Enzymatic synthesis of new aromatic and aliphatic esters of flavonoids using Candida antarctica lipase as biocatalyst

Enzymatic acylation of rutin and esculin with aromatic, aliphatic and aryl-aliphatic acids using Candida antarctica lipase in tert amyl alcohol as solvent was investigated under low water content. Whatever the acyl donor used, the conversion yields and initial rates for esculin were higher than for rutin. For a given flavonoid, the performance of these reactions depended on the acyl donor structures. For aliphatic acids, conversion yields and initial rates of both flavonoids were respectively in the ranges of 68-90% and of 9.5×10^-2-72×10^-2 mmol l^-1 h^-1. For aromatic acids, the reaction occurred only with the aryl subgroup (cinnamic, hydrocinnamic, 3,4-dihydroxyhydrocinnamic and 4-hydroxyphenyl acetic acids) and was drastically influenced by the presence of side chain and substitution patterns of the aromatic ring. Except for hydrocinnamic acid (75%, 23.4×10^-2 mmol l^-1 h^-1), with these acids the conversion yields and initial rates were lower and in the range of 10-45% and of 0.7×10^-2 to 12.1×10^-2 mmol l^-1 h^-1. Unsaturation of the side chain of the hydrocinnamic acid decreased the esculin conversion rate from 75 to 13% and initial rate from 23.4 to 1.76×10^-2 mmol l^-1 h^-1. The presence of hydroxyl or nitro-groups on the aromatic ring of the aryl aliphatic acid also reduced conversion yields and initial rates. Even without a spacer, the non-phenolic ring acid (quinic acid) was reactive and lead to conversion yields of about 20 and 23% respectively for rutin and esculin.     

Enzymatic synthesis of new aromatic and aliphatic esters of flavonoids using Candida antarctica lipase as biocatalyst

Enzymatic acylation of rutin and esculin with aromatic, aliphatic and aryl-aliphatic acids using Candida antarctica lipase in tert amyl alcohol as solvent was investigated under low water content. Whatever the acyl donor used, the conversion yields and initial rates for esculin were higher than for rutin. For a given flavonoid, the performance of these reactions depended on the acyl donor structures. For aliphatic acids, conversion yields and initial rates of both flavonoids were respectively in the ranges of 68–90% and of 9.5×10^?2–72×10^?2 mmol l^?1 h^?1. For aromatic acids, the reaction occurred only with the aryl subgroup (cinnamic, hydrocinnamic, 3,4-dihydroxyhydrocinnamic and 4-hydroxyphenyl acetic acids) and was drastically influenced by the presence of side chain and substitution patterns of the aromatic ring. Except for hydrocinnamic acid (75%, 23.4×10^?2 mmol l^?1 h^?1), with these acids the conversion yields and initial rates were lower and in the range of 10–45% and of 0.7×10^?2 to 12.1×10^?2 mmol l^?1 h^?1. Unsaturation of the side chain of the hydrocinnamic acid decreased the esculin conversion rate from 75 to 13% and initial rate from 23.4 to 1.76×10^?2 mmol l^?1 h^?1. The presence of hydroxyl or nitro-groups on the aromatic ring of the aryl aliphatic acid also reduced conversion yields and initial rates. Even without a spacer, the non-phenolic ring acid (quinic acid) was reactive and lead to conversion yields of about 20 and 23% respectively for rutin and esculin.     

Effect of acyl donor chain length and substitutions pattern on the enzymatic acylation of flavonoids

Rutin and esculin were enzymatically acylated with different aliphatic acids as acyl donors (fatty acids, dicarboxylic acids and ω-substituted fatty acids) by an immobilized lipase from Candida antarctica. The effect of the water content and the acyl donors pattern on the flavonoid initial acylation rate and conversion yield were investigated. The obtained results indicated that the water content of the medium has a strong effect on the performance of these reactions. The best conversion yields were reached when the water content was kept lower than 200 ppm. At low water content of the medium, these syntheses are influenced by carbon chain length and substitution pattern of the acyl donors. Higher conversion yields of esculin and rutin (>70%) were obtained with aliphatic acids having high carbon chain length (>12). Moreover, it has been found that the amine and thiol groups on ω-substituted fatty acid chain were unfavourable to these reactions. The ¹H NMR and ¹³C NMR analyses of some synthesized esters (esculin and rutin palmitate) show that only monoesters were produced and that the esterification takes place on the primary OH of glucose moiety of the esculin and on the secondary 4′′′-OH of the rhamnose residue of rutin.     

Regioselective acylation of several polyhydroxylated natural compounds by Candida antarctica lipase B

Regioselective acylation of four polyhydroxylated natural compounds, deacetyl asperulosidic acid (1), asperulosidic acid (2), puerarin (3) and resveratrol (4) by Candida antarctica Lipase B in the presence of various acyl donors (vinyl acetate, vinyl decanoate or vinyl cinnamoate) was studied. Compounds 1, 2 and 4 were regioselectively acetylated with vinyl acetate to afford products, 3'-O-acetyl-10-O-deacetylasperulosidic acid (1a), 3',6'-O-diacetyl-10-O-deacetylasperulosidic acid (1b), 3'-O-acetylasperulosidic acid (2a), 3',6'-O-diacetylasperulosidic acid (2b), 4'-O-acetylresveratrol (4a), respectively, with yields of 22 to 50%, while reactions with vinyl decanoate and vinyl cinnamoate were slow with lower yields. Compound 3 was readily acylated with all three acyl donors and quantitatively converted to products 6'-O-acetylpuerarin (3a), 6'-O-decanoylpuerarin (3b), 6'-O-cinnamoylpuerarin (3c), respectively. The structures of these acylated products were determined by spectroscopic methods (MS and NMR).     

Regioselective acylation of several polyhydroxylated natural compounds by Candida antarctica lipase B

Regioselective acylation of four polyhydroxylated natural compounds, deacetyl asperulosidic acid (1), asperulosidic acid (2), puerarin (3) and resveratrol (4) by Candida antarctica Lipase B in the presence of various acyl donors (vinyl acetate, vinyl decanoate or vinyl cinnamoate) was studied. Compounds 1, 2 and 4 were regioselectively acetylated with vinyl acetate to afford products, 3′-O-acetyl-10-O-deacetylasperulosidic acid (1a), 3′,6′-O-diacetyl-10-O-deacetylasperulosidic acid (1b), 3′-O-acetylasperulosidic acid (2a), 3′,6′-O-diacetylasperulosidic acid (2b), 4′-O-acetylresveratrol (4a), respectively, with yields of 22 to 50%, while reactions with vinyl decanoate and vinyl cinnamoate were slow with lower yields. Compound 3 was readily acylated with all three acyl donors and quantitatively converted to products 6″-O-acetylpuerarin (3a), 6″-O-decanoylpuerarin (3b), 6″-O-cinnamoylpuerarin (3c), respectively. The structures of these acylated products were determined by spectroscopic methods (MS and NMR).     

Green enzymatic production of glyceryl monoundecylenate using immobilized Candida antarctica lipase B

Enzymatic synthesis of glyceryl monoundecylenate (GMU) was performed using indigenously immobilized Candida anatarctica lipase B preparation (named as PyCal) using glycerol and undecylenic acid as substrates. The effect of molar ratio, enzyme load, reaction time, and organic solvent on the reaction conversion was determined. Both batch and continuous processes for GMU synthesis with shortened reaction time were developed. Under optimized batch reaction conditions such as 1:5 molar ratio of undecylenic acid and glycerol, 2?h of reaction time at 30% substrate concentration in tert-butyl alcohol, conversion of 82% in the absence of molecular sieve, and conversion of 93% in the presence of molecular sieve were achieved. Packed bed reactor studies resulted in high conversion of 86% in 10-min residence time. Characterization of formed GMU was performed by FTIR, MS/MS. Enzymatic process resulted in GMU as a predominant product in high yield and shorter reaction time periods with GMU content of 92% and DAG content of 8%. Optimized GMU synthesis in the present study can be used as a useful reference for industrial synthesis of fatty acid esters of glycerol by the enzymatic route.     

Understanding the effect of tert-butanol on Candida antarctica lipase B using molecular dynamics simulations

The use of organic solvents as reaction media for enzymatic reactions has many advantages. Several organic solvents have been proposed as reaction media, especially for transesterifications using Candida antarctica lipase B (CalB). Among organic solvents, tert-butanol is associated with an enhanced conversion rate in bio-diesel production. Thus, it is necessary to understand the effect of tert-butanol on CalB to explain the high-catalytic efficiency compared with the reaction in other hydrophilic organic solvents. In this study, the effects of tert-butanol on the structure of CalB were investigated by MD simulations. The overall flexibility was increased in the presence of tert-butanol. The substrate entrance and the binding pocket size of CalB in tert-butanol were maintained as in TIP3P water. The distance between the catalytic residues of CalB in tert-butanol indicated a higher likelihood of forming hydrogen bonds. These structural analyses could be useful for understanding the effect of tert-butanol on lipase transesterification.     

Catalytic properties of Candida antarctica lipase B clusters solubilized in hexane

The objective of this work was to investigate the particle size and determine the catalytic competency of a solubilized lipase in hexane. Purified Candida antarctica lipase B (CALB) was solubilized in hexane using the non-ionic surfactant Span 60. The amount of surfactant was chosen so that complete coverage of the individual enzyme molecules with surfactant was not possible. Dynamic Light Scattering (DLS) was used to directly investigate the particle size of the solubilized entities. The enzyme was found to be solubilized in the form of clusters of lipase molecules with a radius of 37±5 nm at 42°C, which we estimate to correspond to about 1200 CALB molecules. The solubilized enzyme clusters showed lower catalytic activity in a model esterification reaction in hexane compared with a commercial immobilizate of the same enzyme (Novozym 435). Further gains in catalytic activity may be possible by striving for true molecular-level dispersion of the enzyme in hexane.     

Transgenic rice as bioreactor for production of the Candida antarctica lipase B

Candida antarctica lipase B (CALB) is a versatile biocatalyst used for a wide range of biotransformation. Methods for low cost production of this enzyme are highly desirable. Here, we report a mass production method of CALB using transgenic rice seeds as the bioreactor. The transgenic rice transformed with the CALB gene under the control of the promoter of the rice seed storage protein GT1 was found to have accumulated a large quantity of CALB in seeds. The transgenic line with the highest lipolytic activity reached to 85 units per gram of dry seeds. One unit is defined as the amount of lipase necessary to liberate 1 μmol p‐nitrophenol from p‐nitrophenyl butyrate in 1 min. The rice recombinant lipase (rOsCALB) from this line represents 40% of the total soluble proteins in the crude seed extracts. The enzyme purified from the rice seeds had an optimal temperature of 40 °C, and optimal pH of 8.5, similar to that of the fermentation products. Test of its conversion ability as a biocatalyst for biodiesel production suggested that rOsCALB is functionally identical to the fermentation products in its industrial application.     

Candida antarctica lipase B catalyzed enantioselective acylation of pyrimidine acyclonucleoside

Abstract

The influence of solvent and acyl group donor on selectivity of the transesterification reaction of 1-[1′,3′-dihydroxy-2′-propoxymethyl]-5-methyluracil, a structural analogue of ganciclovir was examined. Lipase (EC 3.1.1.3) B from Candida antarctica (CALB) enabled desymmetrization of prochiral hydroxyl groups when 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF₆]) was used as a reaction medium. It was observed that CALB was up to 2.7–4 times more enantioselective in the ionic liquid [Bmim][PF₆] than in conventional organic solvents.     

Improved triglyceride transesterification by circular permuted Candida antarctica lipase B

Lipases represent a versatile class of biocatalysts with numerous potential applications in industry including the production of biodiesel via enzyme‐catalyzed transesterification. In this article, we have investigated the performance of cp283, a variant of Candida antarctica lipase B (CALB) engineered by circular permutation, with a series of esters, as well as pure and complex triglycerides. In comparison with wild‐type CALB, the permutated enzyme showed consistently higher catalytic activity (2.6‐ to 9‐fold) for trans and interesterification of the different substrates with 1‐butanol and ethyl acetate as acyl acceptors. Differences in the observed rates for wild‐type CALB and cp283 are believe to be related to changes in the rate‐determining step of the catalytic cycle as a result of circular permutation. Biotechnol. Bioeng. 2010;105: 44–50. © 2009 Wiley Periodicals, Inc.     

南极假丝酵母脂肪酶B在离子液体/超临界流体体系中的稳定性模拟

脂肪酶在离子液体/超临界流体体系中的结构稳定性是影响其活性的重要因素。本文采用分子动力学方法分别研究了南极假丝酵母脂肪酶B(CALB)在离子液体CYPHOS IL-201/极性超临界流体CHF_3两相体系和离子液体CYPHOS IL-201/非极性超临界流体CO_2两相体系中的结构稳定性,揭示影响CALB结构稳定性的因素。研究结果表明,在超临界CHF_3中,CHF_3破坏蛋白维持α螺旋结构的氢键是蛋白结构不稳定的主要原因;在超临界CO_2中,CALB蛋白的结构紧密性降低,有序二级结构发生了变化,导致稳定性下降。离子液体和两种超临界流体均形成了两相体系,蛋白处于离子液体相中,离子液体不溶于超临界流体,但超临界流体部分进入离子液体相,降低了离子液体相的黏度。其中,相比于CYPHOS IL-201/CO_2体系,CYPHOS IL-201/CHF_3体系的黏度降低多。在离子液体CYPHOS IL-201与超临界流体(CHF_3、CO_2)形成的两相体系中,离子液体CYPHOS IL-201具有保护蛋白结构的作用,使CALB蛋白结构更加稳定。     

毕赤酵母表面展示南极假丝酵母脂肪酶B全细胞催化合成葡萄糖月桂酸酯

利用表面展示南极假丝酵母脂肪酶B(Candida antarctica lipase B,CALB)的毕赤酵母细胞为全细胞催化剂,以葡萄糖为酰基受体,月桂酸为酰基供体,在非水相体系中催化合成糖酯。用硅胶柱层析对产物进行初提,再用制备液相色谱进一步分离纯化,并用高效液相色谱-质谱鉴定纯品性质。对该酶法合成糖脂反应体系进行了优化,其中考察了有机溶剂种类、复合溶剂体系中二甲基亚砜(DMSO)体积百分比、酶量、底物摩尔比、水活度和温度等几个影响酯化反应的因素。结果表明:在5mL反应体系中,以叔戊醇/二甲基亚砜(DMSO30%,V/V)为反应介质,添加初始水活度为0.11的全细胞催化剂0.5g,葡萄糖0.5mmol/L,月桂酸1.0mmol/L,60°C下反应72h后,葡萄糖月桂酸单酯的转化率达到48.7%。     

南极假丝酵母脂肪酶A的表面展示及酶学性质研究

采用a凝集素作为载体蛋白,首次将南极假丝酵母脂肪酶A展示在酿酒酵母细胞表面,通过MD平板筛选获得表面展示型的CALA酵母工程菌株。免疫荧光检测显示CALA被成功展示在酵母细胞壁表面,重组子经诱导后能在三丁酸甘油酯板上形成透明圈,说明展示的CALA具有活性。重组酵母在液体培养基培养72 h,活性达到最高,为80.4 U/g干细胞。酿酒酵母展示的CALA最适温度及pH值为70°C和pH 8.0。经50°C保温2 h,仍含有60%水解酶活力。展示的CALA在pH 7.0和pH 8.0溶液中比较稳定。经DMSO处理2 h,展示的CALA仍保持70%的活性。以上结果表明酵母展示的CALA可作为一种有潜质商业用途的全细胞催化剂。     

Inhibition of Candida rugosa lipase by saponins, flavonoids and alkaloids

Lipase inhibitors have generated a great interest because they could help in the prevention or the therapy of lipase-related diseases. Therefore, the aim of the work was to evaluate by HPLC, and using Candida rugosa lipase as model, the inhibitory effect of several saponins: β-aescin, digitonin, glycyrrhizic acid (GA) and Quillaja saponin (QS); flavonoids: 3-hydroxyflavone, 5-hydroxyflavone, (±)-catechin and kaempferol; and alkaloids: aspidospermine, papaverine, physostigmine, pilocarpine, raubasine, rescinnamine, reserpine and trigonelline.

The inhibition produced by most of these compounds is described here for the first time. Saponins appeared very active, being β-aescin and digitonin the most active compounds (IC₅₀ = 0.8–2.4 × 10⁻⁵ M). The inhibitory activity of flavonoids was lower than that of saponins (except GA), and (±)-catechin and kaempferol were the most active. Alkaloids was the most heterogeneous group assayed, varying from rescinnamine, with an IC₁₆ similar to that of digitonin, to papaverine and others which showed almost no inhibition.

In conclusion, β-aescin, digitonin, kaempferol or (±)-catechin, strong lipase inhibitors with a low toxicity and present herbal drugs used for lipase-related diseases such as acne or ulcer, are promising candidates for the prevention or the treatment of these diseases.     

Regioselective acylation of flavonoids catalyzed by immobilized Candida antarctica lipase under reduced pressure

A single-step acylation of rutin and naringin, catalyzed by immobilized Candida antarctica lipase B in 2-methyl-2-butanol, occurred preferentially on the primary hydroxyl group. Using palmitic methyl ester as acyl donor, the acylation rate of naringin was 10-fold higher than that of rutin. Under optimal conditions, i.e. a molar ratio acyl donor/naringin of 7:1 and 200 mbar, 92% naringin was acylated.     

Biotechnological applications of Candida antarctica lipase A: State-of-the-art

The yeast Candida antarctica produces two different lipases, lipases A and B. While lipase B (CAL-B) is probably the mostly employed hydrolase in the biocatalysis field, the use of the lipase A (CAL-A) has been rather scarce and consequently its tridimensional structure has not been elucidated yet. However, CAL-A is a useful biocatalyst with many different applications that have been described especially in the last few years. Its attractiveness results from its unique features among hydrolases: the high thermostability, allowing operation at T > 90 °C; the ability to accept tertiary and sterically hindered alcohols, which has recently been attributed to the existence of a specific aminoacidic sequence in the active site; the sn-2 recognition in hydrolysis of triglycerides; the selectivity towards trans-fatty acids; the stability in the acidic pH range. Furthermore, it is considered to be an excellent biocatalyst for the asymmetric synthesis of amino acids/amino esters, due to its chemoselectivity towards amine groups. Considering all these aspects, in the present review, the origin, the properties and the applications of the CAL-A are briefly described and discussed, pointing out the unique characteristics of this biocatalyst.     

Immobilization of Candida antarctica lipase B (CALB) on surface-modified rice husk ashes (RHA) via physical adsorption and cross-linking methods

In the present study, the recovery of activity of Candida antarctica lipase B (CALB) immobilized onto surface-modified rice husk ash (RHA) was 90% for both cross-linking and adsorption methods. Both cross-linked and adsorbed immobilized preparations were very stable, retaining more than 48% of their activity over the range of temperatures studied. The optimum temperature and optimum pH values were 37?°C and 7.0, respectively for both immobilized preparations, while the relative activities after storage at 4.0?°C for 60 days were 55% and 65% using cross-linking and adsorption methods, respectively. Also, the activity of the immobilized lipase began to decrease after 10 cycles, more than 58% of the initial activities were still retained after 10 cycles for both immobilization methods. These results indicated that lipase immobilized by cross-linking and adsorption not only effected activity recovery, but also remarkably effected stability, reusability and application adaptability. It can be concluded that, surface-modified RHA can be used as alternative supports for immobilization of CALB for polymerization reactions.     

Lipase B from Candida antarctica catalyses enantioselective transesterification of 2-(4-methoxybenzyl)-1-cyclohexanols and 2-(4-methoxybenzyl)-1-cyclopentanols

The 2-(4-methoxybenzyl)-1-cyclohexanols and 2-(4-methoxybenzyl)-1-cyclopentanols are the basic structure of a series of juvenile hormone analogs which act as insect growth regulators. Their enantioselective transesterification with the lipase B from Candida antarctica produced pure enantiomers of R-cyclohexyl and R-cyclopentyl acetates (i.e. ee_p > 99%). Differences observed in the resolution of the four racemic compounds are in accordance with model structure of secondary alcohols suitable for catalysis.