Difficult macromolecular structures determined using X-ray diffraction techniques

Macromolecular crystallography has been, for the last few decades, the main source of structural information of biological macromolecular systems and it is one of the most powerful techniques for the analysis of enzyme mechanisms and macromolecular interactions at the atomic level. In addition, it is also an extremely powerful tool for drug design. Recent technological and methodological developments in macromolecular X-ray crystallography have allowed solving structures that until recently were considered difficult or even impossible, such as structures at atomic or subatomic resolution or large macromolecular complexes and assemblies at low resolution. These developments have also helped to solve the 3D-structure of macromolecules from twin crystals. Recently, this technique complemented with cryo-electron microscopy and neutron crystallography has provided the structure of large macromolecular machines with great precision allowing understanding of the mechanisms of their function.     

Synchrotron protein footprinting: a technique to investigate protein-protein interactions.

Traditional approaches for macromolecular structure elucidation, including NMR, crystallography and cryo-EM have made significant progress in defining the structures of protein-protein complexes. A substantial number of macromolecular structures, however, have not been examined with atomic detail due to sample size and heterogeneity, or resolution limitations of the technique; therefore, the general applicability of each method is greatly reduced. Synchrotron footprinting attempts to bridge the gap in these methods by monitoring changes in accessible surface areas of discrete macromolecular moieties. As evidenced by our previous studies on RNA folding and DNA-protein interactions, the three-dimensional structure is probed by examining the reactions of these moieties with hydroxyl radicals generated by synchrotron X-rays. Here we report the application of synchrotron footprinting to the investigation of protein- protein interactions, as the novel technique has been utilized to successfully map the contact sites of gelsolin segment-1 in the gelsolin segment 1/actin complex. Footprinting results demonstrate that phenylalanine 104, located on the actin binding helix of gelsolin segment 1, is protected from hydroxyl radical modification in the presence of actin. This change in reactivity results from the specific protection of gelsolin segment-1, consistent with the substantial decrease in solvent accessibility of F104 upon actin binding, as calculated from the crystal structural of the gelsolin segment 1/actin complex. The results presented here establish synchrotron footprinting as a broadly applicable method to probe structural features of macromolecular complexes that are not amenable to conventional approaches.     

RMS: programs for generating raster molecular surfaces

RMS (Raster Molecular Surfaces) is a package of programs that offer the researcher a number of solid modeling techniques for presenting a macromolecular structure. The programs use a mapping algorithm, calculating the shading parameters only once, to reduce computation time. A simple linear approximation is used for antialiasing of atomic edges, shadows and surface intersections. I have implemented two major advances: depth cueing using an opaque “fog” and z-clipping to show detailed interactions in the interior of molecules. Spherical atoms and cylindrical bonds are also available.     

Synchrotron Protein Footprinting: A Technique to Investigate Protein-Protein Interactions

Abstract

Traditional approaches for macromolecular structure elucidation, including NMR, crystallography and cryo-EM have made significant progress in defining the structures of protein-protein complexes. A substantial number of macromolecular structures, however, have not been examined with atomic detail due to sample size and heterogeneity, or resolution limitations of the technique; therefore, the general applicability of each method is greatly reduced. Synchrotron footprinting attempts to bridge the gap in these methods by monitoring changes in accessible surface areas of discrete macromolecular moieties. As evidenced by our previous studies on RNA folding and DNA-protein interactions, the three-dimensional structure is probed by examining the reactions of these moieties with hydroxyl radicals generated by synchrotron X-rays. Here we report the application of synchrotron foot- printing to the investigation of protein-protein interactions, as the novel technique has been utilized to successfully map the contact sites of gelsolin segment-1 in the gelsolin segment 1/actin complex. Footprinting results demonstrate that phenylalanine 104, located on the actin binding helix of gelsolin segment 1, is protected from hydroxyl radical modification in the presence of actin. This change in reactivity results from the specific protection of gel- solin segment-1, consistent with the substantial decrease in solvent accessibility of F104 upon actin binding, as calculated from the crystal structural of the gelsolin segment 1/actin complex. The results presented here establish synchrotron footprinting as a broadly applicable method to probe structural features of macromolecular complexes that are not amenable to conventional approaches.     

Display and interpretation of solvent electron density distributions in insulin crystals

In macromolecular crystallography, three-dimensional contour surfaces are useful for interactive computer graphics displays of the protein electron density but are less effective for presenting static images of large volumes of solvent density. A raster-based computer graphics program which displays depth-cued projections of continuous density distributions has been developed to analyze the distribution of solvent atoms in macromolecular crystals. Maps of the water distribution in the cubic insulin crystal show some well-ordered waters, which are bound to surrounding protein atoms by multiple hydrogen bonds, and an ill-defined solvent structure at a greater distance from the protein surface. Molecular dynamics calculations were used to assist in the interpretation of the time-varying solvent structure within two enclosed cavities in the crystal. Two water molecules that ligate a sodium ion were almost immobile during the simulation but the majority of water molecules were found to move rapidly between the density maxima identified from the crystallographic refinement.     

The Phenix software for automated determination of macromolecular structures

X-ray crystallography is a critical tool in the study of biological systems. It is able to provide information that has been a prerequisite to understanding the fundamentals of life. It is also a method that is central to the development of new therapeutics for human disease. Significant time and effort are required to determine and optimize many macromolecular structures because of the need for manual interpretation of complex numerical data, often using many different software packages, and the repeated use of interactive three-dimensional graphics. The Phenix software package has been developed to provide a comprehensive system for macromolecular crystallographic structure solution with an emphasis on automation. This has required the development of new algorithms that minimize or eliminate subjective input in favor of built-in expert-systems knowledge, the automation of procedures that are traditionally performed by hand, and the development of a computational framework that allows a tight integration between the algorithms. The application of automated methods is particularly appropriate in the field of structural proteomics, where high throughput is desired. Features in Phenix for the automation of experimental phasing with subsequent model building, molecular replacement, structure refinement and validation are described and examples given of running Phenix from both the command line and graphical user interface.     

Structure determination of macromolecular assemblies by single-particle analysis of cryo-electron micrographs

A new generation of electron microscopes equipped with field emission gun electron sources and the ability to image molecules in their native environment at liquid nitrogen or helium temperatures has enabled the analysis of macromolecular structures at medium resolution (approximately 10 angstroms) and in different conformational states. The amalgamation of electron microscopy and X-ray crystallographic approaches makes it possible to solve structures in the 100-1000 angstroms size range, advancing our understanding of the function of complex assemblies. Many new structures have been solved during the past two years, including one of the smallest complexes to be determined by single-particle cryo-electron microscopy, the transferrin receptor-transferrin complex. Other notable results include the near atomic level resolution structure of the nicotinic acetylcholine receptor in helical arrays and an icosahedral virus structure with an asymmetric polymerase resolved.     

Photorealistic image generation of molecular structure on PC screen using the ray-tracing technique

A PC version of three-dimensional molecular graphics package has been developed to run under MS-DOS environment on IBM PC-compatible computers equipped with a VGA graphics board. The program consists of two parts: a menu-driven interactive system module in EGA mode, and a ray-tracing module in VGA mode. In the 256-color VGA mode, ray-tracing images are represented with a 4-color map, with 64 levels for each color: 32 levels of illuminance and 32 levels of saturation. Molecular structure can be analyzed along various directions with various light sources. Ray-tracing images are also represented in a 16-color EGA mode with the half-toning method, which can display 76 gray levels for each color. To obtain good photo-realistic images in an efficient way, we have used two light sources, with an intensity ratio of 7:3, which are located in front of the top right and bottom left corners of the screen.     

Low-resolution density maps from atomic models: how stepping "back" can be a step "forward"

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15-40 A), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.     

The refined structure of a protein catenane: the HK97 bacteriophage capsid at 3.44 A resolution

The HK97 bacteriophage capsid is a unique example of macromolecular catenanes: interlocked rings of covalently attached protein subunits. The chain mail organization of the subunits stabilizes a particle in which the maximum thickness of the protein shell is 18A and the maximum diameter is 550A. The electron density has the appearance of a balloon illustrating the extraordinary strength conferred by the unique subunit organization. The refined structure shows novel qualities of the HK97 shell protein, gp5 that, together with the protease gp4, guides the assembly and maturation of the virion. Although gp5 forms hexamers and pentamers and the subunits exist in different structural environments, the tertiary structures of the seven protein molecules in the viral asymmetric unit are closely similar. The interactions of the subunits in the shell are exceptionally complex with each subunit interacting with nine other subunits. The interactions of the N-terminus released after gp5 cleavage appear important for organization of the loops that become crosslinked to the core of a neighboring subunit at the maturation. A comparison with a model of the Prohead II structure revealed that the surfaces of non-covalent contact between the monomers that build up hexamers/pentamers are completely redefined during maturation.     

Three-dimensional structure of catalase from Micrococcus lysodeikticus at 1.5 A resolution.

The three-dimensional crystal structure of catalase from Micrococcus lysodeikticus has been solved by multiple isomorphous replacement and refined at 1.5 A resolution. The subunit of the tetrameric molecule of 222 symmetry consists of a single polypeptide chain of about 500 amino acid residues and one haem group. The crystals belong to space group P4(2)2(1)2 with unit cell parameters a = b = 106.7 A, c = 106.3 A, and there is one subunit of the tetramer per asymmetric unit. The amino acid sequence has been tentatively determined by computer graphics model building and comparison with the known three-dimensional structure of beef liver catalase and sequences of several other catalases. The atomic model has been refined by Hendrickson and Konnert's least-squares minimisation against 94,315 reflections between 8 A and 1.5 A. The final model consists of 3,977 non-hydrogen atoms of the protein and haem group, 426 water molecules and one sulphate ion. The secondary and tertiary structures of the bacterial catalase have been analyzed and a comparison with the structure of beef liver catalase has been made.     

Self-assembly of ATP synthase subunit c rings

Subunit c of the H(+) transporting ATP synthase is an essential part of its membrane domain that participates in transmembrane proton conduction. The annular architecture of the subunit c from different species has been previously reported. However, little is known about the type of interactions that affect the formation of c-rings in the ATPase complex. Here we report that subunit c over-expressed in Escherichia coli and purified in non-ionic detergent solutions self-assembles into annular structures in the absence of other subunits of the complex. The results suggest that the ability of subunit c to form rings is determined by its primary structure.     

The three-dimensional structure of P2 myelin protein.

The three-dimensional structure of P2 protein from peripheral nervous system myelin has been determined at 2.7 A resolution by X-ray crystallography. The single isomorphous replacement/anomalous map was interpreted using skeletonized electron density on a computer graphics system. An atomic model was built using fragment fitting. The structure forms a compact 10-stranded up-and-down beta-barrel which encapsulates residual electron density that we interpret as a fatty acid molecule. This beta-barrel shows some similarity to, but is different from, the retinol binding protein family of structures. The relationship of the P2 structure to a family of cytoplasmic, lipid binding proteins is described.     

Dissection of the network of interactions that links RNA processing with glycolysis in the Bacillus subtilis degradosome

The RNA degradosome is a multiprotein macromolecular complex that is involved in the degradation of messenger RNA in bacteria. The composition of this complex has been found to display a high degree of evolutionary divergence, which may reflect the adaptation of species to different environments. Recently, a degradosome-like complex identified in Bacillus subtilis was found to be distinct from those found in proteobacteria, the degradosomes of which are assembled around the unstructured C-terminus of ribonuclease E, a protein not present in B. subtilis. In this report, we have investigated in vitro the binary interactions between degradosome components and have characterized interactions between glycolytic enzymes, RNA-degrading enzymes, and those that appear to link these two cellular processes. The crystal structures of the glycolytic enzymes phosphofructokinase and enolase are presented and discussed in relation to their roles in the mediation of complex protein assemblies. Taken together, these data provide valuable insights into the structure and dynamics of the RNA degradosome, a fascinating and complex macromolecular assembly that links RNA degradation with central carbon metabolism.     

Rendering volumetric data in molecular systems

A raster-based computer graphics method of imaging volumetric data (data sampled on a three-dimensional grid) has been added to an existing molecular rendering program. Any molecular property expressed as a 3D grid of scalar data values can be displayed around and inside of the molecular van der Waals surface as a collection of colored clouds and transparent surfaces. Different antical properties, such as color and opacity, are assigned to ranges of the molecular property and are rendered by a ray-tracing technique simulating the shading and shadowing of real objects, making the final images highly eadable. We have found useful applications in the visualization of crystallographic electron density, electrostatic potentials and protein active sites.     

Low-Resolution Density Maps from Atomic Models: How Stepping “Back” Can Be a Step “Forward”

Atomic-resolution structures have had a tremendous impact on modern biological science. Much useful information also has been gleaned by merging and correlating atomic-resolution structural details with lower-resolution (15–40 Å), three-dimensional (3D) reconstructions computed from images recorded with cryo-transmission electron microscopy (cryoTEM) procedures. One way to merge these structures involves reducing the resolution of an atomic model to a level comparable to a cryoTEM reconstruction. A low-resolution density map can be derived from an atomic-resolution structure by retrieving a set of atomic coordinates editing the coordinate file, computing structure factors from the model coordinates, and computing the inverse Fourier transform of the structure factors. This method is a useful tool for structural studies primarily in combination with 3D cryoTEM reconstructions. It has been used to assess the quality of 3D reconstructions, to determine corrections for the phase-contrast transfer function of the transmission electron microscope, to calibrate the dimensions and handedness of 3D reconstructions, to produce difference maps, to model features in macromolecules or macromolecular complexes, and to generate models to initiate model-based determination of particle orientation and origin parameters for 3D reconstruction.     

YUP.SCX: coaxing atomic models into medium resolution electron density maps

The structures of large macromolecular complexes in different functional states can be determined by cryo-electron microscopy, which yields electron density maps of low to intermediate resolutions. The maps can be combined with high-resolution atomic structures of components of the complex, to produce a model for the complex that is more accurate than the formal resolution of the map. To this end, methods have been developed to dock atomic models into density maps rigidly or flexibly, and to refine a docked model so as to optimize the fit of the atomic model into the map. We have developed a new refinement method called YUP.SCX. The electron density map is converted into a component of the potential energy function to which terms for stereochemical restraints and volume exclusion are added. The potential energy function is then minimized (using simulated annealing) to yield a stereochemically-restrained atomic structure that fits into the electron density map optimally. We used this procedure to construct an atomic model of the 70S ribosome in the pre-accommodation state. Although some atoms are displaced by as much as 33 Å, they divide themselves into nearly rigid fragments along natural boundaries with smooth transitions between the fragments.     

The structural basis for the action of the antibiotics tetracycline, pactamycin, and hygromycin B on the 30S ribosomal subunit

We have used the recently determined atomic structure of the 30S ribosomal subunit to determine the structures of its complexes with the antibiotics tetracycline, pactamycin, and hygromycin B. The antibiotics bind to discrete sites on the 30S subunit in a manner consistent with much but not all biochemical data. For each of these antibiotics, interactions with the 30S subunit suggest a mechanism for its effects on ribosome function.