Syntheses, characterization and application of cross-linked polystyrene-ethyleneglycol acrylate resin (CLPSER) as a novel polymer support for polypeptide syntheses.

Cross-linked polystyrene-ethyleneglycol acrylate resin (CLPSER) was developed for the solid-phase synthesis of peptide by introducing a cross-linker, O,O'-bis(2-acrylamidopropyl)polyethylene glycol(1900) (Acr(2)PEG), into polystyrene. The cross-linker was prepared by treating acryloyl chloride with O,O'-bis(2-aminopropyl) polyethylene glycol(1900) [(NH(2))(2)PEG] in the presence of diisopropylethylamine. The copolymer was prepared either by bulk or inverse suspension copolymerization of Acr(2)PEG(1900) and styrene using sorbitan monolaurate as the suspension stabilizer, and a mixture of ammonium peroxodisulfate and benzoyl peroxide as the radical initiators. The resin was characterized using gel-phase (13)C NMR, infrared (KBr) spectroscopic techniques and the morphological features of the resin were investigated using scanning electron microscopy photographs. CLPSER showed excellent swelling in a broad range of solvents and was found to be chemically inert to various reagents and solvents used in solid-phase peptide synthesis. To demonstrate the usefulness of the new resin in polypeptide synthesis, the support was derivatized with an 'internal reference' amino acid (norleucine) and a handle 4-(4-hydroxymethyl-3-methoxy)butyric acid. The new resin was compared with commercial supports such as Merrifield and Sheppard resins by synthesizing an acyl carrier protein (65-74) fragment under the same experimental conditions. HPLC profiles revealed the high efficiency of the newly developed support. Resin capability in peptide synthesis was further demonstrated by the solid phase synthesis of a 25-residue peptide from the E2/NS1 region hepatitis C viral polyprotein.     

Solid phase synthesis of an amphiphilic peptide modified for immobilisation at the C-terminus

The solid phase peptide synthesis (SPPS) of the amphiphilic peptide Ac-(Leu-Ala-Arg-Leu)(3)-linker, which is modified at the C-terminus with 1,8-diamino-3,6-dioxaoctane as linker moiety, has been investigated. Two different approaches that allow for the synthesis of C-terminally modified, side-chain protected peptides were examined. The solid phase peptide synthesis using aliphatic safety-catch resin followed by activation and aminolysis with the mono-Boc protected linker was compared with the synthesis on 1,8-diamino-3,6-dioxaoctane loaded 2-chlorotrityl resin.     

An efficient gel-phase synthesis of peptides on a high capacity flexible crosslinked polystyrene support: comparison with Merrifield resin.

A highly solvating copolymer was prepared in high yield by introducing a flexible crosslinker, 1,4-butanedioldimethacrylate, into the polystyrene matrix by a free radical aqueous suspension polymerization. A 2 mol% crosslinked resin showed rigidity and mechanical characteristics comparable to those of divinylbenzene-crosslinked polystyrene (Merrifield resin, DVB-PS) support. Swelling and solvation characteristics of the new resin, BDDMA-PS, were much higher than DVB-PS support in all solvents used for solid phase peptide synthesis. The diacrylate crosslinks in the resin network were found to be highly stable even after 48 h treatment with neat TFA, 6 N HCl and 6 N KOH at 110 degrees C. To demonstrate the usefulness of the new resin in high capacity peptide synthesis, a typical difficult peptide, acyl carrier protein (ACP) fragment (65-74), was synthesized on commercially available 1 mol% crosslinked DVB-PS and 2 mol% crosslinked BDDMA-PS resins under identical conditions. A protocol using NMP/DMSO mediated coupling was employed for chain assembly. The yield and purity of the product from BDDMA-PS resin was higher than when the DVB-PS resin was used. The mechanistic reason behind the synthetic efficiency of the new resin was found to be its ability to induce random coil conformation to the growing peptide chains.     

Neurotrophic peptide aldehydes: solid phase synthesis of fellutamide B and a simplified analog

A combination of solid phase and solution phase synthetic methods have been used to complete the total synthesis of the neurotrophic lipopeptide aldehyde fellutamide B (2). The beta-hydroxy aliphatic tail was prepared by regioselective reductive opening of a cyclic sulfate, and later coupled to a solid phase resin. The synthetic compound was then examined in cytotoxicity and nerve growth factor (NGF) induction assays. A simplified analog of fellutamide B also showed activity.     

Solid phase synthesis of a GHRP analog containing C-terminal thioamide group

[Lyst6]GHRP, the C-terminally thionated analog of the highly potent growth hormone releasing hexapeptide His-D-Trp-Ala-Trp-D-Phe-Lys-NH2 was prepared by using solid support. The success of the synthesis showed that Lawesson's reagent can be used for selective thionation of an amide group not only in solution but also on the surface of a resin. The C-terminal thioamide group proved to be stable under the conditions of the solid phase synthesis.     

Solid phase synthesis of a glycopeptide analogue using the acid sensitive 4-methoxybenzhydryl bromide resin

A convenient solid phase synthesis of a Thrombin Receptor Glycopeptide Mimetic analogue namely, 1-O-Methyl-2-N-{1'-(argininocarbonyl)-4'-[(4'-fluoro)-benzylamido]-cyclohexane}-glucosamine using Fmoc/tBu methodology and the 4-Methoxybenzhydryl bromide resin is described. The synthesized analogue was purified by Reverse Phase High Performance Liquid Chromatography (RP-HPLC) and was identified by Electron Spray Ionization-Mass Spectrometry (ESI-MS) and Nuclear Magnetic Resonance (NMR). The synthetic protocol introduced for the first time successfully the acid sensitive 4-Methoxybenzhydryl bromide resin as a scaffold for the synthesis of glycopeptides resulting in high yield reactions. This synthetic procedure could be a general one for the convenient synthesis of such glyco compounds as the method was used for the first time to glycosylate a non peptide mimetic of an important protein sequence, in particular of the thrombin receptor active site S42FLLR46.     

Comparative evaluation of four trityl-type amidomethyl polystyrene resins in Fmoc solid phase peptide synthesis.

Four trityl-type (i.e. non-substituted trityl-, o-Cl-trityl-, o-F-trityl- and p-CN-trityl-) amidomethyl polystyrene resins were evaluated comparatively, in terms of the stability of the trityl-ester bond in slightly acidic dichloromethane solutions, and the p-CN-trityl-amidomethyl polystyrene resin was found to be the most stable of them. The above resins were applied, in parallel with Wang benzyl-type resin, well known for its stability in mild acidic conditions, to the Fmoc solid phase synthesis of the 43-amino acid residue long bioactive peptide thymosin beta-4. Independent of their differences in acid sensitivity, the resins seemed to function equally well under the conditions used, since pure thymosin beta-4 was obtained with a final yield of approximately 30% from each resin. The trityl-type amidomethyl polystyrene resins were also applied, in parallel with the Wang resin, to the Fmoc solid phase synthesis of a bioactive peptide containing proline at its C-terminus, i.e. the N-terminal tetrapeptide of thymosin beta-4, AcSDKP. In this case, the best yield (87%) was obtained with the o-Cl-trityl-amidomethyl polystyrene resin, which may be the resin of choice, of those studied, for the Fmoc solid phase peptide synthesis.     

Assessing the correlation of microscopy‐based and volumetry‐based measurements for resin swelling in a range of potential greener solvents for SPPS

The degree of resin swelling in a particular solvent system is one of the critical parameters for solid‐phase peptide synthesis (SPPS) and for solid‐phase synthesis in general. Methods used for measuring the degree of resin swelling include microscopy‐based and volumetry‐based methods. This study describes and compares the use of both methods for a number of commercially available resins commonly used in SPPS, with a range of solvents, which have been identified in the literature as ‘greener’ than DCM, DMF and NMP. The results were analysed by statistical methods, and a significant correlation between the two distinct methods has been demonstrated for the first time. The results will likely be used, in conjunction with other literature methods, to help in choosing both the resin and solvent system for greener SPPS, as well as for continuous flow SPPS, which is of growing importance.     

Preparation of protected peptide amides using the Fmoc chemical protocol. Comparison of resins for solid phase synthesis.

Different resins were examined for their potential use in the solid phase synthesis of protected peptide amides using the 9-fluorenylmethoxycarbonyl (Fmoc) chemical protocol. The model protected peptide amide BocTyr-Gly-Gly-Phe-Leu-Arg(Pmc)NH2 (1) was synthesized on both the acid-labile 4-(2',4'-dimethoxyphenyl-Fmoc-aminomethyl)phenoxy resin (Rink amide resin) (2) and on resins containing the base-labile linker 4-hydroxymethylbenzoic acid. Of the resins examined only the methylbenzhydrylamine resin containing the 4-hydroxymethylbenzoic acid linkage, which was cleaved by ammonolysis in isopropanol, gave the model peptide 1 in good overall yield (53% including functionalization). Thus the synthesis of protected peptide amides by solid phase synthesis using Fmoc-protected amino acids with t-butyl-type side chain protecting groups is feasible. The choice of peptide-resin linkage and its cleavage conditions, however, are critical to the success of such syntheses. The potential application of this synthetic strategy to the preparation of novel peptide amides is discussed.     

Solid support post-conjugation of amino acids and a phenanthroline derivative to a central position in peptide nucleic acids

A solid phase synthesis strategy for post-conjugation of amino acids and a phenanthroline derivative to peptide nucleic acids is described. The peptide nucleic acids, synthesized by 9-fluorenylmethyloxycarbonyl chemistry on TentaGel S Rink Amide resin, have an internally placed unit carrying an amino linker with 4-methyltrityl protection. Methyltrityl removal by mild acidic conditions and conjugation of amino acids or a phenanthroline derivative, via an amide or urea linker, was performed on-resin after completion of the chain assembly. This solid phase methodology resulted in excellent purities of the crude conjugates.     

A convenient approach to synthesizing peptide C-terminal N-alkyl amides

Peptide C-terminal N-alkyl amides have gained more attention over the past decade due to their biological properties, including improved pharmacokinetic and pharmacodynamic profiles. However, the synthesis of this type of peptide on solid phase by current available methods can be challenging. Here we report a convenient method to synthesize peptide C-terminal N-alkyl amides using the well-known Fukuyama N-alkylation reaction on a standard resin commonly used for the synthesis of peptide C-terminal primary amides, the peptide amide linker-polyethylene glycol-polystyrene (PAL-PEG-PS) resin. The alkylation and oNBS deprotection were conducted under basic conditions and were therefore compatible with this acid labile resin. The alkylation reaction was very efficient on this resin with a number of different alkyl iodides or bromides, and the synthesis of model enkephalin N-alkyl amide analogs using this method gave consistently high yields and purities, demonstrating the applicability of this methodology. The synthesis of N-alkyl amides was more difficult on a Rink amide resin, especially the coupling of the first amino acid to the N-alkyl amine, resulting in lower yields for loading the first amino acid onto the resin. This method can be widely applied in the synthesis of peptide N-alkyl amides.     

Fmoc-Asn(Trt)-OH与Wang树脂的合成研究

研究了Fmoc-Asn(Trt)-OH与Wang树脂的酯化反应工艺。探讨了反应策略、溶剂体系、投料比、反应时间以及反应温度等条件对手工合成Fmoc-Asn(Trt)-Wang树脂反应的影响。并用微波辅助方法与常规方法进行了对比。实验结果表明了采用HBTU/HOBt/DIEA方法的连接效率最高。对反应的优化结果为:NMP/DCM体积比为1:7,体系、摩尔比为3:1,每次反应时间4 h,温度40℃。微波对本酯化反应影响不大。     

Synthesis of highly substituted 5-(trifluoromethyl)ketoimidazoles using a mixed-solid/solution phase motif

Using a combination of solid phase synthesis for the preparation of N-substituted-N-acylglycines 7 followed by solution-phase ring transformation of trifluoromethylacyl munchnone intermediate 8, a library of 200 trisubstituted-5-trifluoromethylketo (TFMK) imidazoles 9 was prepared. In a sublibrary, bromoacetate resin 4 was treated with 5 amines in parallel to give N-substituted glycines 5 followed by acylation with 12 acid chlorides to provide, upon cleavage from the resin, 60 individual N-substituted-N-acylglycines 7. The glycines 7 were converted to munchnones 8 by treatment with trifluoroacetic anhydride followed by reaction with benzamidine to give trisubstituted-5-TFMK-imidazoles 9. The structural content of the library was analyzed using PlateView of the LCMS results, and individual members were isolated by automated preparative LCMS.     

Multiple peptide synthesis using a single support (MPS3)

An automated multiple peptide synthesis method to synthesize, cleave, and purify several peptides simultaneously in a single batch has been developed. The technique is based on the synthesis of multiple peptides on a single solid phase support and is easily adapted to manual or to automated methods. The approach relies on coupling of amino acid mixtures to the resin and it has been found that DCC/HOBt gives the best coupling performance. Fast Atom Bombardment Mass Spectrometry (FAB-MS) was used to rapidly and efficiently identify the peptides in each synthetic mixture which significantly assisted the purification process by HPLC. The method has been successfully applied to the synthesis of magainin 2 and angiotensinogen peptides.     

Two-step hard acid deprotection/cleavage procedure for solid phase peptide synthesis

A new two-step deprotection/cleavage procedure for t-butoxycarbonyl (Boc) based solid phase peptide synthesis is reported. First the protective groups are removed from 4-(oxymethyl)-phenylacetamidomethyl (PAM) resin attached peptide with the weak hard acid, trimethylsilyl bromide-thioanisole/trifluoroacetic acid (TFA). In the second step, the peptide is cleaved from the resin with a stronger hard acid such as trimethylsilyl trifluoromethanesulfonate in TFA or with HF. The method is also shown to deformylate Nin-formyltryptophan moiety efficiently. The usefulness of this procedure for practical solid phase peptide synthesis is demonstrated by comparison with other deprotection methods in the synthesis of urotensin II and human endothelin.     

Modeling of tanshinone synthesis and phase distribution under the combined effect of elicitation and in situ adsorption in Salvia miltiorrhiza hairy root cultures

Modeling of tanshinone synthesis and phase distribution under the combined effect of elicitation and adsorption was studied. The simulated results showed that enhancement of tanshinone production was mainly due to the effect of the elicitor and that resin addition resulted in adsorbance of the tanshinones from the root and alteration of tanshinone distribution. Furthermore, parameter sensitivities analysis showed that the rate of transport of tanshinones from the root to the medium was the important factor that influenced tanshinone accumulation in the resin. In conclusion, the modeling of tanshinone synthesis and phase distribution identified the process mechanism under the combined effect of elicitation and adsorption and this modeling can be used in similar plant tissue culture systems.     

Application of 2-chlorotrityl resin in solid phase synthesis of (Leu15)-gastrin I and unsulfated cholecystokinin octapeptide. Selective O-deprotection of tyrosine.

The carboxyl terminal dipeptide amide, Fmoc-Asp-Phe-NH2, of gastrin and cholecystokinin (CCK) has been attached in high yield through its free side chain carboxyl group to the acid labile 2-chlorotrityl resin. The obtained peptide resin ester has been applied in the solid phase synthesis of partially protected (Leu15)-gastrin I utilising Fmoc-amino acids. Quantitative cleavage of this peptide from resin, with the t-butyl type side chain protection intact is achieved using mixtures of acetic acid/trifluoroethanol/dichloromethane. Under the same conditions complete detritylation of the tyrosine phenoxy function occurs simultaneously. Thus, the solid-phase synthesis of peptides selectively deprotected at the side chain of tyrosine is rendered possible by the use of 2-chlorotrityl resin and Fmoc-Tyr(Trt)-OH. The efficiency of this approach has been proved by the subsequent high-yield synthesis of three model peptides and the CCK-octapeptide.     

Growth, induction, and substrate specificity of dehydroabietic acid-degrading bacteria isolated from a kraft mill effluent enrichment.

We investigated resin acid degradation in five bacteria isolated from a bleach kraft mill effluent enrichment. All of the bacteria grew on dehydroabietic acid (DHA), a resin acid routinely detected in pulping effluents, or glycerol as the sole carbon source. None of the strains grew on acetate or methanol. Glycerol-grown, high-density, resting-cell suspensions were found to undergo a lag for 2 to 4 h before DHA degradation commenced, suggesting that this activity was inducible. This was further investigated by spiking similar cultures with tetracycline, a protein synthesis inhibitor, at various times during the DHA disappearance curve. Cultures to which the antibiotic was added prior to the lag did not degrade DHA. Those that were spiked with the antibiotic after the lag phase (4 h) degraded DHA at the same rate as did controls with no added tetracycline. Therefore, de novo protein synthesis was required for DHA biodegradation, confirming that this activity is inducible. The five strains were also evaluated for their ability to degrade other resin acids. All strains behaved in a similar fashion. Unchlorinated abietane-type resin acids (abietic acid, DHA, and 7-oxo-DHA) were completely degraded within 7 days, whereas pimarane resin acids (sandaracopimaric acid, isopimaric acid, and pimaric acid) were poorly degraded (25% or less). Chlorination of DHA affected biodegradation, with both 12,14-dichloro-DHA and 14-chloro-DHA showing resistance to degradation. However, 50 to 60% of the 12-chloro-DHA was consumed within the same period.     

General method for rapid synthesis of multicomponent peptide mixtures

A method is suggested for the synthesis of multicomponent peptide mixtures. The method is a solid phase synthesis modified in order to give a closely equimolar mixture of peptides with predetermined sequences. The main point of modification is that before every coupling cycle the resin is divided into equal parts and each portion is coupled with a different amino acid. Then the portion are mixed and before the next coupling cycle the resin is again distributed into equal portions. The method is illustrated by the synthesis of a mixture of 27 tetrapeptides and that of 180 pentapeptides.     

Solid phase synthesis and biological activity of mast cell degranulating (MCD) peptide: a component of bee venom

Mast cell degranulating (MCD) peptide, a 22 amino acid residue basic peptide from bee venom, was synthesized by stepwise solid phase synthesis on a benzhydrylamine resin support. N alpha-t-butyloxycarbonyl and benzyl type side chain protection was used. The two disulfide bridges were formed selectively by using S-acetamidomethyl protection for the cysteine residues in position 5 and 19 and S-methylbenzyl protection for the cysteine residues in positions 3 and 15. Crude synthetic MCD peptide was obtained following deprotection and cleavage from the resin by the low/high HF method. The peptide was isolated in pure form by ion exchange chromatography and gel filtration. The final product has physical, chemical, and biological properties identical with those reported for the natural product. The synthetic strategy utilized for MCD peptide will facilitate the availability of structurally similar analogs for evaluating antihistaminic and anti-inflammatory activities.