An improved transposon for the halophilic archaeon Haloarcula hispanica

An improved transposon (ThD73) for Haloarcula hispanica is described. Based on the halobacterial insertion sequence ISH28, it showed little target sequence specificity but was biased toward a lower G+C content. Twenty randomly selected ThD73 mutants were analyzed, and the DNA flanking their insertions revealed several recognizable sequences, including two (unrelated) ISH elements.     

Adaptation of the Haloarcula hispanica CRISPR-Cas system to a purified virus strictly requires a priming process

The clustered regularly interspaced short palindromic repeat (CRISPR)-Cas system mediates adaptive immunity against foreign nucleic acids in prokaryotes. However, efficient adaptation of a native CRISPR to purified viruses has only been observed for the type II-A system from a Streptococcus thermophilus industry strain, and rarely reported for laboratory strains. Here, we provide a second native system showing efficient adaptation. Infected by a newly isolated virus HHPV-2, Haloarcula hispanica type I-B CRISPR system acquired spacers discriminatively from viral sequences. Unexpectedly, in addition to Cas1, Cas2 and Cas4, this process also requires Cas3 and at least partial Cascade proteins, which are involved in interference and/or CRISPR RNA maturation. Intriguingly, a preexisting spacer partially matching a viral sequence is also required, and spacer acquisition from upstream and downstream sequences of its target sequence (i.e. priming protospacer) shows different strand bias. These evidences strongly indicate that adaptation in this system strictly requires a priming process. This requirement, if validated also true for other CRISPR systems as implied by our bioinformatic analysis, may help to explain failures to observe efficient adaptation to purified viruses in many laboratory strains, and the discrimination mechanism at the adaptation level that has confused scientists for years.     

His1, an Archaeal Virus of the Fuselloviridae Family That Infects Haloarcula hispanica

A novel archaeal virus, His1, was isolated from hypersaline waters in southeastern Australia. It was lytic, grew only on Haloarcula hispanica (titers of up to 10¹¹ PFU/ml), and displayed a lemon-shaped morphology (74 by 44 nm) previously reported only for a virus of the extreme thermophiles (SSV1). The density of His1 was approximately 1.28 g/ml, similar to that of SSV1 (1.24 g/ml). Purified particles were resistant to low salt concentrations. The genome was linear, double-stranded DNA of 14.9 kb, similar to the genome of SSV1 (15.5 kb). Morphologically, this isolate clearly belongs to the recently proposed Fuselloviridae family of archaeal viruses. It is the first member of this family from the extremely halophilic archaea, and its host, H. hispanica, can be readily manipulated genetically.     

Closely related archaeal Haloarcula hispanica icosahedral viruses HHIV-2 and SH1 have nonhomologous genes encoding host recognition functions

Studies on viral capsid architectures and coat protein folds have revealed the evolutionary lineages of viruses branching to all three domains of life. A widespread group of icosahedral tailless viruses, the PRD1-adenovirus lineage, was the first to be established. A double β-barrel fold for a single major capsid protein is characteristic of these viruses. Similar viruses carrying genes coding for two major capsid proteins with a more complex structure, such as Thermus phage P23-77 and haloarchaeal virus SH1, have been isolated. Here, we studied the host range, life cycle, biochemical composition, and genomic sequence of a new isolate, Haloarcula hispanica icosahedral virus 2 (HHIV-2), which resembles SH1 despite being isolated from a different location. Comparative analysis of these viruses revealed that their overall architectures are very similar except that the genes for the receptor recognition vertex complexes are unrelated even though these viruses infect the same hosts.     

Characterization of 1-phosphofructokinase from halophilic archaebacterium Haloarcula vallismortis

1-Phosphofructokinase (EC 2.7.1.56) (1PFK) was purified and characterized for the first time from an archaebacterial halophile Haloarcula vallismortis. The purification procedure involving (NH₄)₂SO₄ fractionation, (NH₄)₂SO₄-mediated chromatography on Sepharose 4B, CM-cellulose chromatography, hydrophobic on phenyl Sepharose and adsorption chromatography on hydroxylapatite yielded a preparation with a specific activity of 128 and 100-fold purification. From gel filtration and sucrose density gradient ultracentrifugation, the apparent molecular mass of halobacterial 1PFK was found as 76 ± 5 kDa. The halobacterial 1PFK appears to be monomeric and the possibility of an unstable phosphoenzyme intermediate during its catalysis could not be ruled out. As in the case of many halobacterial enzymes, the 1PFK was found to be halophilic and thermostable. Other catalytic features of halobacterial 1PFK were similar to its counterparts from eubacterial sources.     

Purification and characterization of dissimilatory nitrate reductase from a denitrifying halophilic archaeon, Haloarcula marismortui

Dissimilatory nitrate reductase was purified from a denitrifying halophilic archaeon, Haloarcula marismortui, to an electrophoretically homogeneous state. The purified enzyme was inferred to be a homotetramer composed of a 63 kDa polypeptide. The electron paramagnetic resonance spectrum of the purified enzyme revealed typical rhombic signals which were ascribed to Mo(V) in the Mo-molybdopterin complex. Like the bacterial membrane-bound (Nar-) enzyme, the purified enzyme supported the catalysis of chlorate. The enzyme was activated in extreme saline conditions and the values of k(cat) and K(m) toward nitrate were 145 s(-1) and 79 microM, respectively, in the presence of 2.0 M NaCl.     

Complete genome sequence of Haloarcula hispanica, a Model Haloarchaeon for studying genetics, metabolism, and virus-host interaction

Haloarcula hispanica is an extremely halophilic archaeon that has an unusually low restriction barrier and is therefore significant for studying archaeal genetics, metabolism, and virus-host interactions. Here we report the complete genome sequence (3,890,005 bp) of H. hispanica strain CGMCC 1.2049, consisting of two chromosomes and one megaplasmid.     

Molecular characterization of the genomes of actinophages SH3, SH10, SH11, and SH12 infecting Streptomyces hygroscopicus.

Summary Some physico-chemical properties of the DNAs released from the actinophages SH3, SH10, SH11, and SH12 are described. The four phage DNAs have a linear double-stranded secondary structure and are unique with respect to their high G·C contents which, from melting studies and buoyant density experiments, were found to be in the range of 68–73 mol-%. The DNA molecular weights were determined by sedimentation velocity experiments and by electron microscopic length measurements, the mean values of the two corresponding data sets being 34.0·10⁶ (SH3), 26.7·10⁶ (SH10), 26.1·10⁶ (SH11), and 28.7·10⁶ (SH12) with a mean relative error of ±5%. From different observations it was concluded that SH10 DNA, and possibly also SH11 and SH12 DNA, have cohesive ends and can undergo intramolecular or intermolecular association to form ring-like monomers or linear and ring-like multimers. Cleavage of the DNAs of SH3, SH10, SH11, and SH12 by EcoRI restriction endonuclease delivered two, one, zero, and two cleavage sites, respectively, and by BamHI restriction endonuclease eight, zero, zero, and zero cleavage sites, respectively.     

Cloning and expression of the ferredoxin gene from extremely halophilic archaeon Haloarcula japonica strain TR-1

The gene encoding a ferredoxin (Fd) from Haloarcula japonica strain TR-1 was cloned and sequenced. Sequence analysis of the cloned Ha. japonica Fd gene revealed that the structural gene consisted of an open reading frame of 387 nucleotides encoding 129 amino acids. The deduced amino acid sequence of Ha. japonica Fd showed 84 to 98% identity with corresponding sequences in other extremely halophilic archaea. The Ha. japonica Fd gene was inserted into the shuttle vector pWL102 and used to transform Ha. japonica. Ha. japonica Fd could then be produced as a fusion with HisTag (6xHis) in Ha. japonica host cells. The absorption and ESR spectra of the Fd/HisTag fusion protein revealed the presence of a [2Fe-2S] cluster which is characteristic of native Ha. japonica Fd.     

Ketohexokinase (ATP:D-fructose 1-phosphotransferase) from a halophilic archaebacterium, Haloarcula vallismortis: purification and properties.

Ketohexokinase (ATP:D-fructose 1-phosphotransferase [EC 2.7.1.3]), detected for the first time in a prokaryote, i.e., the extreme halophile Haloarcula vallismortis, was isolated and characterized from the same archaebacterium. This enzyme was characterized with respect to its molecular mass, amino acid composition, salt dependency, immunological cross-reactivity, and kinetic properties. Gel filtration and sucrose density gradient centrifugation revealed a native molecular mass of 100 kDa for halobacterial ketohexokinase, which is larger than its mammalian counterpart. The enzyme could be labeled by UV irradiation in the presence of [ gamma-32P]ATP, suggesting the involvement of a phosphoenzyme intermediate. Other catalytic features of the enzyme were similar to those of its mammalian counterparts. No antigenic cross-reactivity could be detected between the H. vallismortis ketohexokinase and the ketohexokinases from different rat tissues.     

Molecular cloning of A1-ATPase gene from extremely halophilic archaeon Haloarcula japonica strain TR-1.

The genes encoding A1-ATPase A- and B-subunits were cloned from Haloarcula japonica strain TR-1. Nucleotide sequencing analysis of the A1-ATPase gene revealed that the A- and B-subunits consisted of 586 and 473 amino acids, respectively. The deduced amino acid sequences of the A- and B-subunits of Ha. japonica showed high identities with those of Halobacterium salinarum and Haloferax volcanii. The consensus ATP-binding motif was found in the A-subunit.     

Haloarcula hispanica CRISPR authenticates PAM of a target sequence to prime discriminative adaptation

The prokaryotic immune system CRISPR/Cas (Clustered Regularly Interspaced Short Palindromic Repeats/CRISPR-associated genes) adapts to foreign invaders by acquiring their short deoxyribonucleic acid (DNA) fragments as spacers, which guide subsequent interference to foreign nucleic acids based on sequence matching. The adaptation mechanism avoiding acquiring ‘self’ DNA fragments is poorly understood. In Haloarcula hispanica, we previously showed that CRISPR adaptation requires being primed by a pre-existing spacer partially matching the invader DNA. Here, we further demonstrate that flanking a fully-matched target sequence, a functional PAM (protospacer adjacent motif) is still required to prime adaptation. Interestingly, interference utilizes only four PAM sequences, whereas adaptation-priming tolerates as many as 23 PAM sequences. This relaxed PAM selectivity explains how adaptation-priming maximizes its tolerance of PAM mutations (that escape interference) while avoiding mis-targeting the spacer DNA within CRISPR locus. We propose that the primed adaptation, which hitches and cooperates with the interference pathway, distinguishes target from non-target by CRISPR ribonucleic acid guidance and PAM recognition.     

Cloning and sequencing of ftsZ homolog from extremely halophilic archaeon Haloarcula japonica strain TR-1.

The gene encoding FtZ was cloned from triangular disc-shaped extremely halophilic archaeon Haloarcula japonica strain TR-1. Nucleotide sequencing analysis of the possible ftsZ gene revealed that the structural gene consisted of an open reading frame of 1,182 nucleotides encoding 394 amino acids. The deduced amino acid sequence of the Ha. japonica FtsZ showed high identities with those Halobacterium salinarom, Haloferax volcanii and Haloferax mediterranei FtsZs.     

Characterization of the glyceraldehyde 3-phosphate dehydrogenase from the extremely halophilic archaebacterium Haloarcula vallismortis

Glyceraldehyde 3-phosphate dehydrogenase (EC 1.2.1.12) from the extremely halophilic archaebacterium Haloarcula vallismortis has been purified in a four step procedure to electrophoretic homogeneity. The enzyme is a tetramer with a relative molecular mass of 160000. It is strictly NAD⁺-dependent and exhibits its highest activity in 2 mol/l KCl at 45°C. Amino acid analysis and isoelectric focusing indicate an excess of acidic amino acids. Two parts of the primary sequence are reported. These peptides have been compared with glyceraldehyde 3-phosphate dehydrogenases from other archaebacteria, eubacteria and eucaryotes. The peptides show a high grade of similarity to glyceraldehyde 3-phosphate dehydrogenase from eucaryotes.Abbreviations BCA bicinchoninic acid - CTAB cetyltrimethyl ammonium bromide - DTE dithioerythritol - DTT dithiothreitol - GAP glyccraldehyde 3-phosphate - GAPDH glyceraldehyde 3-phosphate dehydrogenase