NMR assignments of sparsely labeled proteins using a genetic algorithm

Sparse isotopic labeling of proteins for NMR studies using single types of amino acid (¹⁵N or ¹³C enriched) has several advantages. Resolution is enhanced by reducing numbers of resonances for large proteins, and isotopic labeling becomes economically feasible for glycoproteins that must be expressed in mammalian cells. However, without access to the traditional triple resonance strategies that require uniform isotopic labeling, NMR assignment of crosspeaks in heteronuclear single quantum coherence (HSQC) spectra is challenging. We present an alternative strategy which combines readily accessible NMR data with known protein domain structures. Based on the structures, chemical shifts are predicted, NOE cross-peak lists are generated, and residual dipolar couplings (RDCs) are calculated for each labeled site. Simulated data are then compared to measured values for a trial set of assignments and scored. A genetic algorithm uses the scores to search for an optimal pairing of HSQC crosspeaks with labeled sites. While none of the individual data types can give a definitive assignment for a particular site, their combination can in most cases. Four test proteins previously assigned using triple resonance methods and a sparsely labeled glycosylated protein, Robo1, previously assigned by manual analysis, are used to validate the method and develop a criterion for identifying sites assigned with high confidence.     

Selective labeling of a membrane peptide with 15N-amino acids using cells grown in rich medium

Nuclear magnetic resonance spectra of membrane proteins containing multiple transmembrane helices have proven difficult to resolve due to the redundancy of aliphatic and Ser/Thr residues in transmembrane domains and the low chemical shift dispersity exhibited by residues in alpha-helical structures. Although (13)C- and (15)N-labeling are useful tools in the biophysical analysis of proteins, selective labeling of individual amino acids has been used to help elucidate more complete structures and to probe ligand-protein interactions. In general, selective labeling has been performed in Escherichia coli expression systems using minimal media supplemented with a single labeled amino acid and nineteen other unlabeled amino acids and/or by using auxotrophs for specific amino acids. Growth in minimal media often results in low yields of cells or expression products. We demonstrate a method in which one labeled amino acid is added to a rich medium. These conditions resulted in high expression (> or =100 mg/L) of a test fusion protein and milligram quantities of the selectively labeled membrane peptide after cyanogen bromide cleavage to release the peptide from the fusion protein. High levels of (15)N incorporation and acceptable levels of cross-labeling into other amino acid residues of the peptide were achieved. Growth in rich media is a simple and convenient alternative to growth in supplemented minimal media and is readily applicable to the expression of proteins selectively labeled with specific amino acids.     

Prospects for resonance assignments in multidimensional solid-state NMR spectra of uniformly labeled proteins

Summary The feasibility of assigning the backbone ¹⁵N and ¹³C NMR chemical shifts in multidimensional magic angle spinning NMR spectra of uniformly isotopically labeled proteins and peptides in unoriented solid samples is assessed by means of numerical simulations. The goal of these simulations is to examine how the upper limit on the size of a peptide for which unique assignments can be made depends on the spectral resolution, i.e., the NMR line widths. Sets of simulated three-dimensional chemical shift correlation spectra for artificial peptides of varying length are constructed from published liquid-state NMR chemical shift data for ubiquitin, a well-characterized soluble protein. Resonance assignments consistent with these spectra to within the assumed spectral resolution are found by a numerical search algorithm. The dependence of the number of consistent assignments on the assumed spectral resolution and on the length of the peptide is reported. If only three-dimensional chemical shift correlation data for backbone ¹⁵N and ¹³C nuclei are used, and no residue-specific chemical shift information, information from amino acid side-chain signals, and proton chemical shift information are available, a spectral resolution of 1 ppm or less is generally required for a unique assignment of backbone chemical shifts for a peptide of 30 amino acid residues.     

NMR resonance assignments for sparsely <Superscript>15</Superscript>N labeled proteins

For larger proteins, and proteins not amenable to expression in bacterial hosts, it is difficult to deduce structures using NMR methods based on uniform ¹³C, ¹⁵N isotopic labeling and observation of just nuclear Overhauser effects (NOEs). In these cases, sparse labeling with selected ¹⁵N enriched amino acids and extraction of a wider variety of backbone-centered structural constraints is providing an alternate approach. A limitation, however, is the absence of resonance assignment strategies that work without uniform ¹⁵N, ¹³C labeling or preparation of numerous samples labeled with pairs of isotopically labeled amino acids. In this paper an approach applicable to a single sample prepared with sparse ¹⁵N labeling in selected amino acids is presented. It relies on correlation of amide proton exchange rates, measured from data on the intact protein and on digested and sequenced peptides. Application is illustrated using the carbohydrate binding protein, Galectin-3. Limitations and future applications are discussed.     

Structure and alignment of the membrane-associated peptaibols ampullosporin A and alamethicin by oriented 15N and 31P solid-state NMR spectroscopy

Ampullosporin A and alamethicin are two members of the peptaibol family of antimicrobial peptides. These compounds are produced by fungi and are characterized by a high content of hydrophobic amino acids, and in particular the α-tetrasubstituted amino acid residue α-aminoisobutyric acid. Here ampullosporin A and alamethicin were uniformly labeled with ¹⁵N, purified and reconstituted into oriented phophatidylcholine lipid bilayers and investigated by proton-decoupled ¹⁵N and ³¹P solid-state NMR spectroscopy. Whereas alamethicin (20 amino acid residues) adopts transmembrane alignments in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) or 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) membranes the much shorter ampullosporin A (15 residues) exhibits comparable configurations only in thin membranes. In contrast the latter compound is oriented parallel to the membrane surface in 1,2-dimyristoleoyl-sn-glycero-3-phosphocholine and POPC bilayers indicating that hydrophobic mismatch has a decisive effect on the membrane topology of these peptides. Two-dimensional ¹⁵N chemical shift - ¹H-¹⁵N dipolar coupling solid-state NMR correlation spectroscopy suggests that in their transmembrane configuration both peptides adopt mixed α-/3₁₀-helical structures which can be explained by the restraints imposed by the membranes and the bulky α-aminoisobutyric acid residues. The ¹⁵N solid-state NMR spectra also provide detailed information on the helical tilt angles. The results are discussed with regard to the antimicrobial activities of the peptides.     

Advances towards resonance assignments for uniformly—13C, 15N enriched bacteriorhodopsin at 18.8 T in purple membranes

Solid state NMR spectra from uniformly (13)C, (15)N enriched bacteriorhodospin (bR) purified from H. salinarium were acquired at 18.8 T using magic angle spinning methods. Isolated resonances of 2D (13)C-(13)C spectra exhibited 0.50-0.55 ppm line-widths. Several amino acid types could be assigned, and at least 12 out of 15 Ile peaks could be resolved clearly and identified based on their characteristic chemical shifts and connectivities. This study confirms that high resolution solid state NMR spectra can be obtained for a 248 amino acid uniformly labeled membrane protein in its native membrane environment and indicates that site-specific assignments are likely to be feasible with heteronuclear multidimensional spectra.     

Solid-state NMR studies of the structure and mechanisms of proteins

Magic-angle spinning solid-state NMR experiments are well suited to investigating the structures and mechanisms of important proteins that are inaccessible to X-ray crystallography and solution NMR spectroscopy, including membrane proteins and disease-related protein aggregates. Good progress has been made in the development of methods for the complete structure determination of small (<20 kDa) solid proteins using uniformly 13C, 15N-labeled samples. Studies of selectively labeled proteins focusing on labeled active sites have yielded insights into the mechanisms of enzymes and of membrane proteins involved in energy and signal transduction. Studies of selectively labeled synthetic peptides have yielded structural models for biomedically important systems, including amyloid fibrils and surface-associated peptides involved in biomineralization and cell adhesion. Novel NMR and biochemical methods are being developed to target solid-state NMR experiments within large proteins and whole cells. These approaches are being used to investigate mechanisms of transmembrane signaling by membrane receptors and to characterize binding interactions between antibiotics and bacterial cell walls. Thus, solid-state NMR is proving to be a valuable biophysical tool for probing structure and dynamics in a wide range of biomolecules.     

Assignments of backbone 1H, 13C, and 15N resonances and secondary structure of ribonuclease H from Escherichia coli by heteronuclear three-dimensional NMR spectroscopy.

The assignments of individual magnetic resonances of backbone nuclei of a larger protein, ribonuclease H from Escherichia coli, which consists of 155 amino acid residues and has a molecular mass of 17.6 kDa are presented. To remove the problem of degenerate chemical shifts, which is inevitable in proteins of this size, three-dimensional NMR was applied. The strategy for the sequential assignment was, first, resonance peaks of amides were classified into 15 amino acid types by 1H-15N HMQC experiments with samples in which specific amino acids were labeled with 15N. Second, the amide 1H-15N peaks were connected along the amino acid sequence by tracing intraresidue and sequential NOE cross peaks. In order to obtain unambiguous NOE connectivities, four types of heteronuclear 3D NMR techniques, 1H-15N-1H 3D NOESY-HMQC, 1H-15N-1H 3D TOCSY-HMQC, 13C-1H-1H 3D HMQC-NOESY, and 13C-1H-1H 3D HMQC-TOCSY, were applied to proteins uniformly labeled either with 15N or with 13C. This method gave a systematic way to assign backbone nuclei (N, NH, C alpha H, and C alpha) of larger proteins. Results of the sequential assignments and identification of secondary structure elements that were revealed by NOE cross peaks among backbone protons are reported.     

Two-dimensional structure of beta-amyloid(10-35) fibrils

Beta-amyloid (Abeta) peptides are the main protein component of the pathognomonic plaques found in the brains of patients with Alzheimer's disease. These heterogeneous peptides adopt a highly organized fibril structure both in vivo and in vitro. Here we use solid-state NMR on stable, homogeneous fibrils of Abeta(10-35). Specific interpeptide distance constraints are determined with dipolar recoupling NMR on fibrils prepared from a series of singly labeled peptides containing (13)C-carbonyl-enriched amino acids, and skipping no more that three residues in the sequence. From these studies, we demonstrate that the peptide adopts the structure of an extended parallel beta-sheet in-register at pH 7.4. Analysis of DRAWS data indicates interstrand distances of 5.3 +/- 0.3 A (mean +/- standard deviation) throughout the entire length of the peptide, which is compatible only with a parallel beta-strand in-register. Intrastrand NMR constraints, obtained from peptides containing labels at two adjacent amino acids, confirm the secondary structural findings obtained using DRAWS. Using peptides with (13)C incorporated at the carbonyl position of adjacent amino acids, structural transitions from alpha-helix to beta-sheet were observed at residues 19 and 20, but using similar techniques, no evidence for a turn could be found in the putative turn region comprising residues 25-29. Implications of this extended parallel organization for Abeta(10-35) for overall fibril formation, stability, and morphology based upon specific amino acid contacts are discussed.     

Environmental implications of the organic matter structure for white-rot fungus Pleurotus eryngii growth in a tropical climate

White-rot fungi (Pleurotus eryngii) are decomposers of lignocellulosic substrates. The relationship between the structure of humified organic matter and P. eryngii growth, is poorly understood. This study aimed to evaluate the relationship between the growth and development of white-rot fungi (P. eryngii) in two structurally different sources of humified organic matter. Fungus growth and development (mycelium diameter, fresh and dry mycelium mass, mycelium density, and biological yield) were evaluated in experiments with the application of humic substances (HS) extracted from vermicompost (VC) and peat. Both HS were characterized by CP/MAS 13C NMR spectroscopy associated with chemometrics analysis. The HS present different structural characteristics, with those extracted from VC having a predominance of functionalized C-aliphatics (carbohydrates), low hydrophobicity, and a 90% proportion of cellulose/hemicellulose carbon in the composition. HS extracted from peat have a predominance of C-aromatics (lignin fragments), higher hydrophobicity, and a proportion of lignin carbon of up to 80%. The results showed that P. eryngii growth is dependent on the C-cellulosic and C-lignin balance. HS extracted from lignin-rich peat regulates the fungus growth at initial times and sometimes inhibits the biological performance. The highly cellulosic HS from VC regulate the fungus growth at later times and its biological performance.     

Structure of subtilosin A, a cyclic antimicrobial peptide from Bacillus subtilis with unusual sulfur to alpha-carbon cross-links: formation and reduction of alpha-thio-alpha-amino acid derivatives

The complete primary and three-dimensional solution structures of subtilosin A (1), a bacteriocin from Bacillus subtilis, were determined by multidimensional NMR studies on peptide produced using isotopically labeled [(13)C,(15)N]medium derived from Anabaena sp. grown on sodium [(13)C]bicarbonate and [(15)N]nitrate. Additional samples of 1 were also generated by separate incorporations of [U-(13)C,(15)N]-L-phenylalanine and [U-(13)C,(15)N]-L-threonine using otherwise unlabeled media. The results demonstrate that in addition to having a cyclized peptide backbone (amide between N and C termini), three cross-links are formed between the sulfurs of Cys13, Cys7, and Cys4 and the alpha-positions of Phe22, Thr28, and Phe31, respectively. The stereochemistry of all residues in 1 except for the three modified ones was confirmed to be L by complete desulfurization with nickel boride, acid hydrolysis to the constituent amino acids, and conversion of these to the corresponding pentafluoropropanamide isopropyl esters for chiral GC MS analysis. The stereochemistry at the modified residues was determined by subjecting each of the eight possible stereoisomers of 1 to eight rounds of ARIA structure calculations, starting with the same NMR peak files and assignments. The stereoisomer with the l stereochemistry at Phe22 (alpha-R) and d stereochemistry at Thr28 (alpha-S) and Phe31 (alpha-S) (LDD isomer) fit the NMR data, giving the lowest energy family of structures with the best rmsd. Thus, biochemical formation of the unusual thio links proceeds with net retention of configuration at Phe22, and inversion at Thr28 and Phe31. Model amino acid derivatives bearing a sulfide moiety at the alpha-carbon were synthesized by reaction of the corresponding alpha-alkoxy compounds with benzyl thiol and SnCl(4). Separation of their pure stereoisomers and desulfurization with nickel boride demonstrated that the reduction of such compounds proceeds with epimerization, in contrast to the previously reported retention of stereochemistry for analogous reaction of steroidal sulfides. However, desulfurization of subtilosin A to cyclic peptide 14, which is inactive as an antimicrobial agent, occurs with inversion of stereochemistry at the alpha-carbons of Phe22 and Thr28 and with 4:1 retention at Phe31. This indicates that the desulfurization reaction proceeds via an N-acyl imine and that the structure of the surrounding peptide controls the geometry of reduction. Posttranslational linkage of a thiol to the alpha-carbon of an amino acid residue is unprecedented in ribosomally synthesized peptides or proteins, and very rare in secondary metabolites. Subtilosin A (1) represents a new class of bacteriocins.     

The topology of lysine-containing amphipathic peptides in bilayers by circular dichroism, solid-state NMR, and molecular modeling

In order to better understand the driving forces that determine the alignment of amphipathic helical polypeptides with respect to the surface of phospholipid bilayers, lysine-containing peptide sequences were designed, prepared by solid-phase chemical synthesis, and reconstituted into membranes. CD spectroscopy indicates that all peptides exhibit a high degree of helicity in the presence of SDS micelles or POPC small unilamellar vesicles. Proton-decoupled (31)P-NMR solid-state NMR spectroscopy demonstrates that in the presence of peptides liquid crystalline phosphatidylcholine membranes orient well along glass surfaces. The orientational distribution and dynamics of peptides labeled with (15)N at selected sites were investigated by proton-decoupled (15)N solid-state NMR spectroscopy. Polypeptides with a single lysine residue adopt a transmembrane orientation, thereby locating this polar amino acid within the core region of the bilayer. In contrast, peptides with > or = 3 lysines reside along the surface of the membrane. With 2 lysines in the center of an otherwise hydrophobic amino acid sequence the peptides assume a broad orientational distribution. The energy of lysine discharge, hydrophobic, polar, and all other interactions are estimated to quantitatively describe the polypeptide topologies observed. Furthermore, a molecular modeling algorithm based on the hydrophobicities of atoms in a continuous hydrophilic-hydrophobic-hydrophilic potential describes the experimentally observed peptide topologies well.     

NMR solution structure of the precursor for carnobacteriocin B2, an antimicrobial peptide from Carnobacterium piscicola.

Type IIa bacteriocins, which are isolated from lactic acid bacteria that are useful for food preservation, are potent antimicrobial peptides with considerable potential as therapeutic agents for gastrointestinal infections in mammals. They are ribosomally synthesized as precursors with an N-terminal leader, typically 18-24 amino acid residues in length, which is cleaved during export from the producing cell. We have chemically synthesized the full precursor of carnobacteriocin B2, precarnobacteriocin (preCbnB2), which has a C-terminal amide rather than a carboxyl, and also produced preCbnB2(1-64), which is missing two amino acid residues at the C-terminus (Arg65 and Pro66), via expression in Escherichia coli as a maltose-binding protein fusion that is then cut with Factor Xa. PreCbnB2(1-64) is readily labeled with (15)N and (13)C for NMR studies using the latter approach. Multidimensional NMR analysis of preCbnB2(1-64) shows that, like the parent bacteriocin, it exists as a random coil in water but assumes a defined conformation in water/trifluoroethanol mixtures. In 70 : 30 trifluoroethanol/water, the 3D structure of the preCbnB2 section corresponding to the mature bacteriocin is essentially the same as reported previously by us for carnobacteriocin B2 (CbnB2). This structure maintains the highly conserved alpha-helix corresponding to residues 20-38 of CbnB2 that is believed to be responsible for interaction with a target receptor in sensitive cells, including Listeria monocytogenes. PreCbnB2 also has a second alpha-helix from residues 3-13 (i.e. -15 to -5 relative to CbnB2) in the leader section of the peptide. This helix appears to be conserved in related type IIa bacteriocin precursors based on sequence analysis. It is likely to be a key recognition element for export and processing, and is probably responsible for the considerably reduced antimicrobial activity of preCbnB2. The latter effect may assist the producing cell in avoiding the toxic effects of the bacteriocin. This is the first 3D structure determined for a prebacteriocin from lactic acid bacteria.     

Solid-state NMR spin diffusion for measurement of membrane-bound peptide structure: gramicidin A

A recently developed solid-state NMR method for measurement of depths in membrane systems is applied to gramicidin A, a membrane-bound peptide of known structure, to investigate the potential of this method. (15)N-detected, (1)H spin diffusion experiments demonstrate the resolution of the technique by measuring the 4-5 A depth differences between three (15)N-labeled backbone sites (Trp13, Val7, Gly2) in gramicidin A. We also show that (13)C-detected, (1)H spin diffusion experiments on unlabeled gramicidin A are sufficient to discriminate between the end-to-end dimer and double-helix structures of gramicidin A. Thus, spin diffusion solid-state NMR experiments can provide a simple approach, which does not require labeled samples, for testing structural models of membrane-bound peptides.     

Bacterial siderophores: structure elucidation, and 1H, 13C and 15N two-dimensional NMR assignments of azoverdin and related siderophores synthesized by Azomonas macrocytogenes ATCC 12334

Two major azoverdins were isolated from the cultures of Azomonas macrocytogenes ATCC 12334 grown in irondeficient medium. Their structures have been established using fast atom bombardment-mass spectroscopy, homonuclear and heteronuclear two-dimensional ¹⁵N, ¹³C and ¹H NMR, and circular dichroism techniques. These siderophores are chromopeptides possessing at the N-terminal end of their peptide chain the chromophore derived from 2,3-diamino-6,7-dihydroxyquinoline common to pyoverdins. The linear peptide chain (l)-Hse-(d)-AcOHOrn-(d)-Ser-(l)-AcOHOrn-(d)-Hse-(l)-CTHPMD has at its C-terminal end a new natural amino acid which is the result of the condensation of 1 mol of homoserine and 1 mol of 2,4-diaminobutyric acid forming a cyclic amidine belonging to the tetrahydropyrimidine family: 2-homoseryl-4-carboxyl-3,4,5,6-tetrahydropyrimidine. The azoverdins differ only by a substitutent bound to the nitrogen on C-3 of the chromophore: azoverdin, the most abundant one, possesses a succinamide moiety, whereas azoverdin A bears a succinic acid moiety. ¹⁵N-labelled azoverdin afforded readily, after the complete assignment of the ¹⁵N spectrum of the siderophore, a sequence determination of the peptidic part of the molecule and gave evidence for the presence of two tetrahydropyrimidine groups on the molecule: one on the chromophore and the second at the C-terminal end of the siderophore.     

Structural and dynamical characterization of tubular HIV‐1 capsid protein assemblies by solid state nuclear magnetic resonance and electron microscopy

The wild‐type HIV‐1 capsid protein (CA) self‐assembles in vitro into tubular structures at high ionic strength. We report solid state nuclear magnetic resonance (NMR) and electron microscopy measurements on these tubular CA assemblies, which are believed to contain a triangular lattice of hexameric CA proteins that is similar or identical to the lattice of capsids in intact HIV‐1. Mass‐per‐length values of CA assemblies determined by dark‐field transmission electron microscopy indicate a variety of structures, ranging from single‐wall tubes to multiwall tubes that approximate solid rods. Two‐dimensional (2D) solid state ¹³C? ¹³C and ¹⁵N? ¹³C NMR spectra of uniformly ¹⁵N,¹³C‐labeled CA assemblies are highly congested, as expected for a 25.6 kDa protein in which nearly the entire amino acid sequence is immobilized. Solid state NMR spectra of partially labeled CA assemblies, expressed in 1,3‐¹³C₂‐glycerol medium, are better resolved, allowing the identification of individual signals with line widths below 1 ppm. Comparison of crosspeak patterns in the experimental 2D spectra with simulated patterns based on solution NMR chemical shifts of the individual N‐terminal (NTD) and C‐terminal (CTD) domains indicates that NTD and CTD retain their individual structures upon self‐assembly of full‐length CA into tubes. 2D ¹H‐¹³C NMR spectra of CA assemblies recorded under solution NMR conditions show relatively few signals, primarily from segments that link the α‐helices of NTD and CTD and from the N‐ and C‐terminal ends. Taken together, the data support the idea that CA assemblies contain a highly ordered 2D protein lattice in which the NTD and CTD structures are retained and largely immobilized.     

Rapid mass spectrometric analysis of 15N-Leu incorporation fidelity during preparation of specifically labeled NMR samples

Advances in NMR spectroscopy have enabled the study of larger proteins that typically have significant overlap in their spectra. Specific (15)N-amino acid incorporation is a powerful tool for reducing spectral overlap and attaining reliable sequential assignments. However, scrambling of the label during protein expression is a common problem. We describe a rapid method to evaluate the fidelity of specific (15)N-amino acid incorporation. The selectively labeled protein is proteolyzed, and the resulting peptides are analyzed using MALDI mass spectrometry. The (15)N incorporation is determined by analyzing the isotopic abundance of the peptides in the mass spectra using the program DEX. This analysis determined that expression with a 10-fold excess of unlabeled amino acids relative to the (15)N-amino acid prevents the scrambling of the (15)N label that is observed when equimolar amounts are used. MALDI TOF-TOF MS/MS data provide additional information that shows where the "extra" (15)N labels are incorporated, which can be useful in confirming ambiguous assignments. The described procedure provides a rapid technique to monitor the fidelity of selective labeling that does not require a lot of protein. These advantages make it an ideal way of determining optimal expression conditions for selectively labeled NMR samples.     

Recent developments in solid-state magic-angle spinning, nuclear magnetic resonance of fully and significantly isotopically labelled peptides and proteins

In recent years, a large number of solid-state nuclear magnetic resonance (NMR) techniques have been developed and applied to the study of fully or significantly isotopically labelled ((13)C, (15)N or (13)C/(15)N) biomolecules. In the past few years, the first structures of (13)C/(15)N-labelled peptides, Gly-Ile and Met-Leu-Phe, and a protein, Src-homology 3 domain, were solved using magic-angle spinning NMR, without recourse to any structural information obtained from other methods. This progress has been made possible by the development of NMR experiments to assign solid-state spectra and experiments to extract distance and orientational information. Another key aspect to the success of solid-state NMR is the advances made in sample preparation. These improvements will be reviewed in this contribution. Future prospects for the application of solid-state NMR to interesting biological questions will also briefly be discussed.