Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

Physical, mechanical, and antibacterial properties of chitosan/PEO blend films

Films formed by blending of two polymers usually have modified physical and mechanical properties compared to films made of the individual components. Our preliminary studies indicated that incorporation of chitosan in polyethylene oxide (PEO) films may provide additional functionality to the PEO films and may decrease their tendency to spherulitic crystallization. The objective of this study was to determine the correlation between chitosan/PEO weight ratio and the physical, mechanical, and antibacterial properties of corresponding films. Films with chitosan/PEO weight ratios from 100/0 to 50/50 in 10% increments were characterized by measuring thickness, puncture strength (PS), tensile strength (TS), elongation at break (%E), water vapor permeability (WVP), and water solubility (WS). Additionally, the films were examined by polarized microscopy, wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) spectroscopy, and their antibacterial properties were tested against Escherichia coli. The chitosan fraction contributes to antimicrobial effect of the films, decreases tendency to spherulitic crystallization of PEO, and enhances puncture and tensile strength of the films, while addition of the PEO results in thinner films with lower water vapor permeability. Films with 90/10 blend ratio of chitosan/PEO showed the most satisfactory PS, TS, %E, and antibacterial properties of all tested ratios.     

A Novel Multifunctional Crosslinking PVA/CMCS Hydrogel Containing Cyclic Peptide Actinomycin X2 and PA@Fe with Excellent Antibacterial and Commendable Mechanical Properties

Bacterial infected environments and resulting bacterial infections have been threatening the human health globally. Due to increased bacterial resistance caused by improper and excessive use of antibiotics, antibacterial biomaterials are being developed as alternatives to antibiotics in some cases. Herein, an advanced multifunctional hydrogel with excellent antibacterial properties, enhanced mechanical properties, biocompatibility and self-healing performance, was designed through freezing-thawing method. This hydrogel network is composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMCS), protocatechualdehyde (PA), ferric iron (Fe) and an antimicrobial cyclic peptide actinomycin X2 (Ac.X2). The double dynamic bonds among protocatechualdehyde (PA), ferric iron (Fe) and carboxymethyl chitosan containing coordinate bond (catechol-Fe) as well as dynamic Schiff base bonds and hydrogen bonds endowed the hydrogel with enhanced mechanical properties. Successful formation of hydrogel was confirmed through ATR-IR and XRD, and structural evaluation through SEM analysis, whereas mechanical properties were tested with electromechanical universal testing machine. The resulting PVA/CMCS/Ac.X2/PA@Fe (PCXPA) hydrogel has favorable biocompatibility and excellent broad-spectrum antimicrobial activity against both S. aureus (95.3 %) and E. coli (90.2 %) compared with free-soluble Ac.X2, which exhibited subpar performance against E. coli reported in our previous studies. This work provides a new insight on preparing multifunctional hydrogels containing antimicrobial peptides as antibacterial material.     

ICU下呼吸道多重耐药菌医院感染的病原学临床特征及易感因素分析

摘要 目的：研究ICU下呼吸道多重耐药菌医院感染的病原学临床特征及易感因素。方法：选择2020年1月到2022年12月于我院ICU住院治疗的216例下呼吸道感染者,按照是否发生多重耐药菌感染分为研究组113例,对照组103例。分析两组患者感染相关因素的数量分布情况,通过Logistic回归分析多重耐药菌医院感染的危险因素。采用全自动细菌鉴定仪对菌种进行鉴定,采用K-B纸片法进行药敏试验,并分析多重耐药菌感染的病原学分布及对常用抗菌药物的耐药性。结果：（1）与对照组相比,研究组患者感染相关因素的分布率更高;（2）住院时间>3个月、使用糖皮质激素治疗、应用机械通气治疗、其他细菌感染、血红蛋白含量<100 g/L、抗菌药物使用时间>15 d、抗菌药物使用种类>4种、使用免疫抑制剂是ICU下呼吸道多重耐药菌感染的危险因素;（3）113例研究组共培养出细菌菌株93株,其中革兰氏阴性菌52株（55.91%）,革兰氏阳性菌25株（26.88%）,革兰氏阴性菌中较多的是铜绿假单胞菌（22株）、鲍曼不动杆菌（13株）、肺炎克雷伯菌（12株）;革兰氏阳性菌中最多的是肺炎链球菌（11株）和金黄色葡萄球菌（11株）;（4）耐药情况：铜绿假单胞菌对莫西沙星耐药率较低（15.83%）,肺炎克雷伯菌对亚胺培南耐药率较低（17.56%）,鲍曼不动杆菌对头孢哌酮/舒巴坦耐药率较低（16.37%）,金黄色葡萄球菌、肺炎链球菌对万古霉素无耐药性。结论：住院时间>3个月、使用糖皮质激素治疗、应用机械通气治疗、其他细菌感染、血红蛋白含量<100 g/L、抗菌药物使用时间>15 d、抗菌药物使用种类>4种、使用免疫抑制剂是多重耐药感染的独立危险因素。本院ICU下呼吸道感染以革兰氏阴性杆菌为主,应根据病原菌选择耐药性低的药物,并针对危险因素采取有效措施。     

Novel starch/chitosan blending membrane: Antibacterial,permeable and mechanical properties

Antibacterial membranes were prepared from a mixture of hydrolyzed starch and chitosan. Glycerin was incorporated in the membranes to as plasticizer agent. The effects of component ratio on the mechanical and permeable properties of the prepared membranes were investigated. The elongation-at-break and water vapor transmission rate of starch/chitosan blending membranes were largely improved compared with each single component due to the interaction formed between the hydroxyl groups of starch and the amino ones of chitosan, which was confirmed by FT-IR characterizations. With the help of optical microscope, the influence of component ratio on the morphologies of starch/chitosan membranes was systematically investigated. It comes to a conclusion that extreme low or high starch content will cause an asymmetric membrane surface. To prove the antibacterial activity of obtained membranes, Escherichia coli (E. coli) was chosen as the target bacteria via optical density method. The resulted starch/chitosan membranes exhibited an outstanding antibacterial activity against E. coli.     

Multifunctional bionanocomposite films of poly(lactic acid), cellulose nanocrystals and silver nanoparticles

Nanocomposite films were prepared by the addition of cellulose nanocrystals (CNCs) eventually surfactant modified (s-CNC) and silver (Ag) nanoparticles in the polylactic acid (PLA) matrix using melt extrusion followed by a film formation process. Multifunctional composite materials were investigated in terms of morphological, mechanical, thermal and antibacterial response. The nanocomposite films maintained the transparency properties of the PLA matrix. Thermal analysis showed increased values of crystallinity in the nanocomposites, more evident in the s-CNC based formulations that had the highest tensile Young modulus. The presence of surfactant favoured the dispersion of cellulose nanocrystals in the polymer matrix and the nucleation effect was remarkably enhanced. Moreover, an antibacterial activity against Staphylococcus aureus and Escherichia coli cells was detected for ternary systems, suggesting that these novel nanocomposites may offer good perspectives for food packaging applications which require an antibacterial effect constant over time.     

Preparation and Characterization of a Silk Fibroin/Polyurethane Fiber Blend Membrane Containing Actinomycin X2 with Excellent Mechanical Properties and Enhanced Antibacterial Activities

Development of suitable antimicrobial biomaterials for hygienic wound dressing and healing is an important requirement for medical application. Durable mechanical properties increase the application range of biomaterial in different environmental and biological conditions. Due to the inherent brittleness of silk fibroin (SF), polyurethane fiber (PUF) was used to modify SF containing actinomycin X2 (Ac.X2) to prepare silk fibroin@actinomycin X₂/polyurethane fiber (ASF/PUF) blend membranes. The ASF/PUF blend membrane was developed by solution casting method. Incorporation of PUF improved the flexibility of material and introduction of Ac.X2 has increased antibacterial activity of materials. Excellent mechanical properties (tensile strength up to 25.7 MPa and elongation at break up to 946.5 %) of 50 % SF+50 % PUF blend membrane were proved by tensile testing machine. FT-IR spectra, TGA, contact angle and DMA were tested to prove the blend membrane's physico-chemical characteristics. ASF/PUF blend membrane displayed satisfactory antibacterial activity against S. aureus, and the cytotoxicity tests showed that the blend membrane has better biosafety compared to directly applied Ac.X2 in soluble form. These results suggest that the modification of SF through PUF for development of flexible antibacterial membranes has great potential application value in the field of silk-like material fabrication.     

Cu/PAA的制备及其抗菌性能研究

采用两步阳极氧化法制备出孔径为75nm的多孔阳极氧化铝(PAA75),并使用交流电沉积技术在PAA75孔道内装载纳米Cu。采用场发射扫描电镜(FESEM)观察样品微观形貌,进一步采用X射线衍射(XRD)、X射线光电子能谱分析(XPS)对材料化学组成及晶型进行了表征和分析。选用大肠杆菌(E.coli ATCC 8099)和金黄色葡萄球菌(S.aureus ATCC6538)测试Cu/PAA的抗菌性能。研究结果表明,本方法制备的Cu/PAA中Cu主要以Cu0存在,并且Al和Cu所占原子比为17.77∶0.71。体外抗菌测试表明,Cu(10s)/PAA对E.coli的1d、2d和3d抑菌率分别为82%±11%、78%±7%和45%±4%,对S.aureus的1d、2d和3d抑菌率分别为89%±4%、75%±8%和56%±11%。     

Mechanical and water barrier properties of starch/PVA composite films by adding nano-sized poly(methyl methacrylate-co-acrylamide) particles

The aim of this work is to prepare starch/PVA composite films added nano-sized poly(methyl methacrylate-co-acrylamide) (PMMA-co-AAm) particles and to investigate the mechanical properties, water barrier properties, and soil burial degradation for the films. Composite films were prepared by using corn starch, polyvinyl alcohol (PVA), nano-sized PMMA-co-AAm particles, and additives, i.e., glycerol (GL), xylitol (XL), and citric acid (CA). Nano-sized PMMA-co-AAm particles were synthesized by emulsion polymerization. The results of the evaluation of properties for prepared films indicated that compared with films without PMMA-co-AAm particles, the mechanical properties and water resistance were improved up to 70-400% by the addition of nano-sized PMMA-co-AAm. In addition, the results of the soil burial biodegradation revealed that films added PMMA-co-AAm particles were degraded by about 45-65% after 165 days.     

Antibacterial performance of nanoscaled visible-light responsive platinum-containing titania photocatalyst in vitro and in vivo

Background

Traditional antibacterial photocatalysts are primarily induced by ultraviolet light to elicit antibacterial reactive oxygen species. New generation visible-light responsive photocatalysts were discovered, offering greater opportunity to use photocatalysts as disinfectants in our living environment. Recently, we found that visible-light responsive platinum-containing titania (TiO₂–Pt) exerted high performance antibacterial property against soil-borne pathogens even in soil highly contaminated water. However, its physical and photocatalytic properties, and the application in vivo have not been well-characterized.

Methods

Transmission electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, ultraviolet–visible absorption spectrum and the removal rate of nitrogen oxides were therefore analyzed. The antibacterial performance under in vitro and in vivo conditions was evaluated.

Results

The apparent quantum efficiency for visible light illuminated TiO₂–Pt is relatively higher than several other titania photocatalysts. The killing effect achieved approximately 2 log reductions of pathogenic bacteria in vitro. Illumination of injected TiO₂–Pt successfully ameliorated the subcutaneous infection in mice.

Conclusions

This is the first demonstration of in vivo antibacterial use of TiO₂–Pt nanoparticles. When compared to nanoparticles of some other visible-light responsive photocatalysts, TiO₂–Pt nanoparticles induced less adverse effects such as exacerbated platelet clearance and hepatic cytotoxicity in vivo.

General significance

These findings suggest that the TiO₂–Pt may have potential application on the development of an antibacterial material in both in vitro and in vivo settings.     

Synthesis and characterization of zinc oxide nanoparticles by using polyol chemistry for their antimicrobial and antibiofilm activity

The present investigation deals with facile polyol mediated synthesis and characterization of ZnO nanoparticles and their antimicrobial activities against pathogenic microorganisms. The synthesis process was carried out by refluxing zinc acetate precursor in diethylene glycol(DEG) and triethylene glycol(TEG) in the presence and in the absence of sodium acetate for 2 h and 3 h. All synthesized ZnO nanoparticles were characterized by X-ray diffraction (XRD), UV visible spectroscopy (UV), thermogravimetric analysis (TGA), fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy(FESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX) technique. All nanoparticles showed different degree of antibacterial and antibiofilm activity against Gram-positive Staphylococcus aureus (NCIM 2654)and Gram-negative Proteus vulgaris (NCIM 2613). The antibacterial and antibiofilm activity was inversely proportional to the size of the synthesized ZnO nanoparticles. Among all prepared particles, ZnO nanoparticles with least size (~ 15 nm) prepared by refluxing zinc acetate dihydrate in diethylene glycol for 3 h exhibited remarkable antibacterial and antibiofilm activity which may serve as potential alternatives in biomedical application.     

Eco-friendly synthesis of silver nanoparticles from the whole plant of Cleome viscosa and evaluation of their characterization,antibacterial, antioxidant and antidiabetic properties

The current research is to develop an easy and eco-friendly method for the synthesis of three different concentrations of silver nanoparticles (1mMCvAgNPs, 2mMCvAgNPs and 3mMCvAgNPs) using aqueous whole plant extract of Cleome viscosa and to evaluate their antibacterial, antioxidant and antidiabetic properties. CvAgNPs were characterized by Using UV–vis spectrophotometer, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and transmission electron microscope (TEM). The formation of CvAgNPs was confirmed by the observation of band between 250 nm to 600 nm UV–vis spectrum. The crystalline structure of CvAgNPs with a face-centered cubic (FCC) was confirmed by XRD. The responsible phytochemicals for the reduction and capping material of CvAgNPs were observed with FT-IR. The SEM analysis confirmed the size and shapes of CvAgNPs. The CvAgNPs have shown the rich content of total phenolic and total flavonoid components. The CvAgNPs have shown significant antibacterial activity on multi drug resistance Gram-negative and Gram-positive bacteria and also have shown significant strong antioxidant activities (DPPH, ABTS, H₂O₂ scavenging, Phosphomolybdenum assay and reducing power). The inhibitory action of CvAgNPs on α-glucosidase and α-amylase was stronger than the inhibitory action of acarbose. To best of our knowledge, this is the first attempt on the synthesis of AgNPs using C. viscosa whole plant aqueous extract. The synthesized CvAgNPs exhibited good antimicrobial, antioxidant and antidiabetic properties. Hence, to validate our results, the in vivo studies at the molecular level are needed to develop Cleome viscosa as an antibacterial, antioxidant and anti-diabetic agent.     

Chemical composition,antibacterial and antifungal activities of flowerhead and root essential oils of Santolina chamaecyparissus L., growing wild in Tunisia

The antimicrobial properties of essential oil from various Santolina species have not been investigated enough in the previous studies dealing with the biological activities of medicinal plants. In Tunisia, Santolina chamaecyparissus L. (Asteraceae) is the only Santolina species recorded and is used as vermifuge and emmenagogue. The chemical composition, antibacterial and antifungal properties of essential oils from the flowerheads and roots of spontaneous S. chamaecyparissus growing in Tunisia and the chemical composition which leads to the Tunisian chemotype are investigated here for the first time. Essential oils isolated by hydro distillation from flowerheads and roots of S. chamaecyparissus were analyzed by GC and GC/MS. Two methods served for antimicrobial assays of the essential oils: diffusion in a solid medium and micro-well dilution assay. Antifungal tests were carried out by the agar incorporation method. Sixty-seven constituents were identified from the essential oil of the flowerhead. The major constituents were: 1,8-cineole and β-eudesmol. Two non identified compounds were present at the highest concentration in root oil. Flowerhead oil was characterized by high contents in monoterpenes and sesquiterpenes oxygenated compounds. The flowerhead essential oil demonstrated potent of antibacterial properties against Pseudomonas aeruginosa ATCC and Enterococcus faecalis ATCC, with MIC of 0.625 μg/ml. These findings demonstrate that the flowerhead essential oils of S. chamaecyparissus have excellent antibacterial properties and for this reason they could contribute to decrease the problem of microbial resistance to antibiotics.     

内镜下乳头括约肌切开术联合不同时长气囊扩张术治疗胆总管结石的疗效观察

摘要 目的：探讨内镜下乳头括约肌小切开术( endoscopic sphincterotomy,EST)联合不同时长持续时间十二指肠乳头气囊扩张术（Endoscopic papillary balloon dilatation,,EPBD）对胆总管结石患者治疗效果差异。方法：选择2018年1月至2018年12月于我院接受EST联合EPBD治疗的92例胆总管结石患者为研究对象, 按照其术中气囊扩张时间的不同将其分为A组（46例,扩张时间20 s）、B组（46例,扩张时间40 s）,对比两组患者一次净石率、机械碎石率、操作时间及X线暴露时间,对比两组患者术前及术后肝功能指标,术后12 h血淀粉酶,对比两组患者术后胰腺炎、消化道出血、胆道感染、穿孔等并发症的发生率。结果：（1）对比显示两组患者一次净石率、机械碎石率、操作时间、X线暴露时间及12 h血淀粉酶对比差异不具有统计学意义（P>0.05）;（2）术前两组患者总胆红素(Total bilirubin,TBIL)、谷氨酸转氨酶(Glutamate aminotransferase,ALT)、碱性磷酸酶(alkaline phosphatase,ALP)对比差异不具有统计学意义（P>0.05）,术后两组患者上述指标均较治疗前出现明显的下降,但组间比较无差异（P>0.05）;（3）A组患者术后各类并发症发生率为4.35 %（2/46）,B组患者术后各类并发症发生率为17.39 %（8/46）,两组对比差异具有统计学意义（P<0.05）。结论：EST联合EPBD对胆总管结石具有较好的治疗效果,术中不同气囊扩张时间不会对手术成功率、手术时间等指标造成影响,但长时间扩张存在增加术后出血的风险,建议在能够正常实施手术的情况下尽量控制术中气囊扩张时间。     

A Comparative Study Between the Antibacterial Effect of Nisin and Nisin-Loaded Chitosan/Alginate Nanoparticles on the Growth of Staphylococcus aureus in Raw and Pasteurized Milk Samples

The aim of this study was to evaluate the antibacterial effect of nisin-loaded chitosan/alginate nanoparticles as a novel antibacterial delivery vehicle. The nisin-loaded nanoparticles were prepared using colloidal dispersion of the chitosan/alginate polymers in the presence of nisin. After the preparation of the nisin-loaded nanoparticles, their physicochemical properties such as size, shape, and zeta potential of the formulations were studied using scanning electron microscope and nanosizer instruments, consecutively. FTIR and differential scanning calorimetery studies were performed to investigate polymer–polymer or polymer–protein interactions. Next, the release kinetics and entrapment efficiency of the nisin-loaded nanoparticles were examined to assess the application potential of these formulations as a candidate vector. For measuring the antibacterial activity of the nisin-loaded nanoparticles, agar diffusion and MIC methods were employed. The samples under investigation for total microbial counts were pasteurized and raw milks each of which contained the nisin-loaded nanoparticles and inoculated Staphylococcus aureus (ATCC 19117 at 10⁶ CFU/mL), pasteurized and raw milks each included free nisin and S. aureus (10⁶ CFU/mL), and pasteurized and raw milks each had S. aureus (10⁶ CFU/mL) in as control. Total counts of S. aureus were measured after 24 and 48 h for the pasteurized milk samples and after the time intervals of 0, 6, 10, 14, 18, and 24 h for the raw milk samples, respectively. According to the results, entrapment efficiency of nisin inside of the nanoparticles was about 90–95%. The average size of the nanoparticles was 205 nm, and the average zeta potential of them was ?47 mV. In agar diffusion assay, an antibacterial activity (inhibition zone diameter, at 450 IU/mL) about 2 times higher than that of free nisin was observed for the nisin-loaded nanoparticles. MIC of the nisin-loaded nanoparticles (0.5 mg/mL) was about four times less than that of free nisin (2 mg/mL). Evaluation of the kinetic of the growth of S. aureus based on the total counts in the raw and pasteurized milks revealed that the nisin-loaded nanoparticles were able to inhibit more effectively the growth of S. aureus than free nisin during longer incubation periods. In other words, the decrease in the population of S. aureus for free nisin and the nisin-loaded nanoparticles in pasteurized milk was the same after 24 h of incubation while lessening in the growth of S. aureus was more marked for the nisin-loaded nanoparticles than the samples containing only free nisin after 48 h of incubation. Although the same growth reduction profile in S. aureus was noticed for free nisin and the nisin-loaded nanoparticles in the raw milk up to 14 h of incubation, after this time the nisin-loaded nanoparticles showed higher growth inhibition than free nisin. Since, generally, naked nisin has greater interactions with the ingredients present in milk samples in comparison with the protected nisin. Therefore, it is concluded that the antibacterial activity of nisin naturally decreases more during longer times of incubation than the protected nisin with the chitosan/alginate nanoparticles. Consequently, this protection increases and keeps antibacterial efficiency of nisin in comparison with free nisin during longer times of storage. These results can pave the way for further research and use of these nanoparticles as new antimicrobial agents in various realms of dairy products.     

Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation

A series of excellent hydrogels were prepared from poly(vinyl alcohol) (PVA) and carboxymethylated chitosan (CM-chitosan) with electron beam irradiation (EB) at room temperature. Electron spectroscopy analysis of the blend hydrogels revealed that good miscibility was sustained between CM-chitosan and PVA. The properties of the prepared hydrogels, such as the mechanical properties, gel fraction and swelling behavior were investigated. The mechanical properties and equilibrium degree of swelling improved obviously after adding CM-chitosan into PVA hydrogels. The gel fraction determined gravimetrically showed that a part of CM-chitosan was immobilized onto PVA hydrogel. The further analyses of FTIR and DSC spectra of the prepared gels after extracting sol manifested that there was a grafting interaction between PVA and CM-chitosan molecules under irradiation. The antibacterial activity of the hydrogels against Escherichia coli was also measured via optical density method. The blend hydrogels exhibited satisfying antibacterial activity against E. coli, even when the CM-chitosan concentration was only 3 wt%.     

Surface reactivity and in vitro biological evaluation of sol gel derived silver/calcium silicophosphate bioactive glass

Ag ions are known for their antibacterial effects. Ag containing silicate glasses have been extended to create bioactive glasses that exhibit inhibitory effects on bacterial growth using different techniques. In this work, calcium and calcium/silver silicophosphate glasses were synthesized from the sol-gel process and their physicochemical and in vitro biological properties were studied and compared. The effect of silver concentration on in vitro bioactivity and antibacterial properties of the glasses was investigated. Ag₂O was substituted for CaO in the glass formula up to 2 mol% and in vitro bioactivity of the samples was evaluated by soaking them in simulated body fluid followed by structural characterization using XRD, FTIR and SEM techniques. The results showed that both glasses favored precipitation of the calcium phosphate layer when they were soaked in simulated body fluid; however, the morphology of apatite crystals changed for the 2% mol silver containing sample. Substitution of 2% mol Ag₂O for CaO seemed to slightly stimulate the rate of precipitation. The in vitro biodegradation rate of the silver/ calcium silicophosphate glasses was lower than that of the silver-free one (control). Also, the antibacterial properties of the samples indicated that these effects were improved by increasing silver concentration in bioactive glass composition.     

Preparation of silver nanoparticles and riboflavin embedded electrospun polymer nanofibrous scaffolds for in vivo wound dressing application

Biocompatible silver-based nanofibrous frameworks have attracted intensive attention in wound dressing materials ascribed to their greater stability, minimal toxicity, excellent antibacterial activity, and extended therapeutic efficiency. The present investigation delineates a simple approach to synthesize silver nanoparticles (Ag NPs), and riboflavin (RF) decorated polyvinyl alcohol/β-Cyclodextrin (PVA/β-CD) electrospun nanofibrous scaffolds envisioning their application in wound dressings. PVA/β-CD polymer matrix regulates the stabilization of Ag NPs and RF. Also, it promotes the wound healing process and skin regeneration. The morphology, thermal properties, and their structure were also evaluated. Likewise, mechanical properties, biodegradation and drug release profile of the nanofibrous scaffolds were evaluated. In addition Antibacterial studies of the resultant nanofibrous scaffolds showed a strong inhibitory effect against Staphylococcus aureus and Escherichia coli at a considerable level. Moreover, Ag NPs-RF/PVA/β-CD nanofibrous scaffold were studied for its in vitro cytotoxicity using human embryonic kidney cells (HEK-293), and the results suggested that Ag NPs and RF present in the nanofibrous scaffolds exhibited its cytotoxicity. Besides, wound healing efficiency of the Ag NPs-RF decorated nanofibrous scaffolds was assessed using full thickness excision wounds in rat models displayed as an excellent biomaterial for wound dressings.     

Antibacterial Activity and Kinetics of Litsea cubeba Oil on Escherichia coli

Litsea cubeba oil is extracted from the fresh fruits of Litsea cubeba by distillation. In this study, its chemical constituents, antibacterial activity, kinetics and effects against Escherichia coli were studied. Its minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were both 0.125% (v/v) by toxic food method. Moreover, the antibacterial kinetic curves indicated 0.0625% (v/v) of litsea cubeba oil was able to prolong the growth lag phase of E. coli cells to approximate 12 hours while 0.125% (v/v) of litsea cubeba oil was able to kill the cells completely. Furthermore, transmission electron microscope (TEM) observation showed most E. coli cells treated with 0.125% (v/v) of litsea cubeba oil were killed or destroyed severely within 2 hours. The litsea cubeba oil might penetrate and destroy the outer and inner membrane of E. coli cells. Thus many holes and gaps were observed on the damaged cells, which led to their death eventually. The antibacterial effects of litsea cubeba oil mainly attributed to the presence of aldehydes, which accounted for approximately 70% in its whole components analyzed by GC/MS. Based on the antimicrobial properties, litsea cubeba oil would have a broad application in the antimicrobial industry.     

Preparation and properties of alginate/carboxymethyl chitosan blend fibers

Alginate/carboxymethyl chitosan blend fibers, prepared by spinning their mixture solution through a viscose-type spinneret into a coagulating bath containing aqueous CaCl₂, were studied for structure and properties with the aid of infrared spectroscopy (IR), X-ray diffraction (XRD) and scanning electron micrography (SEM). The analyses indicated a good miscibility between alginate and carboxymethyl chitosan, because of the strong interaction from the intermolecular hydrogen bonds. The best values of the dry tensile strength and breaking elongation were obtained when carboxymethyl chitosan content was 30 and 10 wt%, respectively. The wet tensile strength and breaking elongation decreased with the increase of carboxymethyl chitosan content. Introduction of CM-chitosan in the blend fiber improved water-retention properties of blend fiber compared to pure alginate fiber. Antibacterial fibers, obtained by treating the fibres with aqueous solution of N-(2-hydroxy)-propyl-3-trimethylammonium chitosan chloride and silver nitrate, respectively, exhibited good antibacterial activity to Staphylococcus aureus.