Assessment of Lemna gibba L. (duckweed) as a potential ecological indicator for contaminated aquatic ecosystem by boron mine effluent

Duckweeds, as a group, are important early warning indicators for the assessment of contaminated ecosystems due to their propensity to accumulate pollutants. In the present study, we investigated the potential use of Lemna gibba L. (Lemnaceae) as an ecological indicator for boron (B) mine effluent containing B concentration above 10 mg l⁻¹. For this purpose, L. gibba fronds were grown for 7 days in simulated water contaminated with B mine effluent. The important note is that this study was carried out in Kırka (Eskişehir, Turkey) B reserve area, which is the largest borax reserve in all over the world, under natural climatic conditions in the field. The results demonstrated that accumulations of B by L. gibba gradually increased based on the initial B concentrations (10, 25, 50, 100, and 150 mg l⁻¹) of the mine effluent. B concentration in the dry weight of the plant reached 639 mg kg⁻¹ when the minimum initial dosage (10 mg l⁻¹) was applied and 2711 mg kg⁻¹ when the maximum initial dosage (150 mg l⁻¹) was applied during the study. However, significant reductions in their relative growth rates occurred in 50, 100 and 150 mg l⁻¹ initial B concentrations. Results suggest that 25 mg l⁻¹ B concentration in water seemed to be a sensitive endpoint for L. gibba that could be used as a critical bioindicator level of B contaminated water. Following our data, we also constructed a simple growth model under the climatic conditions in this region of Turkey, but in instructive as a worldwide model. L. gibba is, therefore, suggested to be able to use as both an indicator and a phytoremediation tool because of its high accumulation capacity for B contaminated water.     

Treatment of dye-rich wastewater by an immobilized thermophilic cyanobacterial strain: Phormidium sp.

The removal of Remazol Blue and Reactive Black B by the immobilized thermophilic cyanobacterial strain Phormidium sp. was investigated under thermophilic conditions in a batch system, in order to determine the optimal conditions required for the highest dye removal. In the experiments, performed at pH 8.5, with different initial dye concentrations between 9.1 mg l⁻¹ and 82.1 mg l⁻¹ and at 45 °C, calcium alginate immobilized Phormidium sp. showed high dye decolorization, with maximum uptake yields ranging from 50% to 88% at all dye concentrations tested. When the effects of high dye concentrations on dye removal were investigated, the highest uptake yield in the beads was 50.3% for 82.1 mg l⁻¹ Remazol Blue and 60.0% for 79.5 mg l⁻¹ Reactive Black B. The highest color removal was detected at 45 °C and 50 °C incubation temperatures for all dye concentrations. As the temperature decreased, the removal yield of immobilized Phormidium sp. also decreased. At about 75 mg l⁻¹ initial dye concentrations, the highest specific dye uptake measured was 41.29–41.17 mg g⁻¹ for Remazol Blue and 47.69–43.82 mg g⁻¹ for Reactive Black B at 45 °C and 50 °C incubation temperatures, respectively, after 8 days incubation.     

Chromate reduction by resting cells of Achromobacter sp. Ch-1 under aerobic conditions

Chromate reduction was carried out by resting cells of Achromobacter sp. Ch-1 with lactate as electron donor under aerobic conditions. The reduction activity of the samples supplemented with lactate was two times as those without lactate. The reduction rate was influenced by initial pH and lactate concentration. Under the optimal conditions, pH 9.0 and 4000 mg l⁻¹ lactate supplement, reduction rate was 5.45 mg l⁻¹ min⁻¹. The reduction rate decreased with increasing of Cr(VI) concentrations and increased with cell densities proportionally. The maximum reduction limit of Ch-1 cells was obtained at 2107 mg l⁻¹ of Cr(VI).     

Resorcinol degradation by a <Emphasis Type="Italic">Penicillium chrysogenum</Emphasis> strain under osmotic stress: mono and binary substrate matrices with phenol

A phenol-degrading Penicillium chrysogenum strain previously isolated from a salt mine was able to grow at 1,000 mg l⁻¹ of resorcinol on solid medium. The aerobic degradation of resorcinol by P. chrysogenum CLONA2 was studied in batch cultures in minimal mineral medium with 58.5 g l⁻¹ of sodium chloride using resorcinol as the sole carbon source. The fungal strain showed the ability to degrade up to 250 mg l⁻¹ of resorcinol. Resorcinol and phenol efficiency degradation by P. chrysogenum CLONA2 was compared. This strain removes phenol faster than resorcinol. When phenol and resorcinol were in binary substrate matrices, phenol enhanced resorcinol degradation, and organic load decreased with respect to the mono substrate matrices. The acute toxicity of phenol and resorcinol, individually and in combination, to Artemia franciscana larvae has been verified before and after the bioremediation process with P. chrysogenum CLONA2. The remediation process was effective in mono and binary substrate systems.     

Multiple regeneration pathways in Spathoglottis plicata Blume — A study in vitro

Asymbiotic germination of immature seeds (embryos), and mature seeds and micropropagation of Spathoglottis plicata were described. Effects of three nutrition media namely, Murashige & Skoog (MS); Phytamax (PM); and Phyto-Technology orchid seed sowing medium (P₇₂₃), two carbon sources such as glucose and sucrose at 2–3% (w/v), two plant growth regulators such as 6-benzylaminopurine (BAP; 0.5–3.0 mg l^− 1) and α-naphthalene acetic acid (NAA; 0.5–2.0 mg l^− 1) and peptone (2.0 g l^− 1) were examined on seed germination, early protocorm development and micropropagation. The maximum germination of mature seeds (95%) was recorded in PM medium supplemented with 2% (w/v) sucrose + 2.0 g l^− 1 peptone. For germination of embryos P₇₂₃ medium supplemented with 1.0 mg l^− 1 BAP proved best. Multiple shoot buds or protocorm-like bodies (PLBs) were produced from stem segments of in vitro raised seedlings. Both direct organogenesis and embryogenesis were observed and the morphogenetic response was initiated by different concentrations and combinations of PGRs. The optimum PGR combination for maximal PLB regeneration was 1.0 mg l^− 1 NAA + 2.5 mg l^− 1 BAP, while 1.0 mg l^− 1 NAA + 1.0 mg l^− 1 BAP for shoot bud development. Strong and stout root system was induced in half strength PM medium supplemented with 0.5 mg l^− 1 IAA. The well-rooted plantlets were transferred to pots containing a potting mixture composed of saw dust, coconut coir, humus, and coal pieces at 1:1:1:2 (w/w) with 80% survival in outside environment and flowered after two years of transfer.     

Isolation of hexavalent chromium resistant bacteria from industrial saline effluents and their ability of bioaccumulation

The mixed cultures has been isolated from industrial saline wastewater contaminated with chromium(VI), using enrichment in the presence of 50 mg l⁻¹ chromium(VI) and 4% (w/v) NaCl at pH 8. In this study, the molasses (M) medium was selected a suitable medium for the effective chromium bioaccumulation by the mixed cultures. Eleven pure isolates obtained from mixed cultures and some of them showed high bioaccumulation in the M media containing about 100 mg l⁻¹ chromium(VI) and 4% NaCl. The strain 8 (99.3%) and 10 (99.1%) were able to bioaccumulate more efficient than the mixed culture (98.9%) in this media. But the highest specific Cr uptake was obtained by the mixed cultures followed by strain 8 and 10 with 56.71, 33.14 and 21.7 mg g⁻¹, respectively. Bioaccumulation of chromium(VI) ions by the strain 8 growing in the media with chromium(VI) and NaCl was studied in a batch system as a function of initial chromium(VI) (86.6–547.6 mg l⁻¹) and NaCl (0, 2, 4, 6% w/v) concentrations. During all the experiments, the uptake yield of the strain 8 was highly affected from NaCl concentrations in the medium at high initial chromium(VI) concentrations. But at low chromium(VI) concentration, strain 8 was not affected from NaCl concentrations in the medium. The maximum uptake yield were obtained in the M media with 2% NaCl as 98.8% for 110.0 mg l⁻¹, 98.6% for 217.1 mg l⁻¹, 98.6% for 381.7 mg l⁻¹ and 98.2% for 547.6 mg l⁻¹ initial chromium(VI) concentrations. The strain 8 tolerated a 6% (w/v) NaCl concentration was able to bioaccumulate more than 95% of the applied chromium(VI) at the 97.6–224.4 mg l⁻¹ initial chromium(VI) concentrations. The results presented in this paper was shown that these pure and mixed cultures might be of use for the bioaccumulation of chromium(VI) from saline wastewater.     

Development of a microtitre plate method for determination of phenol utilization,biofilm formation and respiratory activity by environmental bacterial isolates

Twenty-five aerobic phenol-degrading bacteria, isolated from different environmental samples on phenol agar after several subcultures in phenol broth, utilized phenol (0.2 g l⁻¹) within 24 h, but removal of phenol was more rapid when other carbon sources were also present. A microtitre plate method was developed to determine growth rate, biofilm formation and respiratory activity of the strains isolated. Pseudomonas putida strains C5 and D6 showed maximum growth (as O.D. at 600 nm), P. putida D6 and unidentified bacterial strain M1 were more stable at high concentrations of phenol (0.8 g l⁻¹), and P. putida C5 formed the greatest amount of biofilm in 0.5 g phenol l⁻¹ medium. Measurement of dehydrogenase activity as reduction of triphenyl tetrazolium chloride supported data on growth rate and biofilm formation. The microtitre plate method provided a selective method for detection of the best phenol degrading and biofilm-forming microorganisms, and was also a rapid, convenient means of studying the effect of phenol concentration on growth rate and biofilm formation.     

Enrichment,isolation, and characterization of phenol-degrading Pseudomonas resinovorans strain P-1 and Brevibacillus sp. strain P-6

The objectives of this research were to isolate pure phenol-degrading strains from enriched mixed cultures, monitoring the variations of species during the enrichment period. Two strains were isolated from the acclimated mixed culture. They were identified as Pseudomonas resinovorans strain P-1 and Brevibacillus sp. strain P-6. DGGE indicated that strain P. resinovorans appeared at the beginning, and maintained well during the enrichment period. The second strain, Brevibacillus sp., did not appear in the initial stage, but showed up after 2 weeks of enrichment. The optimum growth temperatures for P. resinovorans and Brevibacillus sp. were 31 and 39 °C, respectively. P. resinovorans could degrade phenol completely within 57.5 h, when the initial phenol concentration was lower than 600 mg l⁻¹. If the initial phenol concentration was lower than 200 mg l⁻¹, Brevibacillus sp. could remove phenol completely within 93.1 h. It was obvious that the phenol-degrading ability of P. resinovorans was much better than that of Brevibacillus sp. The metabolic pathway for P. resinovorans phenol degradation was assigned to the meta-cleavage activity of catechol 2,3-dioxygenase.     

Protocorm culture of Dendrobium candidum in balloon type bubble bioreactors

Protocorm cultures of Dendrobium candidum were established in balloon type bubble bioreactors using Murashige and Skoog (MS) medium with 0.5 mg l⁻¹ α-naphthaleneacetic acid (NAA), 2.5% (w/v) sucrose, 5:25 mM NH₄:NO₃ and 1% (v/v) banana homogenate for the production of biomass and bioactive compounds. In 3 l bioreactor containing 2 l medium, a maximum protocorm biomass (21.0 g l⁻¹ dry biomass) and also optimum quantities of total polysaccharides (389.3 mg g⁻¹ DW), coumarins (18.0 mg g⁻¹ DW), polyphenolics (11.9 mg g⁻¹ DW), and flavonoids (4.5 mg g⁻¹ DW) were achieved after 7 weeks of culture. Based on these studies, 5 and 10 l bioreactor cultures were established to harvest 80 g and 160 g dry biomass. In 10 l bioreactors, the protocorms grown were accumulated with optimal levels of polysaccharides (424.1 mg g⁻¹ DW), coumarins (15.8 mg g⁻¹ DW), polyphenols (9.03 mg g⁻¹ DW) and flavonoids (4.7 mg g⁻¹ DW). The bioreactor technology developed here will be useful for the production of important bioactive compounds from D. candidum.     

Response of miscanthus to toxic cadmium applications during the period of maximum growth

Plants of miscanthus were grown in a Cd-free solution up to 1 month before heading and then were exposed to 0, 0.75, 1.5, 2.25 and 3 mg l⁻¹ cadmium for 36 days. All cadmium levels were toxic to miscanthus. Growth response was not dose-dependent and two toxicity thresholds were identified: one between 0 and 0.75 mg l⁻¹ Cd, the other between 2.25 and 3 mg l⁻¹ Cd. The former caused a biomass decrease by about 50%, whereas the latter completely inhibited growth and disrupted the mechanisms that restricted Cd translocation to the shoot. Growth of the aerial part was affected by cadmium more than that of the hypogeal one. Cadmium did not change the N concentration of different plant parts, but markedly reduced the N uptake of the plant, the N net uptake rate (NUR) and the N net translocation rate (NTR) from the rhizome to the aerial part. These two indexes equalled zero when plants ceased to grow. Otherwise, the Cd-NUR increased with Cd supply and the Cd-NTR from rhizome to aerial part showed the highest increment when plants did not grow at all. This suggests different uptake pathways for the two elements, active for nitrogen and passive for cadmium. The Cd concentration and the Cd content markedly increased with all Cd levels, following the order roots ≫ rhizome > culms > leaves. The Cd concentration and the Cd content of aerial organs increased with Cd supply, but increments were highest between 2.25 and 3 mg l⁻¹ Cd. The highest Cd concentrations were recorded in plants grown with 3 mg l⁻¹ Cd and were 41 and 122 mg kg⁻¹, respectively, for the aerial and the hypogeal plant parts. The hypogeal plant part retained most of the cadmium taken up from solution, accounting for approximately 87% of total plant cadmium with the three lower Cd levels, and for 73% with the highest one. The maximum Cd content of the entire plant was achieved with the two higher Cd levels and was approximately 4.7 mg, while the Cd content of the aerial part was highest with 3 mg l⁻¹ Cd (1.2 mg Cd per plant) and that of the hypogeal one with 2.25 mg l⁻¹ Cd (4 mg Cd per plant). The highest aerial content achieved in this experiment was 10-fold that obtained in a previous research when small-sized plants were exposed to the same Cd level.     

Improved accumulation of phenylethanoid glycosides by precursor feeding to suspension culture of Cistanche salsa

Effects of some precursors on phenylethanoid glycosides (PeGs) accumulation in Cistanche salsa cell suspension cultures were investigated. Precursors such as tyrosine, phenylalanine, caffeic acid and cucumber juice at proper concentrations could increase the total accumulation of PeGs (echinacoside, acteoside, 2′-acetylacteoside) by 50%, 12%, 12% and 23%, respectively. Under the combined feeding of precursors at proper concentrations, the total production of PeGs in bio-staged culture reached the highest amount of 1358.1 mg l⁻¹ (640.8 mg echinacoside l⁻¹, 689.4 mg acteoside l⁻¹ and 54.9 mg 2′-acetylacteoside l⁻¹), which was about two-fold of that in the control. This study showed promise for obtaining large-scale production of active ingredients in plant cells by the solid–liquid two step culture (SLTSC) technique and also provided for the first time an example for producing PeGs by C. salsa cell culture. The improved production of PeGs was higher than that in previous reports on PeG production by Cistanche deserticola cell culture fed with precursors.     

Nitrite inhibition and intermediates effects on Anammox bacteria: A batch-scale experimental study

A batch test procedure, based on manometric measurements, was used to study the Anammox process, in particular the inhibition due to nitrite and the effects of hydroxylamine and hydrazine, indicated as possible intermediates of the process. The maximum nitrite removal rate (MNRR) was measured. The method showed good reliability with a standard error of 4.5 ± 3.3% (n: 41). All the tests were carried out on samples taken from a pilot plant with Anammox suspended biomass. The tests were used also to monitor the reactor activity. By testing different spiked additions of nitrite (10–75 mg NO₂⁻-N L⁻¹), a short-term inhibition, with more than 25% MNRR decrease, was found at concentrations higher than 60 mg NO₂⁻-N L⁻¹. Repeated additions of nitrite higher than 30 mg NO₂⁻-N L⁻¹ caused losses of activity. After a complete loss of activity, spiked additions of hydroxylamine (30 mg N L⁻¹ in total) determined a 20% permanent recovery. Low amounts of the intermediates (1–3 mg N L⁻¹) applied on partially inhibited samples and uninhibited samples produced temporary increases in activity up to 50% and 30%, respectively.     

Mathematical analysis of trickling filter response to pentachlorophenol shock load

The response of a laboratory trickling filter to a step increase in pentachlorophenol (PCP) feed concentration was analyzed using continuous stirred tank (CSTR) and plug flow reactor (PFR) models. The CSTR model provided a slightly better fit to experimental data than the plug flow model when specific growth rate, μ, and PCP-degrading biomass concentration before the shock load, X₀, were variable parameters but was clearly superior when the mean residence time, τ, was added as a third parameter. The three-parameter CSTR model accurately represented six of seven concentration response curves corresponding to step increases in PCP feed concentration of 12–165 mg l⁻¹ and 20–150 mg l⁻¹. The continuing improvement in system response to repetitive 20–150 mg l⁻¹ shock loads was reflected by a monotonic increase in the optimal estimates of initial rate of biomass production.     

Decolorization of azo dye by immobilized Pseudomonas luteola entrapped in alginate–silicate sol–gel beads

Pseudomonas luteola was immobilized by entrapment in alginate–silicate sol–gel beads for decolorization of the azo dye, Reactive Red 22. The influences of biomass loading and operating conditions on specific decolorization rate and dye removal efficiency were studied in details. The immobilized cells were found to be less sensitive to changes in agitation rates (dissolved oxygen levels) and pH values. Michaelis–Menten kinetics could be used to describe the decolorization kinetics with the kinetic parameters being 36.5 mg g⁻¹ h⁻¹, 300.1 mg l⁻¹ and 18.2 mg g⁻¹ h⁻¹, 449.8 mg l⁻¹ for free and immobilized cells, respectively. After five repeated batch cycles, the decolorization rate of the free cells decreased by nearly 54%, while immobilized cells still retained 82% of their original activity. The immobilized cells exhibited better thermal stability during storage and reaction when compared with free cells. From SEM observation, a dense silicate gel layer was found to surround the macroporous alginate–silicate core, which resulted in much improved mechanical stability over that of alginate beads when tested under shaking conditions. Alginate–silicate matrices appeared to be the best matrix for immobilization of P. luteola in decolorization of Reactive Red 22 when compared with previous results using synthetic or natural polymer matrices.     

Potential of Typha angustifolia for phytoremediation of heavy metals from aqueous solution of phenol and melanoidin

Typha angustifolia was evaluated for various heavy metals (Cu, Pb, Ni, Fe, Mn, and Zn) bioremediation potential from aqueous solution containing variable concentrations of phenol (100–800 mg l^?1) and melanoidin (2500–8500 Co–Pt) at 20, 40, and 60 days. The concentration of phenol (200–400 mg l^?1) along with melanoidin 2500 Co–Pt showed optimum for phytoremediation of tested heavy metals, while, higher concentrations of melanoidin (5600–8500 Co–Pt) showed toxic effect on T. angustifolia along with phenol. Phenol and melanoidin showed adverse effect on T. angustifolia of up to 20 days incubation, but this leads to induction of peroxidase and ascorbic acid activity to cope with adverse conditions. Subsequently, as pollutants were decreased along with plant growth, peroxidase and ascorbic acid also declined. However, with reduction of peroxidase, catalase level was increased. The Cu, Zn, and Ni were accumulated at maximum in all tested conditions. The TEM observations of T. angustifolia showed clotted deposition of metals and shrinkage of cell in root, breakdown of spongy and palisade parenchyma of leaves at higher concentration of phenol (100 mg l^?1) and melanoidin (5500 Co–Pt). Thus, this study concluded that T. angustifolia could be a potential phytoremediator for heavy metals from metal, melanoidin, and phenol containing industrial wastewater at optimized condition.     

Bioavailability and extraction of heavy metals from contaminated soil by Atriplex halimus

Pot experiments were performed to evaluate the phytoremediation capacity of plants of Atriplex halimus grown in contaminated mine soils and to investigate the effects of organic amendments on the metal bioavailability and uptake of these metals by plants. Soil samples collected from abandoned mine sites north of Madrid (Spain) were mixed with 0, 30 and 60 Mg ha⁻¹ of two organic amendments, with different pH and nutrients content: pine-bark compost and horse- and sheep-manure compost. The increasing soil organic matter content and pH by the application of manure amendment reduced metal bioavailability in soil stabilising them. The proportion of Cu in the most bioavailable fractions (sum of the water-soluble, exchangeable, acid-soluble and Fe–Mn oxides fractions) decreased with the addition of 60 Mg ha⁻¹ of manure from 62% to 52% in one of the soils studied and from 50% to 30% in the other. This amendment also reduced Zn proportion in water-soluble and exchangeable fractions from 17% to 13% in one of the soils. Manure decreased metal concentrations in shoots of A. halimus, from 97 to 35 mg kg⁻¹ of Cu, from 211 to 98 mg kg⁻¹ of Zn and from 1.4 to 0.6 mg kg⁻¹ of Cd. In these treatments there was a higher plant growth due to the lower metal toxicity and the improvement of nutrients content in soil. This higher growth resulted in a higher total metal accumulation in plant biomass and therefore in a greater amount of metals removed from soil, so manure could be useful for phytoextraction purposes. This amendment increased metal accumulation in shoots from 37 to 138 mg pot⁻¹ of Cu, from 299 to 445 mg pot⁻¹ of Zn and from 1.8 to 3.7 mg pot⁻¹ of Cd. Pine bark amendment did not significantly alter metal availability and its uptake by plants. Plants of A. halimus managed to reduce total Zn concentration in one of the soils from 146 to 130 mg kg⁻¹, but its phytoextraction capacity was insufficient to remediate contaminated soils in the short-to-medium term. However, A. halimus could be, in combination with manure amendment, appropriate for the phytostabilization of metals in mine soils.     

Naphthalene and biphenyl oxidation by two marine Pseudomonas strains isolated from Venice Lagoon sediment

A sediment sample from Venice Lagoon was found to be contaminated with 475 mg Kg⁻¹ polycyclic aromatic hydrocarbons (PAHs). Naphthalene was the principal pollutant at 26% of total PAHs. Two strains of Pseudomonas SN1 and SB1 were isolated from sediment amended with 2% naphthalene. 16S rRNA gene sequence analysis indicated that the two strains have about 99% nucleotide identity with strains of the genus Pseudomonas, and are very close to Pseudomonas stutzeri. Their metabolic profiles showed significant nutritional differences, the most significant of which was that SN1 grows in marine mineral medium spiked with naphthalene and SB1 grows with biphenyl as sole carbon and energy sources. Pseudomonas sp. SN1 had a doubling time of 3.1 h with 2% naphthalene and SB1 had a doubling time of 19.5 h with 2% biphenyl. Strain SN1 oxidised naphthalene at 564±32 mg O₂ l⁻¹ d⁻¹ and SB1 oxidised biphenyl at 426±25 mg O₂ l⁻¹ d⁻¹ in respirometry reaction vessels under controlled conditions. Screening of the two strains for dioxygenase genes involved in the first step of the two hydrocarbon degradation pathways, by polymerase chain reaction, showed naphthalene dioxygenase in SN1 and biphenyl dioxygenase in SB1. The strains each have a different catechol 2,3-dioxygenase responsible for cleavage of the aromatic ring.     

Treatment of dye (Remazol Blue) and heavy metals using yeast cells with the purpose of managing polluted textile wastewaters

The bioaccumulation of chromium(VI), nickel(II), copper(II), and reactive dye by the yeast Rhodotorula mucilaginosa has been investigated in media containing molasses as a carbon and energy source. Optimal pH values for the yeast cells to remove the pollutants were pH 4 for copper(II) and dye, pH 6 for chromium(VI) and dye, and pH 5 for nickel(II) and dye in media containing 50 mg l^?1 heavy metal and 50 mg l^?1 Remazol Blue. The maximum dye bioaccumulation was observed within 4–6 days and uptake yields varied from 93% to 97%. The highest copper(II) removal yields measured were 30.6% for 45.4 mg l^?1 and 32.4% for 95.9 mg l^?1 initial copper(II) concentrations. The nickel(II) removal yield was 45.5% for 22.3 mg l^?1, 38.0% for 34.7 mg l^?1, and 30.3% for 62.2 mg l^?1. Higher chromium(VI) removal yields were obtained, such as 94.5% for 49.2 mg l^?1 and 87.7% for 129.2 mg l^?1 initial chromium(VI) concentration. The maximum dye and heavy metal bioaccumulation yield was investigated in media with a constant dye (approximately 50 mg l^?1) and increasing heavy metal concentration. In the medium with 48.9–98.8 mg l^?1 copper(II) and constant dye concentration, the maximum copper(II) bioaccumulation was 27.7% and 27.9% whereas the maximum dye bioaccumulation was 96.1% and 95.3%. The maximum chromium(VI) bioaccumulation in the medium with dye was 95.2% and 80.3% at 48.2 and 102.2 mg l^?1 chromium(VI) concentrations. In these media dye bioaccumulation was 76.1% and 35.1%, respectively. The highest nickel(II) removal was 6.1%, 20.3% and 16.0% in the medium with 23.8 mg l^?1 nickel(II) + 37.8 mg l^?1 dye, 38.1 mg l^?1 nickel(II) + 33.4 mg l^?1 dye and 59.0 mg l^?1 nickel(II) + 39.2 mg l^?1 dye, respectively. The maximum dye bioaccumulation yield in the media with nickel(II) was 94.1%, 78.0% and 58.7%, respectively.     

Evaluation of distant carbon sources in biosurfactant production by a gamma ray-induced Pseudomonas putida mutant

Pseudomonas putida 33 wild strain, subjected to gamma ray mutagenesis and designated as P. putida 300-B mutant was used as microbial rhamnolipid-producer by using distant carbon sources (viz. hydrocarbons, waste frying oils ‘WFOs’, vegetable oil refinery wastes and molasses) in the minimal media under shake flask conditions. The behavior of glucose as co-substrate and growth initiator was examined. The 300-B mutant strain showed its ability to grow on all the substrates tested and produced rhamnolipid surfactants to different extents however; soybean and corn WFOs were observed to be preferred carbon sources followed by kerosene and paraffin oils, respectively. The best cell biomass (3.5 g l⁻¹) and rhamnolipids yield (4.1 g l⁻¹) were obtained with soybean WFO as carbon source and glucose as growth initiator under fed-batch cultivation showing an optimum specific growth rate (μ) of 0.272 h⁻¹, specific product yield (q_p) of 0.318 g g⁻¹ h and volumetric productivity (P_V) of 0.024 g l⁻¹ h. The critical micelle concentration of its culture supernatant was observed to be 91 mg rhamnolipids l⁻¹ and surface tension as 31.2 mN m⁻¹.     

Production of an anti-MUC1 C595 dbFv antibody fragment in recombinant Escherichia coli

The production of C595 diabody fragment (dbFv) in Escherichia coli (E. coli) HB2151 clone has been explored. The comparison of fermentation processes mode demonstrated that a higher biomass inoculum operation enhanced C595 dbFv production. It was demonstrated that a concentration of 12.1 mg l⁻¹ broth of dbFv and a cell concentration of 23.6 g l⁻¹ broth were achieved at the end of 75 l fermentation.