uncoupling protein from brown adipose tissue mitochondria. The environment of the tryptophan residues as revealed by quenching of the intrinsic fluorescence.

The uncoupling protein from brown adipose tissue is a member of the family of metabolite carriers of the mitochondrial inner membrane. It contains two tryptophan residues which have been characterized by fluorescence spectroscopy. Application of fluorescence-quenching-resolved spectroscopy (FQRS) allowed the determination of the emission maximum for each residue, both of which occur at 332 nm, thus suggesting that they are both located in a non-polar environment. Fluorescence quenching has demonstrated that both residues are accessible to acrylamide and inaccessible to Cs+, while only one of them is accessible to I-. When FQRS is combined with guanidinium hydrochloride denaturation, the unfolding of the regions containing each tryptophan can be monitored separately as they are transferred to the polar medium where the emission maximum appears at 359 nm, revealing also that the iodide-accessible residue is more sensitive to the denaturant. Secondary structure predictions, together with the data presented here, suggest that the iodide-accessible residue could correspond to Trp173 and the denaturant-resistant iodide-inaccessible one to Trp280, located in the center of the sixth transmembrane alpha-helix. Interaction of the protein with GDP (a transport inhibitor) has been studied and has revealed that it partially shields Trp173 from the interaction with I-, as well as reducing the static component of the acrylamide quenching.     

Apolipophorin III: role model apolipoprotein

It has been one-quarter century since the identification of apolipophorin III (apoLp-III) as an important component of insect hemolymph lipid transport processes. Original studies of flight-related lipid transport that led to the discovery of apoLp-III have been followed by detailed studies of its structure and function relations, species distribution as well as its physiological roles beyond lipid transport. The non-exchangeable apoLp-I and -II, which are derived from a common precursor, are structural protein components of the multifunctional lipophorin particle. ApoLp-I/II have been identified as members of a broad lipid-binding protein family based on sequence similarities with their vertebrate counterparts. By contrast, apoLp-III can be found as a lipid-free hemolymph protein that associates with lipophorin during hormone-induced lipid mobilization. Based on structural characterization, apoLp-III belongs to a large family of exchangeable apolipoproteins characterized by segments of amphipathic alpha-helix. The remarkable structural adaptability of apoLp-III can be ascribed to its globular amphipathic alpha-helix bundle conformation wherein hydrophobic lipid-binding regions are stabilized in the absence of lipid by helix-helix interactions. Upon exposure to potential lipid surface-binding sites, the globular helix bundle opens to expose its hydrophobic interior permitting substitution of helix-helix contact in the bundle for helix-lipid interactions. Novel functions of apoLp-III beyond lipid transport have been identified recently. The expanding role of apoLp-III in innate immunity promises to offer exciting research opportunities in the future.     

Role of buried polar residues in helix bundle stability and lipid binding of apolipophorin III: destabilization by threonine 31

Apolipophorin III (apoLp-III) from Locusta migratoria is a model exchangeable apolipoprotein that plays a key role in neutral lipid transport. The protein is comprised of a bundle of five amphipathic alpha-helices, with most hydrophobic residues buried in the protein interior. The low stability of apoLp-III is thought to be crucial for lipid-induced helix bundle opening, to allow protein-lipid interactions. The presence of polar residues in the hydrophobic protein interior may facilitate this role. To test this, two buried polar residues, Thr-31 and Thr-144, were changed into alanine by site-directed mutagenesis. Secondary structure analysis and GdnHCl- and temperature-induced denaturation studies indicated an increase in alpha-helical content and protein stability for T31A apoLp-III compared to wild-type apoLp-III. In contrast, T144A had a decreased alpha-helical content and protein stability, while tryptophan fluorescence indicated increased exposure of the hydrophobic interior to buffer. Two mutant proteins that had lysine residues introduced in the hydrophobic core displayed a more pronounced decrease in secondary structure and protein stability. Lipid binding studies using phospholipid vesicles showed that T31A apoLp-III was able to transform phospholipid vesicles into discoidal particles but at a 3-fold reduced rate compared to wild-type apoLp-III. In contrast, the less stable apoLp-III mutants displayed an increased ability to transform phospholipid vesicles. These results demonstrate the inverse correlation between protein stability and the ability to transform phospholipid vesicles into discoidal protein-lipid complexes and that Thr-31 is a key determinant of the relatively low protein stability, thereby promoting apoLp-III to interact with lipid surfaces.     

Fluorescence studies on the dissociation and denaturation of pigeon liver malic enzyme

Exposure of pigeon liver malic enzyme [S)-malate:NADP+ oxidoreductase (oxaloacetate-decarboxylating), EC 1.1.1.40) in medium concentrations of guanidine-HCl at 25 degrees C and pH 7.45 caused biphasic conformational changes of the enzyme molecule. Molecular weight determination confirmed that the enzyme tetramers were dissociated to monomers in phase I transition. Enzymatic activity was completely lost in this phase. Recovery of the enzyme activity was only possible in the early stages of the phase I transition. Phase II was due to enzyme unfolding, as judged by circular dichroism and the fluorescence parameters of the enzyme. The steps of the transformation of native malic enzyme into a completely denatured state were in the following sequence: tetramer----monomer----random coil. Extensive denaturation of the enzyme molecule resulted in irreversible aggregation. Dissociation and denaturation were accompanied by a red-shift of the fluorescence spectrum (328----368 nm). Fluorescence quenching studies indicated that tryptophan residues of the enzyme molecule were buried deeply in the interior of the molecule. The tryptophan residues were only partially accessible by acrylamide and almost inaccessible by KI. Dissociation and denaturation were accompanied by exposure of the tryptophan residues, as manifested by the accessibility of the enzyme molecule toward KI or acrylamide.     

Engineering out motion: a surface disulfide bond alters the mobility of tryptophan 22 in cytochrome b5 as probed by time-resolved fluorescence and 1H NMR experiments

In the accompanying paper [Storch et al. (1999) Biochemistry 38, 5054-5064] equilibrium denaturation studies and molecular dynamics (MD) simulations were used to investigate localized dynamics on the surface of cytochrome b5 (cyt b5) that result in the formation of a cleft. In those studies, an S18C:R47C disulfide mutant was engineered to inhibit cleft mobility. Temperature- and urea-induced denaturation studies revealed significant differences in Trp 22 fluorescence between the wild-type and mutant proteins. On the basis of the results, it was proposed that wild type populates a conformational ensemble that is unavailable to the disulfide mutant and is mediated by cleft mobility. As a result, the solvent accessibility of Trp 22 is decreased in S18C:R47C, suggesting that the local environment of this residue is less mobile due to the constraining effects of the disulfide on cleft dynamics. To further probe the structural effects on the local environment of Trp 22 caused by inhibition of cleft formation, we report here the results of steady-state and time-resolved fluorescence quenching, differential phase/modulation fluorescence anisotropy, and 1H NMR studies. In Trp fluorescence experiments, the Stern-Volmer quenching constant increases in wild type versus the oxidized disulfide mutant with increasing temperature. At 50 degrees C, KSV is nearly 1.5-fold greater in wild type compared to the oxidized disulfide mutant. In the reduced disulfide mutant, KSV was the same as wild type. The bimolecular collisional quenching constant, kq, for acrylamide quenching of Trp 22 increases 2.7-fold for wild type and only 1.8-fold for S18C:R47C, upon increasing the temperature from 25 to 50 degrees C. The time-resolved anisotropy decay at 25 degrees C was fit to a double-exponential decay for both the wild type and S18C:R47C. Both proteins exhibited a minor contribution from a low-amplitude fast decay, consistent with local motion of Trp 22. This component was more prevalent in the wild type, and the fractional contribution increased significantly upon raising the temperature. The fast rotational component of the S18C:R47C mutant was less sensitive to increasing temperature. A comparison of the 1H NMR monitored temperature titration of the delta-methyl protons of Ile 76 for wild type and oxidized disulfide mutant, S18C:R47C, showed a significantly smaller downfield shift for the mutant protein, suggesting that Trp 22 in the mutant protein experiences comparatively decreased cleft dynamics in core 2 at higher temperatures. Furthermore, comparison of the delta'-methyl protons of Leu 25 in the two proteins revealed a difference in the ratio of the equilibrium heme conformers of 1.2:1 for S18C:R47C versus 1.5:1 for wild type at 40 degrees C. The difference in equilibrium heme orientations between wild type and S18C:R47C suggests that the disulfide bond affects heme binding within core 1, possibly through damped cleft fluctuations. Taken together, the NMR and fluorescence studies support the proposal that an engineered disulfide bond inhibits the formation of a dynamic cleft on the surface of cyt b5.     

Tryptophan fluorescence of mitochondrial complex III reconstituted in phosphatidylcholine bilayers

The tryptophan intrinsic fluorescence of mitochondrial complex III reconstituted in phosphatidylcholine bilayers was examined at different temperatures. Absorption and emission maxima occur at 277 and 332 nm, irrespective of temperature or lipid:protein ratio even if there are indications (from fluorescence quenching) of protein conformational changes as a function of lipid:protein ratio. Low values of Trp fluorescence quantum yield in complex III (0.008-0.010) are probably due to the neighborhood of the heme groups. The temperature-dependent decrease of fluorescence intensity is nonlinear; the corresponding Arrhenius plots show "breaks" or discontinuities that could be interpreted as thermally dependent changes in protein conformation. However, no temperature-dependent changes in fluorescence quenching have been observed that may be related to protein conformational changes. In addition, Arrhenius plots of the fluorescence intensity of simple molecules, such as Trp or 1-anilino-8-naphthalene sulfonate in the presence of aqueous phospholipid dispersions, also show breaks in the same temperature range. Stern-Volmer plots of acrylamide and iodide quenching were also nonlinear, indicating large differences in quenching constants for the various tryptophanyl residues. The quenching results also suggest that, at high lipid:protein ratios, the microviscosity of the protein matrix is higher than that in lipid-poor systems. Comparison of quenching efficiencies of iodide and acrylamide suggest that no significant fraction of the fluorophores occurs in the neighborhood of charged residues.     

Structure-guided protein engineering modulates helix bundle exchangeable apolipoprotein properties

Apolipoprotein (apo) E plays a major role in lipid metabolism by mediating cellular uptake of lipoprotein particles through interaction with members of the low density lipoprotein (LDL) receptor family. The primary region of apoE responsible for receptor binding has been limited to a cluster of basic amino acids between residues 134 and 150, located in the fourth helix of the N-terminal domain globular helix bundle structure. To investigate structural and functional requirements of this "receptor binding region" we engineered an apolipoprotein chimera wherein residues 131-151 of human apoE were substituted for residues 146-166 (helix 5) of Manduca sexta apolipophorin III (apoLp-III). Recombinant hybrid apolipoprotein was expressed in Escherichia coli, isolated, and characterized. Hybrid apolipoprotein and apoE3-N-terminal, but not apoLp-III, bound to heparin-Sepharose. Far UV circular dichroism spectroscopy revealed the presence of predominantly alpha-helix secondary structure, and stability studies revealed a urea denaturation midpoint of 1.05 m, similar to wild-type apoLp-III. Hybrid apolipoprotein-induced dimyristoylphosphatidylcholine (DMPC) bilayer vesicle solubilization activity was significantly enhanced compared with either parent protein, consistent with detection of solvent-exposed hydrophobic regions on the protein in fluorescent dye binding experiments. Unlike wild-type apoLp-III.DMPC complexes, disc particles bearing the hybrid apolipoprotein competed with 125ILDL for binding to the LDL receptor on cultured human skin fibroblasts. We conclude that a hybrid apolipoprotein containing a key receptor recognition element of apoE preserves the structural integrity of the parent protein while conferring a new biological activity, illustrating the potential of helix swapping to introduce desirable biological properties into unrelated or engineered apolipoproteins.     

Conformational changes of maize and wheat NADP-malic enzyme studied by quenching of protein native fluorescence

Quenching of tryptophan fluorescence of maize and wheat NADP-malic enzyme by KI and acrylamide was studied after denaturating proteins with guanidine hydrochloride, and subjecting them to different pH values or temperatures. Protein unfolding by guanidine hydrochloride resulted in a red shift of the fluorescence spectrum, providing further support for the motion that several of the tryptophan residues evolved from an apolar to a polar environment. Protein denaturation was accompanied by an increase in the effective dynamic quenching constant values and by loss of the enzyme's activities. Thermal denaturation gave results consistent with the ones observed for chemical denaturation suggesting that a putative intermediate is involved in the denaturation process. Finally, exposure of both enzymes at various pH values allowed us to infer the number of accessible tryptophan residues in the different oligomeric conformations. The results suggest that the aggregation process seems to be different for each enzyme. Thus, as the maize enzyme associated from monomer to tetramer, one tryptophan residue would change from a polar to an apolar environment, while the association of the wheat enzyme would cause that two tryptophan residues to be excluded from quenching. Hitherto, quenching of the tryptophan fluorescence provides a good tool for studying conformational changes of proteins. The future availability of the crystal structures of plant NADP-malic enzymes will offer a good validation point for our model and the technology used.     

Fluorescence quenching of dimeric and monomeric forms of yeast hexokinase (PII): effect of substrate binding steady-state and time-resolved fluorescence studies

Fluorescence quenching studies on the PII isoenzyme of yeast hexokinase have been performed using charged as well as polar uncharged quenchers. In both 'open' (i.e. in the absence of glucose) and 'closed' (i.e. in the presence of glucose) forms of the enzyme, bimolecular quenching rate constant (kq) for acrylamide is significantly larger than that of KI, indicating that all the tryptophans are not fully exposed to the solvent. Overall accessibility of tryptophans towards KI was greater in the presence of glucose than in the absence of glucose. At high ionic strength, the value of bimolecular quenching rate constant (kq) for KI did not change suggesting that the average environment of the accessible tryptophan residue(s) is almost neutral. Quenching by KI is dynamic in nature. Accessibility of tryptophans towards acrylamide at concentration > or = 0.2 M was more in the 'open' form of the enzyme than that observed in the 'closed' form whereas at concentration < or = 0.2 M no significant difference in the extent of quenching was observed. It is reasonable to conclude that glucose induced conformational change leads some tryptophan residue(s) to be more exposed and at the same time some tryptophan residue(s) in the hydrophobic region become more buried. Dimeric and monomeric forms of the enzyme behave similarly towards the quenching by acrylamide. In the unfolded state, the accessibility of tryptophans was considerably higher for both the quenchers. Temperature dependent study and the fluorescence lifetime data indicate that the mechanism of quenching by acrylamide is primarily dynamic in nature.     

Conformational changes of (Ca2+-Mg2+)-ATPase of erythrocyte plasma membrane caused by calmodulin and phosphatidylserine as revealed by circular dichroism and fluorescence studies

Two spectroscopic techniques, circular dichroism and steady-state fluorescence, were employed in order to study conformational changes of the purified, detergent-solubilized (Ca2+-Mg2+)-ATPase of porcine erythrocyte ghost membranes. Circular dichroism (CD) spectra in the peptide region were obtained from the purified (Ca2+-Mg2+)-ATPase of porcine erythrocyte ghost membranes with the aim to investigate the secondary structure of the enzyme in the presence of calmodulin (CaM) or phosphatidylserine (PS), as well as in the E1 and E2 states. The E1 conformation was stabilized by 10 microM free Ca2+, while the E2 conformation was stabilized by 0.1 mM ethylene glycol bis(2-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA). It was found that the E1 and E2 states of the enzyme strikingly differed in their secondary structure (66% and 46% of calculated alpha-helix content, respectively). In the presence of Ca2+, PS decreased the helical content of the ATPase to 61%, while CaM to 55%. Quenching of intrinsic fluorescence of (Ca2+-Mg2+)-ATPase by acrylamide, performed in the presence of Ca2+, gave evidence for a single class of tryptophan residues with Stern-Volmer constant (KSV) of 10 M-1. Accessibility of tryptophan residues varied depending on the conformational status of the enzyme. Addition of PS and CaM decreased the KSV value to 7.6 M-1 and 8.5 M-1, respectively. In the absence of Ca2+, KSV was 7.0 M-1. KI and CsCl were less effective as quenchers. The fluorescence energy transfer between (Ca2+-Mg2+)-ATPase tryptophan residues and dansyl derivative of covalently labeled CaM occurred in the presence of EGTA, but was further promoted by Ca2+. It is concluded that the interaction of CaM and PS with (Ca2+-Mg2+)-ATPase results in different conformational states of the enzyme. CD and fluorescence spectroscopy allowed to distinguish these states from the E1 and E2 conformational forms of the ATPase.     

Conformational changes in azurin from Pseudomona aeruginosa induced through chemical and physical protocols

Azurin from Pseudomona aeruginosa is a small copper protein with a single tryptophan (Trp) buried in the structure. The Gibbs free energies associated with the folding of holo azurin, calculated monitoring Trp fluorescence and changes in absorbance on the ligand-to-metal band, are different because these techniques probe their local environments, thereby being able to probe different conformational changes. The presence of an intermediate state was observed during the chemical denaturation of the protein. Upon denaturation, a 30-fold increase is observed in the magnitude of the quenching constant of the tryptophan fluorescence by acrylamide, because this residue becomes more accessible to the quencher. Entrapping the protein in sol-gel materials lowers its stability possibly because the solvation properties of the macromolecule are changed. The thermal denaturation of azurin immobilized in a sol-gel monolith is irreversible, which tends to rule out an aggregation mechanism to account for the irreversibility of the denaturation of the protein free in solution. Unlike the Cu(II) ion, the Gd(III) ion accommodates in site B of azurin with high affinity and the folding free energy of Gd-azurin is larger than that of apo azurin.     

Apolipophorin III lysine modification: Effect on structure and lipid binding

Apolipophorin III (apoLp-III) from Locusta migratoria was used as a model to investigate apolipoprotein lipid binding interactions. ApoLp-III contains eight lysine residues, of which seven are located on one side of the protein. To investigate the role of positive charges on lipid binding, lysine residues were acetylated by acetic anhydride. The degree of acetylation was analyzed by SDS-PAGE and MALDI-TOF, indicating a maximum of eight acetyl additions. Modified apoLp-III remained α-helical, but displayed a decreased α-helical content (from 78 to 54%). Acetylation resulted in a slight increase in protein stability, as indicated by a change in the midpoint of guanidine-HCl induced denaturation from 0.55 (unmodified) to 0.65 M (acetylated apoLp-III). Lipid bound apoLp-III, either acetylated or unmodified, displayed similar increases in helical content and midpoint of guanidine-HCl-induced denaturation of ∼ 4 M. The ability to solubilize vesicles of dimyristoylphosphatidylcholine remained unchanged. However, the rate to solubilize dimyristoylphosphatidylglycerol vesicles was reduced two-fold. In addition, a decreased ability to stabilize diacylglycerol-enriched low density lipoproteins was observed. This indicated that lysine residues are not critical for the protein's ability to bind to zwitterionic phospholipids. Since binding interactions with ionic phospholipids and lipoproteins were affected by acetylation, lysine side-chains may play a modulating role in the interaction with more complex lipid surfaces encountered in vivo.     

Tryptophan fluorescence study on the interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with model membranes

The interaction of the signal peptide of the Escherichia coli outer membrane protein PhoE with different phospholipid vesicles was investigated by fluorescence techniques, using a synthetic mutant signal peptide in which valine at position -8 in the hydrophobic sequence was replaced by tryptophan. First it was established that this mutation in the signal sequence of prePhoE does not affect in vivo and in vitro translocation efficiency and that the biophysical properties of the synthetic mutant signal peptide are similar to those of the wild-type signal peptide. Next, fluorescence experiments were performed which showed an increase in quantum yield and a blue shift of the emission wavelength maximum upon interaction of the signal peptide with lipid vesicles, indicating that the tryptophan moiety enters a more hydrophobic environment. These changes in intrinsic fluorescence were found to be more pronounced in the presence of phosphatidylglycerol (PG) or cardiolipin (CL) than with phosphatidylcholine (PC). In addition, quenching experiments demonstrated a shielding of the tryptophan fluorescence from quenching by the aqueous quenchers iodide and acrylamide upon interaction of the signal peptide with lipid vesicles, a shielding in the case of acrylamide that was more pronounced in the presence of negatively charged lipids. Finally it was found that acyl chain brominated lipids incorporated into phospholipid bilayers were able to quench the tryptophan fluorescence of the signal peptide, with the quenching efficiency in CL vesicles being much higher than in PC vesicles. The results clearly demonstrate that the PhoE signal peptide interacts strongly with different lipid vesicles.(ABSTRACT TRUNCATED AT 250 WORDS)     

Transmembrane and water-soluble helix bundles display reverse patterns of surface roughness.

Amino acid exposure and surface roughness were calculated for 12 helices from three transmembrane alpha-helix bundles and 13 helices from seven water-soluble alpha-helix bundles. Transmembrane helix bundles have relatively rough surfaces exposed to the lipid bilayer hydrocarbon chains and relatively smooth surfaces along helix-helix interfaces. This pattern is the reverse of what occurs in water-soluble helix bundles, where relatively rough surfaces are at the helix-helix interfaces and relatively smooth surfaces are exposed to water. The relatively rough exposed surfaces and buried smooth surfaces of transmembrane helices are likely to contribute to the stability of transmembrane helical bundles in a phospholipid environment.     

Pyrene excimer fluorescence: a spatially sensitive probe to monitor lipid-induced helical rearrangement of apolipophorin III

Manduca sexta apolipophorin III (apoLp-III), an 18-kDa, monomeric, insect hemolymph apolipoprotein, is comprised of five amphipathic alpha-helices arranged as a globular bundle in the lipid-free state. Upon lipid binding, it is postulated that the bundle opens, exposing a continuous hydrophobic surface which becomes available for lipid interaction. To investigate lipid binding-induced helical rearrangements, we exploited the unique fluorescence characteristics of N-(1-pyrene)maleimide. Pyrene is a spatially sensitive extrinsic fluorescent probe, which forms excited-state dimers (excimers) upon close encounter with another pyrene molecule. Cysteine residues were introduced into apoLp-III (which otherwise lacks cysteine) at Asn 40 (helix 2) and/or Leu 90 (helix 3), creating two single-cysteine mutants (N40C-apoLp-III and L90C-apoLp-III) and N40C/L90C-apoLp-III, a double-cysteine mutant, which were labeled with pyrene maleimide. Pyrene-labeled N40C/L90C-apoLp-III, but not the pyrene-labeled single-cysteine mutants, exhibited strong excimer fluorescence in the lipid-free, monomeric state. Guanidine hydrochloride titration and temperature studies revealed a loss in excimer fluorescence, accompanied by a loss in the molar ellipticity of the protein. When apoLp-III interacts with phospholipid vesicles to form disklike complexes, a significant loss in excimer fluorescence was noted, indicating that the helices bearing the pyrene moieties diverge from each other. Pyrene excimer fluorescence was further employed to examine the relative orientation of lipid-bound apoLp-III molecules. Pyrene-labeled N40C- or L90C-apoLp-III displayed no excimer fluorescence in the disk complexes, while complexes prepared with an equal mixture of both single-labeled mutants did emit excimer fluorescence, indicating apoLp-III adopts a preferred nonrandom orientation around the perimeter of the bilayer disk. These studies establish pyrene excimer fluorescence as a useful spectroscopic tool to address intra- and intermolecular interactions of exchangeable apolipoproteins upon binding to lipid.