Genome Differences That Distinguish Bacillus anthracis from Bacillus cereus and Bacillus thuringiensis

The three species of the group 1 bacilli, Bacillus anthracis, B. cereus, and B. thuringiensis, are genetically very closely related. All inhabit soil habitats but exhibit different phenotypes. B. anthracis is the causative agent of anthrax and is phylogenetically monomorphic, while B. cereus and B. thuringiensis are genetically more diverse. An amplified fragment length polymorphism analysis described here demonstrates genetic diversity among a collection of non-anthrax-causing Bacillus species, some of which show significant similarity to B. anthracis. Suppression subtractive hybridization was then used to characterize the genomic differences that distinguish three of the non-anthrax-causing bacilli from B. anthracis Ames. Ninety-three DNA sequences that were present in B. anthracis but absent from the non-anthrax-causing Bacillus genomes were isolated. Furthermore, 28 of these sequences were not found in a collection of 10 non-anthrax-causing Bacillus species but were present in all members of a representative collection of B. anthracis strains. These sequences map to distinct loci on the B. anthracis genome and can be assayed simultaneously in multiplex PCR assays for rapid and highly specific DNA-based detection of B. anthracis.     

Utilization of the rpoB gene as a specific chromosomal marker for real-time PCR detection of Bacillus anthracis

The potential use of Bacillus anthracis as a weapon of mass destruction poses a threat to humans, domesticated animals, and wildlife and necessitates the need for a rapid and highly specific detection assay. We have developed a real-time PCR-based assay for the specific detection of B. anthracis by taking advantage of the unique nucleotide sequence of the B. anthracis rpoB gene. Variable region 1 of the rpoB gene was sequenced from 36 Bacillus strains, including 16 B. anthracis strains and 20 other related bacilli, and four nucleotides specific for B. anthracis were identified. PCR primers were selected so that two B. anthracis-specific nucleotides were at their 3' ends, whereas the remaining bases were specific to the probe region. This format permitted the PCR reactions to be performed on a LightCycler via fluorescence resonance energy transfer (FRET). The assay was found to be specific for 144 B. anthracis strains from different geographical locations and did not cross-react with other related bacilli (175 strains), with the exception of one strain. The PCR assay can be performed on isolated DNA as well as crude vegetative cell lysates in less than 1 h. Therefore, the rpoB-FRET assay could be used as a new chromosomal marker for rapid detection of B. anthracis.     

Development and validation of a real-time quantitative PCR assay for rapid identification of Bacillus anthracis in environmental samples

A real-time polymerase chain reaction (PCR) assay was developed for rapid identification of Bacillus anthracis in environmental samples. These samples often harbor Bacillus cereus bacteria closely related to B. anthracis, which may hinder its specific identification by resulting in false positive signals. The assay consists of two duplex real-time PCR: the first PCR allows amplification of a sequence specific of the B. cereus group (B. anthracis, B. cereus, Bacillus thuringiensis, Bacillus weihenstephanensis, Bacillus pseudomycoides, and Bacillus mycoides) within the phosphoenolpyruvate/sugar phosphotransferase system I gene and a B. anthracis specific single nucleotide polymorphism within the adenylosuccinate synthetase gene. The second real-time PCR assay targets the lethal factor gene from virulence plasmid pXO1 and the capsule synthesis gene from virulence plasmid pXO2. Specificity of the assay is enhanced by the use of minor groove binding probes and/or locked nucleic acids probes. The assay was validated on 304 bacterial strains including 37 B. anthracis, 67 B. cereus group, 54 strains of non-cereus group Bacillus, and 146 Gram-positive and Gram-negative bacteria strains. The assay was performed on various environmental samples spiked with B. anthracis or B. cereus spores. The assay allowed an accurate identification of B. anthracis in environmental samples. This study provides a rapid and reliable method for improving rapid identification of B. anthracis in field operational conditions.     

A Novel Multiplex PCR Discriminates Bacillus anthracis and Its Genetically Related Strains from Other Bacillus cereus Group Species

Anthrax is an important zoonotic disease worldwide that is caused by Bacillus anthracis, a spore-forming pathogenic bacterium. A rapid and sensitive method to detect B. anthracis is important for anthrax risk management and control in animal cases to address public health issues. However, it has recently become difficult to identify B. anthracis by using previously reported molecular-based methods because of the emergence of B. cereus, which causes severe extra-intestinal infection, as well as the human pathogenic B. thuringiensis, both of which are genetically related to B. anthracis. The close genetic relation of chromosomal backgrounds has led to complexity of molecular-based diagnosis. In this study, we established a B. anthracis multiplex PCR that can screen for the presence of B. anthracis virulent plasmids and differentiate B. anthracis and its genetically related strains from other B. cereus group species. Six sets of primers targeting a chromosome of B. anthracis and B. anthracis-like strains, two virulent plasmids, pXO1 and pXO2, a bacterial gene, 16S rRNA gene, and a mammalian gene, actin-beta gene, were designed. The multiplex PCR detected approximately 3.0 CFU of B. anthracis DNA per PCR reaction and was sensitive to B. anthracis. The internal control primers also detected all bacterial and mammalian DNAs examined, indicating the practical applicability of this assay as it enables monitoring of appropriate amplification. The assay was also applied for detection of clinical strains genetically related to B. anthracis, which were B. cereus strains isolated from outbreaks of hospital infections in Japan, and field strains isolated in Zambia, and the assay differentiated B. anthracis and its genetically related strains from other B. cereus group strains. Taken together, the results indicate that the newly developed multiplex PCR is a sensitive and practical method for detecting B. anthracis.     

Genetic distribution of 295 Bacillus cereus group members based on adk-screening in combination with MLST (Multilocus Sequence Typing) used for validating a primer targeting a chromosomal locus in B. anthracis

The genetic distribution of 295 Bacillus cereus group members has been investigated by using a modified Multilocus Sequence Typing method (MLST). By comparing the nucleic acid sequence of the adk gene fragment, isolates of B. cereus group members most related to B. anthracis may be easily identified. The genetic distribution, with focus on the B. anthracis close neighbours, was used to evaluate a new primer set for specific identification of B. anthracis. This primer set, BA5510-1/2, targeted the putative B. anthracis specific gene BA5510. Real-time PCR using BA5510-1/2 amplified the target fragment from all B. anthracis strains tested and only two (of 289) non-B. anthracis strains analysed. This is one of the most thoroughly validated chromosomal B. anthracis markers for real-time PCR identification, in which the screened collection contained several very closely related B. anthracis strains.     

Use of Long-Range Repetitive Element Polymorphism-PCR To Differentiate Bacillus anthracis Strains

The genome of Bacillus anthracis is extremely monomorphic, and thus individual strains have often proven to be recalcitrant to differentiation at the molecular level. Long-range repetitive element polymorphism-PCR (LR REP-PCR) was used to differentiate various B. anthracis strains. A single PCR primer derived from a repetitive DNA element was able to amplify variable segments of a bacterial genome as large as 10 kb. We were able to characterize five genetically distinct groups by examining 105 B. anthracis strains of diverse geographical origins. All B. anthracis strains produced fingerprints comprising seven to eight bands, referred to as “skeleton” bands, while one to three “diagnostic” bands differentiated between B. anthracis strains. LR REP-PCR fingerprints of B. anthracis strains showed very little in common with those of other closely related species such as B. cereus, B. thuringiensis, and B. mycoides, suggesting relative heterogeneity among the non-B. anthracis strains. Fingerprints from transitional non-B. anthracis strains, which possessed the B. anthracis chromosomal marker Ba813, scarcely resembled those observed for any of the five distinct B. anthracis groups that we have identified. The LR REP-PCR method described in this report provides a simple means of differentiating B. anthracis strains.     

Immuno capture PCR for rapid and sensitive identification of pathogenic Bacillus anthracis

Immuno capture PCR (IPCR) is a technique capable of detecting the pathogens with high specificity and sensitivity. Rapid and accurate detection of Bacillus anthracis was achieved using anti-EA1 antibodies to capture the cells and two primer sets targeting the virulence factors of the pathogen i.e., protective antigen (pag) and capsule (cap) in an IPCR format. Monoclonal antibodies specific to B. anthracis were generated against extractable antigen 1 protein and used as capture antibody onto 96 well polystyrene plates. Following the binding of the pathogen, the DNA extraction was carried out in the well itself and further processed for PCR assay. We compared IPCR described here with conventional duplex PCR using the same primers and sandwich ELISA using the monoclonal antibodies developed in the present study. IPCR was capable of detecting as few as 10 and 100 cfu ml^?1 of bacterial cells and spores, respectively. IPCR was found to be 2–3 logs more sensitive than conventional duplex PCR and the sandwich ELISA. The effect of other bacteria and any organic materials on IPCR was also analyzed and found that this method was robust with little change in the sensitivity in the presence of interfering agents. Moreover, we could demonstrate a simple process of microwave treatment for spore disruption which otherwise are resistant to chemical treatments. Also, the IPCR could clearly distinguish the pathogenic and nonpathogenic strains of B. anthracis in the same assay. This can help in saving resources on unnecessary decontamination procedures during false alarms.     

Reverse Line Blot Macroarray for Simultaneous Detection and Characterization of Four Biological Warfare Agents

The need for a rapid detection and characterization of biowarfare (BW) agents cannot be over emphasized. With diverse array of potential BW pathogen available presently, rapid identification of the pathogen is crucial, so that specific therapy and control measures can be initiated. We have developed a multiplex polymerase chain reaction based reverse line blot macroarray to simultaneously detect four pathogens of BW importance viz. Bacillus anthracis, Yersinia pestis, Brucella melitensis and Burkholderia pseudomallei. The multiplex PCR utilizes 14 pairs of primers targeting 18 specific markers. These markers include genes which are genus specific, species-specific chromosomal sequences and virulence markers of plasmid origin. The assay was evaluated on various human, environment and animal isolates. The assay w successful in simultaneous detection and characterization of isolates of the four pathogens on as a single platform with sensitivity ranging from 0.3 pg to 0.3 ng of genomic DNA. The assay was able to detect 5 × 10² cfu/ml for B. anthracis, 8 × 10² cfu/ml for Yersinia sp., 1.4 × 10² cfu/ml for B. melitensis and 4 × 10² cfu/ml for B. pseudomallei.     

Use of high-resolution melting and melting temperature-shift assays for specific detection and identification of Bacillus anthracis based on single nucleotide discrimination

Single nucleotide polymorphisms (SNPs) are important diagnostic markers for the detection and differentiation of Bacillus anthracis. High-Resolution Melting (HRM) and Melting Temperature (Tm)-shift methods are two approaches that enable SNP detection without the need for expensive labeled probes. We evaluated the potential diagnostic capability of those methods to discriminate B. anthracis from the other members of the B. cereus group. Two assays targeting B. anthracis-specific SNPs in the plcR and gyrA genes were designed for each method and used to genotype a panel of 155 Bacilli strains. All B. anthracis isolates (n = 65) were correctly and unambiguously identified. Assays also proved to be appropriate for the direct genotyping of biological samples. They could reliably detect B. anthracis in contaminated organs containing as little as 10³ CFU/ml, corresponding to a few genome equivalents per reaction. The HRM and Tm-shift applications described here represent valuable tools for specific identification of B. anthracis at reduced cost.     

Identification of a Bacillus anthracis specific indel in the yeaC gene and development of a rapid pyrosequencing assay for distinguishing B. anthracis from the B. cereus group

Bacillus anthracis, the causative agent of anthrax, is a potential source of bioterrorism. The existing assays for its identification lack specificity due to the close genetic relationship it exhibits to other members of the B. cereus group. Our comparative analyses of protein sequences from Bacillus species have identified a 24 amino acid deletion in a conserved region of the YeaC protein that is uniquely present in B. anthracis. PCR primers based on conserved regions flanking this indel in the Bacillus cereus group of species (viz. Bacillus cereus, B. anthracis, B. thuringiensis, B. mycoides, B. weihenstephnensis and B. pseudomycoides) specifically amplified a 282 bp fragment from all six reference B. anthracis strains, whereas a 354 bp fragment was amplified from 15 other B. cereus group of species/strains. These fragments, due to large size difference, are readily distinguished by means of agarose gel electrophoresis. In contrast to the B. cereus group, no PCR amplification was observed with any of the non-B. cereus group of species/strains. This indel was also used for developing a rapid pyrosequencing assay for the identification of B. anthracis. Its performance was evaluated by examining the presence or absence of this indel in a panel of 81 B. cereus-like isolates from various sources that included 39 B. anthracis strains. Based upon the sequence data from the pyrograms, the yeaC indel was found to be a distinctive characteristic of various B. anthracis strains tested and not found in any other species/strains from these samples. Therefore, this B. anthracis specific indel provides a robust and highly-specific chromosomal marker for the identification of this high-risk pathogen from other members of the B. cereus group independent of a strain's virulence. The pyrosequencing platform also allows for the rapid and simultaneous screening of multiple samples for the presence of this B. anthracis-specific marker.     

Identification of a Bacillus anthracis specific indel in the yeaC gene and development of a rapid pyrosequencing assay for distinguishing B. anthracis from the B. cereus group

Bacillus anthracis, the causative agent of anthrax, is a potential source of bioterrorism. The existing assays for its identification lack specificity due to the close genetic relationship it exhibits to other members of the B. cereus group. Our comparative analyses of protein sequences from Bacillus species have identified a 24 amino acid deletion in a conserved region of the YeaC protein that is uniquely present in B. anthracis. PCR primers based on conserved regions flanking this indel in the Bacillus cereus group of species (viz. Bacillus cereus, B. anthracis, B. thuringiensis, B. mycoides, B. weihenstephnensis and B. pseudomycoides) specifically amplified a 282 bp fragment from all six reference B. anthracis strains, whereas a 354 bp fragment was amplified from 15 other B. cereus group of species/strains. These fragments, due to large size difference, are readily distinguished by means of agarose gel electrophoresis. In contrast to the B. cereus group, no PCR amplification was observed with any of the non-B. cereus group of species/strains. This indel was also used for developing a rapid pyrosequencing assay for the identification of B. anthracis. Its performance was evaluated by examining the presence or absence of this indel in a panel of 81 B. cereus-like isolates from various sources that included 39 B. anthracis strains. Based upon the sequence data from the pyrograms, the yeaC indel was found to be a distinctive characteristic of various B. anthracis strains tested and not found in any other species/strains from these samples. Therefore, this B. anthracis specific indel provides a robust and highly-specific chromosomal marker for the identification of this high-risk pathogen from other members of the B. cereus group independent of a strain's virulence. The pyrosequencing platform also allows for the rapid and simultaneous screening of multiple samples for the presence of this B. anthracis-specific marker.     

Locked Nucleic Acid Probe-Based Real-Time PCR Assay for the Rapid Detection of Rifampin-Resistant Mycobacterium tuberculosis

Drug-resistant Mycobacterium tuberculosis can be rapidly diagnosed through nucleic acid amplification techniques by analyzing the variations in the associated gene sequences. In the present study, a locked nucleic acid (LNA) probe-based real-time PCR assay was developed to identify the mutations in the rpoB gene associated with rifampin (RFP) resistance in M. tuberculosis. Six LNA probes with the discrimination capability of one-base mismatch were designed to monitor the 23 most frequent rpoB mutations. The target mutations were identified using the probes in a “probe dropout” manner (quantification cycle = 0); thus, the proposed technique exhibited superiority in mutation detection. The LNA probe-based real-time PCR assay was developed in a two-tube format with three LNA probes and one internal amplification control probe in each tube. The assay showed excellent specificity to M. tuberculosis with or without RFP resistance by evaluating 12 strains of common non-tuberculosis mycobacteria. The limit of detection of M. tuberculosis was 10 genomic equivalents (GE)/reaction by further introducing a nested PCR method. In a blind validation of 154 clinical mycobacterium isolates, 142/142 (100%) were correctly detected through the assay. Of these isolates, 88/88 (100%) were determined as RFP susceptible and 52/54 (96.3%) were characterized as RFP resistant. Two unrecognized RFP-resistant strains were sequenced and were found to contain mutations outside the range of the 23 mutation targets. In conclusion, this study established a sensitive, accurate, and low-cost LNA probe-based assay suitable for a four-multiplexing real-time PCR instrument. The proposed method can be used to diagnose RFP-resistant tuberculosis in clinical laboratories.     

Comparison of Minisatellite Polymorphisms in the Bacillus cereus Complex: a Simple Assay for Large-Scale Screening and Identification of Strains Most Closely Related to Bacillus anthracis

Polymorphism of five tandem repeats that are monomorphic in Bacillus anthracis was investigated in 230 isolates of the B. cereus group and in 5 sequenced B. cereus genomes in search for markers allowing identification of B. cereus and B. thuringiensis strains most closely related to B. anthracis. Using this multiple-locus variable number of tandem repeat analysis (MLVA), a cluster of 30 strains was selected for further characterization. Eventually, six of these were characterized by multilocus sequence type analysis. One of the strains is only six point mutations (of almost 3,000 bp) away from B. anthracis and was also proposed to be closest to B. anthracis by MLVA analysis. However, this strain remains separated from B. anthracis by a number of significant genetic events observed in B. anthracis, including the loss of the hemolysin activity, the presence of four prophages, and the presence of the two virulence plasmids, pXO1 and pXO2. One particular minisatellite marker provides an efficient assay to identify the subset of B. cereus and B. thuringiensis strains closely related to B. anthracis. Based on these results, a very simple assay is proposed that allows the screening of hundreds of strains from the B. cereus complex, with modest equipment and at a low cost, to eventually fill the gap with B. anthracis and better understand the origin and making of this dangerous pathogen.     

Multiplex PCR assay for the detection of enterotoxic <Emphasis Type="Italic">Bacillus cereus</Emphasis> group strains and its application in food matrices

Bacillus cereus, Bacillus thuringiensis and Bacillus anthracis are the major concerns for the food safety in terms of frequency and/or seriousness of the disease. Being members of the same group and sharing DNA homology to a larger extent, they do create problems when their specific detection/identification is attempted from different food and environmental sources. Numerous individual polymerase chain reaction (PCR) and few multiplex PCR (mPCR) methods have been employed to detect these organisms by targeting toxin genes but with lack of internal amplification control (IAC). Therefore, we attempted a mPCR with IAC for the detection of enterotoxic B. cereus group strains by selecting hbl A, nhe A and cyt K genes from B. cereus, indicative of the diarrheal potential and cry I A and pag genes, the plasmid borne phenotypic markers specific to B. thuringiensis and B. anthracis strains, respectively. Multiplex PCR assay validation was performed by simultaneous comparison with the results of single-target PCR assays and correlated to the classical conventional and biochemical identification of the organisms. The mPCR was able to detect as low as 10¹–10² organisms per ml following overnight enrichment of spiked food samples (vegetable biriyani and milk) in buffered peptone water (BPW). The presence of these organisms could also be detected by mPCR in naturally contaminated samples of rice based dishes and milk. The high throughput and cost-effective mPCR method described could provide a powerful tool for simultaneous, rapid and reliable detection of enterotoxic B. cereus group organisms.     

A simple and sensitive method for detection of Bacillus anthracis by loop‐mediated isothermal amplification

Aims: To develop a rapid and simple system for detection of Bacillus anthracis using a loop‐mediated isothermal amplification (LAMP) method and determine the suitability of LAMP for rapid identification of B. anthracis infection. Methods and Results: A specific LAMP assay targeting unique gene sequences in the bacterial chromosome and two virulence plasmids, pXO1 and pXO2, was designed. With this assay, it was possible to detect more than 10 fg of bacterial DNA per reaction and obtain results within 30–40 min under isothermal conditions at 63°C. No cross‐reactivity was observed among Bacillus cereus group and other Bacillus species. Furthermore, in tests using blood specimens from mice inoculated intranasally with B. anthracis spores, the sensitivity of the LAMP assay following DNA extraction methods using a Qiagen DNeasy kit or boiling protocol was examined. Samples prepared by both methods showed almost equivalent sensitivities in LAMP assay. The detection limit was 3·6 CFU per test. Conclusions: The LAMP assay is a simple, rapid and sensitive method for detecting B. anthracis. Significance and Impact of the Study: The LAMP assay combined with boiling extraction could be used as a simple diagnostic method for identification of B. anthracis infection.     

Fluorescent Heteroduplex Assay for Monitoring Bacillus anthracis and Close Relatives in Environmental Samples

A fluorescent heteroduplex method was developed to assess the presence of 16S rRNA gene (rDNA) sequences from Bacillus anthracis and close relatives in PCR-amplified 16S rDNA sequence mixtures from environmental samples. The method uses a single-stranded, fluorescent DNA probe, 464 nucleotides in length, derived from a B. anthracis 16S rRNA gene. The probe contains a unique, engineered deletion such that all probe-target duplexes are heteroduplexes with an unpaired G at position 343 (ΔG343). Heteroduplex profiles of sequences ≥85% similar to the probe were produced using an ABI 377 sequencer in less than 3 h. The method divides strains of the Bacillus cereus-Bacillus thuringiensis-B. anthracis group into two subgroups. Each subgroup is defined by a specific 16S rRNA gene sequence type. Sequence type A, containing one mismatch with the probe, occurs in B. anthracis and a small number of closely related clonal lineages represented mostly by food-borne pathogenic isolates of B. cereus and B. thuringiensis. Sequence type B, containing two mismatches with the probe, is found in the majority of B. cereus and B. thuringiensis strains examined to date. Sequence types A and B, when hybridized to the probe, generate two easily differentiated heteroduplexes. Thus, from heteroduplex profiles, the presence of B. cereus-B. thuringiensis-B. anthracis subgroups in environmental samples can be inferred unambiguously. The results show that fluorescent heteroduplex analysis is an effective profiling technique for detection and differentiation of sequences representing small phylogenetic or functional groups in environmental samples.     

Identification and Classification of bcl Genes and Proteins of Bacillus cereus Group Organisms and Their Application in Bacillus anthracis Detection and Fingerprinting

The Bacillus cereus group includes three closely related species, B. anthracis, B. cereus, and B. thuringiensis, which form a highly homogeneous subdivision of the genus Bacillus. One of these species, B. anthracis, has been identified as one of the most probable bacterial biowarfare agents. Here, we evaluate the sequence and length polymorphisms of the Bacillus collagen-like protein bcl genes as a basis for B. anthracis detection and fingerprinting. Five genes, designated bclA to bclE, are present in B. anthracis strains. Examination of bclABCDE sequences identified polymorphisms in bclB alleles of the B. cereus group organisms. These sequence polymorphisms allowed specific detection of B. anthracis strains by PCR using both genomic DNA and purified Bacillus spores in reactions. By exploiting the length variation of the bcl alleles it was demonstrated that the combined bclABCDE PCR products generate markedly different fingerprints for the B. anthracis Ames and Sterne strains. Moreover, we predict that bclABCDE length polymorphism creates unique signatures for B. anthracis strains, which facilitates identification of strains with specificity and confidence. Thus, we present a new diagnostic concept for B. anthracis detection and fingerprinting, which can be used alone or in combination with previously established typing platforms.The Bacillus cereus group includes three closely related species, B. anthracis, B. cereus, and B. thuringiensis, as well as the more distantly related species B. mycoides and B. weihenstephanensis. These gram-positive, spore-forming bacteria form a highly homogeneous subdivision of the genus Bacillus, which also contains several other organisms belonging to the B. subtilis group. The importance and public awareness of B. cereus group organisms are associated with their distinct phenotypes and pathological effects. B. anthracis is the causative agent of anthrax, a disease that affects humans and animals worldwide and has also been developed as a biological warfare agent (17, 25). B. cereus is an opportunistic human pathogen which is responsible mainly for gastrointestinal illnesses resulting from food contamination (9), whereas B. thuringiensis is an insect pathogen whose toxin is a biological pesticide widely used in global agriculture (38). The systematics of the members of the B. cereus group poses significant challenges due to very high level of chromosomal synteny and protein identity (33). Intense efforts have focused on overcoming these challenges, and there has been a particular focus on developing methods for specific detection of B. anthracis and for differentiating among strains of these closely related organisms.Biodefense and forensic needs prompted large-scale sequencing of multiple bacillus genomes in a search for polymorphic sites for use in typing procedures (33). One type of polymorphism involves variation in the number of repeating nucleotide units that are referred to as variable-number tandem repeats (VNTRs). The resulting variation in the length and mass of the PCR products of these units can be demonstrated by gel and capillary electrophoresis (20), mass spectrometry (29), or microchannel fluidics (30). To date, several different VNTRs have been identified and tested. For example, Keim et al. studied the genetic relationship among a large collection of B. anthracis isolates based on the VNTRs found in the vrr genes (19, 20). Using a similar approach, Valjevac et al. used VNTRs of Bcms loci as markers to assess the phylogeny of members of the B. cereus group (46). Finally, length variation of the collagen-like (CL) region of the bclA gene was employed to differentiate among B. anthracis strains (6, 42).The CL sequences, which are composed of Gly-Xaa-Yaa (i.e., a glycine followed by two additional residues; GXY) repeats, have been identified in silico in more than 100 prokaryotic proteins (34). Recent studies demonstrated that some bacterial CL proteins (CLPs), such as streptococcal protein Scl and BclA, can form the collagen triple helix (4, 14, 48). Bacterial CLPs are typically surface exposed and are found in microorganisms pathogenic to humans and animals. BclA (Bacillus CLP of B. anthracis) is a major spore surface protein (41) and is found in all members of the B. cereus group (6; this study). A second CLP, designated BclB (47), was identified as a component of the B. anthracis exosporium; however, its distribution and structural properties have not been well characterized. Likewise, two closely related proteins, ExsH and ExsJ, contain GXY CL repeats and are presumably located in the exosporium of Bacillus strains (45).In this work we investigated in silico the occurrence and distribution of the bcl genes, presumably encoding CLPs, in all members of the B. cereus group. A new classification of the resulting Bcl protein variants is proposed based on the domain composition and folding of these proteins. As many as 10 bcl genes were found in a single B. cereus strain. Five genes were consistently observed in B. anthracis strains and designated bclA to bclE. We further analyzed sequence polymorphisms among these bcl genes and assessed use of them for B. anthracis detection and strain fingerprinting. Representative members of the B. cereus group and less closely related control bacilli were used to demonstrate specific bclB gene-based detection of B. anthracis spores. Finally, a combination of experiments and mathematical modeling was used to demonstrate how combined use of the bclABCDE sequence polymorphisms can be a powerful tool for strain fingerprinting in biodefense and forensic applications.     

PCR-linked reverse DNA hybridization using oligonucleotide-specific probes of rpoB for identification of Mycobacterium avium and Mycobacterium intracellulare

A PCR-linked reverse DNA hybridization method using two different specific rpoB DNA probes (Avp and Intp) of Mycobacterium avium and Mycobacterium intracellulare, respectively, were evaluated for the differentiation and identification of M. avium and M. intracellulare culture isolates. Among the 504 culture isolates tested by this method, 48 strains showed positive results for M. avium and 60 strains showed positive results for M. intracellulare. The other 396 culture isolates showed negative results for both M. avium and M. intracellulare. These results were consistent with those obtained from partial rpoB (306 bp) sequence analysis and biochemical tests. The negative strains obtained by this DNA hybridization method were identified as M. tuberculosis (366 strains), M. peregrinum (11 strains), M. abscessus (9 strains), M. fortuitum (8 strains), and M. flavescens (2 strains) by rpoB DNA sequence analysis. Due to the high sensitive and specific result obtained by this assay, we suggest that this PCR-linked reverse DNA hybridization method using two different specific rpoB DNA probes of M. avium and M. intracellulare would be used for the rapid and precise method for differentiation and identification of M. avium and M. intracellulare.     

Cloning and Nucleotide Sequence Analysis of gyrB of Bacillus cereus, B. thuringiensis, B. mycoides, and B. anthracis and Their Application to the Detection of B. cereus in Rice

As 16S rRNA sequence analysis has proven inadequate for the differentiation of Bacillus cereus from closely related species, we employed the gyrase B gene (gyrB) as a molecular diagnostic marker. The gyrB genes of B. cereus JCM 2152^T, Bacillus thuringiensis IAM 12077^T, Bacillus mycoides ATCC 6462^T, and Bacillus anthracis Pasteur #2H were cloned and sequenced. Oligonucleotide PCR primer sets were designed from within gyrB sequences of the respective bacteria for the specific amplification and differentiation of B. cereus, B. thuringiensis, and B. anthracis. The results from the amplification of gyrB sequences correlated well with results obtained with the 16S rDNA-based hybridization study but not with the results of their phenotypic characterization. Some of the reference strains of both B. cereus (three serovars) and B. thuringiensis (two serovars) were not positive in PCR amplification assays with gyrB primers. However, complete sequencing of 1.2-kb gyrB fragments of these reference strains showed that these serovars had, in fact, lower homology than their originally designated species. We developed and tested a procedure for the specific detection of the target organism in boiled rice that entailed 15 h of preenrichment followed by PCR amplification of the B. cereus-specific fragment. This method enabled us to detect an initial inoculum of 0.24 CFU of B. cereus cells per g of boiled rice food homogenate without extracting DNA. However, a simple two-step filtration step is required to remove PCR inhibitory substances.     

Rapid Identification of Bacillus anthracis Spores in Suspicious Powder Samples by Using Matrix-Assisted Laser Desorption Ionization–Time of Flight Mass Spectrometry (MALDI-TOF MS)

Rapid and reliable identification of Bacillus anthracis spores in suspicious powders is important to mitigate the safety risks and economic burdens associated with such incidents. The aim of this study was to develop and validate a rapid and reliable laboratory-based matrix-assisted laser desorption ionization–time of flight mass spectrometry (MALDI-TOF MS) analysis method for identifying B. anthracis spores in suspicious powder samples. A reference library containing 22 different Bacillus sp. strains or hoax materials was constructed and coupled with a novel classification algorithm and standardized processing protocol for various powder samples. The method''s limit of B. anthracis detection was determined to be 2.5 × 10⁶ spores, equivalent to a 55-μg sample size of the crudest B. anthracis-containing powder discovered during the 2001 Amerithrax incidents. The end-to-end analysis method was able to successfully discriminate among samples containing B. anthracis spores, closely related Bacillus sp. spores, and commonly encountered hoax materials. No false-positive or -negative classifications of B. anthracis spores were observed, even when the analysis method was challenged with a wide range of other bacterial agents. The robustness of the method was demonstrated by analyzing samples (i) at an external facility using a different MALDI-TOF MS instrument, (ii) using an untrained operator, and (iii) using mixtures of Bacillus sp. spores and hoax materials. Taken together, the observed performance of the analysis method developed demonstrates its potential applicability as a rapid, specific, sensitive, robust, and cost-effective laboratory-based analysis tool for resolving incidents involving suspicious powders in less than 30 min.