The stable BRP signal peptide causes lethality but is unable to provoke the translocation of cloacin DF13 across the cytoplasmic membrane of Escherichia coli

The bacteriocin release protein (BRP) mediates the secretion of cloacin DF13. The BRP precursor is slowly processed to yield the mature BRP and its stable signal peptide which is also involved in cloacin DF13 secretion. The function of the stable BRP signal peptide was analysed by constructing two plasmids. First, the stable BRP signal peptide was fused to the murein lipoprotein and, second, a stop codon was introduced after the BRP signal sequence. Exchange of the unstable murein lipoprotein signal peptide for the stable BRP signal peptide resulted in an accumulation of precursors of the hybrid murein lipoprotein. This indicated that the BRP signal peptide, as part of this hybrid precursor, is responsible for the slow processing. The stable BRP signal peptide itself was not able to direct the transfer of cloacin DF13 into the periplasmic space or into the culture medium. Over-expression of the BRP signal peptide was lethal and caused 'lysis'. Subcellular fractionation experiments revealed that the BRP signal peptide is located exclusively in the cytoplasmic membrane whereas the mature BRP, targeted by either the stable BRP signal peptide or the unstable Lpp signal peptide, is located in both the cytoplasmic and outer membrane. These results are in agreement with the hypothesis that the stable signal peptide and the mature BRP together are required for the passage of cloacin DF13 across the cell envelope.     

The stable bacteriocin release protein signal peptide, expressed as a separate entity, functions in the release of cloacin DF13

Abstract The pCloDF1S encoded bacteriocin release protein (BRP) plays a role in the release of the bacteriocin cloacin DF13. The BRP signal peptide is stable after cleavage, and accumulates in the cytoplasmic membrane. A BRP which is correctly targeted by the unstable murein lipoprotein signal peptide (Lpp-BRP) is not capable of inducing the release of cloacin DF13. To investigate the role of the stable BRP signal peptide in the release of cloacin DF13, the stable BRP signal peptide and the Lpp-BRP were expressed in trans in cells also producing cloacin DF13. Expression and release experiments indicate that the stable signal peptide can complement the Lpp-BRP in the release of cloacin DF13.     

Functioning of a hybrid BRP-β-lactamase protein in the release of cloacin DF13 and lysis of Escherichia coli cells

The gene encoding a hybrid BRP-Bla protein consisting of the pCloDF13 encoded BRP signal sequence, 25 of the 28 amino acid residues of the mature bacteriocin release protein (BRP) and the mature portion of beta-lactamase (Bla) was subcloned in the expression vector pEB112. A similar construct was made using a mutant gene encoding a BRP-Bla protein in which the cysteine residue at the +1 position was changed into a glycine residue. The expression, processing, functioning and subcellular localization of the 'wild-type' and mutant hybrid protein at high-level expression conditions were studied. The 'wild-type' BRP-Bla protein was mainly found in the outer membranes and possessed all the activities of the BRP itself; the protein was able to bring about the release of cloacin DF13 and caused apparent cell-lysis after high-level synthesis. The mutant hybrid protein was predominantly located in the inner membranes, was inactive in the release of cloacin DF13, but caused apparent cell-lysis only after strong induction.     

pCloDF13-encoded bacteriocin release proteins with shortened carboxyl-terminal segments are lipid modified and processed and function in release of cloacin DF13 and apparent host cell lysis.

By oligonucleotide-directed mutagenesis, stop codon mutations were introduced at various sites in the pCloDF13-derived bacteriocin release protein (BRP) structural gene. The expression, lipid modification (incorporation of [3H]palmitate), and processing (in the presence and absence of globomycin) of the various carboxyl-terminal shortened BRPs were analyzed by a special electrophoresis system and immunoblotting with an antiserum raised against a synthetic BRP peptide, and their functioning with respect to release of cloacin DF13, lethality, and apparent host cell lysis were studied in Sup-, supF, and supP strains of Escherichia coli. All mutant BRPs were stably expressed, lipid modified, and processed by signal peptidase II, albeit with different efficiencies. The BRP signal peptide appeared to be extremely stable and accumulated in induced cells. Full induction of the mutant BRPs, including the shortest containing only 4 amino acid residues of the mature polypeptide, resulted in phospholipase A-dependent and Mg2+-suppressible apparent cell lysis. The extent of this lysis varied with the mutant BRP used. Induction of all mutant BRPs also prevented colony formation, which appeared to be phospholipase A independent. One shortened BRP, containing 20 amino acid residues of the mature polypeptide, was still able to bring about the release of cloacin DF13. The results indicated that the 8-amino-acid carboxyl-terminal segment of the BRP contains a strong antigenic determinant and that a small segment between amino acid residues 17 and 21, located in the carboxyl-terminal half of the BRP, is important for release of cloacin DF13. Either the stable signal peptide or the acylated amino-terminal BRP fragments (or both) are involved in host cell lysis and lethality.     

Expression of the pCloDF13 encoded bacteriocin release protein or its stable signal peptide causes early effects on protein biosynthesis and Mg2+ transport

The effect of the pCloDF13 encoded bacteriocin release protein (BRP) onEscherichia coli cell lethality was studied. Induction of the BRP resulted in a strong inhibition of the incorporation of radioactive labeled amino acids and affected the transport of Mg²⁺ ions. Similar effects were obtained when the BRP stable signal peptide was expressed as a separate entity. Kinetic studies revealed that these effects occurred prior to quasi-lysis and release of cloacin DF13. The results indicated that the BRP induced cell lethality is caused by early effects on protein synthesis and Mg²⁺ transport, due to the accumulation of stable BRP signal peptides in the cytoplasmic membrane.     

Optimization of bacteriocin-release-protein-induced protein release by Escherichia coli: extracellular production of the periplasmic molecular chaperone FaeE

Expression of the pCloDF13-encoded bacteriocin-release protein (BRP) results in the release of periplasmic proteins into the culture medium. The BRP-mediated release of a periplasmic protein was investigated and optimized. As a periplasmic model protein, the 50-kDa dimeric E. coli fimbrial molecular chaperone FaeE was used. Plasmids were constructed for the simultaneous expression of the BRP and FaeE, controlled by independently inducible promoters. The efficiency of FaeE release increased when the BRP was targeted by the unstable murein lipoprotein signal peptide, instead of by its own stable signal peptide. Furthermore, optimal efficacy of FaeE release was found when cells of E. coli strain C600 were used, which harboured one plasmid encoding both FaeE and BRP instead of two separate plasmids and which were cultured at 37°C in broth supplemented with MgCl₂. Maximal production levels of 21 mg FaeE/l culture were obtained.     

Effect of a mutation preventing lipid modification on localization of the pCloDF13-encoded bacteriocin release protein and on release of cloacin DF13.

The pCloDF13-encoded bacteriocin release protein (BRP; Mr 2,871) is essential for the translocation of cloacin DF13 across the cell envelope of producing Escherichia coli cells. Overproduction of this BRP provokes lysis (quasilysis) of cells. Construction and analysis of a hybrid BRP-beta-lactamase protein (BRP-Bla) demonstrated that the BRP contains a lipid modified cysteine residue at its amino terminus and is mainly located in the outer membrane. The significance of lipid modification for the localization and functioning of the BRP was investigated. Site-directed mutagenesis was used to substitute the cysteine residue for a glycine residue in the lipobox of the BRP and the BRP-Bla protein. The mutated BRP was unable to bring about the release of cloacin DF13 and could not provide the lysis (quasilysis) of host cells. However, the mutated BRP strongly inhibited the colony-forming ability of the cells, indicating that induction of the mutated protein still affected cell viability. In contrast to the wild-type BRP-Bla protein, the mutated BRP-Bla protein was mainly located in the cytoplasmic membrane, indicating that the mutation prevented the proper localization of the protein. The results indicated that lipid modification of the BRP is required for its localization and release of cloacin DF13, but not for its lethality to host cells.     

Uncoupling of synthesis and release of cloacin DF13 and its immunity protein by Escherichia coli

Summary The synthesis of the bacteriocin cloacin DF13 and its release into the culture medium were genetically uncoupled by subcloning the gene encoding the bacteriocin release protein (BRP) from pCloDF13. The gene was cloned under the control of the IPTG-inducible lpp-lac promoter-operator system on the expression vector pINIIIA1, giving pJL1. A 4 kb DNA fragment of pJL1, containing the tandem lpp-lac promoter, the BRP gene and lacI (BRP cassette), was cloned into the pCloDF13 derivative plasmid pJN67, which encodes cloacin DF13 but not the release protein. Furthermore, the pCloDF13 immunity protein gene was subcloned downstream of the temperature-inducible P _L promoter of the expression vector pPLc236, together with the BRP cassette. Growth, induction and excretion experiments with Escherichia coli cells harbouring the constructed plasmids revealed that: i) the BRP is the only pCloDF13-derived gene product responsible for the observed growth inhibition and apparent lysis of strongly induced cells. This growth inhibition and lysis can be prevented by Mg²⁺ ions added to the culture medium, and involves induction of phospholipase A activity. (ii) The expression of the BRP gene can be regulated by varying the IPTG concentration. (iii) A separately controlled and moderate induced BRP synthesis can be used to bring about the release of large amounts of cloacin DF13 under conditions that allow a strong induction of the bacteriocin and which do not result in lysis of cells. (iiii) Preliminary results indicated that the BRP can stimulate the release of immunity protein in the absence of cloacin or cloacin fragments.     

Optimization of Bacteriocin Release Protein (BRP)-Mediated Protein Release by Escherichia coli: Random Mutagenesis of the pCloDF13-Derived BRP Gene To Uncouple Lethality and Quasi-Lysis from Protein Release

Bacteriocin release proteins (BRPs) can be used for the release of heterologous proteins from the Escherichia coli periplasm into the culture medium. However, high-level expression of BRP causes apparent lysis of the host cells in liquid cultures (quasi-lysis) and inhibition of growth on broth agar plates (lethality). To optimize BRP-mediated protein release, the pCloDF13 BRP gene was subjected to random mutagenesis by using PCR techniques. Mutated BRPs with a strongly reduced capacity to cause growth inhibition on broth agar plates were selected, analyzed by nucleotide sequencing, and further characterized by performing growth and release experiments in liquid cultures. A subset of these BRP derivatives did not cause quasi-lysis and had only a small effect on growth but still functioned in the release of the periplasmic protein β-lactamase and the periplasmic K88 molecular chaperone FaeE and in the release of the bacteriocin cloacin DF13 into the culture medium. These BRP derivatives can be more efficiently used for extracellular production of proteins by E. coli than can the original BRP.     

Effects of divalent cations and of phospholipase A activity on excretion of cloacin DF13 and lysis of host cells

Induction of cloacin DF13 synthesis in Escherichia coli harbouring plasmid CloDF13 results in the release of cloacin DF13, inhibition of growth and ultimately in lysis of the host cells. Expression of the pCloDF13-encoded protein H is essential for both the release of cloacin DF13 and the lysis of the cells. The divalent cations Mg2+ and Ca2+ interfered with the mitomycin C-induced protein H-dependent lysis, but hardly affected the release of cloacin DF13. Essentially all of the bacteriocin was released from the cells before a detectable degradation of the peptidoglycan occurred, independent of the presence of mitomycin C. Experiments with phospholipase A mutants revealed that activation of detergent-resistant phospholipase A was essential for the export of cloacin DF13 across the outer membrane and the lysis of induced cells. Transport of cloacin DF13 across the cytoplasmic membrane was mainly dependent on protein H. A revised model for the excretion of cloacin DF13 is presented.     

Uptake of cloacin DF13 by susceptible cells: removal of immunity protein and fragmentation of cloacin molecules.

Monoclonal antibodies (MAb) directed against different epitopes on the equimolar complex of cloacin and immunity protein (cloacin DF13) were isolated, characterized, and used to study the uptake of cloacin DF13 by susceptible cells. Four MAbs recognized the amino-terminal part, one MAb recognized the central part, and three MAbs recognized the carboxyl-terminal part of the cloacin molecule. Three MAbs reacted with the immunity protein. Five MAbs inhibited the lethal action of cloacin DF13, but none of the MAbs inhibited the binding of cloacin DF13 to its purified outer membrane receptor protein or the in vitro inactivation of ribosomes. Binding of cloacin DF13 to susceptible cells cultured in broth resulted in a specific, time-dependent dissociation of the complex and a fragmentation of the cloacin molecules. Increasing amounts of immunity protein were detected in the culture medium from about 20 min after the addition of cloacin DF13. Cloacin was fragmented into two carboxyl-terminal fragments with relative molecular masses of 50,000 and 10,000. The larger fragment was detected 5 min after the binding of the bacteriocin complex to the cells. The smaller fragment was detected after 10 min. Both fragments were associated with the cells and could not be detected in the culture supernatant fraction. Cells grown in brain heart infusion were much less susceptible to cloacin DF13 than cells grown in broth, although they possessed a similar number of outer membrane receptor molecules. This decreased susceptibility correlated with a decreased translocation, dissociation, and fragmentation of cloacin DF13.     

Colicins are not transiently accumulated in the periplasmic space before release from colicinogenic cells

Colicins are released into the spent medium from colicinogenic cells. The pathway of release has been investigated in this study. The localization in producing cells of colicins A, E3 and of cloacin DF13 has been determined at various times after mitomycin C addition: no transient accumulation in the periplasmic space of colicinogenic E. coli K12 strains was detected by electron microscopy for any of the bacteriocins tested. Furthermore, asynchronous induction in individual cells was detected for each bacteriocin tested. These results strongly suggest that colicins, as well as cloacin DF13, do not transit through the periplasmic space before release from colicinogenic cells.     

Escherichia coli SecB, SecA, and SecY proteins are required for expression and membrane insertion of the bacteriocin release protein, a small lipoprotein.

The SecB, SecA, and SecY dependency of a small outer membrane lipoprotein in Escherichia coli, the bacteriocin release protein (BRP), was studied. The detrimental effect of BRP expression on the culture turbidity (quasi-lysis) was strongly reduced in the sec mutants. Immunoblotting and radioactive labeling experiments showed that the expression, membrane insertion, and processing of the BRP precursor are dependent on SecB, SecA, and SecY. Labeling experiments with hybrid BRP gene constructs revealed that the mature part of the BRP precursor and not its stable signal sequence is important for its SecB dependency.     

Subcloning of the cloacin DF13/aerobactin receptor protein and identification of a pColV-K30-determined polypeptide involved in ferric-aerobactin uptake.

A plasmid containing a pColV-K30 fragment that encoded only for the cloacin DF13/aerobactin receptor protein was constructed. Escherichia coli cells harboring this plasmid were sensitive to cloacin DF13 but were unable to take up ferric-aerobactin. Another pColV-K30-determined polypeptide (molecular weight, 50,000), localized in the membrane fraction, was essential for the uptake of ferric-aerobactin.     

Characterization of the pColV-K30 encoded cloacin DF13/aerobactin outer membrane receptor protein of Escherichia coli; isolation and purification of the protein and analysis of its nucleotide sequence and primary structure

Abstract The cloacin DF13/aerobactin receptor protein from Escherichia coli (pFS8) and from Klebsiella edwardsii were isolated by repeated Triton X-100 extractions and purified by affinity chromatography. Both receptor proteins ran as a single protein band on SDS-PAGE. Their apparent M_r values were 74 000 and 76 000, respectively. The binding constants of the purified receptor proteins from E. coli (pFS8) and K. edwardsii and cloacin DF13 were determined. Values of 2.0 × 10⁸ M⁻¹ and 1.0 × 10⁹ M⁻¹, respectively, were found.
The nucleotide sequence of the pColV-K30 gene, contained on pFS8 and encoding the cloacin DF13/aerobactin receptor protein, was determined and the primary structure of the protein as well as its secondary structure were deduced. The results revealed that the pColV-K30-specified receptor protein might be synthesized as a precursor, with a signal sequence of 25 amino acid residues. The mature protein has an M_r of 77 345.     

Sensitivity of Escherichia coli to cloacin DF13 involves the major outer membrane protein OmpF

Fourteen spontaneous cloacin DF13-insensitive mutants of an Escherichia coli strain expressing the aerobactin-cloacin DF13 receptor protein IutA were isolated. The mutants fell into three classes on the basis of outer membrane profiles analyzed by electrophoresis in denaturing polyacrylamide gels. The most frequent class lacked the IutA protein and was unable to bind cloacin DF13 or aerobactin. A second class of mutants had lost protein species corresponding in size to the porin proteins OmpF and OmpC. To determine which porin was required for the bactericidal activity of cloacin DF13, defined strains with mutations at the ompB (ompR envZ) locus were transformed with a recombinant plasmid carrying the iutA gene and screened for cloacin DF13 sensitivity. OmpF- strains, whether OmpC+ or OmpC-, were insensitive to cloacin DF13, indicating involvement of the OmpF protein in cloacin DF13 killing. An OmpC- OmpF+ strain, on the other hand, was more sensitive than the wild-type parent strain, probably because of compensatory overexpression of OmpF. The third class of cloacin DF13-insensitive mutant had lost an outer membrane protein of approximately 31 kDa. The nature and function of this protein are not yet known, but it is not the protease OmpT. Mutants of classes 2 and 3 bound cloacin DF13 and aerobactin as effectively as the cloacin DF13-sensitive parental strain, indicating that they remained IutA+. We propose that these mutants (more accurately described as cloacin DF13 tolerant) are defective in translocation of the active portion of cloacin DF13 across the bacterial membranes.     

In vitro binding of cloacin DF13 to its purified outer membrane receptor protein and effect of peptidoglycan on bacteriocin-receptor interaction.

The in vitro neutralization of the killing activity of cloacin DF13 by incubation with its purified receptor protein was shown to be the result of the formation of a direct and specific equimolar complex of both proteins. The binding of cloacin DF13 to its receptor protein did not result in a fragmentation of the cloacin molecules nor in the expulsion of immunity protein from the bacteriocin. The rate of the cloacin DF13-receptor interaction in vitro was found to be enhanced significantly in the presence of peptidoglycan, but lysozyme-treated peptidoglycan did not affect this interaction. Incubation of the cloacin DF13 as well as its receptor protein with peptidoglycan showed that the receptor protein but not the cloacin DF13 was able to bind to the peptidoglycan.     

Cloning,expression and release of native and mutant cloacin DF13 immunity protein

The pCloDF13 encoded immunity protein gene was subcloned in the expression vector pINIIIA1 and several deletion, insertion and point mutations were constructed in the aminoterminal and carboxyl-terminal regions of the protein. The expression, stability, BRP-dependent export and protective capacity of the native and mutant immunity proteins were studied by SDS-PAGE, immunoblotting and an in vivo activity assay. In the absence of cloacin the unbound, native immunity protein was stable produced by E. coli cells and released after BRP induction. The expression of most of the mutant immunity proteins was strongly reduced and non of the proteins were found to be released. All mutations in the carboxyl-terminal region strongly affected expression of the proteins, probably by causing protein instability and proteolytic degradation. One of these mutant immunity proteins, with an insertion mutation in its carboxylterminal region, still caused an intermediate immunity of susceptible cells against extracellularly added cloacin DF13. Mutations in the amino-terminal region of the immunity protein had less effect on its expression and did not affect the protective capacity of the protein.     

Alterations in the carboxy-termianl half of cloacin destabilize the protein and prevent its export by Escherichia coli

Several overlapping carboxy-terminal and internal deletions were constructed in the cloacin structural gene. The expression, the binding of the cloacin DF13 immunity protein and the release into the culture medium of the mutant cloacin polypeptides were studied by immunoblotting and ELISAs. Minor alterations at the carboxy-terminal end of the cloacin did not affect protein expression, stability or release to a large extent, but larger carboxy-terminal deletions strongly destabilized the protein and no release was observed. The removal of a particular region within the carboxy-terminal portion of cloacin strongly destabilized the polypeptide and made it a target for proteolytic degradation. Binding of immunity protein did not affect stability and release of the mutant polypeptides. By using immunoelectron microscopy, the polypeptides that were not exported were located in the cytoplasm of producing cells. Large aggregates of these mutant polypeptides were not observed in the cytoplasm: the polypeptides were present in a soluble form.     

tolQ is required for cloacin DF13 susceptibility in Escherichia coli expressing the aerobactin/cloacin DF13 receptor IutA

We investigated the role of the tolQ gene in the import of cloacin DF13 across the outer membrane of Escherichia coli strains expressing the IutA receptor. The IutA outer-membrane protein is the receptor for the siderophore ferric aerobactin and also binds cloacin DF13, a bacteriocin produced by strains of Enterobacter aerogenes. In this report we present evidence that tolQ is required for the internalization of cloacin DF13 upon binding to IutA but it is not involved in the transport of ferric aerobactin.