Applications of universal probe on DNA hybridization

A convenient method for DNA hybridization termed "Universal probe" is described which is based on the principle of sandwich hybridization. This system consists of two probes: primary probe which is single-stranded DNA prepared from a chimeric phage-plasmid vector containing the complementary sequence to a target; and labeled secondary probe which has an opposite strand of the primary probe without the complementary sequence. By use this universal probe human beta-globin gene was able to be detected on Southern blots of genomic DNA. A potential advantage of this method is that the single-stranded primary probe is prepared easily by the chimeric phage-plasmid vector system and tedious labeling is not needed each time.     

A two-step hybridization method for chemiluminescent detection of single copy genes.

We have developed a technique for the chemiluminescent detection of single copy genes that eliminates the high backgrounds and problems with probe labeling associated with existing methods. The procedure employs a primary hybridization of single-stranded probe DNA to immobilized target DNA, a secondary hybridization with a covalently cross-linked oligonucleotide-alkaline phosphatase conjugate, followed by incubation in the chemiluminescent substrate AMPPD and detection on x-ray film. The key to the success of this method is that the primary probe contains a region complementary to the target DNA as well as to the oligonucleotide sequence of the secondary probe-alkaline phosphatase conjugate. Here we report our results using the two-step hybridization procedure to detect single copy genes from genomic Southern blots.     

Preparation of enzyme-conjugated DNA probe and application to the universal probe system.

A general procedure for the cross-linking of enzyme to DNA has been developed for use as a nonradioactive probe. In this method, DNA is transaminated with diaminopropane to introduce primary amino groups into the cytosine residues. Then the amino groups are converted to thiol groups using a heterobifunctional cross-linker. The thiolated DNA is conjugated with the maleimide-introduced enzyme. With this method, alkaline phosphatase was cross-linked to a single-stranded DNA (sspUCRf1). The conjugate was able to detect 5 pg of target DNA (pUCf1 plasmid, 3.2 kbp) fixed onto the nitrocellulose membrane, using a colorimetric assay. The enzyme-conjugated DNA was applied to "the universal probe system," which consisted of two single-stranded DNA probes (a primary probe and a labeled secondary probe). Using alkaline phosphatase-conjugated sspUCRf1 DNA as the secondary probe, the c-myc gene and HBV DNA were detected effectively on Southern and dot-blot hybridization.     

Simple chemical synthesis and hybridization properties of non-radioactive DNA probes

A simple chemical method for the synthesis of non-radioactive DNA probes is described: triazolyl-containing sequences were built by incorporation of 4-triazolylpyrimidin-2-ones instead of cytidines during oligodeoxyribonucleotide synthesis. The activating triazolyl groups were then displaced by a diamine which was further derivatized by a label, such as biotin. Synthesized DNA probes were oligonucleotides complementary to a cloned human antithrombin III DNA sequence. These probes, containing the same label at different positions of the sequence, were hybridized to their target DNA immobilized on nitrocellulose. Their hybridization specificity and stability were studied. Hybrid detection was performed either colorimetrically by the streptavidin-alkaline phosphatase-based system or by autoradiography after 5'-32P labeling of the probes: 15 fmol (0.05 microgram) of complementary sequence could be visualized in the two cases.     

Covalent DNA immobilization on polymer-shielded silver-coated quartz crystal microbalance using photobiotin-based UV irradiation.

The use of a commercial, silver-coated quartz crystal microbalance (QCM) as a disposable, low-cost, and reliable DNA sensor is presented. This is an incorporation of polymer-based silver electrode shielding and photochemistry-based surface modification for covalent DNA immobilization. To prevent undesired oxidation, the silver electrodes are coated with thin polystyrene films. The polymer surfaces are then modified by a photoreactive biotin derivative (photobiotin) under UV irradiation. The resulting biotin residues on the polymer-shielded surface react with a tetrameric avidin. Consequently a biotin-labeled DNA probe can be immobilized through a biotin-avidin-biotin bridge. A 14-mer single-stranded biotin-DNA probe and a 70-mer single-stranded DNA fragment containing complementary or noncomplementary sequences are used as a model system for DNA hybridization assay on the proposed sensors. The shielding ability of the polystyrene coatings after photo irradiation is investigated. The DNA probe binding capacity, hybridization efficiency, and kinetics are also investigated.     

Computer simulation study of molecular recognition in model DNA microarrays

DNA microarrays have been widely adopted by the scientific community for a variety of applications. To improve the performance of microarrays there is a need for a fundamental understanding of the interplay between the various factors that affect microarray sensitivity and specificity. We use lattice Monte Carlo simulations to study the thermodynamics and kinetics of hybridization of single-stranded target genes in solution with complementary probe DNA molecules immobilized on a microarray surface. The target molecules in our system contain 48 segments and the probes tethered on a hard surface contain 8-24 segments. The segments on the probe and target are distinct and each segment represents a sequence of nucleotides ( approximately 11 nucleotides). Each probe segment interacts exclusively with its unique complementary target segment with a single hybridization energy; all other interactions are zero. We examine how the probe length, temperature, or hybridization energy, and the stretch along the target that the probe segments complement, affect the extent of hybridization. For systems containing single probe and single target molecules, we observe that as the probe length increases, the probability of binding all probe segments to the target decreases, implying that the specificity decreases. We observe that probes 12-16 segments ( approximately 132-176 nucleotides) long gave the highest specificity and sensitivity. This agrees with the experimental results obtained by another research group, who found an optimal probe length of 150 nucleotides. As the hybridization energy increases, the longer probes are able to bind all their segments to the target, thus improving their specificity. The hybridization kinetics reveals that the segments at the ends of the probe are most likely to start the hybridization. The segments toward the center of the probe remain bound to the target for a longer time than the segments at the ends of the probe.     

Detection of DNA via an ion channel switch biosensor

Detection of DNA by an ion channel switch biosensor has been demonstrated in a model system, using single-stranded oligonucleotide sequences of 52-84 bases in length. Two different biotinylated probes are bound, via streptavidin, either to the outer region of a gramicidin ion channel dimer or to an immobilized membrane component. The ion channels are switched off upon detection of DNA containing complementary epitopes to these probes, separated by a nonbinding region, at nanomolar levels. The DNA cross-links the ion channel to the immobilized species, preventing ions passing through the channel. Addition of DNase I after the target DNA has been added switches the ion channels on. The DNA response is dependent on the rate of hybridization of the individual probes to their complementary epitopes, as shown by using a single probe against DNA containing a repeat of the complementary epitope. These results were correlated with hybridization rates determined using surface plasmon resonance (BIAcore 2000), and with free energies of dimer formation for the probes.     

Preparation of single-stranded deoxyribonucleic acid probes using an immobilized template

A new method for the easy preparation of specific single-stranded DNA fragments is presented. Recombinant M13 DNA containing the strand complementary to the sequence of interest is made partially double-stranded by elongating a conventional M13 sequencing primer. Following linearization by enzymatic digestion downstream from the insert (relative to priming site), this DNA is coupled to diazotized paper through its single-stranded (vector) portion. Subsequent denaturation of the double-stranded region generates an immobilized template strand. Successive runs of primed syntheses of the (desired) complementary strand can be realized using the same template. The copies are easily isolated by release upon denaturation. DNA probes prepared by this method have proven to be valuable tools for gene analysis.     

Strand-specific fluorescence in situ hybridization: the CO-FISH family

The ability to prepare single-stranded chromosomal target DNA allows innovative uses of FISH technology for studies of chromosome organization. Standard FISH methodologies require functionally single-stranded DNAs in order to facilitate hybridization between the probe and the complementary chromosomal target sequence. This usually involves denaturation of double-stranded probes to induce temporary separation of the DNA strands. Strand-specific FISH (CO-FISH; Chromosome Orientation-FISH) involves selective removal of newly replicated strands from DNA of metaphase chromosomes which results in single-stranded target DNA. When single-stranded probes are then hybridized to such targets, the resulting strand-specific hybridization is capable of revealing a level of information previously unattainable at the cytogenetic level. Mammalian telomeric DNA consists of tandem repeats of the (TTAGGG) sequence, oriented 5'-->3' towards the termini of all vertebrate chromosomes. Based on this conserved structural organization, CO-FISH with a telomere probe reveals the absolute 5'-->3' orientation of DNA sequences with respect to the pter-->qter direction of chromosomes. Development and various applications of CO-FISH will be discussed: detection of cryptic inversions, discrimination between telomeres produced by leading- versus lagging-strand synthesis, and replication timing of mammalian telomeres.     

Colorimetric detection of the tuberculosis complex using cycling probe technology and hybridization in microplates

Cycling probe technology (CPT) is a simple signal amplification method for the detection of specific target DNA sequences. CPT uses a chimeric DNA-RNA-DNA probe that is cut by RNase H when bound to its complementary target sequence. In this study, a hybridization assay was developed to detect biotinylated CPT products that result from the amplification of a Mycobacterium tuberculosis complex sequence. The chimeric probe was specifically designed to avoid the formation of secondary structures. The chosen capture probe was perfectly complementary to and was the same size as OL2, one of the two CPT products. The assay was based on the observation that a long sequence, such as the initial probe, was destabilized when bound to a small capture probe as a result of steric hindrance. The capture probe preferentially bound OL2 rather than the long initial probe. We added a prehybridization step with a helper DNA to enhance this discrimination between the two sequences. Colorimetric detection was performed using a peroxidase-streptavidin conjugate. After optimization, the non-isotopic hybridization assay allowed the detection of around 10 amol of target DNA. Besides being faster and easier to perform, this detection method was compared to electrophoresis separation and gave similar results.     

Design of a sandwich-mode amperometric biosensor for detection of PML/RARα fusion gene using locked nucleic acids on gold electrode

In this study, a novel DNA electrochemical probe (locked nucleic acid, LNA) was designed and involved in constructing an electrochemical DNA biosensor for detection of promyelocytic leukemia/retinoic acid receptor alpha (PML/RARα) fusion gene in acute promyelocytic leukemia for the first time. This biosensor was based on a 'sandwich' sensing mode, which involved a pair of LNA probes (capture probe immobilized at electrode surface and biotinyl reporter probe as an affinity tag for streptavidin-horseradish peroxidase (streptavidin-HRP). Since biotin can be connected with streptavidin-HRP, this biosensor offered an enzymatically amplified electrochemical current signal for the detection of target DNA. In the simple hybridization system, DNA fragment with its complementary DNA fragment was evidenced by amperometric detection, with a detection limit of 74 fM and a linear response range of 0.1-10 pM for synthetic PML/RARα fusion gene in acute promyelocytic leukemia (APL). Otherwise, the biosensor showed an excellent specificity to distinguish the complementary sequence and different mismatch sequences. The new pattern also exhibited high sensitivity and selectivity in mixed hybridization system.     

DNA microdevice for electrochemical detection of Escherichia coli 0157:H7 molecular markers

An electrochemical DNA sensor based on the hybridization recognition of a single-stranded DNA (ssDNA) probe immobilized onto a gold electrode to its complementary ssDNA is presented. The DNA probe is bound on gold surface electrode by using self-assembled monolayer (SAM) technology. An optimized mixed SAM with a blocking molecule preventing the nonspecific adsorption on the electrode surface has been prepared. In this paper, a DNA biosensor is designed by means of the immobilization of a single stranded DNA probe on an electrochemical transducer surface to recognize specifically Escherichia coli (E. coli) 0157:H7 complementary target DNA sequence via cyclic voltammetry experiments. The 21 mer DNA probe including a C6 alkanethiol group at the 5' phosphate end has been synthesized to form the SAM onto the gold surface through the gold sulfur bond. The goal of this paper has been to design, characterise and optimise an electrochemical DNA sensor. In order to investigate the oligonucleotide probe immobilization and the hybridization detection, experiments with different concentration of DNA and mismatch sequences have been performed. This microdevice has demonstrated the suitability of oligonucleotide Self-assembled monolayers (SAMs) on gold as immobilization method. The DNA probes deposited on gold surface have been functional and able to detect changes in bases sequence in a 21-mer oligonucleotide.     

Solution-phase detection of polynucleotides using interacting fluorescent labels and competitive hybridization

DNA was assayed in a homogeneous format using DNA probes containing hybridization-sensitive labels. The DNA probes were prepared from complementary DNA strands in which one strand was covalently labeled on the 5'-terminus with fluorescein and the complementary strand was covalently labeled on the 3'-terminus with a quencher of fluorescein emission, either pyrenebutyrate or sulforhodamine 101. Probes prepared in this manner were able to detect unlabeled target DNA by competitive hybridization producing fluorescence signals which increased with increasing target DNA concentration. A single pair of complementary probes detected target DNA at a concentration of approximately 0.1 nM in 10 min or about 10 pM in 20-30 min. Detection of a 4 pM concentration of target DNA was demonstrated in 6 h using multiple probe pairs. The major limiting factors were background fluorescence and hybridization rates. Continuous monitoring of fluorescence during competitive hybridization allowed correction for variable sample backgrounds at probe concentrations down to 20 pM; however, the time required for complete hybridization increased to greater than 1 h at probe concentrations below 0.1 nM. A promising application for this technology is the rapid detection of amplified polynucleotides. Detection of 96,000 target DNA molecules in a 50-microliters sample was demonstrated following in vitro amplification using the polymerase chain reaction technique.     

Application of synthetic oligonucleotides to the diagnosis of human genetic diseases

Under appropriate conditions synthetic oligonucleotide hybridization probes display essentially absolute hybridization specificity. That is, every nucleotide must form a Watson-Crick base pair in order that the probe forms a stable duplex. All of the non-Watson-Crick base pairs, including G-T, have a destabilizing effect. Thus, it is possible to choose stringent conditions of hybridization such that, while a perfectly matched duplex between an oligonucleotide and complementary DNA will form, duplexes mismatched at one or more position will not. Mutations in a single base in the DNA sequence of a gene can and do result in genetic diseases. The hybridization of oligonucleotides to the region of DNA containing these base changes would be affected by the mutations and thus, oligonucleotide hybridization provides a means of detecting single base changes. In an attempt to develop a non-radioactive method for the detection of human genetic diseases, we have prepared biotinylated-oligonucleotides by an enzymatic method. An oligonucleotide probe (23-mer) containing a single biotinylated deoxyuridine residue at the 3'-terminus was prepared by a primer extention reaction using E. coli DNA polymerase I (Klenow fragment). The probe could be specifically and tightly bound with Avidin D in 1 M NaCl. It could be hybridized to a plasmid DNA containing a perfectly matched complementary sequence, but not to a DNA containing 5 non-consecutive non-complementary bases. The hybridized biotinylated probe could be visualized by Avidin D and biotinylated alkaline phosphatase, even when 1.8 ng of the plasmid DNA (0.5 fmol) was used. A general approach to the enzymatic synthesis of oligonucleotides containing a single biotinylated deoxyuridine at the 3' end is described.     

Oligonucleotide quartz crystal microbalance sensor for the microalgae Alexandrium minutum (Dinophyceae)

We report the immobilization on a gold surface of a 20-base DNA probe labeled with disulfide group and on the selective hybridization with the complementary 20-base DNA strand. The oligonucleotide probe is the complementary strand of a partial sequence of the gene encoding for a large ribosomal RNA sub-unit which is a coding sequence of Alexandrium minutum DNA, a microalgae that produces neurotoxins responsible for paralytic shellfish poisoning on European and Asian coasts. The kinetics of DNA probe immobilization and hybridization were monitored in situ by using a 27 MHz quartz crystal microbalance under controlled hydrodynamic conditions. The frequency of the setup is stable to within a few hertz, corresponding to the nanogram scale, for 3h and makes it possible to follow frequency change from immobilization of the probe to hybridization of the complementary DNA target. This setup constitutes a biosensor, which is sensitive and selective, and the hybridization ratio between hybridized complementary DNA and immobilized DNA probes is 47%.     

生物素标记寡核苷酸探针探测扩增的病理性突变珠蛋白基因

用末端转移酶催化生物素核苷酸底物(Biotin-ll-dUTP)共价连接在合成的寡核苷酸3’羟基末端,从而合成了两种寡核苷酸探针(β~T_(41-42)及β~A_(41-42))。用它们分别与克隆化扩增的正常和突变的β—珠蛋白基因片段杂变。结果表明该探针都具有与~(32)P探针相似的特异性,其杂交的灵敏度为2—3pg(特异序列)。进而将探测HbS基因的正常和异常两种寡核苷酸19聚体(β~A_6和β~S_6)用~(32)P和生物素分别标记;将HbS杂合子病人的白细胞DNA经聚合酶链反应(PCR)法扩增,并以含正常β—珠蛋白基因的DNA片段作对照,与两种探针分别进行斑点杂交。所得结果完全一致;Hbs杂合子DNA对正常和异常探针都显出杂交信号,而正常DNA只与β~A探针显杂交信号。     

Solution hybridization of crosslinkable DNA oligonucleotides to bacteriophage M13 DNA. Effect of secondary structure on hybridization kinetics and equilibria

Several DNA oligonucleotides have been photochemically modified with the furocoumarin 4'-hydroxymethyl-4,5',8-trimethylpsoralen (HMT) such that each contained a single HMT furan side monoadduct to thymidine at a unique 5' TpA 3' sequence. When these oligonucleotides were hybridized to their respective complements, the HMT adduct could be driven to form an interstrand crosslink by irradiation of the hybrid with 360 nm light. The ability to crosslink probe-target complexes has allowed us to determine the kinetics and the extent of hybridization in solution between these oligonucleotides and their complementary sequences in single-stranded bacteriophage M13 DNA. Our data indicate that these parameters are strongly influenced by the existence of local as well as global secondary structure in the viral DNA. During hybridization, rearrangement of this secondary structure so as to expose the target sequence can be rate-limiting. Upon attainment of equilibrium, only a portion of the target sequence may be hybridized to the probe with the remainder involved in intrastrand base-pairing. Using crosslinkable oligonucleotide probes hybridized and irradiated near the melting temperature of the respective probe-target complex one can partially overcome these secondary structure effects.     

Express hybridization of molecular colonies with fluorescent probes

DNA colonies formed during PCR in a polyacrylamide gel and RNA colonies grown in an agarose gel containing Qbeta replicase can be identified using the procedure of transfer of molecular colonies onto a nylon membrane followed by membrane hybridization with fluorescent oligonucleotide probes. The suggested improvements significantly simplify and accelerate the procedure. By the example of a chimeric AML1-ETO sequence, a marker of frequently occurring leukemia, the express hybridization method was shown to allow the rapid identification of single molecules and the determination of titers of DNA and RNA targets. Hybridization with a mixture of two oligonucleotide probes labeled with different fluorophores complementary to components of the chimeric molecule ensures the identification of molecular colonies containing both parts of the chimeric sequence and improves the specificity of diagnostics.     

Allelic discrimination by nick-translation PCR with fluorogenic probes.

Nick-translation PCR was performed with fluorogenic probes. Two probes were used: one complementary to a sequence containing the F508 codon of the normal human cystic fibrosis (CF) gene (wt DNA) and one complementary to a sequence containing the delta F508 three base pair deletion (mut DNA). Each probe contained a unique and spectrally resolvable fluorescent indicator dye at the 5' end and a common quencher dye attached to the seventh nucleotide from the 5' end. The F508/delta F508 site was located between the indicator and quencher. The probes were added at the start of a PCR containing mut DNA, wt DNA or heterozygous DNA and were degraded during thermal cycling. Although both probes were degraded, each probe generated fluorescence from its indicator dye only when the sequence between the indicator and quencher dyes was perfectly complementary to target. The identify of the target DNA could be determined from the post-PCR fluorescence emission spectrum.