Pentamidine inhibits mitochondrial intron splicing and translation in Saccharomyces cerevisiae

Pentamidine inhibits in vitro splicing of nuclear group I introns from rRNA genes of some pathogenic fungi and is known to inhibit mitochondrial function in yeast. Here we report that pentamidine inhibits the self-splicing of three group I and two group II introns of yeast mitochondria. Comparison of yeast strains with different configurations of mitochondrial introns (12, 5, 4, or 0 introns) revealed that strains with the most introns were the most sensitive to growth inhibition by pentamidine on glycerol medium. Analysis of blots of RNA from yeast strains grown in raffinose medium in the presence or absence of pentamidine revealed that the splicing of seven group I and two group II introns that have intron reading frames was inhibited by the drug to varying extents. Three introns without reading frames were unaffected by the drug in vivo, and two of these were inhibited in vitro, implying that the drug affects splicing by acting directly on RNA in vitro, but on another target in vivo. Because the most sensitive introns in vivo are the ones whose splicing depends on a maturase encoded by the intron reading frames, we tested pentamidine for effects on mitochondrial translation. We found that the drug inhibits mitochondrial but not cytoplasmic translation in cells at concentrations that inhibit mitochondrial intron splicing. Therefore, pentamidine is a potent and specific inhibitor of mitochondrial translation, and this effect explains most or all of its effects on respiratory growth and on in vivo splicing of mitochondrial introns.     

New PCR-based methods for yeast identification

AIMS: To characterize reference yeast strains and identify indigenous strains isolated from wine fermentations by PCR methods. METHODS AND RESULTS: We compared several PCR techniques for yeast identification. We used oligonucleotide primers that are complementary to (i) intron splice sites, (ii) REP and (iii) ERIC elements to produce PCR fingerprints that display specific patterns between the different yeast species. These three techniques were used to characterize 41 reference yeast strains belonging to 15 different species and to identify 40 indigenous strains isolated from grape must and wine fermentations. Species-specific banding patterns were obtained with the three PCR-techniques with different degrees of intraspecific differentiation depending on the method. By comparing the PCR fingerprints of unknown isolates with those produced by reference strains, we identified yeast strains isolated from an industrial wine fermentation. CONCLUSIONS: All three PCR techniques are rapid, reliable and simple methods of yeast identification. As far as we know, this is the first time that the primers designed for amplifying repetitive elements in bacteria have been successfully used in yeast. SIGNIFICANCE AND IMPACT OF THE STUDY: Industry needs rapid, reliable and simple methods of yeast identification. The proposed PCR techniques will allow to achieve this objective.     

COI基因作为丛赤壳科真菌DNA条形码的测试

以丛赤壳科33种76个菌株为材料,探讨COI基因作为该科DNA条形码的可能性。结果表明,该DNA片段存在较多内含子,为了获取某些种的短片段,需设计许多引物,PCR扩增与测序成功率低,难以达到便捷、快速的物种鉴定的目的。因此,COI不宜作为丛赤壳科的DNA条形码。对已获得的少数片段进行分析表明,该基因对丛赤壳科部分种具有较强的物种鉴别力。     

Construction of novel cytochrome b genes in yeast mitochondria by subtraction or addition of introns

The mitochondrial cob-box gene coding for apocytochrome b in yeast has five introns and six exons or two introns and three exons depending on the wild-type strain considered. Some intron mutations in this gene affect not only its expression but also that of another mitochondrial gene: oxi3. To understand better the function of introns in gene expression, we have constructed a series of new strains that differ only by the presence or absence of one of the five wild-type introns in the cytochrome b gene, the rest of the mitochondrial and nuclear genome remaining unchanged. All constructions result from in vivo recombination events between rho- donor and rho+ recipient mtDNA. The following genes have been constructed: [see text]. Interestingly, all the genes lead to the synthesis of cytochrome b, while only the genes having the intron bI4 allow the expression of oxi3. A nuclear gene, when mutated, can compensate for the absence of the intron bI4.     

Molecular evolution of eukaryotic genomes: hemiascomycetous yeast spliceosomal introns

As part of the exploratory sequencing program Génolevures, visual scrutinisation and bioinformatic tools were used to detect spliceosomal introns in seven hemiascomycetous yeast species. A total of 153 putative novel introns were identified. Introns are rare in yeast nuclear genes (<5% have an intron), mainly located at the 5′ end of ORFs, and not highly conserved in sequence. They all share a clear non-random vocabulary: conserved splice sites and conserved nucleotide contexts around splice sites. Homologues of metazoan snRNAs and putative homologues of SR splicing factors were identified, confirming that the spliceosomal machinery is highly conserved in eukaryotes. Several introns’ features were tested as possible markers for phylogenetic analysis. We found that intron sizes vary widely within each genome, and according to the phylogenetic position of the yeast species. The evolutionary origin of spliceosomal introns was examined by analysing the degree of conservation of intron positions in homologous yeast genes. Most introns appeared to exist in the last common ancestor of present day yeast species, and then to have been differentially lost during speciation. However, in some cases, it is difficult to exclude a possible sliding event affecting a pre-existing intron or a gain of a novel intron. Taken together, our results indicate that the origin of spliceosomal introns is complex within a given genome, and that present day introns may have resulted from a dynamic flux between intron conservation, intron loss and intron gain during the evolution of hemiascomycetous yeasts.     

The dispersal of five group II introns among natural populations of Escherichia coli

Group II introns are self-splicing RNAs that also act as retroelements in bacteria, mitochondria, and chloroplasts. Group II introns were identified in Escherichia coli in 1994, but have not been characterized since, and, instead, other bacterial group II introns have been studied for splicing and mobility properties. Despite their apparent intractability, at least five distinct group II introns exist naturally in E. coli strains. To illuminate their function and learn how the introns have dispersed in their natural host, we have investigated their distribution in the ECOR reference collection. Two introns were cloned and sequenced to complete their partial sequences. Unexpectedly, southern blots showed all ECOR strains to contain fragments and/or full-length copies of group II introns, with some strains containing up to 15 intron copies. One intron, E.c.14, has two natural homing sites in IS629 and IS911 elements, and the intron can be present in one, both, or neither homing site in a given strain. Nearly all strains that contain full-length introns also contain unfilled homing sites, suggesting either that mobility is highly inefficient or that most full-length copies are nonfunctional. The data indicate independent mobility of the introns, as well as mobility via the host DNA elements, and overall, the pattern of intron distribution resembles that of IS elements.     

Different effects of intron nucleotide composition and secondary structure on pre-mRNA splicing in monocot and dicot plants.

We have found previously that the sequences important for recognition of pre-mRNA introns in dicot plants differ from those in the introns of vertebrates and yeast. Neither a conserved branch point nor a polypyrimidine tract, found in yeast and vertebrate introns respectively, are required. Instead, AU-rich sequences, a characteristic feature of dicot plant introns, are essential. Here we show that splicing in protoplasts of maize, a monocot, differs significantly from splicing in a dicot, Nicotiana plumbaginifolia. As in the case of dicots, a conserved branch point and a polypyrimidine tract are not required for intron processing in maize. However, unlike in dicots, AU-rich sequences are not essential, although their presence facilitates splicing if the splice site sequences are not optimal. The lack of an absolute requirement for AU-rich stretches in monocot introns in reflected in the occurrence of GC-rich introns in monocots but not in dicots. We also show that maize protoplasts are able to process a mammalian intron and short introns containing stem--loops, neither of which are spliced in N.plumbaginifolia protoplasts. The ability of maize, but not of N.plumbaginifolia to process stem--loop-containing or GC-rich introns suggests that one of the functions of AU-rich sequences during splicing of dicot plant pre-mRNAs may be to minimize secondary structure within the intron.     

Molecular cloning and genetic mapping of the DNA topoisomerase II gene of Saccharomyces cerevisiae

The structural gene for DNA topoisomerase II from the yeast Saccharomyces cerevisiae has been cloned. The clones were selected from a YEp13 plasmid bank of yeast DNA by complementing a temperature-sensitive mutation (top2-1) in the topoisomerase II gene, TOP2. Chromosomal integrants of the clone were derived by homologous recombination in strains lacking the 2 mu circle plasmid. Genetic analysis of these integrants indicates that we have cloned the TOP2 gene and not an extragenic suppressor. A YEp13-TOP2 hybrid plasmid integrant was used to localize the TOP2 gene to the left arm of chromosome XIV by the 2 mu circle-directed marker loss method. Results from standard meiotic mapping experiments indicate that TOP2 is about 16 centi-Morgans to the centromere proximal side of MET4. Northern blot analysis of TOP2 RNA isolated from a wild-type strain and from an rna2 mutant shows the RNA to be 4.5 kb long in both cases, thus indicating that the TOP2 gene has no large introns.     

RNA splicing in the T-even bacteriophage

Group 1 introns, first demonstrated in the nuclear large rRNA of Tetrahymena thermophila and subsequently in many yeast, fungal mitochondrial, and chloroplast precursor RNAs, are capable of intron excision and exon ligation in vitro, although this process occurs much more rapidly in vivo. The discovery and characterization of a similar intron in the T4 phage thymidylate synthase gene (td) led to the finding of additional group 1 introns in other T4 genes and in genes of the related T2 and T6 phages. Because protein factors are not required in the splicing of group 1 introns in vitro, it has been postulated that the precursor RNA can assume a critical conformation enabling it to undergo site-specific autocatalytic cleavage and ligation (self-splicing). By means of site-directed mutation, it has been shown unequivocally that several sequence elements in the Tetrahymena rRNA intron are involved in the formation of base-paired stem structures that are essential for the self-splicing process. These sequence elements have been demonstrated in other eukaryotic group 1 introns, as well as in the td intron. In this brief review we shall describe the biochemical and structural properties of the td intron in relation to other newly found phage introns. The interesting implications arising from these revelations will also be discussed.     

The yeast Hansenula wingei U3 snoRNA gene contains an intron and its coding sequence co-evolved with the 5' ETS region of the pre-ribosomal RNA.

The 5' external transcribed spacer (ETS) region of the pre-rRNA in Saccharomyces cerevisiae contains a sequence with 10 bp of perfect complementarity to the U3 snoRNA. Base pairing between these sequences has been shown to be required for 18S rRNA synthesis, although interaction over the full 10 bp of complementarity is not required. We have identified the homologous sequence in the 5' ETS from the evolutionarily distant yeast Hansenula wingei; unexpectedly, this shows two sequence changes in the region predicted to base pair to U3. By PCR amplification and direct RNA sequencing, a single type of U3 snoRNA coding sequence was identified in H. wingei. As in the S. cerevisiae U3 snoRNA genes, it is interrupted by an intron with features characteristic of introns spliced in a spliceosome. Consequently, this unusual property is not restricted to the yeast genus Saccharomyces. The introns of the H. wingei and S. cerevisiae U3 genes show strong differences in length and sequence, but are located at the same position in the U3 sequence, immediately upstream of the phylogenetically conserved Box A region. The 3' domains of the H. wingei and S. cerevisiae U3 snoRNAs diverge strongly in primary sequence, but have very similar predicted secondary structures. The 5' domains, expected to play a direct role in pre-ribosomal RNA maturation, are more conserved. The sequence predicted to base pair to the pre-rRNA contains two nucleotide substitutions in H. wingei that restore 10 bp of perfect complementarity to the 5' ETS. This is a strong phylogenetic evidence for the importance of the U3/pre-rRNA interaction.     

The yeast mitochondrial intron aI5 alpha: associated endonuclease activity and in vivo mobility.

By analyzing crosses between yeast strains carrying different combinations of mitochondrial (mt) introns, we have shown that the aI5 alpha intron is mobile in vivo. Furthermore, we have observed that the mobility of intron aI5 alpha is affected by both the nuclear and mt genotypes. We have also detected a restriction endonuclease (ENase) activity that cleaves intronless mt genomes close to the aI5 alpha intron insertion site and thus might be involved in intron mobility. This is further supported by the fact that this ENase activity is only detected in a strain containing the aI5 alpha intron. Furthermore, similar to other ENases encoded by mobile mt introns of yeast, the ENase generates a cut with a four-base 3'-OH overhang. Thus, intron aI5 alpha represents a characteristic member of the family of mobile group-I introns.     

Simultaneous mutation detection of three homoeologous genes in wheat by High Resolution Melting analysis and Mutation Surveyor?

Background  

TILLING (Targeting Induced Local Lesions IN Genomes) is a powerful tool for reverse genetics, combining traditional chemical mutagenesis with high-throughput PCR-based mutation detection to discover induced mutations that alter protein function. The most popular mutation detection method for TILLING is a mismatch cleavage assay using the endonuclease CelI. For this method, locus-specific PCR is essential. Most wheat genes are present as three similar sequences with high homology in exons and low homology in introns. Locus-specific primers can usually be designed in introns. However, it is sometimes difficult to design locus-specific PCR primers in a conserved region with high homology among the three homoeologous genes, or in a gene lacking introns, or if information on introns is not available. Here we describe a mutation detection method which combines High Resolution Melting (HRM) analysis of mixed PCR amplicons containing three homoeologous gene fragments and sequence analysis using Mutation Surveyor^? software, aimed at simultaneous detection of mutations in three homoeologous genes.     

Nucleotide sequence of the Neurospora crassa trp-3 gene encoding tryptophan synthetase and comparison of the trp-3 polypeptide with its homologs in Saccharomyces cerevisiae and Escherichia coli

The complete nucleotide sequence of the Neurospora crassa trp-3 gene-encoding tryptophan synthetase has been determined; we present an analysis of its structure. A comparison of the deduced amino acid sequence of the trp-3 polypeptide with its homologs in Saccharomyces cerevisiae (encoded by the TRP5 gene) and Escherichia coli (encoded by the trpA and trpB genes) shows that the A and B domains (amino acid segments homologous to the trpA and trpB polypeptides, respectively) of the N. crassa and yeast polypeptides are in the same order (NH2-A-B-COOH). This arrangement is the reverse of the gene order characteristic of all prokaryotes that have been examined. N. crassa tryptophan synthetase has strong homology to the yeast TRP5 polypeptide (A domains have 54% identity; B domains have 75% identity), and somewhat weaker homology to the E. coli trpA and trpB polypeptides (A domains have 31% identity; B domains have 50% identity). The two domains of the N. crassa polypeptide are linked by a connector of 54-amino acid residues that has less than 25% identity to the 45-residue connector of the yeast polypeptide, although secondary structure analysis predicts both connectors would be alpha-helical. In contrast to the yeast TRP5 gene, which has no introns, the trp-3 coding region is interrupted by two introns 77 and 71 nucleotides in length. Both introns are located near the 5'-end of the gene and therefore not near the segment encoding the connector.     

Validation of the official control method based on Polymerase Chain Reaction (PCR) for identification of authorised probiotic yeast in animal feed

Council Directive 70/524/EEC regulates the application of probiotic (microorganisms) additives in feeding stuffs. In the present study a method for the differentiation and strain identification of authorised probiotic Saccharomyces cereviseae strains in feeding stuffs by Polymerase Chain Reaction (PCR) was validated. Four different samples of animal feeding stuffs containing yeast at levels between 10(5) to 10(7) CFU/g were examined. Samples were enumerated on chloramphenicol glucose yeast extract agar and colonies were selected from these plates for DNA extraction and subsequent analysis. The PCR method using delta sequence primers produced an 'amplified sequence polymorphism' characteristic for the test strain. Feeds supplemented with one of four probiotic yeast strains each were analysed by seven of nine invited laboratories. All laboratories returned valid results with the exception of one laboratory that had insufficiently separated bands on the gel. The method had a good reproducibility for probiotic yeast isolates from feed of all four authorised probiotic yeast strains (APYS) CBS 493.94, APYS CNCM 1-1079, APYS CNCM 1-1077, APYS NCYC SC47 and of a commercially available yeast reference strain, NCYC 81. The PCR method is to be considered by CEN and ISO as official control method for identification of authorised probiotic Saccharomyces cerevisiae strains from feeding stuffs.     

Deletion of many yeast introns reveals a minority of genes that require splicing for function

Splicing regulates gene expression and contributes to proteomic diversity in higher eukaryotes. However, in yeast only 283 of the 6000 genes contain introns and their impact on cell function is not clear. To assess the contribution of introns to cell function, we initiated large-scale intron deletions in yeast with the ultimate goal of creating an intron-free model eukaryote. We show that about one-third of yeast introns are not essential for growth. Only three intron deletions caused severe growth defects, but normal growth was restored in all cases by expressing the intronless mRNA from a heterologous promoter. Twenty percent of the intron deletions caused minor phenotypes under different growth conditions. Strikingly, the combined deletion of all introns from the 15 cytoskeleton-related genes did not affect growth or strain fitness. Together, our results show that although the presence of introns may optimize gene expression and provide benefit under stress, a majority of introns could be removed with minor consequences on growth under laboratory conditions, supporting the view that many introns could be phased out of Saccharomyces cerevisiae without blocking cell growth.     

The intron of tRNA-TrpCCA is dispensable for growth and translation of Saccharomyces cerevisiae

A part of eukaryotic tRNA genes harbor an intron at one nucleotide 3' to the anticodon, so that removal of the intron is an essential processing step for tRNA maturation. While some tRNA introns have important roles in modification of certain nucleotides, essentiality of the tRNA intron in eukaryotes has not been tested extensively. This is partly because most of the eukaryotic genomes have multiple genes encoding an isoacceptor tRNA. Here, we examined whether the intron of tRNA-Trp(CCA) genes, six copies of which are scattered on the genome of yeast, Saccharomyces cerevisiae, is essential for growth or translation of the yeast in vivo. We devised a procedure to remove all of the tRNA introns from the yeast genome iteratively with marker cassettes containing both positive and negative markers. Using this procedure, we removed all the introns from the six tRNA-Trp(CCA) genes, and found that the intronless strain grew normally and expressed tRNA-Trp(CCA) in an amount similar to that of the wild-type genes. Neither incorporation of (35)S-labeled amino acids into a TCA-insoluble fraction nor the major protein pattern on SDS-PAGE/2D gel were affected by complete removal of the intron, while expression levels of some proteins were marginally affected. Therefore, the tRNA-Trp(CCA) intron is dispensable for growth and bulk translation of the yeast. This raises the possibility that some mechanism other than selective pressure from translational efficiency maintains the tRNA intron on the yeast genome.