A genetic analysis of glucocorticoid receptor signaling. Identification and characterization of ligand-effect modulators in Saccharomyces cerevisiae

To find novel components in the glucocorticoid signal transduction pathway, we performed a yeast genetic screen to identify ligand-effect modulators (LEMs), proteins that modulate the cellular response to hormone. We isolated several mutants that conferred increased glucocorticoid receptor (GR) activity in response to dexamethasone and analyzed two of them in detail. These studies identify two genes, LEM3 and LEM4, which correspond to YNL323w and ERG6, respectively. LEM3 is a putative transmembrane protein of unknown function, and ERG6 is a methyltransferase in the ergosterol biosynthetic pathway. Analysis of null mutants indicates that LEM3 and ERG6 act at different steps in the GR signal transduction pathway.     

Separation and concentration of amino acids using liquid emulsion membranes

The separation and concentration of amino acids using liquid emulsion membranes (LEMs) are discussed. Using L- phenylalanines as a model solute, it is experimentally shown using a facilitated transport system that separation and concentration can be simultaneously achieved. The rate of separation, final product concentration, and membrane swell are shown to increase with increasing chloride driving forces in the membrane, These effects are shown to be insensitive to the particular salt used as the driving force. Changes in the carrier concentration are shown to result in higher initial fluxes and higher swell rates. Hydrodynamically induced membrane breakage is minimal for the system under consideration. Experiments indicate that osmotically induced water transport ("swelling") in the LEM system is mediated by both the carrier and the emulsion-stabilizing surfactant. The data suggest that this swell is a diffusion-limited process. The specificity of the carrier is examined and is found to be directly related to the hydrophobicity of the solute. Strategies for optimizing LEM formulations are discussed. Emphasis is placed on the hydration characteristics of the surfactant and the specificity of the carrier.     

Separation and sensing based on molecular recognition using molecularly imprinted polymers

Molecular recognition-based separation and sensing systems have received much attention in various fields because of their high selectivity for target molecules. Molecular imprinting has been recognized as a promising technique for the development of such systems, where the molecule to be recognized is added to a reaction mixture of a cross-linker(s), a solvent(s), and a functional monomer(s) that possesses a functional groups(s) capable of interacting with the target molecule. Binding sites in the resultant polymers involve functional groups originating from the added functional monomer(s), which can be constructed according to the shape and chemical properties of the target molecules. After removal of the target molecules, these molecularly imprinted complementary binding sites exhibit high selectivity and affinity for the template molecule. In this article, recent developments in molecularly imprinted polymers are described with their applications as separation media in liquid chromatography, capillary electrophoresis, solid-phase extraction, and membranes. Examples of binding assays and sensing systems using molecularly imprinted polymers are also presented.     

Effect of solution pH and ionic strength on the separation of albumin from immunoglobulins (IgG) by selective filtration

Although protein fractionation by selective membrane filtration has numerous potential applications in both the downstream processing of fermentation broths and the purification of plasma proteins, the selectivity for proteins with only moderately different molecular weights has generally been quite poor. We have obtained experimental data for the transport of bovine serum albumin (BSA) and immunoglobulins (IgG) through 100,000 and 300,000 molecular weight cutoff polyethersulfone membranes in a stirred ultrafiltration device at different solution pH and ionic strength. The selectivity was a complex function of the flux due to the simultaneous convective and diffusive solute transport through the membrane and the bulk mass transfer limitations in the stirred cell. Under phsioligical conditions (pH 7.0 and 0.15 M NaCI) the maximum selectivity for the BSA-IgG separation was only about 2.0 due primarily to the effects of protein adsorption. In contrast, BSA-IgG selectivities as high as 50 were obtained with the same membranes when the protein solution was at pH 4.8 and 0.0015 M NaCl. This enhanced selectivity was a direct result of the electrosatatic contributions to both bulk and membrane transport. The membrane selectivity could actually be reversed, with higher passage of the larger IgG molecules, by using a 300,000 molecular weight cutoff membrane at pH 7.4 and an ionic strength of 0.0015 M NaCl. These results clearly demonstrate that the effectiveness of selective protein filtration can be dramatically altered by appropriately controlling electrostatic interactions through changes in pH and/or ionic strength. (c) 1994 John Wiley & Sons, Inc.     

A Review of Multi-Responsive Membranous Systems for Rate-Modulated Drug Delivery

Membrane technology is broadly applied in the medical field. The ability of membranous systems to effectively control the movement of chemical entities is pivotal to their significant potential for use in both drug delivery and surgical/medical applications. An alteration in the physical properties of a polymer in response to a change in environmental conditions is a behavior that can be utilized to prepare ‘smart’ drug delivery systems. Stimuli-responsive or ‘smart’ polymers are polymers that upon exposure to small changes in the environment undergo rapid changes in their microstructure. A stimulus, such as a change in pH or temperature, thus serves as a trigger for the release of drug from membranous drug delivery systems that are formulated from stimuli-responsive polymers. This article has sought to review the use of stimuli-responsive polymers that have found application in membranous drug delivery systems. Polymers responsive to pH and temperature have been extensively addressed in this review since they are considered the most important stimuli that may be exploited for use in drug delivery, and biomedical applications such as in tissue engineering. In addition, dual-responsive and glucose-responsive membranes have been also addressed as membranes responsive to diverse stimuli.     

Preface

Data on the toxicity and selectivity of synthetic pyrethroids (SPs) to arthropod natural enemies and their host or prey are reviewed with emphasis on cotton, apple, alfalfa, cereal and vegetable inhabiting species. Generally, SPs are variably toxic and selective (in relation to their hosts or prey) to species within most families of natural enemies. Exceptions are low to moderate toxicity and favorable selectivity to most hemipteran predators, and high toxicity and unfavorable selectivity to virtually all phytoseiid mites in comparison to their prey. In North America, SPs are more favorably selective to cotton natural enemies over their prey or host than to apple inhabiting species. These differences may be due to intrinsic levels of susceptibility (preselection levels) between the types of natural enemies exploited on both crops in IPM programs (i.e. hemipteran species on cotton versus phytoseiid mites on apple) and/or to tolerances or resistances differences due to previous patterns of chemical use on these crops. Possible means of increasing selective use of SPs in future IPM systems based on ecological and physiological selectivity including the development of SP-resistant predators are discussed.     

Detection of organics using porphyrin embedded nanoporous organosilicas

Molecularly imprinted polymers and silica have been studied as receptor binding site mimics for use in a wide range of separation, catalysis, and detection applications employing transduction mechanisms including conductometric, amperometric, and capacitance. Porphyrins are also well known as sensor components due to the extreme sensitivity of their spectrophotometric characteristics to changes in their immediate environment. We have developed periodic mesoporous organosilicas (PMO) which incorporate a porphyrin into the material for use as an optical indicator of target binding. This material combines the stability, selectivity, and high density of binding sites characteristic of the molecularly imprinted PMO with the sensitivity and selectivity of the porphyrin. We demonstrate binding of p-nitrophenol, p-cresol, 2,4,6-trinitrotoluene, and RDX by the porphyrin-embedded PMOs with selective adsorption of TNT over the other analytes. In addition, the binding of each of the organics by the PMO results in unique changes in the spectrophotometric characteristics of the incorporated porphyrin. These changes can be observed by visual inspection or through the use of fluorescence spectra collected in 96-well format.     

Enhanced Thermal Stability of W‐Ni‐Al2O3 Cermet‐Based Spectrally Selective Solar Absorbers with Tungsten Infrared Reflectors

Solar thermal technologies such as solar hot water and concentrated solar power trough systems rely on spectrally selective solar absorbers. These solar absorbers are designed to efficiently absorb the sunlight while suppressing re‐emission of infrared radiation at elevated temperatures. Efforts for the development of such solar absorbers must not only be devoted to their spectral selectivity but also to their thermal stability for high temperature applications. Here, selective solar absorbers based on two cermet layers are fabricated on mechanically polished stainless steel substrates using a magnetron sputtering technique. The targeted operating temperature is 500–600 °C. A detrimental change in the morphology, phase, and optical properties is observed if the cermet layers are deposited on a stainless steel substrate with a thin nickel adhesion layer, which is due to the diffusion of iron atoms from the stainless steel into the cermet layer forming a FeWO₄ phase. In order to improve thermal stability and reduce the infrared emittance, tungsten is found to be a good candidate for the infrared reflector layer due to its excellent thermal stability and low infrared emittance. A stable solar absorptance of ≈0.90 is demonstrated, with a total hemispherical emittance of 0.15 at 500 °C.     

CO2生物转化关键酶固定体系构筑研究进展与挑战

酶催化CO₂还原制备高值化学品对缓解全球环境和能源危机具有重要意义,利用甲酸脱氢酶(formate dehydrogenase,FDH)或多酶级联还原CO₂制备甲酸/甲醇具有选择性高、条件温和的优势,但关键酶活性低、稳定性差和重复利用率低的问题限制了其规模化应用,酶的固定化为这些问题提供了有效解决方案。本文总结了近年来利用膜、无机材料、金属有机框架和共价有机框架等载体对酶进行固定化的研究进展,阐释了不同固定材料和固定方式的特点和优势;进一步总结了固定化酶与电催化或光催化耦联反应体系对CO₂还原的协同效果及应用,同时指出酶固定化技术和耦联反应体系目前存在的问题并对其发展前景进行了展望。     

A reagentless amperometric electrode based on carbon paste, chemically modified with D-lactate dehydrogenase, NAD(+), and mediator containing polymer for D-lactic acid analysis. I. Construction, composition, and characterization

A reagentless carbon paste electrode was designed for D-lactic acid analysis in a flow injection system for the monitoring of the production of D-lactate in a batch fermentation. D-Lactate dehydrogenase, nicotinamide adenine dinucleotide (NAD(+)), a synthetic redox polymer containing covalently attached toluidine blue O as mediator, graphite powder, and paraffin oil were used for the construction of the modified carbon paste electrode. D-Lactate selectivity was indicated by insignificant responses from a variety of possible interfernces including L-lactate. The electrodes gave a linear response in the range between 0.05 and 5 mM D-lactate, with a detecting limit of 30 muM, allowing a sample throughput of 20 h(-1). Preliminary investigations were made by covering the electrode surface with electropolymerized membranes. Satisfactory stability was observed, indicated by a reproducibility of 3.3% relative standard deviation (RSD, n = 31), with a non-membrane-covered electrode for the analysis of D-lactate in fermentation broth. A long-term stability (230 broth samples) was proven, suggesting the electrodes to have a good potential for use in on-line monitoring of fermentation processes. (c) 1995 John Wiley & Sons, Inc.     

Development of applications of industrial enzymes from Malaysian indigenous microbial sources

Malaysian enzyme industry is considered almost non-existence, although the import volume is large. Realizing the importance of enzymes, encompassing a wide range of applications in bioindustry, the development of home grown technologies for enzyme production and applications becomes one of the national priorities in industrial biotechnology. Enzyme production from indigenous microbial isolates was performed either by submerged or solid state fermentation processes. Based on its wide and unique spectrum of properties, enzymes have been developed for wide applications in various industrial processes. The development of the enzyme catalysed applications is based on the modification of the reaction systems to enhance their catalytic activities. Some of the applications of the industrial enzymes include the fine chemicals production, oleochemicals modification, detergent formulation, enzymatic drinking of waste papers, animal feed formulation and effluent treatment processes. Enzymes have also shown to be successfully used as analytical tool in the determination of compounds in body fluids. Although, most of these enzyme catalysed reactions were performed in aqueous phase, the use of enzymes in organic solvents was found to be significant for the production of new chemicals.     

Poly-lactic acid synthesis for application in biomedical devices - a review

Bioabsorbable polymers are considered a suitable alternative to the improvement and development of numerous applications in medicine. Poly-lactic acid (PLA,) is one of the most promising biopolymers due to the fact that the monomers may produced from non toxic renewable feedstock as well as is naturally occurring organic acid. Lactic acid can be made by fermentation of sugars obtained from renewable resources as such sugarcane. Therefore, PLA is an eco-friendly product with better features for use in the human body (nontoxicity). Lactic acid polymers can be synthesized by different processes so as to obtain products with an ample variety of chemical and mechanical properties. Due to their excellent biocompatibility and mechanical properties, PLA and their copolymers are becoming widely used in tissue engineering for function restoration of impaired tissues. In order to maximize the benefits of its use, it is necessary to understand the relationship between PLA material properties, the manufacturing process and the final product with desired characteristics. In this paper, the lactic acid production by fermentation and the polymer synthesis such biomaterial are reviewed. The paper intends to contribute to the critical knowledge and development of suitable use of PLA for biomedical applications.     

Thermodynamically based solvent design for enzymatic saccharide acylation with hydroxycinnamic acids in non-conventional media

Enzyme-catalyzed synthesis has been widely studied with lipases (EC 3.1.1.3), but feruloyl esterases (FAEs; EC 3.1.1.73) may provide advantages such as higher substrate affinity and regioselectivity in the synthesis of hydroxycinnamate saccharide esters. These compounds are interesting because of their amphiphilicity and antioxidative potential. Synthetic reactions using mono- or disaccharides as one of the substrates may moreover direct new routes for biomass upgrading in the biorefinery. The paper reviews the available data for enzymatic hydroxycinnamate saccharide ester synthesis in organic solvent systems as well as other enzymatic hydroxycinnamate acylations in ionic liquid systems. The choice of solvent system is highly decisive for enzyme stability, selectivity, and reaction yields in these synthesis reactions. To increase the understanding of the reaction environment and to facilitate solvent screening as a crucial part of the reaction design, the review explores the use of activity coefficient models for describing these systems and - more importantly - the use of group contribution model UNIFAC and quantum chemistry based COSMO-RS for thermodynamic predictions and preliminary solvent screening. Surfactant-free microemulsions of a hydrocarbon, a polar alcohol, and water are interesting solvent systems because they accommodate different substrate and product solubilities and maintain enzyme stability. Ionic liquids may provide advantages as solvents in terms of increased substrate and product solubility, higher reactivity and selectivity, as well as tunable physicochemical properties, but their design should be carefully considered in relation to enzyme stability. The treatise shows that thermodynamic modeling tools for solvent design provide a new toolbox to design enzyme-catalyzed synthetic reactions from biomass sources.     

Stability of membrane systems modeled as multilayered viscoelastic films

We have modeled interacting plane-parallel membranes as viscoelastic multilayered films. A linear dynamic analysis was used. It gave the general conditions for stability of membrane systems having an arbitrary number of membranes and films. The particular cases of one, two and three interacting layers were considered in detail. The results suggest a strong dependence of the stability of membrane systems on the interfacial tensions and the thickness of individual membranes and films and rather weak dependence on their viscosities and elasticities. The theoretical predictions are in semi-quantitative agreement with data on electrically induced membrane fusion in dielectrophoresis.     

The predominant role of coordination number in potassium channel selectivity

Potassium channels are exquisitely selective, allowing K+ to pass across cell membranes while blocking other ion types. Here we demonstrate that the number of carbonyl oxygen atoms that surround permeating ions is the most important factor in determining ion selectivity rather than the size of the pore or the strength of the coordinating dipoles. Although the electrostatic properties of the coordinating ligands can lead to Na+ or K+ selectivity at some values of the dipole moment, no significant selectivity arises at the specific value of the dipole moment for carbonyl groups found in potassium channels when the ligands have complete freedom. Rather, we show that the main contribution to selectivity arises from slight constraints on the conformational freedom of the channel protein that limit the number of carbonyl oxygen atoms to a value better suited to K+ than Na+, despite the pore being flexible. This mechanism provides an example of a general framework for explaining ion discrimination in a range of natural and synthetic macromolecules in which selectivity is controlled by the number of coordinating ligands in addition to their dipole moment.     

Ionic selectivity of melittin-modified flat lipid bilayers]

It has been established in experiments with the bilayer lipid membranes (BLM) that at pH greater than 6.6 the melittin pores are cation-selective and at lower pH they are more selective by anions. The property of melittin pores is shown to be provided by the amino group of the N-terminal glycine residue. The selectivity of melittin-containing membranes may be controlled by the transmembrane potential, the cross-section of water pores being changed. The data obtained are explained within the alimethicine-like model.     

Monoolein-based nanocarriers for enhanced folate receptor-mediated RNA delivery to cancer cells

We report the development and characterization of a novel nanometric system for specific delivery of therapeutic siRNA for cancer treatment. This vector is based on a binary mixture of the cationic surfactant dioctadecyldimethylammonium chloride (DODAC) and the helper lipid monoolein (MO). These liposomes were previously validated by our research group as promising non-viral vectors for nucleic acid delivery. In this work, the DODAC:MO vesicles were for the first time functionalized with polyethylene glycol and PEG-folate conjugates to achieve both maximal stability in biological fluids and increase selectivity toward folate receptor α expressing cells. The produced DODAC:MO:PEG liposomes were highly effective in RNA complexation (close to 100%), and the resulting lipoplexes also demonstrated high stability in conditions simulating their administration by intravenous injection (physiological pH, high NaCl, heparin and fetal bovine serum concentrations). In addition, cell uptake of the PEG-folate-coated lipoplexes was significantly greater in folate receptor α positive breast cancer cells (39% for 25?µg/mL of lipid and 31% for 40?µg/mL) when compared with folate receptor α negative cells (31% for 25?µg/mL of lipid and 23% for 40?µg/mL) and to systems without PEG-folate (≈13% to 16% for all tested conditions), supporting their selectivity towards the receptor. Overall, the results support these systems as appealing vectors for selective delivery of siRNA to cancer cells by folate receptor α-mediated internalization, aiming at future therapeutic applications of interest.     

Engineered whole-cell biocatalyst-based detoxification and detection of neurotoxic organophosphate compounds

The development of efficient tools is required for the eco-friendly detoxification and effective detection of neurotoxic organophosphates (OPs). Although enzymes have received significant attention as biocatalysts because of their high specific activity, the uneconomic and labor-intensive processes of enzyme production and purification make their broad use in practical applications difficult. Because whole-cell systems offer several advantages compared with free enzymes, including high stability, a reduced purification requirement, and low preparation cost, they have been suggested as promising biocatalysts for the detoxification and detection of OPs. To develop efficient whole-cell biocatalysts with enhanced activity and a broad spectrum of substrate specificity, several factors have been considered, namely the selected strains, the chosen OP-hydrolyzing enzymes, where enzymes are localized in a cell, and which enhancer will assist the expression, function, and folding of the enzyme. In this article, we review the current investigative progress in the development of engineered whole-cell biocatalysts with excellent OP-hydrolyzing activity, a broad spectrum of substrate specificity, and outstanding stability for the detoxification and detection of OPs.     

Nonantibody-based recognition: alternative molecules for detection of pathogens

Immunoassays have been well established for many years as the cornerstone of detection technologies. These assays are sensitive, selective and, in general, highly resistant to interference from complex sample matrices when compared with nucleic acid-based tests. However, both antibody- and nucleic acid-based detection systems require a priori knowledge of the target and development of specific reagents; multiplexed assays can become increasingly problematic when attempting to detect a plethora of different targets, the identities of which are unknown. In an effort to circumvent many of the limitations inherent in these conventional assays, other recognition reagents are being explored as alternatives, or indeed as adjuncts, to antibodies for pathogen and toxin detection. This article will review a number of different recognition systems ranging in complexity from small molecules, such as nucleic-acid aptamers, carbohydrates and peptides, to systems as highly complicated as whole cells and organisms. All of these alternative systems have tremendous potential to achieve superior sensitivity, selectivity, and stability, but are also subject to their own limitations, which are also discussed. In short, while in its infancy, this field holds great promise for the development of rapid, fieldable assays that are highly complementary to existing antibody- and nucleic acid-based technologies.     

Towards lactic acid bacteria-based biorefineries

Lactic acid bacteria (LAB) have long been used in industrial applications mainly as starters for food fermentation or as biocontrol agents or as probiotics. However, LAB possess several characteristics that render them among the most promising candidates for use in future biorefineries in converting plant-derived biomass—either from dedicated crops or from municipal/industrial solid wastes—into biofuels and high value-added products. Lactic acid, their main fermentation product, is an attractive building block extensively used by the chemical industry, owing to the potential for production of polylactides as biodegradable and biocompatible plastic alternative to polymers derived from petrochemicals. LA is but one of many high-value compounds which can be produced by LAB fermentation, which also include biofuels such as ethanol and butanol, biodegradable plastic polymers, exopolysaccharides, antimicrobial agents, health-promoting substances and nutraceuticals. Furthermore, several LAB strains have ascertained probiotic properties, and their biomass can be considered a high-value product. The present contribution aims to provide an extensive overview of the main industrial applications of LAB and future perspectives concerning their utilization in biorefineries. Strategies will be described in detail for developing LAB strains with broader substrate metabolic capacity for fermentation of cheaper biomass.