Transposition of Tn1545-delta 3 in the pathogenic Neisseriae: a genetic tool for mutagenesis.

The ability to study the virulence of pathogenic Neisseria spp. has been greatly limited by the absence of genetic tools which allow the construction of defined mutants. We have engineered a transposon system which allows random mutagenesis of the Neisseria genome at relatively high frequency. Tn1545-delta 3 is a 3.4-kb derivative of the gram-positive transposon Tn1545 encoding resistance to kanamycin. Tn1545-delta 3 was subcloned into an erythromycin-resistant derivative of the mobilizable shuttle vector pLES2 to yield the plasmid pMGC20. This latter plasmid was introduced by conjugation from Escherichia coli S17-1 into Neisseria meningitidis 8013N and Neisseria gonorrhoeae 15063G. Kanamycin-resistant 8013N and 15063G transconjugants appeared at frequencies of 10(-5) and 10(-6), respectively. Restriction enzyme analysis and Southern blot hybridization of these transconjugants showed that, in Neisseria spp., the transposon excised spontaneously from pMGC20 and integrated into chromosomal DNA. Our studies revealed that (i) transposition of Tn1545-delta 3 was in numerous, apparently distinct sites, (ii) in most cases, for each transconjugant a single copy of Tn1545-delta 3 was integrated into the chromosome, and (iii) several passages on selective media did not induce secondary transposition. The kanamycin resistance marker expressed by the transconjugants was subsequently transformed into a parental background without change in the chromosomal location of the transposon. To assess the role of the general recombination system in the transposition of Tn1545-delta 3, the recA gene of N. meningitidis has been cloned and a rec derivative of 8013N has been engineered. Similar results were obtained when this latter strain was used as recipient, suggesting that recA function were not required for Tn1545-delta 3 transposition in N. meningitidis. Transposition with Tn1545-delta 3 may be an important technique for mutagenesis of the pathogenic neisseriae.     

Transposon mutagenesis in Actinobacillus pleuropneumoniae with a Tn10 derivative.

A transposon mutagenesis procedure functional in the gram-negative swine pathogen Actinobacillus pleuropneumoniae was developed for the first time. The technique involved the use of a suicide conjugative plasmid, pLOF/Km, carrying a mini-Tn10 with an isopropyl-beta-D-thiogalactopyranoside (IPTG)-inducible transposase located outside the mobile element (M. Herrero, V. de Lorenzo, and K. N. Timmis, J. Bacteriol. 172:6557-6567, 1990). The plasmid was mobilized from Escherichia coli to A. pleuropneumoniae through the RP4-mediated broad-host-range conjugal transfer functions provided by the chromosome of the donor strain. When IPTG was present in the mating medium, A. pleuropneumoniae CM5 transposon mutants were obtained at a frequency of 10(-5), while no mutants were detected in the absence of IPTG. Since the frequency of conjugal transfer of the RP4 plasmid from E. coli to A. pleuropneumoniae CM5 was found to be as low as 10(-4), the above result indicated that the expression level of the transposase was a critical factor for obtaining a workable efficiency of transposon mutagenesis. The transposon insertions occurred at random, as determined by Southern blotting of chromosomal DNA of randomly selected mutants and by the ability to generate mutants defective for the selected phenotypes. Almost all the mutants analyzed resulted from a single insertion of the Tn10 element. About 1.2% of the mutants resulted from the cointegration of pLOF/Km into the A. pleuropneumoniae chromosome. The applicability of this transposon mutagenesis system was verified on other A. pleuropneumoniae strains of different serotypes. The usefulness of this transposon mutagenesis system in genetic studies of A. pleuropneumoniae is discussed.     

TAIL-PCR方法快速分离Xcc致病相关基因序列

以mini-Tn5 gfp-km转座子中nptⅡ片段作为探针,对已获得的五株野油菜黄单胞菌野油菜黑腐病致病型（Xcc)非致病突变体进行了Southern blot分析,结果表明,这五株突变体确由mini-Tn5 gfp-km转座子插入致病相关基因所致,且为单拷贝不同位点的插入。提取这五株突变体总DNA作为模板,采用改进的热不对称交错PCR（TAIL－PCR）方法从其中克隆到了各自转座子插入区侧翼序列,对这些侧翼序列进行了序列测定并将分析结果与GenBank database及Xcc全基因组序列做了比较,结果表明,五个侧翼序列所在的基因确与Xcc致病性有关。这种改进后的TAIL－PCR方法为突变体特别是转座子插入突变体中目的基因的克隆提供了一种简要高效的新方法。     

Stability, frequency and multiplicity of transposon insertions in the pyoverdine region in the chromosomes of different fluorescent pseudomonads.

Tn5 mutagenesis of different fluorescent pseudomonads was achieved by conjugational transfer of the suicide vector pSUP 10141. Pyoverdine negative (Pvd-) mutants were detected by the absence of fluorescence on King's B medium and by their inability to grow in the presence of the iron chelator EDDHA [ethylenediamine di(o-hydroxyphenylacetic acid)]. In P. fluorescens ATCC 17400 and three rhizosphere isolates (one P. putida and two P. fluorescens), the percentage of Pvd- mutants ranged between 0 and 0.54%. In a P. chlororaphis rhizosphere isolate, this percentage was higher (4%). In these mutants both of the Tn5 antibiotic resistances (Km and Tc) were stable and the transposon could be detected by hybridization. In Pvd- mutants of P. fluorescens ATCC 17400, the transposon was found to be inserted twice in the chromosome while single insertions were detected in the DNA of other, randomly tested mutants. In P. aeruginosa PAO1, where 13.1% of the mutants were Pvd-, both antibiotic resistances were rapidly lost and accordingly no transposon insertion could be detected by hybridization. However, the Pvd- phenotype was generally stable in these mutants. The plasmid pNK862 containing a mini-Tn10 transposon was introduced by electroporation into P. aeruginosa PAO1 and Kmr mutants were recovered, 89% of which were Pvd- and confirmed to be P. aeruginosa by PCR amplification of the P. aeruginosa lipoprotein gene. The mini-Tn10 insertions were also found to be unstable in PAO1.     

Generation of Mini-Tn10 transposon insertion mutant library of Bacillus thuringiensis for the investigation of genes required for its bacteriocin production

Bacillus thuringiensis strain BUPM4 is known for its ability to produce a bacteriocin, called Bacthuricin F4 (BF4), which inhibits the growth of several Gram-positive bacteria and particularly Bacillaceae . This study aimed to use the insertional transposon mutagenesis approach for disrupting and thus identifying genes associated with BF4 synthesis. Here, the mini-Tn 10 transposon was used to generate a library of B. thuringiensis mutants. Twenty thousand clones were screened for the search of mutants with affected bacteriocin synthesis. By molecular hybridization, it was demonstrated that the mini-Tn 10 transposition occurred in different sites. Clone MB1, containing a mini-Tn 10 single-copy insertion, lost the BF4 synthesis, but maintained its immunity to BF4. The flanking sequences surrounding the mini-Tn 10 insertion were cloned and sequenced. Homology searches of the surrounding ORFs revealed a strong similarity to a phage tail component, which allowed us to postulate that BUPM4 bacteriocin could be a phage tail-like one.     

Random mutagenesis of Legionella pneumophila reveals genes associated with lipopolysaccharide synthesis and recognition by typing monoclonal antibodies

AIMS: To use random mutagenesis for the characterization of Legionella pneumophila lipopolysaccharide (LPS) components and serotypes. METHODS AND RESULTS: Five strains belonging to different serogroups and/or monoclonal subgroups were mutagenized using a mini-Tn10 transposon. Exactly 11 819 mutants were checked for alterations in LPS using at least 11 monoclonal antibodies (mAbs) that define L. pneumophila serotypes. Among the mutants, five different mini-Tn10 insertions were identified. Four mutants originating from serogroup-1 did not lose their serogroup-specific epitope, but did sustain subtler changes that resulted in switches to different mAb subgroups. In contrast, a mutant from serogroup-6 lost its serogroup-specific epitope, while retaining a serogroup-cross-reacting epitope. CONCLUSIONS: Random mutagenesis is a valuable tool for LPS epitope mapping. While some characteristics of L. pneumophila LPS can be altered, others appear resistant to mutagenesis. This underscores both the flexibility and rigidity of LPS architecture in L. pneumophila. SIGNIFICANCE AND IMPACT OF THE STUDY: Losses of L. pneumophila LPS epitopes can result in new serotypes, changes that might escape detection by current DNA-based typing schemes. But, as the frequency of these changes is rare, based upon our observations, serotyping should remain an important tool for identifying L. pneumophila in water systems that are implicated in human infection.     

Transposon Tn5 mutagenesis in Rhodopseudomonas palustris

Abstract The potential of the antibiotic resistance transposon Tn5 for random insertion mutagenesis in Rhodopseudomonas palustris was assessed. The Tn5 containing suicide vector plasmid pSUP2021, was transferred from Escherichia coli to Rhodopseudomonas palustris and kanamycin-resistant transconjugants arose at a frequency of 2.7×10⁻⁷ per recipient. In the majority of transconjugants tested, Tn5 was found to have successfully transposed to yield a single chromosomal insertion, with the concomitant loss of the vector plasmid through segregation. Two Tn5 mutants, one defective in carotenoid synthesis, and one exhibiting a reduced anaerobic growth rate on aromatic acids, were partially characterised. This is the first study to show that Tn5 mutagenesis can be applied successfully to isolate mutants of Rhodopseudomonas palustris .     

Genetic analysis of a gene cluster for cyclohexanol oxidation in Acinetobacter sp. Strain SE19 by in vitro transposition

Biological oxidation of cyclic alcohols normally results in formation of the corresponding dicarboxylic acids, which are further metabolized and enter the central carbon metabolism in the cell. We isolated an Acinetobacter sp. from an industrial wastewater bioreactor that utilized cyclohexanol as a sole carbon source. A cosmid library was constructed from Acinetobacter sp. strain SE19, and oxidation of cyclohexanol to adipic acid was demonstrated in recombinant Escherichia coli carrying a SE19 DNA segment. A region that was essential for cyclohexanol oxidation was localized to a 14-kb fragment on the cosmid DNA. Several putative open reading frames (ORFs) that were expected to encode enzymes catalyzing the conversion of cyclohexanol to adipic acid were identified. Whereas one ORF showed high homology to cyclohexanone monooxygenase from Acinetobacter sp. strain NCIB 9871, most of the ORFs showed only moderate homology to proteins in GenBank. In order to assign functions of the various ORFs, in vitro transposon mutagenesis was performed using the cosmid DNA as a target. A set of transposon mutants with a single insertion in each of the ORFs was screened for cyclohexanol oxidation in E. coli. Several of the transposon mutants accumulated a variety of cyclohexanol oxidation intermediates. The in vitro transposon mutagenesis technique was shown to be a powerful tool for rapidly assigning gene functions to all ORFs in the pathway.     

Stability of mutations in a Sphingomonas strain.

Sphingomonas sp. strain RW1 is able to mineralise dibenzofuran and dibenzo-p-dioxin. Three mutants were constructed that could not use dibenzofuran or dibenzo-p-dioxin as a carbon source but were able to grow with the succeeding metabolites of the pathway. Two different mutagenic agents were applied, a chemical treatment with 1-methyl-3-nitro-1-nitrosoguanidine, resulting in mutants RW1-N6 and RW1-N7, and a biological insertion mutagenesis with the mini-Tn5 transposon pBSL118, resulting in mutant RW1-M3. Southern blot analysis and PCR experiments confirmed a single insertion of the mini-Tn5 into one of the genes coding for the oxygenase component of the dibenzofuran 4,4a-dioxygenase system. The genetic stability of these mutants was examined after growth with complex medium under nonselective conditions. All three mutants failed to revert to wild-type metabolic functions.     

Construction of random transposition mutagenesis system in Rhodococcuserythropolis using IS1415

Recent studies on the metabolic activities of genus Rhodococcus have shown rhodococci to be of important use in industrial, pharmaceutical and environmental biotechnology. The increasing economic significance of Rhodococcus encourages renewed efforts to characterize their genetic systems, as Rhodococcus genetics are still poorly understood. The goal of this study is to adapt a transposon system for use in creating random mutagenesis in Rhodococcus erythropolis. A plasmid carrying IS1415, a member of IS21 family identified from Rerythropolis, has been constructed and designated as pTNR. pTNR is a non-replicating transposon tool introduced into target cells by electroporation. During its transposition, the transposable-marker gene is separated from the open reading frames (istAB) of IS1415, which should avoid secondary transposition. Transposition of pTNR into wild-type R. erythropolis created mutagenesis with a high efficiency of 1.23x10(6)mutants per microgram plasmid DNA. However, it could also be transposed into other Rhodococcus spp. at lower frequencies in comparison with that of R. erythropolis. It has been indicated by Southern hybridization that the generated kanamycin-resistant mutants were resulted from single transposition event of pTNR. The results also revealed that the transposable-marker gene of pTNR was randomly inserted into the chromosomal DNA of R. erythropolis. The affected DNA regions carrying the transposed DNA element could be conveniently recovered for further characterization using a plasmid rescue procedure. Sequence data of the insertion sites of 40 random mutants analyzed indicated that transposition of pTNR generated 6-bp direct target duplications in 36 cases, while in the remaining four mutants; it generated 5- or 7-bp target duplications (two cases each). This study concluded that pTNR could be served as an efficient genetic tool for construction of random mutagenesis system in Rhodococcus species.     

Construction of a modified mini-Tn5 luxCDABE transposon for the development of bacterial biosensors for ecotoxicity testing

A mini-Tn5 transposon was modified to introduce a promoterless luxCDABE cassette from Vibrio fischeri into environmentally relevant bacterial strains in order to develop bioluminescence-based biosensors for toxicity testing. The mini-Tn5 luxCDABE transposon was chromosomally integrated downstream from an active promoter into two Pseudomonas strains (Pseudomonas fluorescens 8866 and Pseudomonas putida F1). Characterisation of the bioluminescent transconjugants demonstrated that the transposon integration was stable and had no effect on growth rate. Both P. fluorescens 8866 Tn5 luxCDABE and P. putida F1 Tn5 luxCDABE were used to assess the toxicity of standard solutions (Cu, Zn and 3,5-DCP) as well as Cu- and 3,5-DCP-spiked groundwater samples. They were successfully used for bioluminescence-based bioassays and the potential value of using different bacterial biosensors for ecotoxicity testing was shown.     

Random transposition by Tn916 in Desulfitobacterium dehalogenans allows for isolation and characterization of halorespiration-deficient mutants

To allow for the molecular analysis of halorespiration by the strictly anaerobic gram-positive bacterium Desulfitobacterium dehalogenans, halorespiration-deficient mutants were selected and characterized following insertional mutagenesis by the conjugative transposon Tn916. To facilitate rapid screening of transconjugants, a highly efficient method for the growth of single colonies on solidified medium has been developed. A streptomycin-resistant mutant of D. dehalogenans was isolated and mated with Enterococcus faecalis JH2-2 carrying Tn916. Insertion of one or two copies of Tn916 into the chromosome of D. dehalogenans was observed. From a total of 2,500 transconjugants, 24 halorespiration-deficient mutants were selected based upon their inability to use 3-chloro-4-hydroxyphenylacetic acid as an electron acceptor. Physiological characterization led to the definition of three phenotypic classes of mutants that differed in their ability to use the additional terminal electron acceptors nitrate and fumarate. The activities of hydrogenase and formate dehydrogenase were determined, and the transposon insertion sites in selected mutants representing the different classes were analyzed on the sequence level following amplification by inverse PCR. The results of the molecular characterization as well as the pleiotropic phenotypes of most mutants indicate that genes coding for common elements shared by the different respiratory chains present in the versatile D. dehalogenans have been disrupted.     

Efficient amplification of multiple transposon-flanking sequences

Transposon mutagenesis is a very useful tool for gene identification in bacteria. Once the transposon mutants of interest are isolated, it is often necessary to identify the sequences that flank the transposon insertions. We devised an efficient method for specific amplification of transposon-flanking sequences that requires the sequence information of only transposon-specific sequences. The basic steps for this method consists of (1) digestion with a restriction enzyme, (2) ligation with a Y-shaped linker and (3) polymerase chain reaction amplification using a transposon-specific primer and a primer specific to the Y-shaped linker. The feasibility of this method was demonstrated with mini-Tn5 mutants of Salmonella typhimurium. We also found that this method can be used for simultaneous amplification of multiple transposon-flanking sequences.     

Molecular genetics of met 17 and met 25 mutants of Saccharomyces cerevisiae: intragenic complementation between mutations of a single structural gene

Summary A method for transposon mutagenesis in Azospirillum lipoferum 29708 is reported with transposon Tn5. The suicide plasmid pSUP2021 was used to deliver Tn5 in A. lipoferum using Escherichia coli SM10 as the donor. Neomycin-resistant transconjugants were detected at a frequency of 6x10^-6 per recipient. Different types of mutants were isolated, e.g. auxotrophic, coloured, IAA-negative, and IAA-overproducers. Among the auxotrophic mutants, cysteine and methionine requirers prevailed. Random Tn5-insertion with only one copy per mutant was demonstrated by Southern blotting and hybridization. Tn5-induced mutants are relatively stable, with reversion rates of 2–20×10^-8. A gene which is a part of the carotenoid pathway is closely linked to the histidine genes. The existence of two pathways for IAA production in A. lipoferum is discussed.     

利用mini-Tn10转座系统研究芽孢杆菌生物被膜形成相关基因

生物被膜对于细菌抵御外界环境的侵害具有重要的意义, 其形成和发展过程受到很多基因的调控和影响。本文利用mini-Tn10转座系统对野生型解淀粉芽孢杆菌NK10.BAhjaWT进行突变库的构建并随机选择400个转化子进行验证, 突变效率达到90%以上。从突变库中筛选到4株生物被膜缺陷株。经过鉴定, 上述突变株citB、citG、gpsA和yvfB基因发生插入突变。其中citB、citG和gpsA均与能量代谢相关, yvfB功能未知。本实验证明mini-Tn10转座系统对于芽孢杆菌突变库的构建具有高效和稳定的     

Construction of mini-Tn4001tet and its use in Mycoplasma gallisepticum

The Mollicutes are a group of cell-wall-less bacteria and are important plant and animal pathogens. Progress toward analyzing their pathogenic mechanisms has been hampered by the few available genetic tools. Of the two transposons shown to function in mycoplasmas, only Tn4001 is readily amenable to modification and development. One disadvantage of using Tn4001 in mycoplasmas has been independent insertion of the insertion sequence, IS256, probably as a result of inadequate control of the transposase expression in mycoplasmas. In this study, we describe the construction of a mini-Tn4001 containing the tetM antibiotic resistance gene from Tn916. The transposase gene was placed outside the inverted repeats to lower the frequency of independent transposition events. Transposition of mini-Tn4001tet in Mycoplasma gallisepticum occurred at a frequency of 1-8 x 10(-6), a frequency similar to that of the parent transposon. Insertions of mini-Tn4001tet were random and only single insertions were observed. Several unique restriction sites between the inverted repeat sequences provide for further development of mini-Tn4001.     

cis-trans isomerization of unsaturated fatty acids: cloning and sequencing of the cti gene from Pseudomonas putida P8.

Transposon mutants of Pseudomonas putida P8 were generated by applying a mini-Tn5 mutagenesis system. The mutants obtained were checked for their ability to tolerate increased temperatures and elevated phenol concentrations. Approximately 5,800 transposon mutants were used to generate a pool of 600 temperature-sensitive strains; one of these strains was identified as being damaged in its ability to perform cis-trans isomerization of fatty acids. A gene library of P. putida P8 was constructed and screened by using as a probe sequences immediately adjacent to the mini-Tn5 insertion. A DNA fragment that complemented the mutation was isolated and cloned. The corresponding gene, termed cti, is located close to the methionine synthase locus (metH) in P. putida P8. A cti-carrying fragment integrated into a plasmid also conferred the ability for cis-trans isomerization to Escherichia coli; the cti gene was completely sequenced, and the amino acid sequence was deduced.     

Transposon Tn5 mutagenesis of Pseudomonas fluorescens to isolate mutants deficient in antibacterial activity

Abstract Pseudomonas fluorescens was subjected to insertion mutagenesis studies using the transposon Tn5-GM to generate mutants deficient in antibacterial activity minus mutants. The transposon located on the temperature-sensitive plasmid pCHR84 was conjugally transferred into the non-pathogenic pseudomonad using the triparental mating procedure. Random integration of Tn 5 -GM into the chromosome of P. fluorescens was achieved by heat ttreatment of the transformed cells at 42°C. Approximately 2% of transconjugants revealed an auxotrophic phenotype indicating efficient integration of the employed transposon into the chromosome of P. fluorescens . One transposon insertion mutant was obtained showing an antibacterial activity minus phenotype. This mutant (MM-7) was found to be defective in the production of an unidentified antibacterial compound against B. subtilis . These results introduce Tn 5 transposon mutagenesis as a new useful tool for the molecular analysis of P. fluorescens .     

A highly efficient transposon mutagenesis system for the tomato pathogen Clavibacter michiganensis subsp. michiganensis.

A transposon mutagenesis system for Clavibacter michiganensis subsp. michiganensis was developed based on antibiotic resistance transposons that were derived from the insertion element IS1409 from Arthrobacter sp. strain TM1 NCIB12013. As a prerequisite, the electroporation efficiency was optimized by using unmethylated DNA and treatment of the cells with glycine such that about 5 x 10(6) transformants per microg of DNA were generally obtained. Electroporation of C. michiganensis subsp. michiganensis with a suicide vector carrying transposon Tn1409C resulted in approximately 1 x 10(3) transposon mutants per pg of DNA and thus is suitable for saturation mutagenesis. Analysis of Tn1409C insertion sites suggests a random mode of transposition. Transposition of Tn1409C was also demonstrated for other subspecies of C. michiganensis.     

胸膜肺炎放线杆菌萘啶酸抗性菌株的选育和信号标签突变株的构建

胸膜肺炎放线杆菌(APP)是重要的猪呼吸道病原菌,给世界养猪业造成严重的经济损失.信号标签突变(STM)技术是在宿主动物体内鉴定病原菌毒力因子的高通量方法.通过体外传代选育出APP血清1型和3型萘啶酸抗性菌株,再以萘啶酸抗性菌株为受体菌,以携带mini-Tn10的标签质粒(pLOF/TAG1-48)的E.coli CC118 λ pir或S17-1λpir为供体菌,在或不在E.coli DH5α(pRK2073)的辅助下,进行三亲本或两亲本接合,通过抗性筛选、PCR和Southern杂交鉴定转座突变株.结果表明:体外萘啶酸加压传代很容易选育出萘啶酸抗性APP菌株,该抗性的产生与DNA促旋酶A亚基基因gyrA的突变有关.在APP与E. coli接合实验中,两亲本接合比三亲本接合操作更简单,效率也较高;APP不同菌株在接合和转座效率上存在很大差异,血清1型菌株高于血清3型菌株,3型标准菌株高于地方分离株JL03-R.本研究为APP STM突变体库的构建与毒力基因的鉴定奠定了基础.