The Giardia intestinalis filamentous cyst wall contains a novel beta(1-3)-N-acetyl-D-galactosamine polymer: a structural and conformational study

Assembly of a protective cyst wall by Giardia is essential for the survival of the parasite outside the host intestine and for transmission among susceptible hosts. The structure of the G. intestinalis filamentous cyst wall was studied by chemical methods, mass spectrometry, and (1)H nuclear magnetic resonance spectroscopy. Isolated cyst wall material contains carbohydrate and protein in a ratio of 3:2 (w/w), and the carbohydrate moiety is composed of a beta(1-3)-N-acetyl-D-galactopyranosamine homopolymer. Conformational analysis by molecular dynamics and persistence length calculations of GalNAc oligomers in solution demonstrated a flexible structure consisting of left- and right-handed helical elements. It is most likely that in the solid state, the polysaccharide forms ordered helices or possibly multiple helical structures having strong interchain interactions. The highly insoluble nature of the Giardia cyst wall must be due to these strong interchain interactions and, probably, a strong association between the carbohydrate and the protein moiety.     

Synthesis, structure and properties of 1,19-disubstituted tetradehydrocorrin cobalt complexes

1,19-Disubstituted tetradehydrocorrins have a ring structure that is closely related to the corrin ring found in vitamin B12. We herein report the isolation and full characterization of a Co(I)-TDHC species and X-ray crystal structures and full characterization of related Co(II) and Co(III) corrins as models for vitamin B12 complexes.     

Structure and properties of a bacterial polysaccharide named Fucogel

The chemical structure of a polysaccharide named Fucogel was characterized and the position of acetylation was identified by NMR. A conformational analysis was performed on this 3-sugar repeating unit. From this, the persistence length, characterizing the stiffness of the polysaccharide, was determined and the role of the presence of acetyl group, reducing the stiffness, was pointed out. The helical conformations were also predicted, one of these being in agreement with X-ray data obtained on a similar polysaccharide. Experimental characterization of the native and deacetylated polysaccharides was developed. SEC experiments allowed us to determine the molar mass and the persistence length on the deacetylated polysaccharide. The value is in good agreement with that predicted from the molecular modeling. Microcalorimetry, rheology, and fluorescence spectroscopy demonstrated respectively that no helical conformation exists in solution but that loose interchain interactions due to the acetyl substituents exist in dilute solutions.     

Native structural propensity in cellular retinoic acid-binding protein I 64-88: the role of locally encoded structure in the folding of a beta-barrel protein

A central question in protein folding is the relative importance of locally encoded structure and cooperative interactions among residues distant in sequence. We have been exploring this question in a predominantly β-sheet protein, since β-structure formation clearly relies on both local and global sequence information. We present evidence that a 24-residue peptide corresponding to two linked hairpins of cellular retinoic acid-binding protein I (CRABP I) adopts significant native structure in aqueous solution. Prior work from our laboratory showed that the two turns contained in this fragment (turns III and IV) had the highest tendency of any of the eight turns in this anti-parallel β-barrel to fold into native turns. In addition, the primary sequence of these two turns is well conserved throughout the structural family to which CRABP I belongs, and residues in the turns and their associated hairpins participate in a network of conserved long-range interactions. We propose that the strong local-sequence biases within the chain segment comprising turns III and IV favor longer-range interactions that are crucial to the folding and native-state stability of CRABP I, and may play a similar role in related intracellular lipid-binding proteins (iLBPs).     

Mean geometry of the thiopeptide unit and conformational features of dithiopeptides and polythiopeptides

The mean geometry of the thiopeptide [Ca-N-C(=S)-Ca] unit has been derived from an analysis of X-ray crystal structure data, as well as MM2 and Gaussian 80/82 calculations. The conformational flexibilities of dithiopeptides with glycl- and alanyl-side chains have been investigated by molecular mechanics. Minimum energy conformations were examined using interactive computer graphics molecular modeling techniques. Alanyl-dithiopeptide substitution within an oligopeptide results in considerable restriction of conformational freedom whereas the effect is minimal for glycyl-dithiopeptide substitution. Polyglycyl-thiopeptide adopts a left-handed three or fourfold or right-handed threefold helical structure with favorable interchain C = S...H-N hydrogen bond interactions. A poly-L-alanyl-thiopeptide prefers a left-handed threefold poly-L-proline-like helical structure.     

Crystal structure of a designed, thermostable, heterotrimeric coiled coil

Electrostatic interactions are often critical for determining the specificity of protein-protein complexes. To study the role of electrostatic interactions for assembly of helical bundles, we previously designed a thermostable, heterotrimeric coiled coil, ABC, in which charged residues were employed to drive preferential association of three distinct, 34-residue helices. To investigate the basis for heterotrimer specificity, we have used multiwavelength anomalous diffraction (MAD) analysis to determine the 1.8 A resolution crystal structure of ABC. The structure shows that ABC forms a heterotrimeric coiled coil with the intended arrangement of parallel chains. Over half of the ion pairs engineered to restrict helix associations were apparent in the experimental electron density map. As seen in other trimeric coiled coils, ABC displays acute knobs-into-holes packing and a buried anion coordinated by core polar amino acids. These interactions validate the design strategy and illustrate how packing and polar contacts determine structural uniqueness.     

The global conformation of the hammerhead ribozyme determined using residual dipolar couplings

The global structure of the hammerhead ribozyme was determined in the absence of Mg(2+) by solution NMR experiments. The hammerhead ribozyme motif forms a branched structure consisting of three helical stems connected to a catalytic core. The (1)H-(15)N and (1)H-(13)C residual dipolar couplings were measured in a set of differentially (15)N/(13)C-labeled ribozymes complexed with an unlabeled noncleavable substrate. The residual dipolar couplings provide orientation information on both the local and the global structure of the molecule. Analysis of the residual dipolar couplings demonstrated that the local structure of the three helical stems in solution is well modeled by an A-form conformation. However, the global structure of the hammerhead in solution in the absence of Mg(2+) is not consistent with the Y-shaped conformation observed in crystal structures of the hammerhead. The residual dipolar couplings for the helical stems were combined with standard NOE and J coupling constant NMR data from the catalytic core. The NOE data show formation of sheared G-A base pairs in domain 2. These NMR data were used to determine the global orientation of the three helical stems in the hammerhead. The hammerhead forms a rather extended structure under these conditions with a large angle between stems I and II ( approximately 153 degrees ), a smaller angle between stems II and III ( approximately 100 degrees ), and the smallest angle between stems I and III ( approximately 77 degrees ). The residual dipolar coupling data also contain information on the dynamics of the molecule and were used here to provide qualitative information on the flexibility of the helical domains in the hammerhead ribozyme-substrate complex.     

The Crystal-Solution Problem of Sperm Whale Myoglobin

The central question to be discussed in this paper is whether the structure established for sperm whale myoglobin in the crystalline state is the same as that of the protein in solution. As judged by its ultraviolet optical rotatory dispersion, the helical content of metmyoglobin in solution does not differ from that in the crystal, 77 per cent. Although an uncertainty of about ±5 per cent must attach to this result, it excludes many alternative arrangements of the polypeptide chain. The folding of the chain may be further restricted to the basic form seen in the crystal if the dimensions of the molecule in solution and the interactions of specific chemical groups are taken into account. Since the rotatory dispersion of metmyoglobin is constant with respect to ionic strength, and since the dispersions of reduced and oxymyoglobin reveal no change in helical content upon their formation from metmyoglobin, one may infer that the structure of the protein is largely maintained both as it dissolves and during its reversible combination with oxygen. The crystallographic model of myoglobin thus offers a structural basis for attempting to explain its physiological function in solution. The relevance of this conclusion to the crystal-solution problems presented by other species of protein is then best seen in the light of common factors that govern the equilibrium of all proteins between crystal and solution.     

The coiled-coil trigger site of the rod domain of cortexillin I unveils a distinct network of interhelical and intrahelical salt bridges

BACKGROUND: The parallel two-stranded alpha-helical coiled coil is the most frequently encountered subunit-oligomerization motif in proteins. The simplicity and regularity of this motif have made it an attractive system to explore some of the fundamental principles of protein folding and stability and to test the principles of de novo design. RESULTS: The X-ray crystal structure of the 18-heptad-repeat alpha-helical coiled-coil domain of the actin-bundling protein cortexillin I from Dictyostelium discoideum is a tightly packed parallel two-stranded alpha-helical coiled coil. It harbors a distinct 14-residue sequence motif that is essential for coiled-coil formation, and is a prerequisite for the assembly of cortexillin I. The atomic structure reveals novel types of ionic coiled-coil interactions. In particular, the structure shows that a characteristic interhelical and intrahelical salt-bridge pattern, in combination with the hydrophobic interactions occurring at the dimer interface, is the key structural feature of its coiled-coil trigger site. CONCLUSIONS: The knowledge gained from the structure could be used in the de novo design of alpha-helical coiled coils for applications such as two-stage drug targeting and delivery systems, and in the design of coiled coils as templates for combinatorial helical libraries in drug discovery and as synthetic carrier molecules.     

Crystal structure of human XLF/Cernunnos reveals unexpected differences from XRCC4 with implications for NHEJ

The recently characterised 299-residue human XLF/Cernunnos protein plays a crucial role in DNA repair by non-homologous end joining (NHEJ) and interacts with the XRCC4-DNA Ligase IV complex. Here, we report the crystal structure of the XLF (1-233) homodimer at 2.3 A resolution, confirming the predicted structural similarity to XRCC4. The XLF coiled-coil, however, is shorter than that of XRCC4 and undergoes an unexpected reverse in direction giving rise to a short distorted four helical bundle and a C-terminal helical structure wedged between the coiled-coil and head domain. The existence of a dimer as the major species is confirmed by size-exclusion chromatography, analytical ultracentrifugation, small-angle X-ray scattering and other biophysical methods. We show that the XLF structure is not easily compatible with a proposed XRCC4:XLF heterodimer. However, we demonstrate interactions between dimers of XLF and XRCC4 by surface plasmon resonance and analyse these in terms of surface properties, amino-acid conservation and mutations in immunodeficient patients. Our data are most consistent with head-to-head interactions in a 2:2:1 XRCC4:XLF:Ligase IV complex.     

Structural determinants in the group III truncated hemoglobin from Campylobacter jejuni

Truncated hemoglobins (trHbs) constitute a distinct lineage in the globin superfamily, distantly related in size and fold to myoglobin and monomeric hemoglobins. Their phylogenetic analyses revealed that three groups (I, II, and III) compose the trHb family. Group I and II trHbs adopt a simplified globin fold, essentially composed of a 2-on-2 alpha-helical sandwich, wrapped around the heme group. So far no structural data have been reported for group III trHbs. Here we report the three-dimensional structure of the group III trHbP from the eubacterium Campylobacter jejuni. The 2.15-A resolution crystal structure of C. jejuni trHbP (cyano-met form) shows that the 2-on-2 trHb fold is substantially conserved in the trHb group III, despite the absence of the Gly-based sequence motifs that were considered necessary for the attainment of the trHb specific fold. The heme crevice presents important structural modifications in the C-E region and in the FG helical hinge, with novel surface clefts at the proximal heme site. Contrary to what has been observed for group I and II trHbs, no protein matrix tunnel/cavity system is evident in C. jejuni trHbP. A gating movement of His(E7) side chain (found in two alternate conformations in the crystal structure) may be instrumental for ligand entry to the heme distal site. Sequence conservation allows extrapolating part of the structural results here reported to the whole trHb group III.     

Solution structure and thermodynamics of a divalent metal ion binding site in an RNA pseudoknot.

Identification and characterization of a metal ion binding site in an RNA pseudoknot was accomplished using cobalt (III) hexammine, Co(NH3)63+, as a probe for magnesium (II) hexahydrate, Mg(H2O)62+, in nuclear magnetic resonance (NMR) structural studies. The pseudoknot causes efficient -1 ribosomal frameshifting in mouse mammary tumor virus. Divalent metal ions, such as Mg2+, are critical for RNA structure and function; Mg2+preferentially stabilizes the pseudoknot relative to its constituent hairpins. The use of Co(NH3)63+as a substitute for Mg2+was investigated by ultraviolet absorbance melting curves, NMR titrations of the imino protons, and analysis of NMR spectra in the presence of Mg2+or Co (NH3)63+. The structure of the pseudoknot-Co(NH3)63+complex reveals an ion-binding pocket formed by a short, two-nucleotide loop and the major groove of a stem. Co(NH3)63+stabilizes the sharp loop-to-stem turn and reduces the electrostatic repulsion of the phosphates in three proximal strands. Hydrogen bonds are identified between the Co(NH3)63+protons and non-bridging phosphate oxygen atoms, 2' hydroxyl groups, and nitrogen and oxygen acceptors on the bases. The binding site is significantly different from that previously characterized in the major groove surface of tandem G.U base-pairs, but is similar to those observed in crystal structures of a fragment of the 5 S rRNA and the P5c helix of the Tetrahymena thermophila group I intron. Changes in chemical shifts occurred at the same pseudoknot protons on addition of Mg2+as on addition of Co(NH3)63+, indicating that both ions bind at the same site. Ion binding dissociation constants of approximately 0.6 mM and 5 mM (in 200 mM Na+and a temperature of 15 degrees C) were obtained for Co(NH3)63+and Mg2+, respectively, from the change in chemical shift as a function of metal ion concentration. An extensive array of non-sequence-specific hydrogen bond acceptors coupled with conserved structural elements within the binding pocket suggest a general mode of divalent metal ion stabilization of this type of frameshifter pseudoknot. These results provide new thermodynamic and structural insights into the role divalent metal ions play in stabilizing RNA tertiary structural motifs such as pseudoknots.     

Solution NMR studies of antiamoebin,a membrane channel-forming polypeptide

Antiamoebin I is a membrane-active peptaibol produced by fungi of the species Emericellopsis which is capable of forming ion channels in membranes. Previous structure determinations by x-ray crystallography have shown the molecule is mostly helical, with a deep bend in the center of the polypeptide, and that the backbone structure is independent of the solvent used for crystallization. In this study, the solution structure of antiamoebin was determined by NMR spectroscopy in methanol, a solvent from which one of the crystal structures was determined. The ensemble of structures produced exhibit a right-handed helical C terminus and a left-handed helical conformation toward the N-terminus, in contrast to the completely right-handed helices found in the crystal structures. The NMR results also suggest that a "hinge" region exists, which gives flexibility to the polypeptide in the central region, and which could have functional implications for the membrane insertion process. A model for the membrane insertion and assembly process is proposed based on the antiamoebin solution and crystal structures, and is contrasted with the assembly and insertion mechanism proposed for other ion channel-forming polypeptides.     

Hemoprotein models based on a covalent helix-heme-helix sandwich. 3. Coordination properties, reactivity and catalytic application of Fe(III)- and Fe(II)-mimochrome I

 The coordination state of Fe(III)- and Fe(II)-mimochrome I, a covalent peptide-deuteroheme sandwich involving two nonapeptides bearing a histidine residue in a central position, was studied by UV-visible, EPR, and resonance Raman spectroscopy. The ferric and ferrous states of this new iron species mainly exist, at pH 7, in a low-spin hexacoordinate form with two axial histidine ligands coming from the peptide chains. A minor amount of high-spin form for the ferric state is also present at pH 7. However, it is mainly high-spin at pH 2 or in DMSO. Fe(II)-mimochrome I binds CO with an affinity comparable to that of myoglobin and hemoglobin. Fe(III)-mimochrome I reacts with alkylhydroxylamine and arylhydrazines, leading to the corresponding Fe(II)-nitrosoalkyl and Fe(III)-σ-aryl complexes, respectively. These reactions were greatly dependent on the solvent used and on the pH, and were much slower than the corresponding reactions performed by deuterohemin in the presence of excess imidazole. All these results indicate that the reactivity of iron-mimochrome I is controlled by the binding of the peptide chains to the iron. The reactivity shown by this complex at neutral pH is intermediate between that observed for iron porphyrins in the presence of excess imidazole and that of hemoproteins characterized by a strong bis-histidine axial coordination, such as cytochrome b ₅. Fe(III)-mimochrome I is able to catalyze styrene epoxidation by using a [Fe(III)-mimochrome I]/[H₂O₂]/[stryrene] ratio of 1 : 10 : 2000 in phosphate buffer solution (pH 7.2) containing 2% CTAB both under strictly anaerobic conditions and in the presence of oxygen, at 0  °C. Received: 26 May 1998 / Accepted: 20 August 1998     

Dioxygen activation at non-heme diiron centers: oxidation of a proximal residue in the I100W variant of toluene/o-xylene monooxygenase hydroxylase

At its carboxylate-bridged diiron active site, the hydroxylase component of toluene/o-xylene monooxygenase activates dioxygen for subsequent arene hydroxylation. In an I100W variant of this enzyme, we characterized the formation and decay of two species formed by addition of dioxygen to the reduced, diiron(II) state by rapid-freeze quench (RFQ) EPR, M?ssbauer, and ENDOR spectroscopy. The dependence of the formation and decay rates of this mixed-valent transient on pH and the presence of phenol, propylene, or acetylene was investigated by double-mixing stopped-flow optical spectroscopy. Modification of the alpha-subunit of the hydroxylase after reaction of the reduced protein with dioxygen-saturated buffer was investigated by tryptic digestion coupled mass spectrometry. From these investigations, we conclude that (i) a diiron(III,IV)-W* transient, kinetically linked to a preceding diiron(III) intermediate, arises from the one-electron oxidation of W100, (ii) the tryptophan radical is deprotonated, (iii) rapid exchange of either a terminal water or hydroxide ion with water occurs at the ferric ion in the diiron(III,IV) cluster, and (iv) the diiron(III,IV) core and W* decay to the diiron(III) product by a common mechanism. No transient radical was observed by stopped-flow optical spectroscopy for reactions of the reduced hydroxylase variants I100Y, L208F, and F205W with dioxygen. The absence of such species, and the deprotonated state of the tryptophanyl radical in the diiron(III,IV)-W* transient, allow for a conservative estimate of the reduction potential of the diiron(III) intermediate as lying between 1.1 and 1.3 V. We also describe the X-ray crystal structure of the I100W variant of ToMOH.     

Isolation and characterization of four type 2 ribosome inactivating pulchellin isoforms from Abrus pulchellus seeds

Abrus pulchellus seeds contain at least seven closely related and highly toxic type 2 ribosome-inactivating pulchellins, each consisting of a toxic A-chain linked to a sugar binding B-chain. In the present study, four pulchellin isoforms (termed P I, P II, P III and P IV) were isolated by affinity, ion exchange and chromatofocusing chromatographies, and investigated with respect to toxicity and sugar binding specificity. Half maximal inhibitory concentration and median lethal dose values indicate that P I and P II have similar toxicities and that both are more toxic to cultured HeLa cells and mice than P III and P IV. Interestingly, the secondary structural characteristics and sugar binding properties of the respective pairs of isoforms correlate well with the two toxicity levels, in that P I/P II and P III/P IV form two specific subgroups. From the deduced amino acids sequences of the four isoforms, it is clear that the highest similarity within each subgroup is found to occur within domain 2 of the B-chains, suggesting that the disparity in toxicity levels might be attributed to subtle differences in B-chain-mediated cell surface interactions that precede and determine toxin uptake pathways.     

Structural metals in the group I intron: a ribozyme with a multiple metal ion core

Metal ions play key roles in the folding and function for many structured RNAs, including group I introns. We determined the X-ray crystal structure of the Azoarcus bacterial group I intron in complex with its 5' and 3' exons. In addition to 222 nucleotides of RNA, the model includes 18 Mg(2+) and K(+) ions. Five of the metals bind within 12 A of the scissile phosphate and coordinate the majority of the oxygen atoms biochemically implicated in conserved metal-RNA interactions. The metals are buried deep within the structure and form a multiple metal ion core that is critical to group I intron structure and function. Eight metal ions bind in other conserved regions of the intron structure, and the remaining five interact with peripheral structural elements. Each of the 18 metals mediates tertiary interactions, facilitates local bends in the sugar-phosphate backbone or binds in the major groove of helices. The group I intron has a rich history of biochemical efforts aimed to identify RNA-metal ion interactions. The structural data are correlated to the biochemical results to further understand the role of metal ions in group I intron structure and function.     

The crystal structure of samarosporin I at atomic resolution

The atomic resolution structures of samarosporin I have been determined at 100 and 293 K. This is the first crystal structure of a natural 15‐residue peptaibol. The amino acid sequence in samarosporin I is identical to emerimicin IV and stilbellin I. Samarosporin is a peptide antibiotic produced by the ascomycetous fungus Samarospora rostrup and belongs to peptaibol subfamily 2. The structures at both temperatures are very similar to each other adopting mainly a 3₁₀‐helical and a minor fraction of α‐helical conformation. The helices are significantly bent and packed in an antiparallel fashion in the centered monoclinic lattice leaving among them an approximately 10‐Å channel extending along the crystallographic twofold axis. Only two ordered water molecules per peptide molecule were located in the channel. Comparisons have been carried out with crystal structures of subfamily 2 16‐residue peptaibols antiamoebin and cephaibols. The repercussion of the structural analysis of samarosporin on membrane function is discussed. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Unique stabilizing interactions identified in the two-stranded alpha-helical coiled-coil: crystal structure of a cortexillin I/GCN4 hybrid coiled-coil peptide

We determined the 1.17 A resolution X-ray crystal structure of a hybrid peptide based on sequences from coiled-coil regions of the proteins GCN4 and cortexillin I. The peptide forms a parallel homodimeric coiled-coil, with C(alpha) backbone geometry similar to GCN4 (rmsd value 0.71 A). Three stabilizing interactions have been identified: a unique hydrogen bonding-electrostatic network not previously observed in coiled-coils, and two other hydrophobic interactions involving leucine residues at positions e and g from both g-a' and d-e' interchain interactions with the hydrophobic core. This is also the first report of the quantitative significance of these interactions. The GCN4/cortexillin hybrid surprisingly has two interchain Glu-Lys' ion pairs that form a hydrogen bonding network with the Asn residues in the core. This network, which was not observed for the reversed Lys-Glu' pair in GCN4, increases the combined stability contribution of each Glu-Lys' salt bridge across the central Asn15-Asn15' core to approximately 0.7 kcal/mole, compared to approximately 0.4 kcal mole(-1) from a Glu-Lys' salt bridge on its own. In addition to electrostatic and hydrogen bonding stabilization of the coiled-coil, individual leucine residues at positions e and g in the hybrid peptide also contribute to stability by 0.7 kcal/mole relative to alanine. These interactions are of critical importance to understanding the stability requirements for coiled-coil folding and in modulating the stability of de novo designed macromolecules containing this motif.     

IR investigation on dehydrophenylalanine containing model peptides in helical conformation deposited on a crystal surface

Fourier transform ir spectra have been recorded for three 3₁₀‐helical and one α‐helical pentapeptides containing dehydrophenylalanine, in a thin solid film, in order to find marker bands for various secondary structures encountered in peptides containing dehydroaminoacids. The peptide solutions were deposited and dried as thin film on zinc selenide crystal surface. This convenient sampling method has provided reliable estimates of peptide secondary structure in solid state. Detailed vibrational assignments in the spectral region between 1200–1700 cm⁻¹ are reported. In this region, peptide amide I, II, and III vibrations occur. Spectra–structure correlation has been presented based on the amide modes. Comparison of the ir spectra with available crystal structure data provides qualitative support for assignments of ir bands to 3₁₀‐helical structure and α‐helical structure in dehydrophenylalanine containing pentapeptides. Band frequency assignments for 3₁₀‐helical conformation are consistent for all three peptides. All the assignments agree closely with the theoretical predictions. The spectral differences between 3₁₀‐helical peptides and the α‐helical peptide have been highlighted. These findings demonstrate that a method based on ir spectroscopy can be developed for a useful approximation of three‐dimensional structure of dehydropeptides in solid state. © 1999 John Wiley & Sons, Inc. Biopoly 50: 595–601, 1999