Identification and characterization of novel esterases from a deep-sea sediment metagenome

A deep-sea sediment metagenomic library was constructed and screened for lipolytic enzymes by activity-based approach. Nine novel lipolytic enzymes were identified, and the amino acid sequences shared 56% to 84% identity to other lipolytic enzymes in the database. Phylogenetic analysis showed that these enzymes belonged to family IV lipolytic enzymes. One of the lipolytic enzymes, Est6, was successfully cloned and expressed in Escherichia coli Rosetta in a soluble form. The recombinant protein was purified by Ni-nitrilotriacetic affinity chromatography column and characterized using p-nitrophenyl esters with various chain lengths. The est6 gene consisted of 909 bp that encoded 302 amino acid residues. Est6 was most similar to a lipolytic enzyme from uncultured bacterium (ACL67845, 61% identity) isolated from the South China Sea marine sediment metagenome. The characterization of Est6 revealed that it was a cold-active esterase and exhibited the highest activity toward p-nitrophenyl butyrate (C4) at 20°C and pH 7.5.     

A novel,versatile family IV carboxylesterase exhibits high stability and activity in a broad pH spectrum

Objectives

To investigate the properties of a novel metagenome-derived member of the hormone-sensitive lipase family of lipolytic enzymes.

Results

A forest soil metagenome-derived gene encoding an esterase (Est06) belonging to the hormone-sensitive lipase family of lipolytic enzymes was subcloned, heterologously expressed and characterized. Est06 is a polypeptide of 295 amino acids with a molecular mass of 31 kDa. The deduced protein sequence shares 61% similarity with a hypothetical protein from the marine symbiont Candidatus Entotheonella sp. TSY1. Purified Est06 exhibited high affinity for acyl esters with short-chain fatty acids, and showed optimum activity with p-nitrophenyl valerate (C5). Maximum enzymatic activity was at 50 °C and pH 7. Est06 exhibited high stability at moderate temperatures by retaining all of its catalytic activity below 30 °C over 13 days. Additionally, Est06 displayed high stability between pH 5 and 9. Esterase activity was not inhibited by metal ions or detergents, although organic solvents decreased activity.

Conclusions

The combination of Est06 properties place it among novel biocatalysts that have potential for industrial use including low temperature applications.

     

Overexpression, Purification, and Biochemical Characterization of the Esterase Est0796 from Lactobacillus plantarum WCFS1

Lactobacillus plantarum is a lactic acid bacterium that is encountered in an extensive range of foods such as fermented dairy products, meat, vegetables, and bakery products. Given the little molecular information available on the lipolytic activity of L. plantarum, the aim of this study was to clone, purify, and biochemically characterize the esterase coded by gene lp_0796 (Est0796). The esterase was cloned in pET28a and purified in two steps, using solid ammonium sulfate and His tag affinity chromatography. The molecular mass of the purified Est0796 was 28.7 kDa (by SDS-PAGE) and 26.6 kDa (by gel filtration chromatography), pointing to a monomeric structure. Est0796 showed maximum activity at pH 8.0 and 35 °C and toward shorter acyl chain lengths (C₂–C₄). The activity was resistant to organic solvents and cations, suggesting that this esterase may play a role in the fermentation of food products.     

Molecular cloning,over expression and characterization of thermoalkalophilic esterases isolated from <Emphasis Type="Italic">Geobacillus</Emphasis> sp.

Due to potential use for variety of biotechnological applications, genes encoding thermoalkalophilic esterase from three different Geobacillus strains isolated from thermal environmental samples in Balçova (Agamemnon) geothermal site were cloned and respective proteins were expressed in Escherichia coli (E.coli) and characterized in detail. Three esterases (Est1, Est2, Est3) were cloned directly by PCR amplification using consensus degenerate primers from genomic DNA of the strains Est1, Est2 and Est3 which were from mud, reinjection water and uncontrolled thermal leak, respectively. The genes contained an open reading frame (ORF) consisting of 741 bp for Est1 and Est2, which encoded 246 amino acids and ORF of Est3 was 729 bp encoded 242 amino acids. The esterase genes were expressed in E. coli and purified using His-Select HF nickel affinity gel. The molecular mass of the recombinant enzyme for each esterase was approximately 27.5 kDa. The three esterases showed high specific activity toward short chain p-NP esters. Recombinant Est1, Est2, Est3 have exhibited similar activity and the highest esterase activity of 1,100 U/mg with p-nitrophenyl acetate (pNPC₂) as substrate was observed with Est1. All three esterase were most active around 65°C and pH 9.5–10.0. The effect of organic solvents, several metal ions, inhibitors and detergents on enzyme activity for purified Est1, Est2, Est3 were determined separately and compared.     

Characterization of a cold-adapted and salt-tolerant esterase from a psychrotrophic bacterium Psychrobacter pacificensis

An esterase gene, est10, was identified from the genomic library of a deep-sea psychrotrophic bacterium Psychrobacter pacificensis. The esterase exhibited the optimal activity around 25 °C and pH 7.5, and maintained as high as 55.0 % of its maximum activity at 0 °C, indicating its cold adaptation. Est10 was fairly stable under room temperatures, retaining more than 80 % of its original activity after incubation at 40 °C for 2 h. The highest activity was observed against the short-chain substrate p-nitrophenyl butyrate (C4) among the tested p-nitrophenyl esters (C2–C16). It was slightly activated at a low concentration (1 mM) of Zn²⁺, Mg²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Fe³⁺, urea and EDTA, but was inhibited by DTT and totally inactivated by PMSF. Interestingly, increased salinity considerably stimulated Est10 activity (up to 143.2 % of original activity at 2 M NaCl) and stability (up to 126.4 % after incubation with 5 M NaCl for 6.5 h), proving its salt tolerance. 0.05 and 0.1 % Tween 20, Tween 80, Triton X-100 and CHAPS increased the activity and stability of Est10 while SDS, CTAB had the opposite effect. Est10 was quite active after incubation with several 30 % organic solvents (methanol, DMSO, ethanediol) but exhibited little activity with 30 % isopropanol, ethanol, n-butanol and acetonitrile.     

Construction of a novel lipolytic fusion biocatalyst GDEst-lip for industrial application

The gene encoding esterase (GDEst-95) from Geobacillus sp. 95 was cloned and sequenced. The resulting open reading frame of 1497 nucleotides encoded a protein with calculated molecular weight of 54.7 kDa, which was classified as a carboxylesterase with an identity of 93–97% to carboxylesterases from Geobacillus bacteria. This esterase can be grouped into family VII of bacterial lipolytic enzymes, was active at broad pH (7–12) and temperature (5–85 °C) range and displayed maximum activity toward short acyl chain p-nitrophenyl (p-NP) esters. Together with GD-95 lipase from Geobacillus sp. strain 95, GDEst-95 esterase was used for construction of fused chimeric biocatalyst GDEst-lip. GDEst-lip esterase/lipase possessed high lipolytic activity (600 U/mg), a broad pH range of 6–12, thermoactivity (5–85 °C), thermostability and resistance to various organic solvents or detergents. For these features GDEst-lip biocatalyst has high potential for applications in various industrial areas. In this work the effect of additional homodomains on monomeric GDEst-95 esterase and GD-95 lipase activity, thermostability, substrate specificity and catalytic properties was also investigated. Altogether, this article shows that domain fusing strategies can modulate the activity and physicochemical characteristics of target enzymes for industrial applications.     

Identification and characterization of a novel cold-adapted esterase from a metagenomic library of mountain soil

A novel lipolytic enzyme was isolated from a metagenomic library after demonstration of lipolytic activity on an LB agar plate containing 1% (w/v) tributyrin. A novel esterase gene (estIM1), encoding a lipolytic enzyme (EstIM1), was cloned using a shotgun method from a pFosEstIM1 clone of the metagenomic library, and the enzyme was characterized. The estIM1 gene had an open reading frame (ORF) of 936 base pairs and encoded a protein of 311 amino acids with a molecular mass 34 kDa and a pI value of 4.32. The deduced amino acid sequence was 62% identical to that of an esterase from an uncultured bacterium (ABQ11271). The amino acid sequence indicated that EstIM1 was a member of the family IV of lipolytic enzymes, all of which contain a GDSAG motif shared with similar enzymes of lactic acid microorganisms. EstIM1 was active over a temperature range of 1–50°C, at alkaline pH. The activation energy for hydrolysis of p-nitrophenyl propionate was 1.04 kcal/mol, within a temperature range of 1–40°C. The activity of EstIM1 was about 60% of maximal even at 1°C, suggesting that EstIM1 is efficiently cold-adapted. Further characterization of this cold-adapted enzyme indicated that the esterase may be very valuable in industrial applications.     

Characterization and immobilization of a novel SGNH hydrolase (Est24) from Sinorhizobium meliloti

A novel oligomeric SGNH hydrolase (Est24) from Sinorhizobium meliloti was identified, actively expressed in Escherichia coli, characterized, and immobilized for industrial application. Sequence analysis of Est24 revealed a putative catalytic triad (Ser¹³-Asp¹⁶³-His¹⁶⁹), with moderate homology to other SGNH hydrolases. Est24 was more active toward short-chain esters, such as p-nitrophenyl acetate, butyrate, and valerate, while the S13A mutant completely lost its activity. Moreover, the activity of Est24 toward α- and β-naphthyl acetate, and enantioselectivity on (R)- and (S)-methyl-3-hydroxy-2-methylpropionate were tested. Est24 exhibited optimum activity at mesophilic temperature ranges (45–55 °C), and slightly alkaline pH (8.0). Structural and mutagenesis studies revealed critical residues involved in the formation of a catalytic triad and substrate-binding pocket. Cross-linked enzyme aggregates (CLEAs) of Est24 with and without amyloid fibrils were prepared, and amyloid fibril-linked Est24 with amyloid fibrils retained 83 % of its initial activity after 1 h of incubation at 60 °C. The high thermal stability of immobilized Est24 highlights its potential in the pharmaceutical and chemical industries.     

Characterization of a novel cold-active esterase isolated from swamp sediment metagenome

A functional screen of a metagenomic library from “Upo” swamp sediment in Korea identified a gene EstL28, the product of which displayed lipolytic properties on a tributyrin-supplemented medium. The EstL28 sequence encodes a 290 amino acid protein (designated as EstL28), with a predicted molecular weight of 31.3 kDa. The encoded EstL28 protein exhibited the highest sequence similarity (45 %) to a hydrolase found in Streptococcus sanguinis. Phylogenetic analysis indicated that EstL28 belongs to a currently uncharacterized family of esterases. Within the conserved α/β-hydrolase 6 domain, the EstL28 retains the catalytic triad Ser₁₀₃–Asp₂₄₈–His₂₆₈ that is typical of esterases. The Ser₁₀₃ residue in the catalytic triad is located in the consensus pentapeptide motif GXSXG. The purified EstL28 enzyme worked optimally at 35 °C and pH 8.5 and remained stable at temperatures lower than 20 °C. The catalytic activity of EstL28 was maximal with p-nitrophenyl butyrate, indicating that it was an esterase. This enzyme also exhibited stable activity in the presence of methanol, ethanol, isopropanol, and dimethyl sulfoxide. Therefore, the level of stability in organic solvents and cold temperature suggests that EstL28 has potential for many biotechnological applications.     

Extremely Stable and Versatile Carboxylesterase from a Hyperthermophilic Archaeon

We have found that the hyperthermophilic archaeon Pyrobaculum calidifontis VA1 produced a thermostable esterase. We isolated and sequenced the esterase gene (est_Pc) from strain VA1. est_Pc consisted of 939 bp, corresponding to 313 amino acid residues with a molecular mass of 34,354 Da. As est_Pc showed significant identity (30%) to mammalian hormone-sensitive lipases (HSLs), esterase of P. calidifontis (Est) could be regarded as a new member of the HSL family. Activity levels of the enzyme were comparable or higher than those of previously reported enzymes not only at high temperature (6,410 U/mg at 90°C), but also at ambient temperature (1,050 U/mg at 30°C). The enzyme displayed extremely high thermostability and was also stable after incubation with various water-miscible organic solvents at a concentration of 80%. The enzyme also exhibited activity in the presence of organic solvents. Est of P. calidifontis showed higher hydrolytic activity towards esters with short to medium chains, with p-nitrophenyl caproate (C₆) the best substrate among the p-nitrophenyl esters examined. As for the alcoholic moiety, the enzyme displayed esterase activity towards esters with both straight- and branched-chain alcohols. Most surprisingly, we found that this Est enzyme hydrolyzed the tertiary alcohol ester tert-butyl acetate, a feature very rare among previously reported lipolytic enzymes. The extreme stability against heat and organic solvents, along with its activity towards a tertiary alcohol ester, indicates a high potential for the Est of P. calidifontis in future applications.     

Characterization of three new carboxylic ester hydrolases isolated by functional screening of a forest soil metagenomic library

Three new lipolytic genes were isolated from a forest soil metagenomic library by functional screening on tributyrin agar plates. The genes SBLip1, SBLip2 and SBLip5.1 respectively encode polypeptides of 445, 346 and 316 amino acids. Phylogenetic analyses revealed that SBLip2 and SBLip5.1 belong to bacterial esterase/lipase family IV, whereas SBLip1 shows similarity to class C β-lactamases and is thus related to esterase family VIII. The corresponding genes were overexpressed and their products purified by affinity chromatography for characterization. Analyses of substrate specificity with different p-nitrophenyl esters showed that all three enzymes have a preference for short-acyl-chain p-nitrophenyl esters, a feature of carboxylesterases as opposed to lipases. The β-lactamase activity of SBLip1, measured with the chromogenic substrate nitrocefin, was very low. The three esterases have the same optimal pH (pH 10) and remain active across a relatively broad pH range, displaying more than 60 % activity between pH 6 and 10. The temperature optima determined were 35 °C for SBLip1, 45 °C for SBLip2 and 50 °C for SBLip5.1. The three esterases displayed different levels of tolerance to salts, solvents and detergents, SBLip2 being overall more tolerant to high concentrations of solvent and SBLip5.1 less affected by detergents.     

Heterologous expression and biochemical characterization of acetyl xylan esterase from Coprinopsis cinerea

Acetyl xylan esterase (AXE) from basidiomycete Coprinopsis cinerea Okayama 7 (#130) was functionally expressed in Pichia pastoris with a C-terminal tag under the alcohol oxidase 1 (AOX1) promoter and secreted into the medium at 1.5 mg l^?1. Its molecular mass was estimated to be 65.5 kDa based on the SDS-PAGE analysis, which is higher than the calculated molecular mass of 40 kDa based on amino acid composition. In-silico analysis of the amino acid sequence predicted two potential N-glycosylation sites. Results from PNGase F deglycosylation and mass spectrum confirmed the presence of N-glycosylation on the recombinant AXE with predominant N-glycans HexNAc₂Hex_9–16. The recombinant AXE showed best activity at 40 °C and pH 8. It showed not only acetyl esterase activity with a K_m of 4.3 mM and a V_max of 2.15 U mg^?1 for hydrolysis of 4-nitrophenyl acetate but also a butyl esterase activity for hydrolysis of 4-nitrophenyl butyrate with a K_m of 0.11 mM and V_max of 0.78 U mg^?1. The presence of two additional amino acid residues at its native N-terminus was found to help stabilize the enzyme against the protease cleavages without affecting its activity.     

Cloning, expression and characterization of a novel esterase from Bacillus pumilus

The gene encoding esterase (CE1) from Bacillus pumilus ARA with a calculated molecular weight of 28.4 kDa was cloned, sequenced and efficiently expressed in Escherichia coli. The open reading frame of 747 nucleotides encoded a protein, which was classified as a carboxylesterase with an identity of 87 % to esterase from Bacillus subtilis 168. Recombinant CE1 was purified in a single step to electrophoretic homogeneity by IMAC (Ni²⁺). The enzyme displayed maximum activity toward p-nitrophenyl (pNP) acetate at 37–40 °C and pH?6.5–7.0. It was stable in the pH range from 6.5 to 8.0, and at temperature from 25 to 40 °C. Among four p-nitrophenyl esters tested, the best substrate was pNP acetate with K _m and k _cat values of 0.33 mM and 4.07 s^?1, respectively. Amounts of 2 mM Ca²⁺ and Co²⁺ significantly increased the esterase activity to 190 and 121 %, respectively. These results suggest that CE1 has very attractive applications of increasing feed digestibility in animal nutrition in this moderate temperature range.     

A novel thermoalkalostable esterase from Acidicaldus sp. strain USBA-GBX-499 with enantioselectivity isolated from an acidic hot springs of Colombian Andes

Several thermo- and mesoacidophilic bacterial strains that revealed high lipolytic activity were isolated from water samples derived from acidic hot springs in Los Nevados National Natural Park (Colombia). A novel lipolytic enzyme named 499EST was obtained from the thermoacidophilic alpha-Proteobacterium Acidicaldus USBA-GBX-499. The gene estA encoded a 313-amino-acid protein named 499EST. The deduced amino acid sequence showed the highest identity (58 %) with a putative α/β hydrolase from Acidiphilium sp. (ZP_08632277.1). Sequence alignments and phylogenetic analysis indicated that 499EST is a new member of the bacterial esterase/lipase family IV. The esterase reveals its optimum catalytic activity at 55 °C and pH 9.0. Kinetic studies showed that 499EST preferentially hydrolyzed middle-length acyl chains (C6-C8), especially p-nitrophenyl (p-NP) caproate (C6). Its thermostability and activity were strongly enhanced by adding 6 mM FeCl₃. High stability in the presence of water-miscible solvents such as dimethyl sulfoxide and glycerol was observed. This enzyme also exhibits stability under harsh environmental conditions and enantioselectivity towards naproxen and ibuprofen esters, yielding the medically relevant (S)-enantiomers. In conclusion, according to our knowledge, 499EST is the first thermoalkalostable esterase derived from a Gram-negative thermoacidophilic bacterium.     

Isolation and characterization of a thermostable esterase from a metagenomic library

A novel esterase gene was isolated by functional screening of a metagenomic library prepared from an activated sludge sample. The gene (est-XG2) consists of 1,506 bp with GC content of 74.8 %, and encodes a protein of 501 amino acids with a molecular mass of 53 kDa. Sequence alignment revealed that Est-XG2 shows a maximum amino acid identity (47 %) with the carboxylesterase from Thermaerobacter marianensis DSM 12885 (YP_004101478). The catalytic triad of Est-XG2 was predicted to be Ser₁₉₂-Glu₃₁₃-His₄₁₂ with Ser₁₉₂ in a conserved pentapeptide (GXSXG), and further confirmed by site-directed mutagenesis. Phylogenetic analysis suggested Est-XG2 belongs to the bacterial lipase/esterase family VII. The recombinant Est-XG2, expressed and purified from Escherichia coli, preferred to hydrolyze short and medium length p-nitrophenyl esters with the best substrate being p-nitrophenyl acetate (K _m and k _cat of 0.33 mM and 36.21 s^?1, respectively). The purified enzyme also had the ability to cleave sterically hindered esters of tertiary alcohols. Biochemical characterization of Est-XG2 revealed that it is a thermophilic esterase that exhibits optimum activity at pH 8.5 and 70 °C. Est-XG2 had moderate tolerance to organic solvents and surfactants. The unique properties of Est-XG2, high thermostability and stability in the presence of organic solvents, may render it a potential candidate for industrial applications.     

Molecular cloning and characterization of a novel family VIII alkaline esterase from a compost metagenomic library

A metagenomic library was constructed from completely fermented compost using a fosmid vector. From a total of 23,400 clones, 19 esterase-positive clones were selected on LB plates containing 1% glyceryl tributyrate as the substrate. The esterase gene of an esterase-positive clone, est2K, was on an ORF of 1299 bp and encoded a protein of 432 amino acids. Est2K had a SMTK motif and was a family VIII esterase. Unlike most family VIII esterases, Est2K had a signal peptide of 27 amino acids. The molecular mass and pI of the mature Est2K was calculated to be 44,668 Da and 4.48, respectively. The amino acid sequence of Est2K showed 72% identity with that of EstC, an esterase of an uncultured bacterium from leachate. The purified Est2K was optimally active at pH 10.0 and 50 °C. Est2K was stable in the presence of 30% methanol and exhibited a 2.4-fold higher activity in the presence of 5% methanol than in the presence of 1% isopropanol. Est2K preferred short to medium length p-nitrophenyl esters, especially p-nitrophenyl butyrate, as the substrate. Est2K did not hydrolyze β-lactam antibiotics ampicillin and nitrocefin, even though Est2K showed the highest similarity to EstC.     

An esterase from the basidiomycete Pleurotus sapidus hydrolyzes feruloylated saccharides

Investigating the secretion of esterases by the basidiomycetous fungus Pleurotus sapidus in a Tween 80-rich nutrient medium, an enzyme was discovered that hydrolyzed the ester bond of feruloylated saccharides. The enzyme was purified by ion exchange and size exclusion chromatography. Polyacrylamide gel electrophoresis analysis showed a monomeric protein of about 55 kDa. The complete coding sequence with an open reading frame of 1,665 bp encoded a protein (Est1) consisting of 554 amino acids. The enzyme showed no significant homology to any published feruloyl esterase sequences, but possessed putative conserved domains of the lipase/esterase superfamily. Substrate specificity studies classified the new enzyme as type-A feruloyl esterase, hydrolyzing methyl ferulate, methyl sinapate, and methyl p-coumarate but no methyl caffeate. The enzyme had a pH optimum of 6 and a temperature optimum at 50 °C. Ferulic acid was efficiently released from ferulated saccharides, and the feruloyl esterase exhibited moderate stability in biphasic systems (50 % toluene or tert-butylmethyl ether).     

Identification and Characterization of Lipolytic Enzymes from a Peat-Swamp Forest Soil Metagenome

In this work, a metagenomic library was generated from peat-swamp forest soil obtained from Narathiwat Province, Thailand. From a fosmid library of approximately 15,000 clones, six independent clones were found to possess lipolytic activity at acidic pH. Analysis of pyrosequencing data revealed six ORFs, which exhibited 34–71% protein similarity to known lipases/esterases. A fosmid clone, designated LP8, which demonstrated the highest level of lipolytic activity under acidic conditions and demonstrated extracellular activity, was subsequently subcloned and sequenced. The full-length lipase/esterase gene, estPS2, was identified. Its deduced amino acid was closely related to a lipolytic enzyme of an uncultured bacterium, and contained the highly conserved motif of a hormone-sensitive family IV lipase. The EstPS2 enzyme exhibited highest activity toward p-nitrophenyl butyrate (C₄) at 37 °C at pH 5, indicating that it was an esterase with activity and secretion characteristics suitable for commercial development.     

Characterization of a novel GH2 family α-l-arabinofuranosidase from hyperthermophilic bacterium Thermotoga thermarum

The 2,367-bp ORF of TtAFase from Thermotoga thermarum DSM 5069 encodes a calculated 90-kDa α-l-arabinofuranosidase (TtAFase), which does not belonging to any reported glycosyl hydrolase families α-l-arabinofuranosidases in the database and represents a novel one of glycosyl hydrolase family 2. The purified recombinant TtAFase produced in Escherichia coli BL21 (DE3) had optimum activity at pH 5.5 and at 80 °C. It was stable up to 80 °C and from pH 4.5–8.5. Kinetic experiments at 80 °C with p-nitrophenyl α-l-arabinofuranoside as a substrate gave a K _m of 0.77 mM, V _max of 2.3 μmol mg^?1 min^?1 and k _cat of 4.5 s^?1. The enzyme had no apparent requirement of metal ions for activity, and its activity was significantly inhibited by Cu²⁺ or Zn²⁺.     

Synthesis of 4-nitrophenyl acetate using molecular sieve-immobilized lipase from <Emphasis Type="Italic">Bacillus coagulans</Emphasis>

Extracellular lipase from Bacillus coagulans BTS-3 was immobilized on (3 Å × 1.5 mm) molecular sieve. The molecular sieve showed approximately 68.48% binding efficiency for lipase (specific activity 55 IU mg^?1). The immobilized enzyme achieved approx 90% conversion of acetic acid and 4-nitrophenol (100 mM each) into 4-nitrophenyl acetate in n-heptane at 65°C in 3 h. When alkane of C-chain length other than n-heptane was used as the organic solvent, the conversion of 4-nitrophenol and acetic acid was found to decrease. About 88.6% conversion of the reactants into ester was achieved when reactants were used at molar ratio of 1:1. The immobilized lipase brought about conversion of approximately 58% for esterification of 4-nitrophenol and acetic acid into 4-nitrophenyl acetate at a temperature of 65°C after reuse for 5 cycles.