Overexpression of <Emphasis Type="Italic">PSP1</Emphasis> enhances growth of transgenic Arabidopsis plants under ambient air conditions

Cellulose biosynthesis is mediated by cellulose synthases (CesAs), which constitute into rosette-like cellulose synthase complexe (CSC) on the plasma membrane. Two types of CSCs in Arabidopsis are believed to be involved in cellulose synthesis in the primary cell wall and secondary cell walls, respectively. In this work, we found that the two type CSCs participated cellulose biosynthesis in differentiating xylem cells undergoing secondary cell wall thickening in Populus. During the cell wall thickening process, expression of one type CSC genes increased while expression of the other type CSC genes decreased. Suppression of different type CSC genes both affected the wall-thickening and disrupted the multilaminar structure of the secondary cell walls. When CesA7A was suppressed, crystalline cellulose content was reduced, which, however, showed an increase when CesA3D was suppressed. The CesA suppression also affected cellulose digestibility of the wood cell walls. The results suggest that two type CSCs are involved in coordinating the cellulose biosynthesis in formation of the multilaminar structure in Populus wood secondary cell walls.     

Distribution of lignin and its coniferyl alcohol and coniferyl aldehyde groups in Picea abies and Pinus sylvestris as observed by Raman imaging

Wood cell wall consists of several structural components, such as cellulose, hemicelluloses and lignin, whose concentrations vary throughout the cell wall. It is a composite where semicrystalline cellulose fibrils, acting as reinforcement, are bound together by amorphous hemicelluloses and lignin matrix. Understanding the distribution of these components and their functions within the cell wall can provide useful information on the biosynthesis of trees. Raman imaging enables us to study chemistry of cell wall without altering the structure by staining the sample or fractionating it. Raman imaging has been used to analyze distributions of lignin and cellulose, as well as the functional groups of lignin in wood. In our study, we observed the distribution of cellulose and lignin, as well as the amount of coniferyl alcohol and aldehyde groups compared to the total amount of lignin in pine (Pinus sylvestris) and spruce (Picea abies) wood samples. No significant differences could be seen in lignin and cellulose distribution between these samples, while clear distinction was observed in the distribution of coniferyl alcohols and coniferyl aldehyde in them. These results could provide valuable insight on how two similar wood species control biosynthesis of lignin differently during the differentiation of cell wall.     

Mutations of the secondary cell wall

It has not been possible to isolate a number of crucial enzymes involved in plant cell wall synthesis. Recent progress in identifying some of these steps has been overcome by the isolation of mutants defective in various aspects of cell wall synthesis and the use of these mutants to identify the corresponding genes. Secondary cell walls offer numerous advantages for genetic analysis of plant cell walls. It is possible to recover very severe mutants since the plants remain viable. In addition, although variation in secondary cell wall composition occurs between different species and between different cell types, the composition of the walls is relatively simple compared to primary cell walls. Despite these advantages, relatively few secondary cell wall mutations have been described to date. The only secondary cell wall mutations characterised to date, in which the basis of the abnormality is known, have defects in either the control of secondary cell wall deposition or secondary cell wall cellulose or lignin biosynthesis. These mutants have, however, provided essential information on secondary cell wall biosynthesis.     

Habituation of bean (Phaseolus vulgaris) cell cultures to Quinclorac and analysis of the subsequent cell wall modifications

Background and Aims

The herbicide quinclorac has been reported to inhibit incorporation of glucose both into cellulose and other cell wall polysaccharides. However, further work has failed to detect any apparent effect of this herbicide on the synthesis of the wall. In order to elucidate whether quinclorac elicits the inhibition of cellulose biosynthesis directly, in this study bean cell calli were habituated to grow on lethal concentrations of the herbicide and the modifications in cell wall composition due to the habituation process were analysed.

Methods

Fourier transform infrared spectroscopy associated with multivariate analysis, cell wall fractionation techniques, biochemical analyses and the immunolocation of different cell wall components with specific monoclonal antibodies were used to characterize the cell walls of quinclorac-habituated cells.

Key Results

Quinclorac-habituated cells were more irregularly shaped than non-habituated cells and they accumulated an extracellular material, which was more abundant as the level of habituation rose. Habituated cells did not show any decrease in cellulose content, but cell wall fractionation revealed that changes occurred in the distribution and post-depositional modifications of homogalacturonan and rhamnogalacturonan I during the habituation process. Therefore, since the action of quinclorac on the cell wall does not seem to be due to a direct inhibition of any cell wall component, it is suggested that the effect of quinclorac on the cell wall could be due to a side-effect of the herbicide.

Conclusions

Long-term modifications of the cell wall caused by the habituation of bean cell cultures to quinclorac did not resemble those of bean cells habituated to the well-known cellulose biosynthesis inhibitors dichlobenil or isoxaben. Quinclorac does not seem to act primarily as an inhibitor of cellulose biosynthesis.Key words: Quinclorac, herbicide, Phaseolus vulgaris, cell culture habituation, primary cell wall, cellulose, FTIR spectroscopy     

Ultrastructural appearance of embedded and polished wood cell walls as revealed by Atomic Force Microscopy

Atomic Force Microscopy (AFM) was used to investigate the ultrastructural appearance of transverse wood cell wall surfaces in embedded and polished Norway spruce wood blocks. The prepared surfaces showed only little height differences, suitable for high resolution AFM phase contrast imaging. Our results revealed randomly arranged wood cell wall components in the thick secondary 2 (S2) layers of the tracheid cell walls. It is concluded that the observed distribution pattern of the cellulose fibril/matrix structure is close to the original cell wall structure. In this context, the plasticity of wood cell wall components to re-arrange and adjust to different conditions resulting in diverse structural pattern is discussed.     

Unravelling cell wall formation in the woody dicot stem

Populus is presented as a model system for the study of wood formation (xylogenesis). The formation of wood (secondary xylem) is an ordered developmental process involving cell division, cell expansion, secondary wall deposition, lignification and programmed cell death. Because wood is formed in a variable environment and subject to developmental control, xylem cells are produced that differ in size, shape, cell wall structure, texture and composition. Hormones mediate some of the variability observed and control the process of xylogenesis. High-resolution analysis of auxin distribution across cambial region tissues, combined with the analysis of transgenic plants with modified auxin distribution, suggests that auxin provides positional information for the exit of cells from the meristem and probably also for the duration of cell expansion. Poplar sequencing projects have provided access to genes involved in cell wall formation. Genes involved in the biosynthesis of the carbohydrate skeleton of the cell wall are briefly reviewed. Most progress has been made in characterizing pectin methyl esterases that modify pectins in the cambial region. Specific expression patterns have also been found for expansins, xyloglucan endotransglycosylases and cellulose synthases, pointing to their role in wood cell wall formation and modification. Finally, by studying transgenic plants modified in various steps of the monolignol biosynthetic pathway and by localizing the expression of various enzymes, new insight into the lignin biosynthesis in planta has been gained.     

Localisation of degradative enzymes in white-rot decay of lignocellulose

The use of immunogold-cytochemical labelling techniques in electron microscopy of wood infected by basidiomycete fungi has assisted in the elucidation of the localisation of enzymes which degrade lignocellulose. The use of specific immunocytochemical techniques is discussed with respect to the authenticity and accuracy of the methods, the use of adequate controls in the gold-labelling procedure, and the immunospecificity of the antibodies.Localisation of the lignin-degrading enzymes, lignin-peroxidase and laccase, has shown that these enzymes do not bind to wood cell walls unless the process of decay has already commenced. Similarly localisation of cellulases Endoglucanase II (EGII) and Cellobiohydrolase I (CBHI) has shown that these enzymes only bind to exposed ends of cellulose fibrils and to partially degraded areas of the wood cell wall. -Glucosidase is always immobilised within the extracellular polysaccharide layer surrounding fungal hyphae.This review postulates that there is regulation of the release sequence of these lignocellulolytic enzymes defining the spatial arrangement between the hyphae and the wood cell wall. This hypothesis is presented diagrammatically.     

Detecting cellulase penetration into corn stover cell walls by immuno‐electron microscopy

In general, pretreatments are designed to enhance the accessibility of cellulose to enzymes, allowing for more efficient conversion. In this study, we have detected the penetration of major cellulases present in a commercial enzyme preparation (Spezyme CP) into corn stem cell walls following mild‐, moderate‐ and high‐severity dilute sulfuric acid pretreatments. The Trichoderma reesei enzymes, Cel7A (CBH I) and Cel7B (EG I), as well as the cell wall matrix components xylan and lignin were visualized within digested corn stover cell walls by immuno transmission electron microscopy (TEM) using enzyme‐ and polymer‐specific antibodies. Low severity dilute‐acid pretreatment (20 min at 100°C) enabled <1% of the thickness of secondary cell walls to be penetrated by enzyme, moderate severity pretreatment at (20 min at 120°C) allowed the enzymes to penetrate ～20% of the cell wall, and the high severity (20 min pretreatment at 150°C) allowed 100% penetration of even the thickest cell walls. These data allow direct visualization of the dramatic effect dilute‐acid pretreatment has on altering the condensed ultrastructure of biomass cell walls. Loosening of plant cell wall structure due to pretreatment and the subsequently improved access by cellulases has been hypothesized by the biomass conversion community for over two decades, and for the first time, this study provides direct visual evidence to verify this hypothesis. Further, the high‐resolution enzyme penetration studies presented here provide insight into the mechanisms of cell wall deconstruction by cellulolytic enzymes. Biotechnol. Bioeng. 2009;103: 480–489. © 2009 Wiley Periodicals, Inc.     

Ectopic lignification in primary cellulose-deficient cell walls of maize cell suspension cultures

Maize(Zea mays L.) suspension-cultured cells with up to 70% less cellulose were obtained by stepwise habituation to dichlobenil(DCB), a cellulose biosynthesis inhibitor. Cellulose de ficiency was accompanied by marked changes in cell wall matrix polysaccharides and phenolics as revealed by Fourier transform infrared(FTIR) spectroscopy.Cell wall compositional analysis indicated that the cellulosede ficient cell walls showed an enhancement of highly branched and cross-linked arabinoxylans, as well as an increased content in ferulic acid, diferulates and p-coumaric acid, and the presence of a polymer that stained positive for phloroglucinol. In accordance with this, cellulose-de ficient cell walls showed a fivefold increase in Klason-type lignin.Thioacidolysis/GC-MS analysis of cellulose-de ficient cell walls indicated the presence of a lignin-like polymer with a Syringyl/Guaiacyl ratio of 1.45, which differed from the sensu stricto stress-related lignin that arose in response to shortterm DCB-treatments. Gene expression analysis of these cells indicated an overexpression of genes specific for the biosynthesis of monolignol units of lignin. A study of stress signaling pathways revealed an overexpression of some of the jasmonate signaling pathway genes, which might trigger ectopic lignification in response to cell wall integrity disruptions. In summary, the structural plasticity of primary cell walls is proven, since a lignification process is possible in response to cellulose impoverishment.     

Plant biotechnology for lignocellulosic biofuel production

Lignocelluloses from plant cell walls are attractive resources for sustainable biofuel production. However, conversion of lignocellulose to biofuel is more expensive than other current technologies, due to the costs of chemical pretreatment and enzyme hydrolysis for cell wall deconstruction. Recalcitrance of cell walls to deconstruction has been reduced in many plant species by modifying plant cell walls through biotechnology. These results have been achieved by reducing lignin content and altering its composition and structure. Reduction of recalcitrance has also been achieved by manipulating hemicellulose biosynthesis and by overexpression of bacterial enzymes in plants to disrupt linkages in the lignin–carbohydrate complexes. These modified plants often have improved saccharification yield and higher ethanol production. Cell wall‐degrading (CWD) enzymes from bacteria and fungi have been expressed at high levels in plants to increase the efficiency of saccharification compared with exogenous addition of cellulolytic enzymes. In planta expression of heat‐stable CWD enzymes from bacterial thermophiles has made autohydrolysis possible. Transgenic plants can be engineered to reduce recalcitrance without any yield penalty, indicating that successful cell wall modification can be achieved without impacting cell wall integrity or plant development. A more complete understanding of cell wall formation and structure should greatly improve lignocellulosic feedstocks and reduce the cost of biofuel production.     

Biosynthesis of plant cell wall polysaccharides - a complex process

Cellulose, a major component of plant cell walls, is made by dynamic complexes that move within the plasma membrane while depositing cellulose directly into the wall. On the other hand, matrix polysaccharides are made in the Golgi and delivered to the wall via secretory vesicles. Several Golgi proteins that are involved in glucomannan and xyloglucan biosynthesis have been identified, including some glycan synthases that show sequence similarity to the cellulose synthase proteins and several glycosytransferases that add sidechains to the polysaccharide backbones. Recent progress in identifying the proteins needed for polysaccharide biosynthesis should lead to an improved understanding of the molecular details of these complex processes, and eventually to an ability to manipulate them in an effort to generate plants that have improved properties for human uses.     

Expression of a mutant form of cellulose synthase AtCesA7 causes dominant negative effect on cellulose biosynthesis

Cellulose synthase catalytic subunits (CesAs) have been implicated in catalyzing the biosynthesis of cellulose, the major component of plant cell walls. Interactions between CesA subunits are thought to be required for normal cellulose synthesis, which suggests that incorporation of defective CesA subunits into cellulose synthase complex could potentially cause a dominant effect on cellulose synthesis. However, all CesA mutants so far reported have been shown to be recessive in terms of cellulose synthesis. In the course of studying the molecular mechanisms regulating secondary wall formation in fibers, we have found that a mutant allele of AtCesA7 gene in the fra5 (fragile fiber 5) mutant causes a semidominant phenotype in the reduction of fiber cell wall thickness and cellulose content. The fra5 missense mutation occurred in a conserved amino acid located in the second cytoplasmic domain of AtCesA7. Overexpression of the fra5 mutant cDNA in wild-type plants not only reduced secondary wall thickness and cellulose content but also decreased primary wall thickness and cell elongation. In contrast, overexpression of the fra6 mutant form of AtCesA8 did not cause any reduction in cell wall thickness and cellulose content. These results suggest that the fra5 mutant protein may interfere with the function of endogenous wild-type CesA proteins, thus resulting in a dominant negative effect on cellulose biosynthesis.     

Gene expression in Eucalyptus branch wood with marked variation in cellulose microfibril orientation and lacking G-layers

In response to gravitational stresses, angiosperm trees form tension wood in the upper sides of branches and leaning stems in which cellulose content is higher, microfibrils are typically aligned closely with the fibre axis and the fibres often have a thick inner gelatinous cell wall layer (G-layer). Gene expression was studied in Eucalyptus nitens branches oriented at 45 degrees using microarrays containing 4900 xylem cDNAs, and wood fibre characteristics revealed by X-ray diffraction, chemical and histochemical methods. Xylem fibres in tension wood (upper branch) had a low microfibril angle, contained few fibres with G-layers and had higher cellulose and decreased Klason lignin compared with lower branch wood. Expression of two closely related fasciclin-like arabinogalactan proteins and a beta-tubulin was inversely correlated with microfibril angle in upper and lower xylem from branches. Structural and chemical modifications throughout the secondary cell walls of fibres sufficient to resist tension forces in branches can occur in the absence of G-layer enriched fibres and some important genes involved in responses to gravitational stress in eucalypt xylem are identified.     

Towards the mechanism of cellulose synthesis

Recent research has provided insights into how plants make cellulose - the major structural material of their cell walls and the basis of the cotton and wood fibre industries. Arabidopsis thaliana mutants impaired in cellulose production are defective in genes encoding membrane-bound glycosyltransferases, an endo-1,4-beta-glucanase and several enzymes involved in the N-glycosylation and quality-control pathways of the endoplasmic reticulum. The glycosyltransferases form the rosette terminal complexes seen in plasma membranes making cellulose. Synthesis might start by making lipoglucans, which, in turn, might form the substrate for the endo-1,4-beta-glucanase, before being elongated to form the long, crystalline microfibrils that assemble in the cell wall.     

Cryo-FE-SEM & TEM immuno-techniques reveal new details for understanding white-rot decay of lignocellulose

High-resolution Cryo-Field Emission Scanning Electron Microscopy (HR-Cryo-FE-SEM) and immuno-cytochemistry were used to reveal novel details on the morphological events and spatial distribution of oxidoreductive enzymes during the degradation of birch wood by the white-rot fungi Phlebia radiata and mutant strain P radiata Cel 26. Cryo-observations of fractured fibres showed degradation across the cell wall by P. radiata (wild) to progress by delamination and removal of concentric orientated aggregates from the secondary S2 cell wall. Decay by P radiata Cel 26 progressed by removal of materials (lignin and hemicelluloses) between the aggregates (primarily cellulose) that remained even after advanced decay. With both decay patterns, extracellular slime materials were present uniting lumina hyphae with the attacked fibre wall. The extracellular slime material had two morphological forms: viz a fibrillar (often tripartite) and a 'gel-form', the former found in discrete bands progressing across the lumen onto the fibre wall. Using TEM immunocytochemistry, laccase, manganese peroxidase (MnP) and diarylpropane enzymes were localized in the periplasmic space of luminal hyphae, in association with the cell membrane, periplasmic vesicles and fungal cell wall. Extracellularly, the three enzymes were found associated with the slime and tripartite membranes and with the birch cell walls at all stages of attack through to middle lamella corner decay. Enzyme distribution was correlated with morphological changes in cell wall structure. The association of extracellular slime with these enzymes and sites of decay strongly suggests a major role for this matrix in fibre cell wall decomposition.     

Label-free in situ imaging of lignification in the cell wall of low lignin transgenic Populus trichocarpa

Chemical imaging by confocal Raman microscopy has been used for the visualization of the cellulose and lignin distribution in wood cell walls. Lignin reduction in wood can be achieved by, for example, transgenic suppression of a monolignol biosynthesis gene encoding 4-coumarate-CoA ligase (4CL). Here, we use confocal Raman microscopy to compare lignification in wild type and lignin-reduced 4CL transgenic Populus trichocarpa stem wood with spatial resolution that is sub-μm. Analyzing the lignin Raman bands in the spectral region between 1,600 and 1,700 cm⁻¹, differences in lignin signal intensity and localization are mapped in situ. Transgenic reduction of lignin is particularly pronounced in the S2 wall layer of fibers, suggesting that such transgenic approach may help overcome cell wall recalcitrance to wood saccharification. Spatial heterogeneity in the lignin composition, in particular with regard to ethylenic residues, is observed in both samples. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Biosynthesis and properties of the plant cell wall

The characterization of cell wall mutants of Arabidopsis thaliana, combined with biochemical approaches toward the purification and characterization of glycosyltransferases, has led to significant advances in understanding cell wall synthesis and the properties of cell walls. New insights have been gained into the formation of cellulose and the functions of the matrix polysaccharides rhamnogalacturonan-II and xyloglucan.     

Alteration of oriented deposition of cellulose microfibrils by mutation of a katanin-like microtubule-severing protein

It has long been hypothesized that cortical microtubules (MTs) control the orientation of cellulose microfibril deposition, but no mutants with alterations of MT orientation have been shown to affect this process. We have shown previously that in Arabidopsis, the fra2 mutation causes aberrant cortical MT orientation and reduced cell elongation, and the gene responsible for the fra2 mutation encodes a katanin-like protein. In this study, using field emission scanning electron microscopy, we found that the fra2 mutation altered the normal orientation of cellulose microfibrils in walls of expanding cells. Although cellulose microfibrils in walls of wild-type cells were oriented transversely along the elongation axis, cellulose microfibrils in walls of fra2 cells often formed bands and ran in different directions. The fra2 mutation also caused aberrant deposition of cellulose microfibrils in secondary walls of fiber cells. The aberrant orientation of cellulose microfibrils was shown to be correlated with disorganized cortical MTs in several cell types examined. In addition, the thickness of both primary and secondary cell walls was reduced significantly in the fra2 mutant. These results indicate that the katanin-like protein is essential for oriented cellulose microfibril deposition and normal cell wall biosynthesis. We further demonstrated that the Arabidopsis katanin-like protein possessed MT-severing activity in vitro; thus, it is an ortholog of animal katanin. We propose that the aberrant MT orientation caused by the mutation of katanin results in the distorted deposition of cellulose microfibrils, which in turn leads to a defect in cell elongation. These findings strongly support the hypothesis that cortical MTs regulate the oriented deposition of cellulose microfibrils that determines the direction of cell elongation.