MWCNT-ruthenium oxide composite paste electrode as non-enzymatic glucose sensor

A non-enzymatic glucose sensor of multi-walled carbon nanotube-ruthenium oxide/composite paste electrode (MWCNT-RuO(2)/CPE) was developed. The electrode was characterized by using XRD, SEM, TEM and EIS. Meanwhile, cyclic voltammetry and amperometry were used to check on the performances of the MWCNT-RuO(2)/CPE towards glucose. The proposed electrode has displayed a synergistic effect of RuO(2) and MWCNT on the electrocatalytic oxidation of glucose in 3M NaOH. This was possible via the formation of transitions of two redox pairs, viz. Ru(VI)/Ru(IV) and Ru(VII)/Ru(VI). A linear range of 0.5-50mM glucose and a limit of detection of 33μM glucose (S/N=3) were observed. There was no significant interference observable from the traditional interferences, viz. ascorbic acid and uric acid. Indeed, results so obtained have indicated that the developed MWCNT-RuO(2)/CPE would pave the way for a better future to glucose sensor development as its fabrication was without the use of any enzyme.     

Electrospun poly(vinylidene fluoride)/poly(aminophenylboronic acid) composite nanofibrous membrane as a novel glucose sensor

Electrospinning was used to prepare the nanofibrous membrane (NFM) of the composite comprising poly(vinylidene fluoride) and poly(aminophenylboronic acid) (PVdF/PAPBA-NFM). The PVdF/PAPBA-NFM displayed an excellent linear response to the detection of glucose for the concentration range of 1 to 15mM with a response time of less than 6s. Further experiments on amperometric sensing of glucose were performed in the presence of interferents such as uric acid, ascorbic acid, acetaminophen, fructose, mannose, etc. using PVdF/PAPBA-NFM. The interferents did not give significant overlapping current signal during the determination of glucose. Also, PVdF/PAPBA-NFM possesses better reproducibility toward glucose detection and storage stability.     

Glucose oxidase immobilized polyethylene-g-acrylic acid membrane for glucose oxidase sensor

A polyethylene-g-acrylic acid (PE-g-AA) graft copolymer was prepared via gamma-ray-irradiation-induced postirradiation procedures, and was used as support material for the immobilization of glucose oxidase. Soluble carbodiimides were used as the coupling agent. Reasonable yields were obtained with CMC but not with EDAC, EEDQ, or WRK. A number of factors were studied. (1) The use of water-soluble carbodiimides as condensing agent was attempted and the optimum condition for coupling glucose oxidase to PE-g-AA was established; (2) the effect of pH and temperature on the reactivity of native and immobilized glucose oxidase was studied. When exposed to temperatures in excess of 60 degrees C, the immobilized glucose oxidase was less sensitive to thermal inactivation than the native enzyme. The optimum pH value for the performance of the enzyme-immobilized membrane was 5. 6. For 200 tests, the response error of glucose sensor was less than 4% and its linear detected range was 0-1000 ppm. The obtained glucose oxidase-immobilized PE-g-AA membranes were kept in pH 5. 6 acetate buffer solution at 4 degrees C. The glucose oxidase activity of the membrane was determined at sevenday intervals. The membranes still have 92% glucose oxidase activity even after eight weeks of storage.     

The monotopic membrane protein human oxidosqualene cyclase is active as monomer

The monotopic integral membrane protein 2,3-oxidosqualene cyclase (OSC) catalyzes the formation of lanosterol the first sterol precursor of cholesterol in mammals. Therefore, it is an important target for the development of new hypocholesterolemic drugs. Here, we report the overexpression and purification of functional human OSC (hOSC) in Pichia pastoris. The obtained IC(50) for the reference inhibitor Ro 48-8071 is nearly identical for the recombinant hOSC compared to OSC from human liver microsomes. The correlation of analytical ultracentrifugation data and activity measurements showed the highest enzymatic activity for the monomeric hOSC indicating that this would be the natural form. Furthermore, these data helped us to identify the detergent for a successful crystallization of the protein. The availability of this active recombinant human membrane protein is a very important step on the way to a more detailed functional and structural characterization of OSCs.     

Membrane traffic: controlling membrane fusion by modifying NSF

Recent studies show that NSF, isolated over 15 years ago as a protein required for membrane fusion in vitro, can be reversibly inactivated by both S-nitrosylation and tyrosine phosphorylation. Different cell types use distinct post-translational modifications of NSF for localized regulation of membrane fusion.     

Predicting membrane protein types by fusing composite protein sequence features into pseudo amino acid composition

Membrane proteins are vital type of proteins that serve as channels, receptors, and energy transducers in a cell. Prediction of membrane protein types is an important research area in bioinformatics. Knowledge of membrane protein types provides some valuable information for predicting novel example of the membrane protein types. However, classification of membrane protein types can be both time consuming and susceptible to errors due to the inherent similarity of membrane protein types. In this paper, neural networks based membrane protein type prediction system is proposed. Composite protein sequence representation (CPSR) is used to extract the features of a protein sequence, which includes seven feature sets; amino acid composition, sequence length, 2 gram exchange group frequency, hydrophobic group, electronic group, sum of hydrophobicity, and R-group. Principal component analysis is then employed to reduce the dimensionality of the feature vector. The probabilistic neural network (PNN), generalized regression neural network, and support vector machine (SVM) are used as classifiers. A high success rate of 86.01% is obtained using SVM for the jackknife test. In case of independent dataset test, PNN yields the highest accuracy of 95.73%. These classifiers exhibit improved performance using other performance measures such as sensitivity, specificity, Mathew's correlation coefficient, and F-measure. The experimental results show that the prediction performance of the proposed scheme for classifying membrane protein types is the best reported, so far. This performance improvement may largely be credited to the learning capabilities of neural networks and the composite feature extraction strategy, which exploits seven different properties of protein sequences. The proposed Mem-Predictor can be accessed at http://111.68.99.218/Mem-Predictor.     

On the possibility of real-time monitoring of glucose in cell culture by microdialysis using a fluorescent glucose binding protein sensor

Although glucose sensors with millimolar sensitivity are still the norm, there is now a developing interest in glucose sensors with micromolar sensitivity for applications in minimally invasive sampling techniques such as fast microdialysis and extraction of interstitial fluid by iontophoresis and laser poration. In this regard, the glucose binding protein (GBP) with a binding constant for glucose in the micromolar range is of particular relevance. GBP is one of the soluble binding proteins found in the periplasmic space of Gram-negative bacteria. Because of its hinge-like tertiary structure, glucose binding induces a large conformational change, which can be used for glucose sensing by attaching a polarity sensitive fluorescent probe to a site on the protein that is allosterically responsive to glucose binding. Correspondingly, the resulting optical biosensor has micromolar sensitivity to glucose. Because binding is reversible, the biosensor is reusable and can be stored at 4 degrees C for 6 months without losing its sensitivity. In this paper, we show the feasibility of using the GBP biosensor to monitor glucose in microdialysis. The effect of perfusion rate, bulk glucose concentration and temperature on microdialysis efficiency was determined. Additionally, the glucose concentrations in mammalian cell culture were monitored to demonstrate the applicability of this sensor in complex and dynamic processes over a period of time. As the sensor is sensitive to micromolar glucose, high dialysis efficiency is not required when the bulk glucose concentration is within the millimolar physiological range. Thus, a perfusion rate of 10 microL/min or faster can be used, resulting in delay times of 1 min or less.     

Biocompatible fluorescent nanocrystals for immunolabeling of membrane proteins and cells

A methodology for simple convenient preparation of bright, negatively or positively charged, water-soluble CdSe/ZnS core/shell nanocrystals (NCs) and their stabilization in aqueous solution is described. Single NCs can be detected using a standard epifluorescent microscope, ensuring a detection limit of one molecule coupled with an NC. NCs solubilized in water by DL-Cys were stabilized, to avoid aggregation, by poly(allylamine) and conjugated with polyclonal anti-mouse antibodies (Abs). NC-Abs conjugates were tested in dot-blots and exhibited retention of binding capacity within several nanograms of antigen detected. We further demonstrated the advantages of NC-Abs conjugates in the immunofluorescent detection and three-dimensional (3D) confocal analysis of p-glycoprotein (p-gp), one of the main mediators of the MDR phenotype, overexpressed in the membrane of MCF7r breast adenocarcinoma cells. Immunolabeling of p-gp with NC-Abs conjugates was 4200-, 2600-, and 420-fold more resistant to photobleaching than its labeling with fluorescein isothiocyanate-Abs, R-phycoerythrin-Abs, and AlexaFluor488-Abs, respectively. The labeling of p-gp with NC-Abs conjugates was highly specific, and the data were used for confocal reconstruction of 3D images of the p-gp distribution in the MCF7r cell membrane. Finally, we demonstrated the applicability of NC-Abs conjugates obtained by the method described to specific detection of antigens in paraffin-embedded formaldehyde-fixed cancer tissue specimens, using immunostaining of cytokeratin in skin basal carcinoma as an example. We conclude that the NC-Abs conjugates may serve as easy-to-do, highly sensitive, photostable labels for immunofluorescent analysis, immunohistochemical detection, and 3D confocal studies of membrane proteins and cells.     

A multilayer membrane amperometric glucose sensor fabricated using planar techniques for large-scale production

This paper reports on a multilayer membrane amperometric glucose sensor fabricated using planar techniques. It is characterized by good reproducibility and suitable for large-scale production. The glucose sensor has 82 electrode sets formed on a single glass substrate, each with a platinum working electrode (WE), a platinum counter electrode (CE) and an Ag/AgCl reference electrode (RE). The electrode sets are coated with a membrane consisting of five layers: gamma-aminopropyltriethoxysilane (gamma-APTES), Nafion, glucose oxidase (GOX), gamma-APTES and perfluorocarbon polymer (PFCP), in that order. Tests have shown that the sensor has acceptably low dispersion (relative standard deviation, R.S.D.=42.9%, n=82), a wide measurement range (1.11-111 mM) and measurement stability over a 27-day period. Measurements of the glucose concentration in a control human urine sample demonstrated that the sensor has very low dispersion (R.S.D.=2.49%, n=10).     

Numerical simulation of a glucose sensitive composite membrane closed-loop insulin delivery system

Closed-loop insulin delivery system works on pH modulation by gluconic acid production from glucose, which in turn allows regulation of insulin release across membrane. Typically, the concentration variation of gluconic acid can be numerically modeled by a set of non-linear, non-steady state reaction diffusion equations. Here, we report a simpler numerical approach to time and position dependent diffusivity of species using finite difference and differential quadrature (DQ) method. The results are comparable to that obtained by analytical method. The membrane thickness directly determines the concentrations of the glucose and oxygen in the system, and inversely to the gluconic acid. The advantage with the DQ method is that its parameter values need not be altered throughout the analysis to obtain the concentration profiles of the glucose, oxygen and gluconic acid. Our work would be useful for modeling diabetes and other systems governed by such non-linear and non-steady state reaction diffusion equations.     

Metal ion-selective membrane prepared by surface molecular imprinting

Surface molecular imprinting was applied to the preparation of an ion-selective polymeric membrane for the first time. The use of acrylonitrile-butadiene rubber and a porous solid support in the polymer matrix resulted in improved flexibility and mechanical strength of the imprinted membrane. The asymmetric porous structure of the membrane was observed by scanning electron microscopy. The selectivity of the zinc(II)-imprinted membrane was evaluated by competitive adsorption and permeation studies. The imprinted membrane showed higher adsorption affinity and permeation selectivity towards the imprinted zinc ion than the non-imprinted counterpart. On the basis of the results obtained, the permeation mechanism of the metal ions was considered to be hopping of metal ions on the binding sites in the membranes.     

包封膜蛋白的仿生细胞膜

本文概述了脂质囊泡的组成成分和制作方法以及用于膜蛋白方面研究的相关技术,包括膜蛋白整合到囊泡的方法、复合体系的表征等。脂质囊泡可以为膜蛋白提供类似体内的环境,包括疏水区和内外亲水环境,因其组分单一,可以方便地进行结构、功能、信号转导等方面的研究,因此可以模拟细胞膜作为研究膜蛋白的有力工具,目前大多是以脂质体形态作为仿生囊泡体系进行这方面研究。     

All-cellulose composite prepared by selective dissolving of fiber surface

An all-cellulose composite was prepared from conventional filter paper by converting a selective dissolved fiber surface into a matrix. The structure and mechanical, thermal, and optical properties of this composite were investigated using X-ray diffraction, a scanning electron microscope, an optical microscope, a tensile test, and dynamic viscoelastic analyses. After optimizing the immersion condition of the filter paper in a solvent, the fibers, with selectively dissolved surfaces, were unified by compression followed by drying. The tensile strength of the composite reached 211 MPa at 25 degrees C, isotropically. This value was comparable or even higher than those of conventional glass-fiber-mat-reinforced composites. The composites possessed a high storage modulus of more than 20 GPa at -150 degrees C, and a storage modulus of the GPa order was maintained up to around 250 degrees C. The good interface is considered to bring optical transparency to this composite. In addition, this composite is composed of sustainable resources and is biodegradable after service, which gives it advantages with regard to disposal, composting, and incineration.     

Glucose sensor for flow injection analysis of serum glucose based on immobilization of glucose oxidase in titania sol-gel membrane

A novel amperometric glucose sensor was constructed by immobilizing glucose oxidase (GOD) in a titania sol-gel film, which was prepared with a vapor deposition method. The sol-gel film was uniform, porous and showed a very low mass transport barrier and a regular dense distribution of GOD. Titania sol-gel matrix retained the native structure and activity of entrapped enzyme and prevented the cracking of conventional sol-gel glasses and the leaking of enzyme out of the film. With ferrocenium as a mediator the glucose sensor exhibited a fast response, a wide linear range from 0.07 to 15 mM. It showed a good accuracy and high sensitivity as 7.2 microA cm(-2) mM(-1). The general interferences coexisted in blood except ascorbic acid did not affect glucose determination, and coating Nafion film on the sol-gel film could eliminate the interference from ascorbic acid. The serum glucose determination results obtained with a flow injection analysis (FIA) system showed an acceptable accuracy, a good reproducibility and stability and indicated the sensor could be used in FIA determination of glucose. The vapor deposition method could fabricate glucose sensor in batches with a very small amount of enzyme.     

The integral membrane protein, ponticulin, acts as a monomer in nucleating actin assembly

Ponticulin, an F-actin binding transmembrane glycoprotein in Dictyostelium plasma membranes, was isolated by detergent extraction from cytoskeletons and purified to homogeneity. Ponticulin is an abundant membrane protein, averaging approximately 10(6) copies/cell, with an estimated surface density of approximately 300 per microns2. Ponticulin solubilized in octylglucoside exhibited hydrodynamic properties consistent with a ponticulin monomer in a spherical or slightly ellipsoidal detergent micelle with a total molecular mass of 56 +/- 6 kD. Purified ponticulin nucleated actin polymerization when reconstituted into Dictyostelium lipid vesicles, but not when a number of commercially available lipids and lipid mixtures were substituted for the endogenous lipid. The specific activity was consistent with that expected for a protein comprising 0.7 +/- 0.4%, by mass, of the plasma membrane protein. Ponticulin in octylglucoside micelles bound F- actin but did not nucleate actin assembly. Thus, ponticulin-mediated nucleation activity was sensitive to the lipid environment, a result frequently observed with transmembrane proteins. At most concentrations of Dictyostelium lipid, nucleation activity increased linearly with increasing amounts of ponticulin, suggesting that the nucleating species is a ponticulin monomer. Consistent with previous observations of lateral interactions between actin filaments and Dictyostelium plasma membranes, both ends of ponticulin-nucleated actin filaments appeared to be free for monomer assembly and disassembly. Our results indicate that ponticulin is a major membrane protein in Dictyostelium and that, in the proper lipid matrix, it is sufficient for lateral nucleation of actin assembly. To date, ponticulin is the only integral membrane protein known to directly nucleate actin polymerization.     

The aerolysin membrane channel is formed by heptamerization of the monomer.

The cytolytic toxin aerolysin has been found to form heptameric oligomers by SDS-PAGE electrophoresis, STEM mass measurements of single oligomers and image analysis of two-dimensional membrane crystals. Two types of crystal, flat sheets and long regular tubes, have been obtained by reconstitution of purified protein and Escherichia coli phospholipids. A noise-filtered image of the best crystalline sheets reveals a structure with 7-fold symmetry containing a central strongly stain-excluding ring that encircles a dark stain-filled channel 17 A in diameter. The ring is surrounded by seven arms each made up of two unequal sized domains. By combining projected views and side-views, a simplified model of the aerolysin channel complex has been constructed. The relevance of this structure to the mode of action of aerolysin is discussed.     

Self-assembling and membrane modifying properties of a lipopeptaibol studied by CW-ESR and PELDOR spectroscopies.

Trichogin GA IV is a short lipopeptaibol antibiotic that is capable of enhancing the transport of small cations through the phospholipid double layer of the membrane. The antibiotic activity of the undecapeptide is thought to be based on either its self-assembling or membrane-modifying property. The chemical equilibrium between self-aggregated and non-aggregated molecular states was studied by CW-ESR spectroscopy using solutions of TOAC nitroxide spin-labelled trichogin analogues in an apolar solvent to mimic the membrane bound state. At room temperature the two different sets of signals observed in the spectrum were attributed to the presence of both monomers and aggregates in the sample. The ESR spectra of the monomeric and aggregated forms were separated and the dependence of the fraction of monomeric peptide molecules on concentration was obtained over the range 5 x 10(-6) to 7 x 10(-4) M. A two-step aggregation mechanism is proposed: dimerization of peptide molecules followed by aggregation of dimers to assemblies of four peptide molecules per aggregate. The equilibrium constants were estimated for both steps. In addition, the lower lifetime limit was determined for dimers and tetramers. It is shown that when the peptide concentration exceeds 10(-5) M. the major part of the peptide molecules in solution has the form of tetrameric aggregates. Independently, the PELDOR technique was used to investigate the concentration dependence of the parameters of the dipole-dipole interaction between spin labels in frozen (77 K] glassy solutions of aggregates of mono-labelled TOAC analogues. The number of molecules in aggregates as well as the frequency and amplitude of PELDOR signal oscillations were found to be concentration independent in the range 5 x 10(-4) to 8 x 10(-3) M. In the frozen glassy solution state, the number of peptide molecules per aggregate was determined to be close to four, which is in agreement with the value obtained for spin-labelled trichogin at room temperature. The present data provide experimental evidence in favour of a self-assembling rather than a membrane-modifying ion conduction mechanism.     

Protein fouling resistant membrane prepared by amphiphilic pegylated polyethersulfone

A mild and facile grafting of poly(ether glycol) methyl ether methacrylate (PEGMA) monomers onto polyethersulfone (PES) was carried out. Then, the PES-g-PEGMA membranes with integrally anisotropic morphology were fabricated through the coupling of non-solvent induced phase inversion and surface segregation. Compared with PES control membrane, the surface hydrophilicity of PES-g-PEGMA membranes was remarkably enhanced due to the drastic enrichment of poly(ethylene glycol) (PEG) segments on the membrane surface; protein adsorption was significantly inhibited due to the hydrogen bonding interactions between hydrophilic groups and water molecules. Ultrafiltration experiments were used to assess the permeability and protein fouling resistance of the PES-g-PEGMA membranes. It was found that the PES-g-PEGMA membranes with higher surface coverage of PEG segments displayed stronger antibiofouling property. Moreover, the stable antibiofouling property for PES-g-PEGMA membranes was acquired due to covalent bonding interactions between hydrophilic PEGMA side chains and PES main chains.     

Identification of the glucose transport protein of the microvillous membrane of human placenta by photoaffinity labelling

The initial step in transfer of glucose from mother to fetus is facilitated diffusion transport across the microvillous membrane of the placental syncytium (1). We have used ³H-cytochalasin B as a photoaffinity label to identify the transport protein involved. Two binding proteins were present, one of which is apparently the glucose transport protein and one of which is actin. The two were identified by competition labeling with D-glucose, and cytochalasin E. They were separated by selective extraction with dimethyl maleic anhydride. The glucose transport protein is apparently a single molecular species of 52,000 molecular weight.