The influence of low power microwave on the properties of DPPC vesicles

The effect of microwave exposure on liposome at non-thermal level are studied. Dipalmitoyl phosphatidylcholine (DPPC) liposomes were exposed to 950 MHz at power densities of 2.5 mW/cm², which is equivalent to specific absorption rate (SAR) of 0.238 W/K. The interaction of microwave with liposomes was investigated by membrane solubilization measurements using a non-ionic detergent, octylglucoside (OG), as well as Fourier transform infrared (FTIR) spectroscopy and flow activation energy measurements. The amount of detergent needed to completely solubilize the liposomal membrane was increased after exposure of liposomes to microwave irradiation, indicating an increased membrane resistance to the detergent and hence a change in the natural membrane permeation properties. In the analysis of FTIR spectra the symmetric and antisymmetric CH₂ (at 2070 cm^?1) band and the CO (at 1640 cm^?1) stretching bands were investigated after liposomal exposure to microwave irradiation. It is clearly shown from the flow activation energy measurements, that low-power microwave induce changes in the liposomes deformability (decreases the liposome fluidity and increases the liposome rigidity). Finally it could be concluded that low-power microwave of 950 MHz induced structural and functional changes in liposomes as a membrane model system.     

Interaction of Doxorubicin and Dipalmitoylphosphatidylcholine Liposomes

The interaction between doxorubicin (DOX), an anthracycline antibiotic frequently used in chemotherapy, and zwitterionic dipalmitoylphosphatidylcholine (DPPC) was investigated using Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and rheological measurements. FTIR results showed that DOX shifted the wavenumber of the PO₂ ⁻ band for pure DPPC to a higher wavenumber. This may have been because of the strong interactions between the NH₃ ⁺ group in DOX and the phosphate (PO₂ ⁻) group in the polar head of DPPC. The main transition temperature of DPPC liposomes was slightly shifted to a lower temperature for DPPC liposome-encapsulated DOX. This suggested that DOX had a significant effect on the acyl chains in the DPPC bilayers, and that its presence decreased the transition cooperativity of lipid acyl chains. There was also the appearance of an additional transition peak at nearly 136°C for the DPPC/DOX sample. These interactions between DOX and DPPC phospholipid would cause a decrease in the DPPC liposomes plastic viscosity and increase membrane fluidity. A better understanding of the interactions between DOX and lipid bilayers could help in the design and development of improved liposomal drug delivery systems.     

Biophysical characterization of gold nanoparticles-loaded liposomes

Gold nanoparticles were prepared and loaded into the bilayer of dipalmitoylphosphatidylcholine (DPPC) liposomes, named as gold-loaded liposomes. Biophysical characterization of gold-loaded liposomes was studied by transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy as well as turbidity and rheological measurements. FTIR measurements showed that gold nanoparticles made significant changes in the frequency of the CH₂ stretching bands, revealing that gold nanoparticles increased the number of gauche conformers and create a conformational change within the acyl chains of phospholipids. The transmission electron micrographs (TEM) revealed that gold nanoparticles were loaded in the liposomal bilayer. The zeta potential of DPPC liposomes had a more negative value after incorporating of Au NPs into liposomal membranes. Turbidity studies revealed that the loading of gold nanoparticles into DPPC liposomes results in shifting the temperature of the main phase transition to a lower value. The membrane fluidity of DPPC bilayer was increased by loading the gold nanoparticles as shown from rheological measurements. Knowledge gained in this study may open the door to pursuing liposomes as a viable strategy for Au NPs delivery in many diagnostic and therapeutic applications.     

Development and Evaluation of Chitosan-Coated Liposomes for Oral DNA Vaccine: The Improvement of Peyer’s Patch Targeting Using a Polyplex-Loaded Liposomes

The aim of this study was to develop chitosan-coated and polyplex-loaded liposomes (PLLs) containing DNA vaccine for Peyer’s patch targeting. Plain liposomes carrying plasmid pRc/CMV-HBs were prepared by the reverse-phase evaporation method. Chitosan coating was carried out by incubation of the liposomal suspensions with chitosan solution. Main lipid components of liposomes were phosphatidylcholine/cholesterol. Sodium deoxycholate and dicetyl phosphate were used as negative charge inducers. The zeta potentials of plain liposomes were strongly affected by the pH of the medium. Coating with chitosan variably increased the surface charges of the liposomes. To increase the zeta potential and stability of the liposome, chitosan was also used as a DNA condensing agent to form a polyplex. The PLLs were coated with chitosan solution. In vivo study of PLLs was carried out in comparison with chitosan-coated liposomes using plasmid encoding green fluorescence protein as a reporter. A single dose of plasmid equal to 100 μg was intragastrically inoculated into BALB/c mice. The expression of green fluorescence protein (GFP) was detected after 24 h using a confocal laser scanning microscope. The signal of GFP was obtained from positively charged chitosan-coated liposomes but found only at the upper part of duodenum. With chitosan-coated PLL540, the signal of GFP was found throughout the intestine. Chitosan-coated PLL demonstrated a higher potential to deliver the DNA to the distal intestine than the chitosan-coated liposomes due to the increase in permanent positive surface charges and the decreased enzymatic degradation.     

Effects of Spray Drying on Physicochemical Properties of Chitosan Acid Salts

The effects of spray-drying process and acidic solvent system on physicochemical properties of chitosan salts were investigated. Chitosan used in spray dryings was obtained by deacetylation of chitin from lobster (Panulirus argus) origin. The chitosan acid salts were prepared in a laboratory-scale spray drier, and organic acetic acid, lactic acid, and citric acid were used as solvents in the process. The physicochemical properties of chitosan salts were investigated by means of solid-state CP-MAS ¹³C nuclear magnetic resonance (NMR), X-ray powder diffraction (XRPD), differential scanning calorimetry, and Fourier transform infrared spectrometry (FTIR) and near-infrared spectroscopy. The morphology of spray-dried chitosan acid salts showed tendency toward higher sphericity when higher temperatures in a spray-drying process were applied. Analysis by XRPD indicated that all chitosan acid salts studied were amorphous solids. Solid-state ¹³C NMR spectra revealed the evidence of the partial conversion of chitosan acetate to chitin and also conversion to acetyl amide form which appears to be dependent on the spray-drying process. The FTIR spectra suggested that the organic acids applied in spray drying may interact with chitosan at the position of amino groups to form chitosan salts. With all three chitosan acid salts, the FTIR bands at 1,597 and 1,615 cm⁻¹ were diminished suggesting that –NH groups are protonated. The FTIR spectra of all chitosan acid salts exhibited ammonium and carboxylate bands at 1,630 and 1,556 cm⁻¹, respectively. In conclusion, spray drying is a potential method of preparing acid salts from chitosan obtained by deacetylation of chitin from lobster (P. argus) origin.     

Synthesis of Monomethoxypolyethyleneglycol—Cholesteryl Ester and Effect of its Incorporation in Liposomes

The objective of the present study was to synthesize monomethoxypolyethyleneglycol-5000 cholesteryl ester [PEG–CH] as a cost-effective substitute for polyethyleneglycol–phosphatidylethanolamine and to evaluate the influence of its incorporation in liposomal bilayers for surface modification. PEG–CH was synthesized and characterized by infrared (IR), proton nuclear magnetic resonance spectroscopy (¹H NMR), and differential scanning calorimetry (DSC) studies. Influence of incorporation of PEG–CH in liposomes was evaluated on various parameters such as zeta potential, DSC, and encapsulation efficiency of a hydrophilic drug pentoxyfylline. Conventional and PEG–CH containing pentoxyfylline liposomes were formulated and their stability was evaluated at 4°C for 3 months. PEG–CH could be successfully synthesized with good yields and the structure was confirmed by IR, DSC, and ¹H NMR. The incorporation of PEG–CH in liposomes resulted in reduction of the zeta potential and broadening of the DSC endotherm. Furthermore, incorporation of PEG–CH in liposomes decreased the encapsulation efficiency of pentoxifylline in liposomes when compared to conventional liposomes. Conventional and PEG–CH containing pentoxyfylline liposomes did not show any signs of pentoxyfylline degradation when stored at 4°C for 3 months.     

Reaction of winter oilseed rape callus to different concentrations of elicitors: pectinase or chitosan

The aim of the presented methodical experiments was 1) the evaluation if callus of winter oilseed rape (Brassica napus var. oleifera L.) initiates a defence reaction to fungal elicitors: pectinase (polygalacturonase) or chitosan, and 2) the choice of the elicitor doses, which evoke the strongest tissue reaction. The results obtained will be used in the next experiments relating the studies of pathogenesis mechanisms proceeding in rape plants infected by necrotrophic fungi. The defence response was estimated on the basis of changes in electrolyte leakage from cells, metabolic efficiency, phenolic content and catalase activity. In the experiment pectinase was used at concentration of 3, 8, 16, 133 and 166 μl per 1 cm³ of culture medium while chitosan at: 25, 50, 75 and 100 μg·cm⁻³. Both elicitors increased cell membrane permeability: pectinase at the doses equal or greater to 16 μl·cm⁻³ while chitosan of 25 μg·cm⁻³. The greatest metabolic inefficiency was observed in calli elicited with 16 μl·cm⁻³ pectinase and with chitosan of 100 μg·cm⁻³. The decrease in phenolic content was noted under influence of most doses of both elicitors. The highest catalase activity was evoked by pectinase of 8 μl·cm⁻³ and chitosan of 75 and 100 μg·cm⁻³. The results indicated that 8–16 μl·cm⁻³ of pectinase and 100 μg·cm⁻³ of chitosan caused the strongest defence reaction of oilseed rape tissue.     

Chitosan enhances leaf membrane stability and antioxidant enzyme activities in apple seedlings under drought stress

Chitosan is a cationic marine polysaccharide with unique bioactive properties that make it an effective scavenger of reactive oxygen species. Chitosan application has been suggested as an aid for reducing oxidative injury caused by drought stress in crop plants. In order to confirm the antioxidant effects of exogenous chitosan, cell membrane stability and antioxidant enzyme activities were analyzed in leaves of apple seedlings placed under a period of drought stress. Pretreatment of apple seedling leaves with chitosan solution (20, 50, 100, 150 and 200 mg l⁻¹) prior to drought stress significantly decreased electrolyte leakage and the production of malondialdehyde in the leaves, while increasing antioxidant enzyme activities (superoxide dismutase, catalase), following imposition of drought stress conditions. An optimum response was obtained at a chitosan concentration of 100 mg l⁻¹. When apple seedlings were pretreated with 100 mg l⁻¹ of chitosan, cell membrane stability and antioxidant enzyme activities were enhanced for 21 days of drought treatment. Following restoration of moisture and a repeated drought stress, similar results were obtained on day 35. It is proposed that chitosan may act as an exogenous antioxidant that enhances resistance to oxidative stress during drought.     

Immobilizing Pt nanoparticles and chitosan hybrid film on polyaniline naofibers membrane for an amperometric hydrogen peroxide biosensor

A convenient and effective way for fabricating amperometric hydrogen peroxide (H₂O₂) biosensor was designed in this paper. First, the polyaniline (PANI) nanofibers membrane with good conductance and high surface area was electropolymerized on a gold electrode surface. Then, Pt nanoparticle (PtNP) was electrochemically deposited on the PANI nanofibers membrane. Finally, the hybrid film of gold nanoparticle, chitosan, and horseradish peroxidase (HRP) was cast onto the modified electrode to form a stable biofunctional film, which was also employed as a protective layer to PtNP. The proposed biosensor exhibited a rapid response to H₂O₂ with the linear range from 7.0 × 10⁻⁶ to 1.4 × 10⁻² M and a detection limit of 2.8 × 10⁻⁶ M (S/N = 3). The sensitivity of 558 μA mM⁻¹ cm⁻² was obtained. The Michaelis–Menten constant, K_\textM^\textapp K_{\text{M}}^{\text{app}} value was 1.90 mM suggesting a high affinity. Moreover, it displayed a good reproducibility and long-term stability.     

Effect of Fluidizing Agents on Paclitaxel Penetration in Cervical Cancerous Monolayer Membranes

The aim of this study was to compare modulation of paclitaxel penetration in cancerous and normal cervical monolayers by four fluidizing agents: PCPG (9:1 DPPC:PG), PCPE (9:1 DPPC:DOPE), ALEC (7:3 DPPC:PG) and Exosurf (13.5:1.5:1.0 DPPC:hexadecanol:tyloxapol). Presence of the fluidizing agents improved drug penetration significantly. PCPG and PCPE were promising penetration enhancers. PCPG 0.1% caused 3.8– and 1.7-fold higher maximum increments in surface pressure due to drug penetration, (Δπ)_max, than the control in cancerous and normal monolayers, respectively, at 20 mN/m. In cancerous monolayer at 20 mN/m, presence of 0.1%, 0.5%, 1%, 5% and 10% PCPE produced 3.4-, 5.7-, 7.4-, 9.6- and 9.8-fold higher drug penetration compared to the control monolayer without PCPE, respectively. In cancerous monolayer at 20 mN/m, PCPG and PCPE liposomes having 1 mg lipid gave 2.1 and 3.6 times higher (Δπ)_max compared to the control, respectively. Further, the liposomal drug penetration was found to be directly proportional to the liposomal lipid content. The effect of the fluidizing agents was confirmed by increased calcein release from model cervical cancer liposomes. These results may have implications in using the above biocompatible lipids and surfactants as penetration enhancers along with anticancer drugs or as carriers for liposomal formulations of anticancer drugs for improved membrane penetration.     

Drug-Cyclodextrin-Vesicles Dual Carrier Approach for Skin Targeting of Anti-acne Agent

In the present study attempt was made for preparation of isotretinoin-hydroxypropyl β cyclodextrin (HP-β-CD) inclusion complex and encapsulate this complex in elastic liposomes to study the effect of dual carrier approach on skin targeting of isotretinoin. The isotretinoin HP-β-CD complex was prepared by freeze-drying method and characterized by IR spectroscopy. The drug and drug-CD complex loaded elastic liposomal formulation were prepared and characterized in vitro, ex-vivo and in vivo for shape, size, entrapment efficiency, no. of vesicles per cubic mm, in vitro skin permeation and deposition study, photodegradation and skin toxicity assay. The transdermal flux for different vesicular formulations was observed between 10.5 ± 0.5 to 13.9 ± 1.6 μg/cm²/h. This is about 15-21 folds higher than that obtained from drug solution (0.7 ± 0.1 μg/cm²/h) and 4-5 folds higher than obtained with drug-CD complex solution (2.7 ± 0.1 μg/cm²/h). The amount of drug deposit was found to increase significantly (p < 0.05) by cyclodextrin complexation (30.1 ± 0.1 μg). The encapsulation of this complex in elastic liposomal formulation further increases its skin deposition (262.2 ± 21 μg). The results of skin irritation study using Draize test also showed the significant reduction in skin irritation potential of isotretinoin elastic liposomal formulation in comparison to free drug. The results of the present study demonstrated that isotretinoin elastic liposomal formulation possesses great potential for skin targeting, prolonging drug release, reduction of photodegradation, reducing skin irritation and improving topical delivery of isotretinoin.     

Temperature-sensitive liposomes for co-delivery of tamoxifen and imatinib for synergistic breast cancer treatment

Co-delivery of chemotherapeutic agents using nanocarriers is a promising strategy for enhancing therapeutic efficacy of anticancer agents. The aim of this work was to develop tamoxifen and imatinib dual drug loaded temperature-sensitive liposomes to treat breast cancer. Liposomes were prepared using 1, 2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), monopalmitoyl-2-hydroxy-sn-glycero-3-phosphocholine (MPPC), and different surface active agents. The liposomes were characterized for the average particle size, zeta potential, transition temperature, and drug release below and above liposomal transition temperature. The temperature-sensitive liposomes co-encapsulated with tamoxifen and imatinib were investigated for their synergistic activity against MCF-7 and MDA-MB-231 breast cancer cells. The liposomal nanoparticles showed a transition temperature of 39.4?°C and >70% encapsulation efficiency for tamoxifen and imatinib. The temperature-responsive liposomes showed more than 80% drug released within 30?min above transition temperature. Dual drug loaded liposomes showed synergistic growth inhibition against MCF-7 and MDA-MB-231 breast cancer cells. Co-delivery of tamoxifen and imatinib using temperature-sensitive liposomes can be developed as a potential targeting strategy against breast cancer.     

Formation of Two Different Types of Ion Channels by Amphotericin B in Human Erythrocyte Membranes

The polyene antibiotic amphotericin B (AmB) is known to form aqueous pores in lipid membranes and biological membranes. Here, membrane potential and ion permeability measurements were used to demonstrate that AmB can form two types of selective ion channels in human erythrocytes, differing in their interaction with cholesterol. We show that AmB induced a cation efflux (negative membrane polarization) across cholesterol-containing liposomes and erythrocytes at low concentrations (≤1.0 × 10⁻⁶ M), but a sharp reversal of such polarization was observed at concentrations greater than 1.0 × 10⁻⁶ M AmB, an indication that aqueous pores are formed. Cation-selective AmB channels are also formed across sterol-free liposomes, but aqueous pores are only formed at AmB concentrations 10 times greater. The effect of temperature on the AmB-mediated K⁺ efflux across erythrocytes revealed that the energies of activation for channel formation are negative and positive at AmB concentrations that lead predominantly to the formation of cation-selective channels and aqueous pores, respectively. These findings support the conclusion that the two types of AmB channels formed in human erythrocytes differ in their interactions with cholesterol and other membrane components. In effect, a membrane lipid reorganization, as induced by incubation of erythrocytes with tetrathionate, a cross-linking agent of the lipid raft–associated protein spectrin, led to differential changes in the activation parameters for the formation of both types of channels, reflecting the different lipid environments in which such structures are formed.     

The development of composite dispersal functions for estimating absolute pollen productivity in the Swiss Alps

Considering the complexity of real-world pollen dispersal, a single set of parameters may be inadequate to model pollen dispersal, especially as dispersal occurs on both local and regional scales. Here we combine more than one dispersal function into a composite dispersal function (CDF). The function incorporates multiple parameters and different modes of pollen transportation, and thus has the potential to better simulate the relationship between deposited pollen and the surrounding vegetation than would otherwise be possible. CDFs based on different dispersal functions and combinations of dispersal functions were evaluated using a pollen-trap dataset from the Swiss Alps. Absolute pollen productivity (APP) was estimated at 7,700 ± 2,000 grains cm⁻² year⁻¹ for Larix decidua, 13,500 ± 1,900 grains cm⁻² year⁻¹ for Picea abies and 95,600 ± 17,700 grains cm⁻² year⁻¹ for Pinus cembra (with 95% confidence level). The results are consistent with previous APP estimates made from the same dataset using different methods.     

In Vitro Percutaneous Permeation and Skin Accumulation of Finasteride Using Vesicular Ethosomal Carriers

In order to develop a novel transdermal drug delivery system that facilitates the skin permeation of finasteride encapsulated in novel lipid-based vesicular carriers (ethosomes)finasteride ethosomes were constructed and the morphological characteristics were studied by transmission electron microscopy. The particle size, zeta potential and the entrapment capacity of ethosome were also determined. In contrast to liposomes ethosomes were of more condensed vesicular structure and they were found to be oppositely charged. Ethosomes were found to be more efficient delivery carriers with high encapsulation capacities. In vitro percutaneous permeation experiments demonstrated that the permeation of finasteride through human cadaver skin was significantly increased when ethosomes were used. The finasteride transdermal fluxes from ethosomes containing formulation (1.34 ± 0.11 μg/cm²/h) were 7.4, 3.2 and 2.6 times higher than that of finasteride from aqueous solution, conventional liposomes and hydroethanolic solution respectively (P < 0.01).Furthermore, ethosomes produced a significant (P < 0.01) finasteride accumulation in the skin, especially in deeper layers, for instance in dermis it reached to 18.2 ± 1.8 μg/cm². In contrast, the accumulation of finasteride in the dermis was only 2.8 ± 1.3 μg/cm² with liposome formulation. The study demonstrated that ethosomes are promising vesicular carriers for enhancing percutaneous absorption of finasteride.     

FTIR-spectral analysis of two photosynthetic H2-producing strains and their extracellular polymeric substances

The Fourier transform infrared (FTIR) spectra of the cells of two photosynthetic H₂-producing strains, Rhodoblastus acidophilus and Rhodobacter capsulatus, as well as their extracellular polymeric substances (EPS), were evaluated. The FTIR spectra of R. capsulatus and its EPS during its cultivation were also recorded. The main peaks in the spectra, including 1,080 cm⁻¹ (carbohydrates), 1,250 cm⁻¹ (nucleic acids), 2,830–2,930 cm⁻¹ (lipids), 1,660–1,535 cm⁻¹ (Amide I and II of proteins), were observed. The relative heights of these peaks in the spectra of the two strains were different, showing the difference in contents of various components in the cells or EPS. The ratios among the main components in the EPS obtained from the FTIR spectra were in good agreement with those from a conventional quantitative chemical analysis. As an easy, rapid, and direct technique, the FTIR spectroscopy could be used to characterize the components and their relative contents of EPS of photosynthetic bacteria.An erratum to this article can be found at     

Pollen dispersal and deposition characteristics of Abies alba, Fagus sylvatica and Pinus sylvestris, Roztocze region (SE Poland)

Pinus sylvestris L., Abies alba Mill. and Fagus sylvatica L.—the significant forest forming tree species in Europe are important for palaeoecological interpretations based on the results of pollen analysis of fossil deposits. The potential pollen loading for Pinus sylvestris, Abies alba and Fagus sylvatica was modelled using simulated and actual vegetation maps, measured fall-speed values and pollen productivity estimates from the literature. The influx of fir pollen drops sharply with distance from the pollen source due to the high fall speed and moderate pollen productivity. The vast majority of Abies alba pollen is deposited within less than 50 m of the sampling site and a major proportion within 100 m. For beech the corresponding numbers would be 300 and 1,800 m, and for pine 1,000 and 4,500 m. The observed mean pollen accumulation rate (PAR) values for Pinus and Fagus were ca. 5,800 and 1,100 grains cm⁻² year⁻¹, respectively. In the case of Abies, the mean annual PAR for the whole region is ca. 700 grains cm⁻² year⁻¹. In SE Poland the regional signal is represented by PARs of Abies alba <200 grains cm⁻² year⁻¹ and of Fagus sylvatica <500 grains cm⁻² year⁻¹. The local presence/absence threshold values for Abies alba, Fagus sylvatica and Pinus sylvestris are >1,000 grains cm⁻² year⁻¹, >2,000 grains cm⁻² year⁻¹ and >3,500 grains cm⁻² year⁻¹ respectively.     

A Composite Polyelectrolytic Matrix for Controlled Oral Drug Delivery

The purpose of this study was to formulate drug-loaded polyelectrolyte matrices constituting blends of pectin, chitosan (CHT) and hydrolyzed polyacrylamide (HPAAm) for controlling the premature solvation of the polymers and modulating drug release. The model drug employed was the highly water-soluble antihistamine, diphenhydramine HCl (DPH). Polyelectrolyte complex formation was validated by infrared spectroscopy. Matrices were characterized by textural profiling, porositometry and SEM. Drug release studies were performed under simulated gastrointestinal conditions using USP apparatus 3. FTIR spectra revealed distinctive peaks indicating the presence of –COO⁻ symmetrical stretching (1,425–1,390 cm⁻¹) and -NH₃⁺ deformation (1,535 cm⁻¹) with evidence of electrostatic interaction between the cationic CHT and anionic HPAAm corroborated by molecular mechanics simulations of the complexes. Pectin–HPAAm matrices showed electrostatic attraction due to residual –NH₂ and –COO⁻ groups of HPAAm and pectin, respectively. Textural profiling demonstrated that CHT-HPAAm matrices were most resilient at 6.1% and pectin–CHT–HPAAm matrices were the least (3.9%). Matrix hardness and deformation energy followed similar behavior. Pectin–CHT–HPAAm and CHT–HPAAm matrices produced type IV isotherms with H3 hysteresis and mesopores (22.46 nm) while pectin–HPAAm matrices were atypical with hysteresis at a low P/P₀ and pore sizes of 5.15 nm and a large surface area. At t _2 h, no DPH was released from CHT–HPAAm matrices, whereas 28.2% and 82.2% was released from pectin–HPAAm and pectin–CHT–HPAAm matrices, respectively. At t _4 h, complete DPH release was achieved from pectin–CHT–HPAAm matrices in contrast to only 35% from CHT–HPAAm matrices. This revealed the release-modulating capability of each matrix signifying their applicability in controlled oral drug delivery applications.     

Characterization of the interaction between liposomal formulations and Pseudomonas aeruginosa

The interactions between three liposomal formulations and Pseudomonas aeruginosa cells were evaluated by a lipid mixing assay and electron paramagnetic resonance (EPR) spectroscopy. The effect of the bacteria on the liposomal phase characteristics, the release of the liposomes’ content, and the uptake rate of gentamicin by bacteria were monitored as a function of time, using EPR spectroscopy. The [16-DSA uptake]_Total from DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) liposomes reached 93?±?12% over a 3-hour assay period, of which 9% crossed the bacterial inner membrane. A small amount of 16-DSA uptake from DPPC/Chol (cholesterol) vesicles was found throughout the 3-hour period of time. Although DPPC/DMPG (dimyristoylphosphatidylglycerol) vesicles showed a smaller value of [16-DSA uptake]_Total with respect to that of DPPC vesicles, they appeared to be effective in disrupting the bacterial membrane, resulting in a greater accumulation of 16-DSA inside the inner membrane. Exposure to bacteria caused the DPPC/Chol, DPPC, and DPPC/DMPG formulations to release 4.6?±?1.5, 17.6?±?1.2, and 34?±?3.7% of their content, respectively. Time-dependent fluid regions were developed within the vesicles when mixed with bacteria, and their growth over time depended on liposomal formulations. Incubation of gentamicin with bacteria for 3 hours resulted in 87?±?3% of the drug crossing the bacterial inner membrane. In conclusion, interaction between the liposome drug carriers and the bacterial cells result in vesicle fusion, disruption of the bacterial membrane, release of the liposomal content in the close vicinity of the bacteria cells, and the subsequent intracellular uptake of the released liposomal content.     

Fourier transform infrared microspectroscopy as a diagnostic tool for distinguishing between normal and malignant human gastric tissue

Fourier transform infrared (FTIR) microspectroscopy can be considered to be a fast and non-invasive tool for distinguishing between normal and cancerous cells and tissues without the need for laborious and invasive sampling procedures. Gastric samples from four patients (age, 65±2 years) were analysed. Samples were obtained from the organs removed during gastrectomy and then classified as normal or cancerous. Classification was based on histopathological examinations at our institution. Formalin-fixed sections of gastric tissue were analysed by FTIR- microspectroscopy. To characterize differences between sections of normal and cancerous tissue, specific regions of the spectra were analysed to study variations in the levels of metabolites. To distinguish between two conditions (normal and cancerous), changes in the relative intensity of bands in the range 600–4000 cm⁻¹ were analysed. A FTIR spectral map of the bands in the region 2800–3100 cm^–1 and 900–1800 cm^–1 were created to analyse pathological changes in tissues. The limited data available showed that normal gastric tissue had stronger absorption than cancerous tissue over a wide region in the four patients. There was a significant decrease in total biomolecular components for cancerous tissue compared with normal tissue.