Synthesis of Tubercidin, 6-Chlorotubercidin and Related Nucleosides

Abstract

Tubercidin (7-deazaadenosine, 1a) and several 6-chlorotuber-cidin derivatives were synthesized including 4-amino-6-chloro-7-β-D-ribofuranosylpyrrolo[2,3-d]pyrimidine-3′,5′-cycyclic phosphate 9. Isolation of a side product found in the glycosylation step of the reaction sequence proved to be the N-1 ribosyl-attached isomer as shown by X-ray diffraction analysis. All derivatives were tested for in vitro antiviral and antitumor activity.     

Synthesis and Analysis of Nucleosides Bearing Pyrrolepolyamide Binding to DNA

Abstract

An efficient synthesis of adenosine bearing pyrrolepolyamide 1 was achieved by coupling of 3 with 2. The CD spectra obtained at several [ligand ]/[duplex] ratios allowed verification of the formation complex of the DNA duplex [d(CGCAAATTGGC)/d(GCCAATTTGCG)] with 1.     

Nucleotides LXIV[1]: Synthesis,Hybridization and Enzymatic Degradation Studies of 2′-O-Methyl-Oligoribonucleotides and 2′-O-Methyl/Deoxy Gapmers

Abstract

2′-O-Methyloligoribonucleotides, deoxyoligonucleotides and 2′-O-methyl/ deoxy gapmers were synthesized using solid phase phosphoramidite chemistry employing the 2-(4-nitrophenyl)ethyl (npe) protection strategy. Melting temperatures of the synthesized oligonucleotides as well as their stability against degradation by several different nucleases were determined. 2′-O-Methyloligoribonucleotides showed the highest melting temperatures (T_m's) whereas 2′-O-methyl/deoxy gapmers revealed either slightly higher or surprizingly no thermal stabilities compared with their deoxy analogs when using selfcomplementary sequences. Gapmers with four 2′-O-methyl nucleotides on both ends showed about the same stability as all 2′-O-methyloligoribonucleotides against micrococal nuclease, nuclease S₁, and snake venom phosphodiesterase.     

Studies on the Chemical Synthesis of Potential Antimetabolites. 371. Synthesis of 3-Deazaadenine Nucleosides Modified at the Sugar Moiety

Abstract

Several types of 3-deazaadenine pentofuranosides, represented by 9-(3-deoxy-β-D-glycero-pent-3-enofuranosyl)-3-deazaadenine (1), 9-(5-deoxy-β-Q-erythro-pent-4-enofuranosyl)-3-deazaadenine (2) and 9-β-D-xylo-furanosyl-3-deazaadenine (3), were prepared starting from 6-chloro-9-β-D-ribofuranosyl-3-deazaadenine (4).     

Amide isosteres of lexitropsins: synthesis, DNA binding characteristics and sequence selectivity of thioformyldistamycin.

The synthesis and properties of an amide isostere of the antibiotic distamycin, thioformyldistamycin 3 is described. Compound 3 exists predominantly in the E conformation of the thioamide group in freshly prepared DMSO solution but is converted into the Z form, predicted by molecular mechanics to be more stable, on standing for 24 h. The coalescence temperature in DMSO is 110 degrees C by 1H-NMR. The thioformyl moiety of 3 is resistant to both peptidase action and acid treatment. Complementary strand MPE footprinting on a EcoRI/Hind III restriction fragment of pBR322 DNA demonstrated that either E or Z forms of 3 give a single set of footprints very similar to that of the parent antibiotic with strongest protection at TAAG and TATTAT with moderately strong protection at ATTT and AAAA. The strength of binding of 3 and distamycin from delta Tm measurements to either poly.d(AT) or calf thymus DNA is comparable. Molecular modeling predicted a preferred conformation for 3 wherein the C = S bond has a torsional angle of 110 degrees with the pyrrole ring. The energy difference between this conformation and the E form is less than 1 kcal/mole. In contrast the E-form has an energy 17.3 kcal/mole greater than the Z and a value of 26.3 kcal/mole was calculated for the energy barrier between the two isomers.     

Studies on Disaccharide Nucleoside Synthesis. Mechanism of the Formation of Trisaccharide Purine Nucleosides

Abstract

The unexpected formation of trisaccharide nucleosides during synthesis of purine 5′-O-β-D-ribofuranosylnucleosides in the presence of Lewis acids was observed.     

Raman and Infrared Studies of Nucleosides at High Pressures: I. Adenosine

Abstract

Room temperature Raman and infrared (IR) spectra of crystalline adenosine at pressures between 1 atm and 10 GPa are reported. Vibrational modes were identified through assignments in the literature. Many modes were found to increase in frequency with pressure; however, some irregularities were observed. Discontinuities were observed in numerous Raman and IR modes near 2.5 GPa, indicating a phase transition. The modes associated with the glycosidic bond shift significantly down in frequency near this pressure, suggesting a weakening of the associated bond. The IR modes associated with hydrogen-stretching motions were found to decrease in frequency with pressure.     

Synthesis and Antioxidant Capacity of Some Derivatives of Sesamol at the C-6 Position

Several synthetic approaches (aminomethylation, alkylation, condensation, etc.) have been used to synthesize derivatives based on the sesamol ( 1 ), natural phenol. The set of methods, including the study of antioxidant activity (AOA) by the ability to inhibit the initiated oxidation of animal lipids, radical scavenging activity, Fe²⁺-chelation ability, as well as a comparative assessment of membrane-protective activity under the conditions of H₂O₂-induced hemolysis of mice red blood cells (RBCs), was used to analyze the antioxidant potential of the synthesized compounds. The synthesized derivatives have demonstrated different activity in the listed test systems, and we have identified compounds which appear to be most promising for a detailed study of their pharmacological properties.     

Amide Coupling Reaction for the Synthesis of Bispyridine-based Ligands and Their Complexation to Platinum as Dinuclear Anticancer Agents

Amide coupling reactions can be used to synthesize bispyridine-based ligands for use as bridging linkers in multinuclear platinum anticancer drugs. Isonicotinic acid, or its derivatives, are coupled to variable length diaminoalkane chains under an inert atmosphere in anhydrous DMF or DMSO with the use of a weak base, triethylamine, and a coupling agent, 1-propylphosphonic anhydride. The products precipitate from solution upon formation or can be precipitated by the addition of water. If desired, the ligands can be further purified by recrystallization from hot water. Dinuclear platinum complex synthesis using the bispyridine ligands is done in hot water using transplatin. The most informative of the chemical characterization techniques to determine the structure and gross purity of both the bispyridine ligands and the final platinum complexes is ¹H NMR with particular analysis of the aromatic region of the spectra (7-9 ppm). The platinum complexes have potential application as anticancer agents and the synthesis method can be modified to produce trinuclear and other multinuclear complexes with different hydrogen bonding functionality in the bridging ligand.     

Oligonucleotide Conjugates Derived from an Electrophilic Site: Conjugation to Baseless Carbohydrate Residue. Synthesis,Hybridization and Modeling Studies

Abstract

Conjugation of electrophiles to oligonucleotides via tethers camying nucleophilic sites well-known. However, for the rever.se reaction, the availahlc methods to generate electrophilic sites in oligonucleotides are not many: (e.g., periodate oxidation of terminal rihose sugar followed by reductive amination).     

Selective Synthesis and Application to the Synthesis of (E)-Fluorovinyl Nucleosides

A selective method for synthesizing (E)-fluorovinyl was developed. Novel acyclic (E)-fluorovinyl versions of neplanocin A were designed and selectively synthesized as potential antiviral agents. The condensation of the bromide 7 with the nucleosidic bases (5-FU, C, A, G) and the deprotection afforded the desired acyclic fluorovinyl nucleosides. The synthesized compounds 11, 12, 13, and 16 were evaluated for their antiviral activity. The guanine derivative 16 showed toxicity-dependent anti-HIV-1 activity in MT-4 cells.     

Synthesis and Biological Evaluation of 1,3-Oxathiolane 5-Azapyrimidine, 6-Azapyrimidine,and Fluorosubstituted 3-Deazapyrimidine Nucleosides

Abstract

(2R,5S)-5-Amino-2-[2-(hydroxymethyl)-1,3-oxathiolan-5-y1]-1,2,4-triazine-3(2H)-one (8) and (2R,5R)-5-amino-2-[2-(hydroxymethyl)-1,3-oxathiolan-5-y1]-1,2,4-triazine-3(2H)-one (9) have been synthesized via a multi-step procedure from 6-azauridine. (2R,5S)-4-Amino-1-[2-(hydroxymethyl)-1,3-oxathiolan-5-y1]-1,3,5-triazine-2(1H)-one (11) and (2R,5R)-4-amino-1-[2-(hydroxymethyl)-1,3-oxathiolan-5-y1]-1,3,5-triazine-2(1H)-one (12), and the fluorosubstituted 3-deazanucleosides (19–24) have been synthesized by the transglycosylation of (2R,5S)-1-{2-[[(tert-butyldiphenylsilyl) oxy]methyl]-1,3-oxathiolan-5-y1} cytosine (2) with silylated 5-azacytosine and the corresponding silylated fluorosubstituted 3-deazacytosines, respectively, in the presence of trimethylsilyl trifluoromethanesulfonate as the catalyst in anhydrous dichloroethane, followed by deprotection of the blocking groups. These compounds were tested in vitro for cytotoxicity against L1210, B₁₆F₁₀, and CCRF-CEM tumor cell lines and for antiviral activity against HIV-1 and HBV.     

An Extended Phosphate Linkage: Synthesis,Hybridization and Modeling Studies of Modified Oligonucleotides

Abstract

Novel stretched oligonucleotides (A-D) containing a 3′-α-C-methylene phosphodiester bridge (5-atoms long) have been synthesized on an automated synthesizer utilizing phosphoramidite chemistry. The key building-block 1-[3′-O-β-cyanoethyldiisopropylaminophosphiryl-2,3-dideoxy-5-O-dimethoxytriphenylmethyl-3-C-(hydroxymethyl)-β-D-erythro-pentofuranosyl]thymine (21) was prepared in a stereoselective manner from thymidine. Hybridization studies indicated a drop (1.8–3.0°C/mod.) in affinity for the complementary RNA and DNA targets. Molecular modeling results indicated that the 5-atom modified backbone had a different geometry around the phosphodiester linkage compared to the natural phosphodiester linkage. The stretched backbone may not be useful for antisense or triplex constructs, however it may find applications in biochemical/enzyme studies.

     

Termination of vitro DNA synthesis at AAF adducts in the DNA.

DNA synthesis catalyzed by E. coli polymerases I or III is inhibited on templates containing N-acetoxy-acetylaminofluorene-reacted adducts. Termination of synthesis occurs just before the site of the adduct. Synthesis on 0X174 templates primed with restriction fragments and treated with AAAF can be visualized on DNA sequencing gels. Comparison of the amounts of the different newly synthesized fragments with those calculated from the probability of termination as determined from the average number of adducts per molecule shows that synthesis terminates, rather than stutters, at each adduct. This method may be useful for detecting the bypass of lesions.     

Studies on DNA content, RNA synthesis, and DNA template activity in aging cells of Paramecium aurelia.

Investigations by Feulgen microspectrophotometry in Paramecium aurelia indicated that as fission age increased the amount of macronuclear DNA decreased. It was also found that the amount of RNA synthesis as determined by the in vivo incorporation of [³H]uridine decreased as the fission age increased. An alternative in situ assay of the DNA template activity determined by the RNA polymerase-catalyzed incorporation of [³H]UTP is described. The DNA template activity of older cells was shown to be significantly lower on a per cell basis than that of younger cells. The majority of this reduction was shown to be due to the gradual loss of DNA template with an increase in fission age. The specific activity of the DNA template, however, does show a small but significant decrease as the fission age of the cell increases.     

Studies on the miscoding properties of 1,N6-ethenoadenine and 3,N4-ethenocytosine, DNA reaction products of vinyl chloride metabolites, during in vitro DNA synthesis.

1,N6-Ethenoadenine (epsilon A) and 3,N4-ethenocytosine (epsilon C) are formed when electrophilic vinyl chloride (VC) metabolites, chloroethylene oxide (CEO) or chloroacetaldehyde (CAA) react with adenine and cytosine residues in DNA. They were assayed for their miscoding properties in an in vitro system using Escherichia coli DNA polymerase I and synthetic templates prepared by reaction of poly(dA) and poly(dC) with increasing concentrations of CEO or CAA. Following the introduction of etheno groups, an increasing inhibition of DNA synthesis was observed. dGMP was misincorporated on CAA- or CEO-treated poly(dA) templates and dTMP was misincorporated on CAA- or CEO-treated poly(dC) templates, suggesting that epsilon A and epsilon C may miscode. The error rates augmented with the extent of reaction of CEO or CAA with the templates. Base-pairing models are proposed for the epsilon A.G. and epsilon C.T pairs. The potentially miscoding properties of epsilon A and epsilon C may explain why metabolically-activated VC and its reactive metabolites specifically induce base-pair substitution mutations in Salmonella typhimurium. Promutagenic lesions may represent one of the initial steps in VC- or CEO-induced carcinogenesis.     

The application of microwave heating to the synthesis of 6-amino-6-deoxycellulose

Microwave heating was applied to the reactions involved in the synthesis of 6-amino-6-deoxycellulose, 4. These included, cellulose solubilization, bromination at C-6, displacement of bromine with azide ion, and reduction of the azido group to an amino group. Compared to conventional heating, this approach had the advantages of shortening reaction times and retaining the degree of polymerization of 4.     

Synthesis and application of a novel, crystalline phosphoramidite monomer with thiol terminus, suitable for the synthesis of DNA conjugates

A new, crystalline 5'-thiol modifier phosphoramidite monomer (3), suitable for DNA synthesis, has been prepared. This monomer has been built into an oligonucleotide using the standard protocol. After cleavage, purification and removal of the trityl group with Ag(+), a free 5'-thiol terminal oligonucleotide (15) has been obtained which was subsequently coupled to a cysteine derivative via a disulfide bridge to afford conjugate 16.     

Nucleosides,LVIII1 Synthesis of Base - Modified Oligonucleotides Containing 6- and 7-Aryl Lumazines

Abstract

6-Phenyl-, 7-phenyl-, 6-(4-biphenyl)- 7-(4-biphenyl)lumazine N-1-2-deoxy-β-D-ribofuranosides were synthesized, then converted into the corresponding 5′-O-dimethoxytrityl-3′-O-(β-cyanoethyl, N,N-diisopropyl)phosphoramidites and incorporated into different positions of self-complementary oligonucleotides. The influence of modifications on the melting temparature of the resulting duplexes was studied.

     

DNA requirements at the bacteriophage G4 origin of complementary-strand DNA synthesis.

An in vivo assay was used to define the DNA requirements at the bacteriophage G4 origin of complementary-strand DNA synthesis (G4 origin). This assay made use of an origin-cloning vector, mRZ1000, a defective M13 recombinant phage deleted for its natural origin of complementary-strand DNA synthesis. The minimal DNA sequence of the G4 genome sufficient for the restoration of normal M13 growth parameters was determined to be 139 bases long, located between positions 3868 and 4007. This G4-M13 construct was also found to give rise to proper initiation of complementary-strand synthesis in vitro. The cloned DNA sequence contains all the regions of potential secondary structure which have been implicated in primase-dependent replication initiation as well as additional sequence information. To address the role of one region which potentially forms a DNA secondary structure, the DNA sequence internal to the G4 origin was altered by site-directed mutagenesis. A 3-base insertion at the AvaII site as well as a 17-base deletion between the AvaI and AvaII sites both resulted in loss of origin function. The 17-base deletion was also generated within the G4 genome and found to dramatically reduce the infectious growth rate of the resulting phage. These results are discussed with respect to the role of the G4 origin as the recognition site for primase-dependent replication initiation and its possible role in stage II replication.