Assessment of new 6-Cl-HOBt based coupling reagents for peptide synthesis. Part 2: Racemization studies

Novel Cl-HOBt based coupling reagents have been evaluated forracemization extent in solid-phase peptide synthesis. The resultsshow that all the coupling protocols based on the use of the novel reagents enable incorporation of the racemization prone residue serine with less than 2% racemization. Moreover, serine racemization obtained is less than 0.5% with protocolswhere a pre-activation step is avoided.     

Evaluation of acid‐labile S‐protecting groups to prevent Cys racemization in Fmoc solid‐phase peptide synthesis

Phosphonium and uronium salt‐based reagents enable efficient and effective coupling reactions and are indispensable in peptide chemistry, especially in machine‐assisted SPPS. However, after the activating and coupling steps with these reagents in the presence of tertiary amines, Fmoc derivatives of Cys are known to be considerably racemized during their incorporation. To avoid this side reaction, a coupling method mediated by phosphonium/uronium reagents with a weaker base, such as 2,4,6‐trimethylpyridine, than the ordinarily used DIEA or that by carbodiimide has been recommended. However, these methods are appreciably inferior to the standard protocol applied for SPPS, that is, a 1 min preactivation procedure of coupling with phosphonium or uronium reagents/DIEA in DMF, in terms of coupling efficiency, and also the former method cannot reduce racemization of Cys(Trt) to an acceptable level (<1.0%) even when the preactivation procedure is omitted. Here, the 4,4′‐dimethoxydiphenylmethyl and 4‐methoxybenzyloxymethyl groups were demonstrated to be acid‐labile S‐protecting groups that can suppress racemization of Cys to an acceptable level (<1.0%) when the respective Fmoc derivatives are incorporated via the standard SPPS protocol of phosphonium or uronium reagents with the aid of DIEA in DMF. Furthermore, these protecting groups significantly reduced the rate of racemization compared to the Trt group even in the case of microwave‐assisted SPPS performed at a high temperature. © 2013 The Authors. European Peptide Society published by John Wiley & Sons, Ltd.     

(1H-benzotriazol-1-yloxy)-N,N-dimethylmethaniminium hexachloroantimonate (BOMI), a novel coupling reagent for solution and solid-phase peptide synthesis.

A HOBt-based immonium-type compound,(1H-benzotriazol-1-yloxy)-N,N-dimethyl methaniminium hexachloroantimonate (BOMI), was synthesized and successfully applied to the synthesis of various oligopeptides with good yields. The estimation of racemization and the influence of several reaction parameters such as solvents, bases and temperature were studied by HPLC using a model reaction. It was found that the reactivity of BOMI was much higher than that of HOBt-based phosphonium- and uronium-type coupling reagents. Moreover, its racemization was lower than that of other HOBt-derived coupling reagents. The effectiveness of BOMI was also demonstrated by the synthesis of Leu-enkephalin both in solution and in the solid-phase.     

Effect of tertiary amine on the carbodiimide-mediated peptide synthesis

The effect of tertiary amine (DIEA) on reaction rate and product purity of a carbodiimide/HOBt-mediated peptide synthesis was studied. It was found that very rapid activation can be achieved using carbodiimide/HOBt in non-polar solvents, such as DCM. Although the HOBt is poorly soluble in DCM, the activation proceeds within 2 min, probably forming the HOBt-ester. By such a preactivation followed by a coupling in the presence of DIEA the rate of coupling is comparable with other rapid methods using BOP or TBTU, and no racemization was found in a model coupling (less than 0.1%). For comparison, syntheses of neurotensin by means of different coupling reagents (BOP, TBTU, OPfp-esters) and the DIEA-catalyzed coupling after carbodiimide/HOBt-activation under comparable conditions have shown that these procedures are of the same value in view of coupling efficiency and product purity.     

Unexpected racemization of proline or hydroxy-proline phenacyl ester during coupling reactions with Boc-amino acids.

When L-proline or O-benzyl-trans-4-hydroxy-L-proline phenacyl ester was coupled with Boc-amino acids in dimethylformamide using water-soluble carbodiimide (WSCI) in the presence of anhydrous 1-hydroxybenzotriazole (HOBt) as coupling reagents, extensive racemization was observed at the C alpha of the proline or hydroxy-proline residue. The extent of racemization was measured by HPLC after the coupling with Boc-L-Leu-OH in the presence or absence of HOBt. The extent of racemization increased when HOBt was added to the reaction mixture, but greatly decreased when it was not, indicating that HOBt was needed for inducing racemization. Almost no racemization was observed when the coupling reaction was carried out by the mixed anhydride procedure in tetrahydrofuran or by the carbodiimide method in dichloromethane without using HOBt. In the case of coupling reactions with ordinary L-amino acid phenacyl esters, no racemization was observed. Examination of some model systems yielded sufficient evidence to prove that HOBt is an efficient catalyst for racemizing proline or hydroxy-proline phenacyl ester not only in the stage of cyclic intermediate formation but also in the opening of the ring structure. Thus, the racemization reaction was found to be closely related to the formation of the cyclic carbinol-amine derivative.     

The influence of extrusion on loss and racemization of amino acids

Summary. The influence of the operation conditions (temperature and residence time) of a thermic treatment on the total amount (free and protein-bound) of amino acid enantiomers of dry fullfat soya was investigated. Total amino acid content was determined using conventional ion-exchange amino acid analysis of total hydrolysates and chiral amino acid analysis was performed by HPLC after precolumn derivatization with o-phthaldialdehyde and 1-thio-β-D-glucose tetraacetate. Contrary to corn that was investigated previously, notable racemization was detected even at lower temperatures. At 140 °C the ratio of the D-enantiomer was 0.87% for glutamic acid, 2.81% for serine, and 1.92% for phenylalanine; at 220 °C the ratios of the D-enantiomer of the above amino acids were 1.43, 4.61, and 4.68%, respectively. The concentration of several L-amino acids decreased. At 220 °C there was 10% less L-glutamic acid, 17% less L-serine, 5% less L-phenylalanine, 6.6% less L-aspartic, acid and 21% less L-lysine than in the control; their loss can be assigned to different degrees of L – D conversion. While nearly complete transformation of L-phenylalanine can be attributed to racemization, the main cause of the loss of L-lysine is not racemization. The treatments in the same order of magnitude resulted in the formation of more D-amino acids and greater extent of racemization of amino acids in fullfat soya than that of maize. Authors’ address: J. Csapó, Faculty of Animal Science, Institute of Chemistry, University of Kaposvár, Guba S. u. 40., H-7400 Kaposvár, Hungary     

Further applications of classical amide coupling reagents: Microwave‐assisted esterification on solid phase

Ester linkage (s) is a key chemical connector in organic chemistry, including natural products, peptides, and synthetic polymers. We herein describe a straightforward method for the efficient formation of ester linkage (s) on solid‐phase. This method simply involves the use of amide coupling reagents under microwave irradiation. The robustness of this method relies on the use of classical solid‐phase coupling reagents, heating by microwave irradiation, and a short time period, which results in high yields and the minimization of racemization.     

Cu(OBt)2 and Cu(OAt)2, copper(II)-based racemization suppressors ready for use in fully automated solid-phase peptide synthesis.

The complexes Cu(OBt)2 and Cu(OAt)2, which are derived from copper(II) and HOBt and HOAt, respectively, are shown to be more effective in suppressing racemization during solid-phase peptide synthesis (SPPS) than are those compounds currently being used for this purpose. These compounds can readily be used in conjunction with the commonly applied coupling reagents in fully automated systems for solid-phase peptide chemistry.     

Racemization of alpha-melanotropin

Racemization of the amino acid residues of alpha-melanotropin was measured after exposure of the peptide to alkali for various lengths of time. Rates of racemization were then compared to the rate of transformation by alkali of alpha-melanotropin into a hormone with prolonged melanotropic activity. When in vitro prolongation became maximal, serine, methionine, histidine, phenylalanine and arginine were racemized 50-70%, glutamic acid, tyrosine and tryptophan 30-40% and lysine, proline and valine 10% or less. Racemization of a particular amino acid residue in alpha-melanotropin could not be associated with induction of prolongation of activity. Rather, partial racemization at multiple sites in the molecule seems almost as effective as extensive or total racemization of a single residue in producing a hormone with prolonged biological effects.     

Effect of copper(II) chloride on suppression of racemization in peptide synthesis by the carbodiimide method.

Copper(II) chloride was found to be an extremely efficient racemization-suppressing additive in the DCC method as compared with the hitherto known ones, by employing the model coupling Z-Gly-L-Val-OH + H-L-Val-OMe in DMF. Although some other copper salts also had a profound effect, copper(II) chloride was the best from the viewpoint of both racemization suppression and coupling efficiency. The effectiveness of copper(II) chloride was further confirmed by employing the EDC-mediated couplings of Z-Gly-containing dipeptides with amino acid esters or dipeptide esters, and those of Z-L-Ala (or L-Val)-L-Val-OH with amino acid esters or dipeptide esters. In almost all the cases studied, no detectable amount (less than 0.1%) of epimer was observed by the HPLC analysis in the presence of copper(II) chloride. This was also the case even with an extremely stringent coupling system Z-L-Pro-L-Val-OH + H-L-Pro-OMe. With reference to the mechanism of racemization suppression, it was found that copper(II) chloride has a strong ability to suppress the racemization of the 5(4H)-oxazolone, which may be formed from an activated carboxyl component during the coupling.     

BOP reagent for the coupling of pGlu and Boc-His(Tos) in solid phase peptide synthesis

The model peptide TRH was successfully synthesized using benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP reagent). The coupling reactions were carried out in N,N-dimethylformamide or N-methylpyrrolidone. These solvents allowed the incorporation of the N-terminal pyroglutamic acid residue into the peptide chain, without using the derivative bearing the N-benzyloxycarbonyl group, which acts as a solubility promoter. A comparative racemization study showed that Boc-His(Tos) can be coupled by means of BOP reagent with less racemization than with DCC when the amount of diisopropylethylamine (DIEA) is kept minimal (same ratio of equivalents as for Boc-His(Tos), i.e. 3 equiv.). However, with the use of a larger amount of DIEA in the coupling mixture (9 equiv.), approximately 3% of epimer was found in the crude product. Our study showed that even under low DIEA conditions, the rate of coupling of the residues with BOP remained comparable to that observed with DCC.     

Racemization studies in peptide synthesis through the separation of protected epimeric peptides by reversed-phase high performance liquid chromatography.

Separation of protected epimeric peptides, Z-Gly-Xaa-Xbb-OMe (where Xaa and Xbb = chiral amino acid residues), by reversed-phase HPLC was utilized for studying racemization in peptide synthesis. Thus, the following factors which might affect the extent of racemization during the coupling by the carbodiimide method were investigated: the combination of amino acid residues to be coupled, coexisting tertiary amine salts, and the relative configuration of the amino acid residues. The following points were revealed: the combination of bulky residues at the coupling site results in extensive racemization in a polar solvent such as DMF, the amine hydrochlorides cause less racemization than the p-toluene-sulfonates in DMF, and the influence of relative configuration differs depending on the solvent and the individuality of the amino components. Furthermore, the racemization-suppressing effect of some additives in the carbodiimide method was reevaluated by employing the same procedure.     

Mouse brain serine racemase catalyzes specific elimination of L-serine to pyruvate

D-Serine was previously identified in mammalian brain and was shown to be a co-agonist at the 'glycine' site of the N-methyl-D-aspartate (NMDA)-type receptors. Racemization of serine is catalyzed by serine racemase, a pyridoxal 5'-phosphate-dependent enzyme expressed mainly in brain and liver. NMDA receptor overactivation has been implicated in a number of pathological conditions and inhibitors of serine racemase are thus potentially interesting targets for therapy. We expressed recombinant mouse serine racemase in insect cells and purified it to near homogeneity. The enzyme is a non-covalent homodimer in solution and requires divalent cations Mg(2+), Ca(2+) or Mn(2+) for activity but not for dimerization. In addition to the racemization it also catalyzes specific elimination of L-Ser to pyruvate. D-Serine is eliminated much less efficiently. Both L-serine racemization and elimination activities of serine racemase are of comparable magnitude, display alkaline pH optimum and are negligible below pH 6.5.     

Racemization studies in peptide synthesis using high-pressure liquid chromatography

We have synthesized the dipeptides benzoyl-l-phenylalanyl-l-alanyl benzyl ester and benzoyl-l-phenylalanyl-l-alanyl methyl ester by both the solid-phase and solution coupling methods. A variety of coupling reagents and solvents was employed. Each coupling reaction was analyzed by high-pressure liquid chromatography for extent of racemization. Baseline separations were achieved which allowed the direct, rapid, and reproducible determination of dipeptide diastereomers. Our successes in the separation of dipeptide diastereomers indicate the future value of applying high-pressure liquid chromatography to the separation of larger peptide diastereomers.     

In situ neutralization in Boc-chemistry solid phase peptide synthesis. Rapid, high yield assembly of difficult sequences.

Simple, effective protocols have been developed for manual and machine-assisted Boc-chemistry solid phase peptide synthesis on polystyrene resins. These use in situ neutralization [i.e. neutralization simultaneous with coupling], high concentrations (> 0.2 M) of Boc-amino acid-OBt esters plus base for rapid coupling, 100% TFA for rapid Boc group removal, and a single short (30 s) DMF flow wash between deprotection/coupling and between coupling/deprotection. Single 10 min coupling times were used throughout. Overall cycle times were 15 min for manual and 19 min for machine-assisted synthesis (75 residues per day). No racemization was detected in the base-catalyzed coupling step. Several side reactions were studied, and eliminated. These included: pyrrolidonecarboxylic acid formation from Gln in hot TFA-DMF; chain-termination by reaction with excess HBTU; and, chain termination by acetylation (from HOAc in commercial Boc-amino acids). The in situ neutralization protocols gave a significant increase in the efficiency of chain assembly, especially for "difficult" sequences arising from sequence-dependent peptide chain aggregation in standard (neutralization prior to coupling) Boc-chemistry SPPS protocols or in Fmoc-chemistry SPPS. Reported syntheses include HIV-1 protease(1-50,Cys.amide), HIV-1 protease(53-99), and the full length HIV-1 protease(1-99).     

Tantalum pentachloride as a coupling agent for stereohindered amide bond formation

We have previously reported that tantalum carboxylates show high reactivity toward primary amines to give primary amides. We report herein that tantalum pentachloride, in contrast with the behavior of standard coupling reagents, mediates the couplings of secondary amines and the couplings of very hindered carboxylates. Such coupling reactions are particularly difficult to achieve, when using chiral carboxylates (including N-protected amino acids), without a significant degree of accompanying racemization. Racemization levels with the present systems are found to be very low in comparison with those obtained using a standard amide/peptide coupling system (DCC/HOBt).     

DEPBT as an efficient coupling reagent for amide bond formation with remarkable resistance to racemization

3-(Diethoxyphosphoryloxy)-1, 2, 3-benzotriazin-4(3H)-one (DEPBT) is an effective coupling reagent for synthesis of linear and cyclic peptides by both solution and solid-phase peptide synthesis. DEPBT mediates amide bond formation with remarkable resistance to racemization. When DEPBT is used as a coupling reagent, it is not necessary to protect the hydroxy group of the amino component (such as tyrosine, serine, and threonine) and the imidazole group in the case of histidine. The high efficiency of DEPBT and its utility have been demonstrated in the syntheses of complex natural products such as ramoplanin A2, ramoplanose aglycon, ustiloxin, and teicoplanin aglycon.     

Cyclization studies with tetra- and pentapeptide sequences corresponding to beta-casomorphins

The tetrapeptide Boc-D-Orn-Phe-D-Pro-Gly-OH and the pentapeptide sequence Boc-Tyr(tBu)-D-Orn-Phe-D-Pro-Gly-OH were used to study the influence of different coupling reagents on the yield and purity of these model peptides. The simple structure prevented racemization and cyclodimerization and facilitated the ring formation. The most favorable effects on yield and purity were obtained in both reactions using diphenyl-phosphoryl azide (DPPA) and norborn-5-ene-2,3-dicarboximidodiphenylphosphate (NDPP), while the cyclizations with the powerful activating reagents benzotriazol-1-yl-oxy-tris(dimethylamino)-phosphonium hexafluorophosphate (BOP) and 2-(1-H-benzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate (HBTU) with the exception of the cyclopentapeptide reaction with HBTU/4-dimethylaminopyridine gave unsatisfactory results.     

Racemization in the synthesis of polytripeptide models of a collagen.

Racemization in the synthesis of tripeptide intermediates and their polymers was investigated, using L -amino acid oxidase. Stepwise investigation of peptide intermediates showed no racemization during peptide coupling steps or deprotection of benzyl esters by hydrogenolysis. Saponification of one of the methyl esters produced some racemization. Preparation of active esters from N-protected tripeptide acids containing optically active C-terminal amino acid, with one exception, produced racemization. The fractionated polymers were found to contain less racemized amino acids than the crude products or starting monomeric tripeptides, indicating that the racemized sequences gave rise to lower molecular-weight oligomers. The sequences investigated were -Pro-Pro-Ala-, -Ala-Pro-Pro-, -Val-Pro-Pro-, -Pro-Pro-Leu-, -Pro-Gly-Leu-, -Pro-Gly-Phe-, -Pro-Gly-Val-, -Gly-Val-Pro-, -Phe-Pro-Gly-, -Leu-Pro-Gly-, and Ile-Pro-Gly-.     

Semisynthesis of linear gramicidins using diphenyl phosphorazidate (DPPA)

Sequential HPLC analysis has been used to optimize a synthetic scheme for the preparation of semisynthetic position 1 analogues of the channel-forming pentadecapeptide, gramicidin A. Diphenyl phosphorazidate (DPPA) was more efficient than dicyclohexylcarbodiimide (DCC) for the coupling of N-formyl amino acids to des(formyl-valyl) gramicidin A. The DPPA coupling proceeds rapidly, and with high yield, at 0 degree. The absence of significant (less than 0.1%) racemization is demonstrated by the lack of electrophysiologically active formyl-L-valine gramicidin A in preparations of formyl-D-valine gramicidin A. This scheme has proved useful for the preparation of microgram to gram amounts of position-1-substituted gramicidin analogues suitable for crystallography and electrophysiology. Details of the techniques for the preparation of these highly purified analogues are discussed.