Micropropagation of Capparis decidua (Forsk.) Edgew. — a tree of arid horticulture

A method for micropropagation of mature trees of Capparis decidua was developed. Multiple shoots were obtained from nodal explants on Murashige and Skoog's (1962) medium+0.1mgl^–1 NAA+5.0mgl^–1BAP+additives (50mgl^–1 ascorbic acid and25 mgl^–1 each of adenine sulphate, L-arginine and citric acid) at 28 ± 2°C, 12 h/dphotoperiod and 35–40 mol m^-2s^–1 photon flux density. The shoots were multiplied by (i) subculture of nodal shoot segments onto MS +0.1 mgl^-–1 IAA+1.0mgl^–1 BAPH+additives, and (ii) repeated transfer of original explant onto MS+ 0.1mgl^–1 IAA+mg l^–1 BAP+additives, at intervals of 3 weeks. Sixty to 70% of the shoots rooted when pulse treated with 100 mg l^–1 IBA in half strength MS liquid medium for 4h, and then transferred onto hormone-free half-strength agar-gelled MS basal saltmedium. Incubation in dark at 33 ± 2°C for 6d favoured root induction. In vitro hardened plants were transferred to pots.Abbreviations IAA Indole-3-aceticacid - IBA Indole-3-butyric acid - NAA -naphthaleneacetic acid - BAP 6-benzylaminopurine - Kn 6-furfurylaminopurine - 2-ip Isopentenyl adenine - B₅ Gamborg et al. (1968) medium - MS Murashige and Skoog's (1962) medium - WP Woody plant medium (Lloyd and McCown 1981)     

Responses of dormant heather (Calluna vulgaris) seeds to light, temperature, chemical and advancement treatments

Two seed lots of Calluna vulgaris were obtainedfrom English Nature (seed of Cornish provenance) (EN) and John ChambersWildflower Seeds (JCWS). In laboratory tests, under continuous light untreatedseeds of both seed lots were partially dormant at temperatures between14–35 °C, but JCWS seeds were more deeply dormant thanENseeds. The optimum temperature for germination for both lots was ca 18°C. Germination of EN seeds was much lower in the dark than inthe light at all temperatures; JCWS seeds did not germinate in the dark. In thelight at 22 °C, dormancy of both seed lots was broken whenseeds were incubated in GA_4/7 solution(2×10^–4 M). Dormancy ofJCWSseeds at 22 °C in the light was broken when seeds wereincubated in four different smoke solutions but more so when used incombinationwith GA_4/7. Soaking seeds for 4h insmoke/GA_4/7solutions before sowing improved both the speed andpercentage germination in pot experiments on a mist bench in the glasshouse byat least 10-fold. Soaking with GA_4/7 alone produced a 5-fold increasein germination but seedlings were more etiolated than with thesmoke/GA_4/7 mixtures. A seed advancement treatment modified from thatused commercially on sugar beet seeds also promoted germination in bothlaboratory and glasshouse tests. This entailed soaking seeds in 0.2% thiramsuspension for 4h followed by incubation in excess solution at 22°C for 4 days. This treatment was not as effective as thesmoke/GA_4/7 seed soaks.     

Modeling of the pyruvate production with<Emphasis Type="Italic"> Escherichia coli</Emphasis> in a fed-batch bioreactor

A family of 10 competing, unstructured models has been developed to model cell growth, substrate consumption, and product formation of the pyruvate producing strain Escherichia coli YYC202 ldhA::Kan strain used in fed-batch processes. The strain is completely blocked in its ability to convert pyruvate into acetyl-CoA or acetate (using glucose as the carbon source) resulting in an acetate auxotrophy during growth in glucose minimal medium. Parameter estimation was carried out using data from fed-batch fermentation performed at constant glucose feed rates of q_VG=10 mL h^–1. Acetate was fed according to the previously developed feeding strategy. While the model identification was realized by least-square fit, the model discrimination was based on the model selection criterion (MSC). The validation of model parameters was performed applying data from two different fed-batch experiments with glucose feed rate q_VG=20 and 30 mL h^–1, respectively. Consequently, the most suitable model was identified that reflected the pyruvate and biomass curves adequately by considering a pyruvate inhibited growth (Jerusalimsky approach) and pyruvate inhibited product formation (described by modified Luedeking–Piret/Levenspiel term).List of symbols c_A acetate concentration (g L^–1) - c_A,0 acetate concentration in the feed (g L^–1) - c_G glucose concentration (g L^–1) - c_G,0 glucose concentration in the feed (g L^–1) - c_P pyruvate concentration (g L^–1) - c_P,max critical pyruvate concentration above which reaction cannot proceed (g L^–1) - c_X biomass concentration (g L^–1) - K_I inhibition constant for pyruvate production (g L^–1) - K_I^A inhibition constant for biomass growth on acetate (g L^–1) - K_P saturation constant for pyruvate production (g L^–1) - K_P inhibition constant of Jerusalimsky (g L^–1) - K_S^A Monod growth constant for acetate (g L^–1) - K_S^G Monod growth constant for glucose (g L^–1) - m_A maintenance coefficient for growth on acetate (g g^–1 h^–1) - m_G maintenance coefficient for growth on glucose (g g^–1 h^–1) - n constant of extended Monod kinetics (Levenspiel) (–) - q_V volumetric flow rate (L h^–1) - q_VA volumetric flow rate of acetate (L h^–1) - q_VG volumetric flow rate of glucose (L h^–1) - r_A specific rate of acetate consumption (g g^–1 h^–1) - r_G specific rate of glucose consumption (g g^–1 h^–1) - r_P specific rate of pyruvate production (g g^–1 h^–1) - r_P,max maximum specific rate of pyruvate production (g g^–1 h^–1) - t time (h) - V reaction (broth) volume (L) - Y_P/G yield coefficient pyruvate from glucose (g g^–1) - Y_X/A yield coefficient biomass from acetate (g g^–1) - Y_X/A,max maximum yield coefficient biomass from acetate (g g^–1) - Y_X/G yield coefficient biomass from glucose (g g^–1) - Y_X/G,max maximum yield coefficient biomass from glucose (g g^–1) - growth associated product formation coefficient (g g^–1) - non-growth associated product formation coefficient (g g^–1 h^–1) - specific growth rate (h^–1) - _max maximum specific growth rate (h^–1)     

Relationships between position on the parent plant and germination characteristics of seeds of parsley (Petroselinium crispum Nym.)

The percentage germination of seeds of parsley cv. Imperial Curled was higher in the light than in the dark, the high temperature limits for germination being 30 and 28°C for light and dark respectively. At the higher temperatures, the germination rate was slower in the dark. At 30°C, treatment with a gibberellin A_4/7 mixture at 2 × 10^–4 M partially alleviated the inhibiting effect of darkness on the germination percentage. Pre-incubation of parsley seeds at 35°C in the dark for 30 h increased the rate, but decreased the percentage, of germination of seeds incubated at 15°C in the light. Germination and seedling emergence studies were made on seed harvested from four different umbel positions. Although heavier seeds were produced from primary umbels than from other umbel orders, they were less viable as measured by seedling emergence in the glasshouse. The rate of emergence was decreased with increasing umbel order i.e. with later seed development: this was reflected in subsequent seedling weights, with seedlings from quarternary umbel seeds being about half the weight of those from primary umbel seeds. The upper temperature limit for dark germination was only slightly affected by umbel order, with quarternary umbel seeds being the most thermo-inhibited.Abbreviations BA N⁶-benzyladenine - GA_4/7 a mixture of gibberellins A₄ and A₇ - SD8339 6-benzyl-amino-9-(tetrahydropyran-2-yl)-9H-purine     

Quantitative and qualitative changes in the endoplasmic reticulum of barley aleurone layers

Changes in the level of the endoplasmicreticulum (ER) marker enzyme cytochrome-c reductase (EC 1.6.2.1) were followed with time of imbibition of de-embryonated half-seeds of barley (Hordeum vulgare L.) and the subsequent incubation of their aleurone layers in gibberellic acid (GA₃) and H₂O. During imbibition there is an increase in the level of cytochrome-c-reductase activity and in the amount of 280-nm absorbance associated with this enzyme. When aleurone layers are incubated for a further 42 h in water, there is a doubling of the cytochrome-c-reductase activity. In GA₃, the activity of cytochrome-c reductase reaches a maximum at 24 h of incubation and thereafter falls to below 70% of its level at the beginning of the incubation period. Changes in the cytochrome-c-reductase activity correlate with changes in the fine structure of the aleurone cell. The ER isolated in low Mg²⁺ from aleurone layers incubated in buffer for up to 18 h has buoyant density of 1.13–1.14 g cc^-1 while that from layers incubated in GA₃ for 7.5–18 h has a density of 1.11–1.12 g cc^-1. The -amylase (EC3.2.1.1) isolated with the organelle fraction by Sepharose gel filtration is associated with the ER on isopycnic and rate-zonal density gradients, and its activity can be enhanced by Triton X-100. The soluble -amylase fraction from Separose-4B columns, on the other hand, is not Triton-activated but is acid-labile. Acid phosphatase (EC3.1.3.2) is distributed in at least three peaks on isopycnic gradients. In low Mg²⁺ the second peak of activity has a density of 1.12 g cc^-1 in GA₃-treated tissue and 1.13–1.14 g cc^-1 in H₂O-treated tissue. With high-Mg²⁺ buffers, this peak of phosphatase activity disappears. Acid-phosphatase activity is not enhanced by Triton X-100 nor is it acid-labile.Abbreviations EDTA ethylenediaminetetraacetic acid - ER endoplasmic reticulum - GA gibberellin - GA₃ gibberellic acid     

Chronic Exposure of NG108-15 Cells to Amyloid β Peptide (Aβ1–42) Abolishes Calcium Influx via N-Type Calcium Channels

We investigated whether amyloid--peptide (A_1–42) has an effect on the elevations of the intracellular concentration of Ca²⁺ ions ([Ca²⁺]_i) induced by depolarizations of NG108-15 cells and on related Ca²⁺ channels. A_1–42 (10-1000 nM) had no immediate effect on depolarization-induced [Ca²⁺]_i elevations. [Ca²⁺]_i increases were slightly diminished in cells grown in the presence of 100 or 1000 nM A_1–42. Nifedipine (1 M) reduced these elevations equally in cells grown in the absence or presence of A_1–42. In contrast, the ability of -conotoxin GVIA to diminish the depolarization-induced [Ca²⁺]_i responses became lost in cells grown in the presence of 100 nM A_1–42. This indicates that the influx of calcium through the N-type Ca²⁺ channels was compromised by the chronic exposure of cells to a submicromolar concentration of A_1–42, presumably because of impairement of their function or diminished expression. This may be important in the pathogeny of Alzheimer's dementia in view of the pivotal role of N-type Ca²⁺ channels in neurotransmitter release.     

Somatic embryogenesis and regeneration of plants in the bamboo Dendrocalamus strictus

Somatic embryogenesis leading to plant regeneration has been achieved in the bamboo, Dendrocalamus strictus, by culturing seeds (caryopses) on B₅ basal medium supplemented with 2,4-dichlorophenoxyacetic acid. Callus cultures obtained from the embryonal end of the seeds differentiated chlorophyllous embryoids. On transfer to a germination medium (B₅ liquid, sucrose, indolebutyric acid, and -naphthaleneacetic acid) 40% of the embryoids developed into plantlets. Further development of the plantlets occured on B₅ liquid medium (half strength) + sucrose (1%) + IBA (5 × 10^–7M) + NAA (10^–7M).Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - IBA Indolebutyric acid - NAA -naphthaleneacetic acid     

Responses of florence fennel (Foeniculum vulgare azoricum) seeds to light,temperature and gibberellin A4/7

The percentage and the rate of germination of seeds of three varieties of Florence fennel was higher in the dark than in the light, the high temperature cut-off points being between 27.2 and 29.4°C. The optimum temperature for germination was between 20 and 25°C. Seeds of all three varieties responded to incubation in solutions containing gibberellin A_4/7 mixture (GA_4/7; Regulex), giving higher germination in the light at temperatures from 20 to 30°C. Seeds steeped for 4 h at 25°C or for 24 h at 5°C in GA_4/7 solutions gave a higher percentage and increased rate of emergence as compared with untreated dry seeds, when sown in compost at 25°C; steeping in water alone was also beneficial. In general, drying the treated seeds before sowing reduced the rate but sometimes increased the percentage of germination as compared with seeds sown when still moist. Seeds harvested from secondary umbels of var. Zefa fino germinated better both in the light and dark than those taken from primary umbels.Abbreviations GA_4/7 a commercial mixture of the gibberellins A₄ and A₇ (trade name Regulex)     

Cultivation of cell cultures of Berberis wilsonae in 20-l airlift bioreactors

Suspension cultures of Berberis wilsonae produce 4 berberine-type alkaloids: berberine, palmatine, columbamine and jatrorrhizine. In particular the formation of the phenolic alkaloids columbamine and jatrorrhizine and of berberine proves to be dependent on the concentration of dissolved oxygen. With higher aeration rates, berberine and jatrorrhizine yields can be increased considerably. Thus we reached an alkaloid yield of more than 3 g × 1^–1 with 50% dissolved oxygen tension in the medium. As far as we know this is one of the best results in fermenting of alkaloid-producing cell cultures.Abbreviations pO₂ dissolved oxygen concentration in % saturation (using air) - HPLC high-performance liquid chromatography - vvm volume air × volume medium^–1 × minute^–1 - rpm revolutions per minute - IAA indole-3-acetic acid - 2,4-D 2,4-dichlorophenoxy acetic acid     

Regulation of aplanospore germination in Vaucheria

Germination of aplanospores in Vaucheria longicaulis Hoppaugh var. macounii Blum proceeds through three stages of development. Stage I begins with the initiation of germination and lasts approx. 2 h. During this stage germinating filaments grow at an accelerated rate (266 ± 12 m · h^–1). Stage II is characterized by a sharp decline in the growth rate of germinating filaments (96 ± 4 m · h^–1) and lasts 4 h. This is followed, during the next 4 h, by a recovery in the growth rate (168 ± 8 m · h^–1) of germinating filaments, stage III. Growth rates stabilize and remain unchanged during subsequent development (Oliveira and Fitch, 1988, J. Submicrosc. Cytol. Pathol. 20, 397–406). The Ca²⁺-influx modulators LaCl₃, nifedipine and methyl 1,4-dihydro-2,6-dimethyl-3-nitro-4 (2-trifluoromethylphenyl)-pyridine-5-carboxylate (Bay K-8644), the ionophore calcimycin (A23187), the intracellular Ca²⁺-release antagonist 8-N-N'-(diethylamino)-octyl-3,4, 5-trimethoxybenzoate (TMB-8), the Ca²⁺-uptake inhibitor ruthenium red and the phosphoinositide-cycle modulators LiCl and myo-inositol show that the events required for the initiation are distinct from those required for the completion of each stage of germination. These studies in conjunction with microinjection of germinating filaments with inositol 1,4,5-trisphosphate, the natural ligand for Ca²⁺ release from Ca-storing organelles (endoplasmic reticulum, vacuole), and treatment with chlorotetracycline (CTC), to visualize the distribution of membrane-bound Ca²⁺ reveal that both the initiation and completion of each stage of germination are controlled by Ca²⁺ signals which are restricted to well-defined time intervals and are modulated by the origin (source) of Ca²⁺.Abbreviations BAPTA 1,2-bis(2-aminophenoxy)ethane-N,N,N,N-tetraacetic acid - Bay K-8644 methyl 1,4-dihydro-2,6-dimethyl-3-nitro-4(2-trifluoromethylphenyl)-pyridine-5-carboxylate - CTC chlorotetracycline - InsP₃ inositol 1,4,5-trisphosphate - RR ruthenium red - TMB-8 8-N-N-(diethylamino)-octyl-3,4,5-trimethoxybenzoate The author wishes to express his gratitude to the technical group of the Immunocytochemistry Unit for their help with the microinjection studies. This work was supported by a grant from the Natural Sciences and Engineering Research Council of Canada (grant A-7844).     

Effect of temperature and surface potential on the electrogenic proton uptake in the QB site of the Rhodobacter sphaeroides photosynthetic reaction center: QA −. B −. → QAQBH2 transition

Direct electrometry was used to study the light-induced voltage changes in the Rhodobacter sphaeroides chromatophores adsorbed to a phospholipid-impregnated nitrocellulose film. After the second laser flash, a fast increase in the voltage associated with charge separation was followed by a slower increase attributed to the proton uptake in the Q_B site of the photosynthetic reaction centers. Kinetics and relative amplitudes of these voltage changes attributed to the Q_A ^–. _B ^–. Q_AQ_BH₂ transition, were measured as a function of pH and temperature between +4 and +40 °C. The kinetics can be approximated by a single exponent above +23 °C (100 µs at +25 °C, pH 7.2), whereas below this temperature, it was a good fit of two exponential approximation (65 µs and 360 µs with similar contributions at +10 °C, pH 7.2). The faster component diminished with an apparent pK 8.5, whereas the slower one was maintained at a constant level until pH 9.5 and then decreased. The calculated activation energy from the temperature dependence of the slower component (55 – 65 kJ/mol) was much higher than that of the faster component (< 10 kJ/mol). The two voltage components can be attributed to the transfer of the first (faster component) and the second (slower component) proton from the reaction center surface to Q_B. We suggested that higher activation energy of the slower component was due to a conformational change in the reaction center kinetically coupled to the second proton transfer to Q_BH^–.The faster component diminished in the presence of 1 M KCl, with an apparent pK 7.5. To explain this observation, we assume that: (i) the midpoint potential of the Q_A/Q_A ^–. redox pair was higher in 1 M KCl because of the reduced surface potential of chromatophores; (ii) the midpoint potential of the Q_B ^–./Q_BH^–. redox pair was insensitive to the surface potential change; (iii) the equilibrium constant of the reaction Q_A ^–.Q_B ^–. Q_AQ_BH^– decreased at high ionic strength.     

Formation of plantlets through somatic embryogeny in the Himalayan blue poppy,Meconopsis simplicifolia (Papaveraceae)

Summary Exuberant and subculturable calli could be induced from only hypocotyl and leaf segments of ca 4-month-old seedlings of Meconopsis simplicifolia cultured on Murashige & Skoog's medium supplemented with 10^–6M kinetin + 10^–5M -naphthalene acetic acid. Suspension cultures were initiated from the calli in a similar medium but with 10^–5M 2,4-dichlorophenoxy acetic acid in place of -naphthalene acetic acid. In ca 80% of the suspension cultures somatic embryos differentiated freely (80–85%) as well as on the surface of small clumps of tissue (15–20%). Somatic embryos that developed beyond heart-shaped stage were transferred to agar-solidified Murashige & Skoog's medium free of growth substances. When maintained in 10 h light and 14 h dark the somatic embryos developed into plantlets bearing cauline leaves. From seed sowing to raising normal plantlets via callus required 28 weeks; on average 80 plantlets were obtained from one explant in three passages.Abbreviations 2,4-D 2,4-dichlorophenoxy acetic acid - FAA formalin-acetic acid-alcohol - GA₃ gibberellic acid - Kn kinetin - MS Murashige & Skoog's medium (Murashige and Skoog 1962) - NAA -naphthalene acetic acid     

Flight of the honey bee VI: energetics of wind tunnel exhaustion flights at defined fuel content,speed adaptation and aerodynamics

To gain information on extended flight energetics, quasi-natural flight conditions imitating steady horizontal flight were set by combining the tetheredflight wind-tunnel method with the exhaustion-flight method. The bees were suspended from a two-component aerodynamic balance at different, near optimum body angle of attack and were allowed to choose their own speed: their body mass and body weight was determined before and after a flight; their speed, lift, wingbeat frequency and total flight time were measured throughout a flight. These values were used to determine thrust, resultant aerodynamic force (magnitude and tilting angle), Reynolds number, total flight distance and total flight impulse. Flights in which lift was body weight were mostly obtained. Bees, flown to complete exhausion, were refed with 5, 10, 15 or 20 l of a 1.28-mol·l^-1 glucose solution (energy content w=18.5, 37.0, 55.5 or 74.0 J) and again flown to complete exhaustion at an ambient temperature of 25±1.5°C by a flight of known duration such that the calculation of absolute and relative metabolic power was possible. Mean body mass after exhaustion was 76.49±3.52 mg. During long term flights of 7.47–31.30 min similar changes in flight velocity, lift, thrust, aerodynamic force, wingbeat frequency and tilting angle took place, independent of the volume of feeding solution. After increasing rapidly within 15 s a more or less steady phase of 60–80% of total flight time, showing only a slight decrease, was followed by a steeper, more irregular decrease, finally reaching 0 within 20–30 s. In steady phases lift was nearly equal to resultant aerodynamic force; tilting angle was 79.8±4.0°, thrust to lift radio did not vary, thrust was 18.0±7.4% of lift, lift was somewhat higher/equal/lower than body mass in 61.3%, 16.1%, 22.6% of all totally analysable flights (n=31). The following parameters were varied as functions of volume of feeding solution (5–20 l in steps of 5 l) and energy content. (18.5–74.0 J in steps of 18.5 J): total flight time, velocity, total flight distance, mean lift, thrust, mean resultant aerodynamic force, tilting angle, total flight impulse, wingbeat frequency, metabolic power and metabolic power related to body mass, the latter related to empty, full and mean (=100 mg) body mass. The following positive correlations were found: L=1.069·10^-9 f ^2.538; R=1.629·10^-9 f ^2.464; P _m=7.079·10^-8 f ^2.456; P _m=0.008v+0.008; P _m=18.996L+0.022; P _m=19.782R+0.021; P _m=82.143T+0.028; P _m=1.245·bm _f ^1.424 ; P _{mrel e}=6.471·bm _f ^1.040 ; =83.248+0.385. The following negative correlations were found: V=3.939–0.032; T=1.324·10^-4–0.038·10^-4. Statistically significant correlations were not found in T(f), L(), R(), f(), P _m(bm _e), P _{m rel e}(bm _e), P _{m rel f}(bm _e), P _{m rel f}(bm _f).Abbreviations A(m²) frontal area - bl(m) body length - bm(mg) body mass - c(mol·1^-1) glucose concentration of feeding solution - c _D (dimensionless) drag coefficient, related to A - D(N) drag - F _w(N) body weight - F _wp weight of paper fragment lost at flight start - f wingbeat frequency (s^-1) - g(=9.81 m·s^-2) gravitational acceleration - I(Ns)=R(t) dt total impulse of a flight - L(N) lift vertical sustaining force component - P _m(J·s^-1=W) metabolic power - P_{m ret} (W·g^-1) metabolic power, related to body mass - R(N) resultant aerodynamic force - Re v·bl·v ^-1 (dimensionless) Reynolds number, related to body length - s(m) v(t) dt virtual flight distance of a flight - s(km) total virtual flight distance - T (N) thrust horizontal force component of horizontal flight - T _a (°C) ambient temperature - t(s) time - t _tot (s or min) total flight time - v(m·s^-1) flight velocity - v(l) volume of feeding solution - W (J) energy and energy content of V - ( °) body angle of attack between body longitudinal axis and flow direction - ( °) tilting angle ( 90°) between R and the horizont in horizontal flight v(=1.53·10^-5m²·s^-1 for air at 25°) kinematic viscosity - (=1.2 kg·m^-3 at 25°C) air density     

Mathematical modeling of mixing in a horizontal rotating tubular bioreactor: “Simple flow” model

The construction of the horizontal rotating tubular bioreactor (HRTB) represents a combination of a thin-layer bioreactor and a biodisc reactor. The bioreactor was made of a plastic tube whose interior was divided by the O-ring shaped partition walls. For the investigation of mixing properties in HRTB the temperature step method was applied. The temperature change in the bioreactor as a response to a temperature step in the inlet flow was monitored by six Pt-100 sensors (t ₉₀ response time 0.08 s and resolution 0.002 °C) which were connected with an interface unit and personal computer. Mixing properties of the bioreactor were modeled using the modified tank in series concept which divided the bioreactor into ideally mixed compartments. A mathematical mixing model with simple flow was developed according to the physical model of the compartments network and corresponding heat balances. Numerical integration of an established set of differential equations was done by the Runge-Kutt-Fehlberg method. The final mathematical model with simple flow contained four adjustable parameters (N1,Ni, F _cr andF _p ) and five fixed parameters.List of Symbols A _u m² inner surface of bioreactor's wall - A _ui m² i-th part of inner surface of bioreactor's wall - A _v m² outlet surface of bioreactor's wall - A _vi m² i-th part of outlet surface of bioreactor's wall - C _p kJ kg^–1 K^–1 heat capacity of liquid - C _pr kJ kg^–1 K^–1 heat capacity of bioreactor's wall - D h^–1 dilution rate - E °C °C^–1 h^–1 error of mathematical model - F _cr dm³s^–1 circulation flow in the model - F _p dm³ s^–1 back flow in the model - F _t dm³s^–1 inlet flow in the bioreactor - I °C intensity of temperature step, the difference in temperature between the temperature of the inlet liquid flow and the temperature of liquid in the bioreactor before the temperature step - K1 Wm^–2K^–1 heat transfer coefficient between the liquid and bioreactor's wall - K2 Wm^–2K^–1 heat transfer coefficient between the bioreactor's wall and air - m _s kg mass of bioreactor's wall - L m length of bioreactor - L _k m wetted perimeter of bioreactor - n min^–1 rotational speed of bioreactor - n _s number of temperature sensors - N1 number of cascades - Ni number of compartments inside the cascade - Nu Nusselt number - Pr Prandtl number - r _u m inner diameter of bioreactor - r _v m outside diameter of bioreactor - Re Reynolds number - s(t) step function - t s time - T °C temperature - T _c °C calculated temperature - T _m °C measured temperature - T _N1,Ni °C temperature of liquid in a defined compartment inside cascade - T _N1,S °C temperature of defined part of bioreactor's wall - T _S °C temperature of bioreactor's wall - T _v °C temperature of liquid in bioreactor - T _z °C temperature of surrounding air - V _t dm³ volume of liquid in the bioreactor Greek Symbols kJm^–1s^–1 K^–1 thermal conductivity of liquid in the bioreactor - kgm^–3 density of liquid in the bioreactor - m²s^–1 kinematic viscosity of liquid in the bioreactor Matrix Coefficient B - C - D - E B+C+D - G1 - G2 - G3 - A _ui - A _vi - Q ₁ - Q ₂ - Q ₃      

Photosystem II reaction centres stay intact during low temperature photoinhibition

Photoinhibition of photosynthesis was studied in intact barley leaves at 5 and 20°C, to reveal if Photosystem II becomes predisposed to photoinhibition at low temperature by 1) creation of excessive excitation of Photosystem II or, 2) inhibition of the repair process of Photosystem II. The light and temperature dependence of the reduction state of Q_A was measured by modulated fluorescence. Photon flux densities giving 60% of Q_A in a reduced state at steady-state photosynthesis (300 mol m^–2s^–1 at 5°C and 1200 mol m^–2s^–1 at 20°C) resulted in a depression of the photochemical efficiency of Photosystem II (F_v/F_m) at both 5 and 20°C. Inhibition of F_v/F_m occurred with initially similar kinetics at the two temperatures. After 6h, F_v/F_m was inhibited by 30% and had reached steady-state at 20°C. However, at 5°C, F_v/F_m continued to decrease and after 10h, F_v/F_m was depressed to 55% of control. The light response of the reduction state of Q_A did not change during photoinhibition at 20°C, whereas after photoinhibition at 5°C, the proportion of closed reaction centres at a given photon flux density was 10–20% lower than before photoinhibition.Changes in the D1-content were measured by immunoblotting and by the atrazine binding capacity during photoinhibition at high and low temperatures, with and without the addition of chloramphenicol to block chloroplast encoded protein synthesis. At 20°C, there was a close correlation between the amount of D1-protein and the photochemical efficiency of photosystem II, both in the presence or in the absence of an active repair cycle. At 5°C, an accumulation of inactive reaction centres occurred, since the photochemical efficiency of Photosystem II was much more depressed than the loss of D1-protein. Furthermore, at 5°C the repair cycle was largely inhibited as concluded from the finding that blockage of chloroplast encoded protein synthesis did not enhance the susceptibility to photoinhibition at 5°C.It is concluded that, the kinetics of the initial decrease of F_v/F_m was determined by the reduction state of the primary electron acceptor Q_A, at both temperatures. However, the further suppression of F_v/F_m at 5°C after several hours of photoinhibition implies that the inhibited repair cycle started to have an effect in determining the photochemical efficiency of Photosystem II.Abbreviations CAP D-threochloramphenicol - F₀ and F ₀ fluorescence when all Photosystem II reaction centres are open in dark- and light-acclimated leaves, respectively - F_m and F _m fluorescence when all Photosystem II reaction centres are closed in dark- and light-acclimated leaves, respectively - F_s fluorescence at steady state - Q_A the primary, stable quinone acceptor of Photosystem II - q_N non-photochemical quenching of fluorescence - q_P photochemical quenching of fluorescence     

Diffusion of sucrose in xanthan gum solutions

Molecular diffusion of solutes, like sucrose in the xanthan gum fermentation, is important in order to understand the complex behavior of mass transfer mechanisms during the process. This work was focused to determine the diffusion coefficient of sucrose, a carbon source for xanthan production, using similar sucrose and xanthan concentrations to those occurring in a typical fermentation. The diaphragm cell method was used in experimental determinations. The data showed that diffusion coefficient of sucrose significantly decreases when xanthan gum concentration increases. Theoretical and semiempirical models were used to predict sucrose diffusivity in xanthan solutions. Molecular properties and rheological behavior of the system were considered in the modeling. The models tested fitted well the behavior of experimental data and that reported for oxygen in the same system.List of Symbols A constant in eq. (5) - C _pg cm^–3 polymer concentration - D cm² s^–1 diffusivity - D _ABcm² s^–1 diffusivity of A through liquid solvent - D _APcm² s^–1 diffusivity of A in polymer solution - D _AWcm² s^–1 diffusivity of A in water - D _Pcm² s^–1 diffusivity of polymer in liquid solvent - E _D gradient of the activation energy for diffusion - H _P hydratation factor of the polymer in water (g of bound water/g of polymer) - K dyn sⁿ cm^–2 consistency index - K ₁ constant in eq. (5) - K _P overall binding coefficient [g of bound solute/cm³ of solution]/[g of free solute/cm³ of polymer free solution] - n flow behavior index - M _Bg g mol^–1 molucular weight of liquid solvent - M _Pg g mol^–1 molecular weight of the polymer - M _Sg g mol^–1 Molecular weight of polymer solution (= M _BX_B+M_PX_P) - R cm³ atm g mol^–1 K^–1 ideal gas law constant - T K absolute temperature - V _Bcm³ g mol^–1 molar volume of liquid solvent - V _Pcm³ g mol^–1 molar volume of polymer - V _Scm³ g mol^–1 molar volume of polymer solution - X _B solvent molar fraction - X _P polymer molar fraction - polymer blockage shape factor - _P volume fraction of polymer in polymer solution - g cm^–1 s^–1 viscosity - _ag cm^–1 s^–1 apparent viscosity of the polymer solution - _icm³ g^–1 intrinsic viscosity - ₀ g cm^–1 s^–1 solvent viscosity - _Pg cm^–1 s^–1 polymer solution viscosity - _R relative viscosity (= / ₀) - ₌₀ g cm^–1 s^–1 viscosity of polymer solution obtained at zero shear rate - ₀ g cm^–3 water density     

The role of ion antiporters in the maintenance of intracellular pH in rat vascular smooth muscle cells

Vascular smooth muscle intracellular pH is maintained by the Na⁺/H⁺ and Cl^–/HCO ₃ ^– antiporters. The Na⁺/H⁺ exchanger is a major route of H⁺ extrusion in most eukaryotic cells and is present in vascular smooth muscle cells in a similar capacity. It extrudes H^– into the extracellular space in exchange for Na⁺. The Cl^–/HCO ₃ ^– exchanger plays an analogous role to lower the pH of vascular smooth muscle cells when increases in intracellular pH occur. Its activity has also been demonstrated in A7r5 and A10 vascular smooth muscle cells. The Na⁺/H⁺ exchanger is regulated by a number of agents which act through inositol trisphosphate/diacylglycerol, to stimulate the antiporter. Calcium-calmodulin dependent protein kinase may also activate the antiporter in vivo. Phosphorylation of the Cl^–/HCO ₃ ^– exchanger has also been observed but its physiological role is not known. Both these antiporters exist in the plasma membrane as integral proteins with free acidic cytoplasmic termini. These regions may be important in sensing changes in intracellular pH, to which these antiporters respond.Abbreviations CaM Calmodulin - DCCD Dicylohexyl-Carbodiimide - DG Diacylglycerol - DIDS-4 4-Diisthiocyanostilbene-2,2-Disulfonic Acid - IP₃ Inositol Trisphosphate - PKC protein Kinase C - SITS-4 4-Acetamido-4-Isothiocyanstilbene-2,2-Disulfonate - VSMC Vascular Smooth Muscle Cell     

Cycling of inorganic and organic sulfur in peat from Big Run Bog,West Virginia

Total S concentration in the top 35 cm of Big Run Bog peat averaged 9.7 mol·g — wet mass^–1 (123 mol·g dry mass^–1). Of that total, an average of 80.8% was carbon bonded S, 10.4% was ester sulfate S, 4.5% was FeS₂­S, 2.7% was FeS­S, 1.2% was elemental S, and 0.4% was SO₄ ^2–­S. In peat collected in March 1986, injected with³⁵S­SO₄ ^2– and incubated at 4 °C, mean rates of dissimilatory sulfate reduction (formation of H₂S + S⁰ + FeS + FeS₂), carbon bonded S formation, and ester sulfate S formation averaged 3.22, 0.53, and 0.36 nmol·g wet mass^–1·h^–1, respectively. Measured rates of sulfide oxidation were comparable to rates of sulfate reduction. Although dissolved SO₄ ^2– concentrations in Big Run Bog interstitial water (< 200 µM) are low enough to theoretically limit sulfate reducing bacteria, rates of sulfate reduction integrated throughout the top 30–35 cm of peat of 9 and 34 mmol·m^–2·d^–1 (at 4 °C are greater than or comparable to rates in coastal marine sediments. We suggest that sulfate reduction was supported by a rapid turnover of the dissolved SO₄ ^2– pool (average turnover time of 1.1 days). Although over 90% of the total S in Big Run Bog peat was organic S, cycling of S was dominated by fluxes through the inorganic S pools.     

An investigation of the light-induced spin polarization in reaction centres of Rhodobacter sphaeroides Y

Low temperature spin polarized X- and K-band transient EPR spectra of the state P^+.(Q _A ^–. Mn²⁺) in reaction centres of Rhodobacter sphaeroides Y are presented. A strong component with a spectral width of 0.4 mT appears near g = 2 and a weak component with a width of 570 mT is observed between g 1 – 6. The narrow spectrum is primarily due to P^+. and the broad component is assigned to (Q _A ^–. Mn²⁺). Both signals are polarized as a result of the correlation of the unpaired spins on P ₈₆₅ ^+. and (Q _A ^–. Mn²⁺). At times < 200 ns after the laser the P^+. contribution has an AEA (A = absorption, E = emission) polarization pattern at both X- and K-band. The K-band spectrum has a somewhat higher spectral resolution and three distinct time constants in the polarization decay. At later times, the initial AEA pattern relaxes to a purely absorptive spectrum. The decay of the spin polarized (Q _A ^–. Mn²⁺) signal is about two orders of magnitude slower than that of P ₈₅₄ ^+. . However, its rise time is roughly the same as the decay of the AEA pattern near g = 2. Both contributions to the spectra can be observed up to temperatures above 200 K with little or no change in form. However, the transition from the early to late signal near g = 2 is faster at higher temperatures as a result of faster spin relaxation. The dominant relaxation rate follows Arrhenius behaviour. However, the fast component observed at K-band is independent of temperature. The effect of the magnetic properties of the metal on the spin polarization and the expected differences between the spectra of P^+.(Q _A ^–. Mn²⁺) and P^+.(Q _A ^–. Fe²⁺) are discussed.     

The effect of endogenous and externally supplied nitrate on nitrate uptake and reduction in sugarbeet seedlings

The pericarp of the dormant sugarbeet fruit acts as a storage reservoir for nitrate, ammonium and -amino-N. These N-reserves enable an autonomous development of the seedling for 8–10 d after imbibition. The nitrate content of the seed (1% of the whole fruit) probably induces nitrate-reductase activity in the embryo enclosed in the pericarp. Nitrate that leaks out of the pericarp is reabsorbed by the emerging radicle. Seedlings germinated from seeds (pericarp was removed) without external N-supply are able to take up nitrate immediately upon exposure via a low-capacity uptake system (v_max = 0.8 mol NO ₃ ^- ·(g root FW)^–1·h^–1; K_s = 0.12 mM). We assume that this uptake system is induced by the seed nitrate (10 nmol/seed) during germination. Induction of a high-capacity nitrate-uptake system (v_max = 3.4 mol NO ₃ ^- ·(g root FW)^–1·h^–1; K_s = 0.08 mM) by externally supplied nitrate occurs after a 20-min lag and requires protein synthesis. Seedlings germinated from whole fruits absorb nitrate via a highcapacity uptake mechanism induced by the pericarp nitrate (748 nmol/pericarp) during germination. The uptake rates of the high-capacity system depend only on the actual nitrate concentration of the uptake medium and not on prior nitrate pretreatments. Nitrate deprivation results in a decline of the nitrate-uptake capacity (t_1/2 of v_max = 5 d) probably caused by the decay of carrier molecules. Small differences in K_s but significant differences in v_max indicate that the low- and high-capacity nitrate-uptake systems differ only in the number of identical carrier molecules.Abbreviations NR nitrate reductase - pFPA para-fluorophenylalanine This work was supported by a grant from Bundesministerium für Forschung und Technologie and by Kleinwanzlebener Saatzucht AG, Einbeck.