Bacterial leader peptidase,a membrane protein without a leader peptide,uses the same export pathway as pre-secretory proteins

Leader peptidase typifies a group of proteins of the plasma membrane of E. coli which span the membrane and are synthesized without a cleaved amino-terminal leader (signal) sequence. The membrane assembly properties of these proteins have not been previously reported. We find that the membrane electrochemical potential is necessary for the insertion of a large domain of leader peptidase across the membrane. In the absence of potential, the peptidase accumulates inside the cell in tight association with the. plasma membrane. Upon restoration of the potential, accumulated peptidase inserts across the membrane, indicating that this insertion is not mechanistically coupled to polypeptide chain growth. The normal, trans-bilayer peptidase and that which accumulates in the absence of potential have different conformations, as shown by the relative resistance of the trans-bilayer enzyme to digestion by trypsin or chymotrypsin in cell lysates. Membrane insertion is accompanied by this conformational change. This assembly reaction has several features predicted by the hypothesis of membrane-triggered folding.     

Topology analysis of the SecY protein, an integral membrane protein involved in protein export in Escherichia coli.

The secY (prlA) gene product is an essential component of the Escherichia coli cytoplasmic membrane, and its function is required for the translocation of exocytoplasmic proteins across the membrane. We have analyzed the orientation of the SecY protein in the membrane by examining the hydropathic character of its amino acid sequence, by testing its susceptibility to proteases added to each side of the membrane, and by characterizing SecY-PhoA (alkaline phosphatase) hybrid proteins constructed by TnphoA transpositions. The orientation of the PhoA portion of the hybrid protein with respect to the membrane was inferred from its enzymatic activity as well as sensitivity to external proteases. The results suggest that SecY contains 10 transmembrane segments, five periplasmically exposed parts, and six cytoplasmic regions including the amino- and carboxyterminal regions.     

Structure,function, and biogenesis of SecY,an integral membrane protein involved in protein export

TheE. coli secY (prlA) gene, located in the operator-distal part of thespec ribosomal protein operon, codes for an integral membrane protein, SecY. The phenotypes of temperature-sensitive and cold-sensitive mutations insecY suggest that the SecY protein plays an essential rolein vivo to facilitate protein translocation, whereas theprlA mutations in this gene suggest that SecY may interact with the signal sequence of translocating polypeptides. SecY contains most probably six cytoplasmic and five periplasmic domains, as well as 10 transmembrane segments. Such membrane-embedded structure may confer the SecY protein a translocator function, in which it provides a proteinaceous pathway for passage of secreted as well as membrane proteins. Results obtained byin vitro analyses of the translocation reactions, as well as some new phenotypes of thesecY mutants, are consistent with this notion. Possible interaction of SecY with other secretion and chaperone-like factors is also discussed.     

Export of Escherichia coli alkaline phosphatase attached to an integral membrane protein, SecY

The SecY protein is a membrane-bound factor required for bacterial protein export and embedded in the cytoplasmic membrane by its 10 transmembrane segments. We previously proposed a topology model for this protein by adapting the Manoil-Beckwith TnphoA approach, a genetic method to assign local disposition of a membrane protein from the enzymatic activity of the alkaline phosphatase (PhoA) mature sequence attached to the various regions. SecY-PhoA hybrid proteins with the PhoA domain exported to the periplasmic side of the membrane have been obtained at the five putative periplasmic domains of the SecY sequence. We now extended this method to apply it to follow export of the newly synthesized PhoA domain. Trypsin treatment of detergent-solubilized cell extracts digested the internalized (unfolded) PhoA domain but not those exported and correctly folded. One of the hybrid proteins was cleaved in vivo after export to the periplasm, providing a convenient indication for the export. Results of these analyses indicate that export of the PhoA domain attached to different periplasmic regions of SecY occurs rapidly and requires the normal functioning of the secY gene supplied in trans. Thus, this membrane protein with multiple transmembrane segments contains multiple export signals which can promote rapid and secY-dependent export of the PhoA mature sequence attached to the carboxyl-terminal sides.     

Hen oviduct signal peptidase is an integral membrane protein

Membrane preparations from rough endoplasmic reticulum of hen oviduct resemble those of dog pancreas in their capacity to translocate nascent secretory proteins into membrane vesicles present during cell-free protein synthesis. As with the dog membranes, the precursor form of human placental lactogen is transported into the vesicles and processed to the native secretory form by an associated "signal peptidase." The oviduct microsomal membranes glycosylate nascent ovomucoid and ovalbumin in vitro. Attempts to extract the signal peptidase from these membrane vesicles revealed that it is one of the least easily solubilized proteins. A protocol for enrichment of signal peptidase was developed that took advantage of its tight association with these vesicles. These studies indicate that the enzyme has the characteristics of an integral membrane protein which remains active in membrane vesicles even after extraction with low concentrations of detergent that do not dissolve the lipid bilayer or after disruption of membrane vesicles in ice-cold 0.1 M Na2CO3, pH 11.5 (Fujiki, Y., Hubbard, A. L., Fowler, S., and Lazarow, P.B. (1982) J. Cell Biol. 93, 97-102), which releases the majority of membrane-associated proteins. Solubilization requires concentrations of nondenaturing detergents that totally dissolve the lipid bilayer. The detergent-solubilized enzyme retains the activity and the characteristic specificity of the membrane-bound form.     

SecY and integral membrane components of the Escherichia coli protein translocation system

Genetic approaches can address the question of how integral membrane Sec factors interact with each other and facilitate protein translocation across the cytoplasmic membrane of E. coli. This review summarizes genetic analyses of SecY, SecE and some other protein translocation factors, utilizing 'prl' mutations, 'sec' mutations, 'suppressor-directed inactivation', 'Sec titration', dominant negative mutations and their suppressors. Evidence suggests that co-ordinate participation of SecY, SecE, SecD, SecF, and probably some other factors, is crucial for the process.     

The purified E. coli integral membrane protein SecY/E is sufficient for reconstitution of SecA-dependent precursor protein translocation

We have previously reconstituted the soluble phase of precursor protein translocation in vitro using purified proteins (the precursor proOmpA, the chaperone SecB, and the ATPase SecA) in addition to isolated inner membrane vesicles. We now report the isolation of the SecY/E protein, the integral membrane protein component of the E. coli preprotein translocase. The SecY/E protein, reconstituted into proteoliposomes, acts together with SecA protein to support translocation of proOmpA, the precursor form of outer membrane protein A. This translocation requires ATP and is strongly stimulated by the protonmotive force. The initial rates and the extents of translocation into either native membrane vesicles or proteoliposomes with pure SecY/E are comparable. The SecY/E protein consists of SecY, SecE, and an additional polypeptide. Antiserum against SecY immunoprecipitates all three components of the SecY/E protein.     

SecY alterations that impair membrane protein folding and generate a membrane stress

We report on a class of Escherichia coli SecY mutants that impair membrane protein folding. The mutants also up-regulate the Cpx/sigma(E) stress response pathways. Similar stress induction was also observed in response to a YidC defect in membrane protein biogenesis but not in response to the signal recognition particle-targeting defect or in response to a simple reduction in the abundance of the translocon. Together with the previous contention that the Cpx system senses a protein abnormality not only at periplasmic and outer membrane locations but also at the plasma membrane, abnormal states of membrane proteins are postulated to be generated in these secY mutants. In support of this notion, in vitro translation, membrane integration, and folding of LacY reveal that mutant membrane vesicles allow the insertion of LacY but not subsequent folding into a normal conformation recognizable by conformation-specific antibodies. The results demonstrate that normal SecY function is required for the folding of membrane proteins after their insertion into the translocon.     

Solution NMR of signal peptidase, a membrane protein

Useful solution nuclear magnetic resonance (NMR) data can be obtained from full-length, enzymatically active type I signal peptidase (SPase I), an integral membrane protein, in detergent micelles. Signal peptidase has two transmembrane segments, a short cytoplasmic loop, and a 27-kD C-terminal catalytic domain. It is a critical component of protein transport systems, recognizing and cleaving amino-terminal signal peptides from preproteins during the final stage of their export. Its structure and interactions with the substrate are of considerable interest, but no three-dimensional structure of the whole protein has been reported. The structural analysis of intact membrane proteins has been challenging and only recently has significant progress been achieved using NMR to determine membrane protein structure. Here we employ NMR spectroscopy to study the structure of the full-length SPase I in dodecylphosphocholine detergent micelles. HSQC-TROSY spectra showed resonances corresponding to approximately 3/4 of the 324 residues in the protein. Some sequential assignments were obtained from the 3D HNCACB, 3D HNCA, and 3D HN(CO) TROSY spectra of uniformly ²H, ¹³C, ¹⁵N-labeled full-length SPase I. The assigned residues suggest that the observed spectrum is dominated by resonances arising from extramembraneous portions of the protein and that the transmembrane domain is largely absent from the spectra. Our work elucidates some of the challenges of solution NMR of large membrane proteins in detergent micelles as well as the future promise of these kinds of studies.     

The SecY membrane component of the bacterial protein export machinery: analysis by new electrophoretic methods for integral membrane proteins.

The product of the secY (prlA) gene (the SecY protein) involved in protein export in Escherichia coli was overproduced and localized in the cytoplasmic (inner) membrane. Because of its strong interaction with a non-ionic detergent (NP40), it partitioned into the detergent layer during electroblotting through a NP40-containing gel (detergent blotting), and it formed a horizontal streak in the O'Farrell two-dimensional gel electrophoretic system. Consequently, we developed an alternative two-dimensional gel procedure, which proved useful for analysis of integral membrane proteins, especially in combination with detergent blotting. SDS-gel electrophoresis was carried out successively through gels of lower (first dimension) and higher (second dimension) sieving effects. Many membrane proteins, unlike soluble proteins, formed spots off and above the diagonal line, and all of these spots partitioned exclusively into the detergent layer. A characteristic pattern of integral membrane proteins of E. coli was thus obtained and the spot of the SecY protein in the cytoplasmic membrane was identified even when it was not overproduced. These results show that the gene secY specifies an integral membrane component of the protein export machinery.     

Solution NMR of signal peptidase, a membrane protein

Useful solution nuclear magnetic resonance (NMR) data can be obtained from full-length, enzymatically active type I signal peptidase (SPase I), an integral membrane protein, in detergent micelles. Signal peptidase has two transmembrane segments, a short cytoplasmic loop, and a 27-kD C-terminal catalytic domain. It is a critical component of protein transport systems, recognizing and cleaving amino-terminal signal peptides from preproteins during the final stage of their export. Its structure and interactions with the substrate are of considerable interest, but no three-dimensional structure of the whole protein has been reported. The structural analysis of intact membrane proteins has been challenging and only recently has significant progress been achieved using NMR to determine membrane protein structure. Here we employ NMR spectroscopy to study the structure of the full-length SPase I in dodecylphosphocholine detergent micelles. HSQC-TROSY spectra showed resonances corresponding to approximately 3/4 of the 324 residues in the protein. Some sequential assignments were obtained from the 3D HNCACB, 3D HNCA, and 3D HN(CO) TROSY spectra of uniformly 2H, 13C, 15N-labeled full-length SPase I. The assigned residues suggest that the observed spectrum is dominated by resonances arising from extramembraneous portions of the protein and that the transmembrane domain is largely absent from the spectra. Our work elucidates some of the challenges of solution NMR of large membrane proteins in detergent micelles as well as the future promise of these kinds of studies.     

An integral membrane protein of the pore membrane domain of the nuclear envelope contains a nucleoporin-like region

We have identified an integral membrane protein of 145 kD (estimated by SDS-PAGE) of rat liver nuclear envelopes that binds to WGA. We obtained peptide sequence from purified p145 and cloned and sequenced several cDNA clones and one genomic clone. The relative molecular mass of p145 calculated from its complete, cDNA deduced primary structure is 120.7 kD. Antibodies raised against a synthetic peptide represented in p145 reacted monospecifically with p145. In indirect immunofluorescence these antibodies gave punctate staining of the nuclear envelope. Immunogold EM showed specific decoration of the nuclear pores. Thus p145 is an integral membrane protein located specifically in the "pore membrane" domain of the nuclear envelope. To indicate this specific location, and based on its calculated relative molecular mass, the protein is termed POM 121 (pore membrane protein of 121 kD). The 1,199- residue-long primary structure shows a hydrophobic region (residues 29- 72) that is likely to form one (or two adjacent) transmembrane segment(s). The bulk of the protein (residues 73-1199) is predicted to be exposed not on the cisternal side but on the pore side of the pore membrane. It contains 36 consensus sites for various kinases. However, its most striking feature is a repetitive pentapeptide motif XFXFG that has also been shown to occur in several nucleoporins. This nucleoporin- like domain of POM 121 is proposed to function in anchoring components of the nuclear pore complex to the pore membrane.     

In vitro insertion of leader peptidase into Escherichia coli membrane vesicles.

Leader peptidase is an integral protein of the Escherichia coli cytoplasmic membrane whose topology is known. We have taken advantage of this knowledge and available mutants of this enzyme to develop a genetic test for a cell-free protein translocation reaction. We report that leader peptidase inserted into inverted plasma membrane vesicles in its correct transmembrane orientation. We have examined the in vitro membrane assembly characteristics of a variety of leader peptidase mutants and found that domains required for insertion in vivo are also necessary for insertion in vitro. These data demonstrate the physiological validity of the in vitro insertion reaction and strengthen the use of this in vitro protein translocation reaction for the dissection of this complex sorting pathway.     

Identification of potential active-site residues in the Escherichia coli leader peptidase.

Leader peptidase of Escherichia coli cleaves the leader sequence from the amino terminus of membrane and secreted proteins after these proteins insert across the membrane. Despite considerable research, the mechanism of catalysis of leader peptidase remains unknown. This peptidase cannot be classified using protease inhibitors to the serine, cysteine, aspartic acid, or metallo- classes of proteases (Zwizinski, C., Date, T., and Wickner, W. (1981) J. Biol. Chem. 256, 3593-3597). Using site-directed mutagenesis, we have attempted to place leader peptidase in one of these groups. We found that leader peptidase, lacking all of the cysteine residues, can cleave the leader peptide from procoat, the precursor to bacteriophage M13 coat protein. Replacement of each histidine residue with an alanyl residue was without effect on catalysis. Among all the serine and aspartic acid residues, serine 90 and serine 185 as well as aspartic acid 99, 153, 273, and 276 are necessary to cleave procoat in a detergent extract. However, only serine 90 and aspartic acid 153 were required for processing using a highly sensitive in vivo assay. In addition to the residues directly affecting catalysis, aspartic acid 99 plays a role in maintaining the structure of leader peptidase. Replacement of this residue with alanine results in a very unstable leader peptidase protein. This study thus defines two critical residues, serine 90 and aspartic acid 153, that may be directly involved in catalysis and provides evidence that leader peptidase belongs to a novel class of serine proteases.     

Activation of the Dunaliella acidophila plasma membrane H(+)-ATPase by trypsin cleavage of a fragment that contains a phosphorylation site.

Trypsin treatment of purified H(+)-ATPase from plasma membranes of the extreme acidophilic alga Dunaliella acidophila enhances ATP hydrolysis and H+ pumping activities. The activation is associated with an alkaline pH shift, an increase in Vmax, and a decrease in Km(ATP). The activation is correlated with cleavage of the 100-kD ATPase polypeptide to a fragment of approximately 85 kD and the appearance of three minor hydrophobic fragments of 7 to 8 kD, which remain associated with the major 85-kD polypeptide. The N-terminal sequence of the small fragments has partial homology to residues 713 to 741 of Arabidopsis thaliana plasma membrane H(+)-ATPases. Incubation of cells with 32P-labeled orthophosphate (32Pi) results in incorporation of 32P into the ATPase 100-kD polypeptide. Trypsin treatment of the 32Pi-labeled ATPase leads to complete elimination of label from the approximately 85-kD polypeptide. Cleavage of the phosphorylated enzyme with endoproteinase Glu-C (V-8) yields a phosphorylated 12-kD fragment. Peptide mapping comparison between the 100-kD and the trypsinized 85-kD polypeptides shows that the 12-kD fragment is derived from the trypsin-cleaved part of the enzyme. The N-terminal sequence of the 12-kD fragment closely resembles a C-terminal stretch of an ATPase from another Dunaliella species. It is suggested that trypsin activation of the D. acidophila plasma membrane H(+)-ATPase results from elimination of an autoinhibitory domain at the C-terminal end of the enzyme that carries a vicinal phosphorylation site.     

Use of phoA fusions to study the topology of the Escherichia coli inner membrane protein leader peptidase.

A topology of the Escherichia coli leader peptidase has been previously proposed on the basis of proteolytic studies. Here, a collection of alkaline phosphatase fusions to leader peptidase is described. Fusions to the periplasmic domain of this protein exhibit high alkaline phosphatase activity, while fusions to the cytoplasmic domain exhibit low activity. Elements within the cytoplasmic domain are necessary to stably anchor alkaline phosphatase in the cytoplasm. The amino-terminal hydrophobic segment of leader peptidase acts as a weak export signal for alkaline phosphatase. However, when this segment is preceded by four lysines, it acts as a highly efficient export signal. The coherence of in vitro studies with alkaline phosphatase fusion analysis of the topology of leader peptidase further indicates the utility of this genetic approach to membrane protein structure and insertion.     

Impaired autoproteolytic cleavage of mCLCA6, a murine integral membrane protein expressed in enterocytes,leads to cleavage at the plasma membrane instead of the endoplasmic reticulum

CLCA proteins (calcium-activated chloride channel regulators) have been linked to diseases involving secretory disorders, including cystic fibrosis (CF) and asthma. They have been shown to modulate endogenous chloride conductance, possibly by acting as metalloproteases. Based on the differential processing of the subunits after posttranslational cleavage, two subgroups of CLCA proteins can be distinguished. In one subgroup, both subunits are secreted, in the other group, the carboxy-terminal subunit possesses a transmembrane segment, resulting in shedding of only the amino-terminal subunit. Recent data on the post-translational cleavage and proteolytic activity of CLCA are limited to secreted CLCA. In this study, we characterized the cleavage of mCLCA6, a murine CLCA possessing a transmembrane segment. As for secreted CLCA, the cleavage in the endoplasmic reticulum was not observed for a protein with the E157Q mutation in the HEXXH motif of mCLCA6, suggesting that this mutant protein and secreted CLCA family members share a similar autoproteolytic cleavage mechanism. In contrast to secreted CLCA proteins with the E157Q mutation, the uncleaved precursor of the mCLCA6E157Q mutant reached the plasma membrane, where it was cleaved and the amino-terminal subunit was shed into the supernatant. Using crude membrane fractions, we showed that cleavage of the mCLCA6E157Q protein is zinc-dependent and sensitive to metalloprotease inhibitors, suggesting secondary cleavage by a metalloprotease. Interestingly, anchorage of mCLCA6E157Q to the plasma membrane is not essential for its secondary cleavage, because the mCLCA6^Δ™E157Q mutant still underwent cleavage. Our data suggest that the processing of CLCA proteins is more complex than previously recognized.     

Chromogranin, an integral membrane protein

Chromogranin is the major soluble protein of the adrenal medulla chromaffin granule and is secreted upon nervous stimulation. Using antisera to pure chromogranin in immunoblotting procedures, we show that chromogranin is the major integral membrane protein as well. Extraction of chromaffin granule membranes with low salt, high salt, chelating agents, or calcium-containing solutions does not remove the chromogranin from the membranes. The membrane form of chromogranin can be purified on a C-18 semi-preparative column using high pressure liquid chromatography. Amino-terminal sequence data indicate that the membrane and soluble forms of chromogranin are identical or very similar.     

Insertion of a multispanning membrane protein occurs sequentially and requires only one signal sequence

To study the insertion of multispanning membrane proteins into the endoplasmic reticulum, we constructed novel proteins on the cDNA level by repeating, up to four times, the internal signal-anchor domain of the asialoglycoprotein receptor H1. Upon in vitro translation in the presence of microsomes, these polypeptides are indeed inserted as polytopic membrane proteins. The first hydrophobic domain functions as a signal and the second as a stop-transfer sequence, while the third initiates a second translocation process, halted again by the fourth. We were able to demonstrate that insertion occurs sequentially, starting with the first apolar segment from the amino terminus. By replacing the original signal-anchor domains by a mutant sequence not recognized by signal recognition particle (SRP), it was shown that only the first hydrophobic domain needs to be a signal sequence and that the second translocation event does not require SRP.