Characterization of inherent curvature in DNA lacking polyadenine runs.

Sequence-directed DNA curvature is most commonly associated with AA dinucleotides in the form of polyadenine runs. We demonstrate inherent curvature in DNA which lacks AA/TT dinucleotides using the criteria of polyacrylamide gel mobility and efficiency of DNA cyclization. These studies are based upon two 21-base pair synthetic DNA fragments designed to exhibit fixed curvature according to deflections made to the helical axis by non-AA dinucleotide stacks. Repeats of these sequences display anomalously slow migration in polyacrylamide gels. Moreover, both sequences describe helical conformations that are closed into circles by DNA ligase at much smaller sizes than is typical of nondeformed DNA. Chemical cleavage of these DNA molecules with hydroxyl radical is also consistent with local variation in helical conformation at specific dinucleotide steps.     

Experimental evaluation of the Liu–Beveridge dinucleotide step model of DNA structure

Methods for predicting DNA curvature have many possible applications. Dinucleotide step models describe DNA shape by characterization of helical twist, deflection angles and the direction of deflection for nearest neighbor base pairs. Liu and Beveridge have extended previous applications of dinucleotide step models with the development and qualitative validation of a predictive method for sequence-dependent DNA curvature (the LB model). We tested whether the LB model accurately predicts experimentally deduced curvature angles and helical repeat parameters for DNA sequences not in its training set, particularly when challenged with quantitative data and subtle sequence phasings. We examined a series of 17 well-characterized DNA sequences to compare electrophoretic and computational results. The LB model is superior to two other models in the prediction of helical repeat parameters. We observed a strong linear correlation between curvature magnitudes predicted using the LB model and those determined by electrophoretic ligation ladder experiments, although the LB model somewhat underestimated apparent curvature. With longer electrophoretic phasing probes the LB model slightly overestimated gel mobility anomalies, with modest deviations in predicted helical repeat parameters. Overall, our analyses suggest that the LB model provides reasonably accurate predictions for the electrophoretic behavior of DNA.     

Principles of sequence-dependent flexure of DNA

The curvature of a bent rod may be defined in several different, but equivalent ways. The best way of describing the curvature of double-helical DNA is by an angle of turning per base step. Curvature comes mainly from the angle of roll between successive base-pairs, and this is defined as positive when the angle opens up on the minor groove side of the bases. DNA forms a plane curve if the roll angle values along the molecule alternate periodically between positive and negative, with a complete period equal to the helical repeat. It is known from studies of crystallized oligomers that the roll angles for particular dinucleotide steps have preferred values, or lie in preferred ranges of values. Therefore the formation of a plane curve will be easier with some base sequences of DNA than with others. We set up a computer algorithm for determining the ease with which DNA of given sequence will adopt a curved form. The algorithm has two different sets of constants: in model 1 the base step parameters come from an inspection of crystallized oligomers, and in model 2 data from a statistical survey of the incidence of dinucleotide steps in a large number of samples of chicken erythrocyte core DNA is incorporated. Both forms of the algorithm successfully locate the dyad of the nucleosome sequence (modulo 10) in a frog gene, and suggest strongly that sequence-dependent flexural properties of DNA play a part in the recognition of binding sites by nucleosome cores.     

Solution measurement of DNA curvature in papillomavirus E2 binding sites

‘Indirect readout’ refers to the proposal that proteins can recognize the intrinsic three-dimensional shape or flexibility of a DNA binding sequence apart from direct protein contact with DNA base pairs. The differing affinities of human papillomavirus (HPV) E2 proteins for different E2 binding sites have been proposed to reflect indirect readout. DNA bending has been observed in X-ray structures of E2 protein–DNA complexes. X-ray structures of three different E2 DNA binding sites revealed differences in intrinsic curvature. DNA sites with intrinsic curvature in the direction of protein-induced bending were bound more tightly by E2 proteins, supporting the indirect readout model. We now report solution measurements of intrinsic DNA curvature for three E2 binding sites using a sensitive electrophoretic phasing assay. Measured E2 site curvature agrees well the predictions of a dinucleotide model and supports an indirect readout hypothesis for DNA recognition by HPV E2.     

The global intrinsic curvature of archaeal and eubacterial genomes is mostly contained in their dinucleotide composition and is probably not an adaptation

Until now, the genomic DNA of all eubacteria analyzed has been hyper-curved, its global intrinsic curvature being higher than that of a random sequence. In contrast, that rule failed for archaea or eukaryotes, which could be either hypo- or hyper-curved. The existence of the rule suggested that, at least for eubacteria, global intrinsic curvature is adaptive. However, the present results from analyzing 21 eubacterial and six archaeal genomes argue against adaptation. First, there are two eubacterial exceptions to the former rule. More significantly, we found that the dinucleotide composition of the genome alone (which lacks all sequence information) is enough to determine the genome curvature. Additional evidence against adaptation came from showing that the global curvature of bacterial genomes could not have evolved under either of two complementary models of curvature selection: (i) that curvature is selected locally from unbiased variability; (ii) that curvature is established globally through the selection of a curvature-altering mutational bias. We found that the observed relationship between curvature and dinucleotide composition is incompatible with model (i). We also found that, contrary to the predictions of model (ii), the dinucleotide compositions of bacterial genomes were not statistically special in their curvature-related properties (when compared to stochastically generated dinucleotide compositions).     

The intrinsic structure and stability of out-of-alternation base pairs in Z-DNA.

Alternating pyrimidine-purine sequences typically form Z-DNA, with the pyrimidines in the anti and purines in the syn conformations. The observation that dC and dT nucleotides can also adopt the syn conformation (i.e. the nucleotides are out-of-alternation) extends the range of sequences that can convert to this left-handed form of DNA. Here, we study the effects of placing two adjacent d(G*C) base pairs as opposed to a single d(G*C) base pair or two d(A*T) base pairs out-of-alternation by comparing the structure of d(m5CGGCm5CG)2with the previously published structures of d(m5CGGGm5CG)*d(m5CGCCm5CG) and d(m5CGATm5CG)2. A high buckle and loss of stacking interactions are observed as intrinsic properties of the out-of-alternation base pairs regardless of sequence and the context of the dinucleotide. From solution titrations, we find that the destabilizing effect of out-of-alternation d(G*C) base pairs are identical whether these base pairs are adjacent or isolated. We can therefore conclude that it is these intrinsic distortions in the structure of the base pairs and not neighboring effects that account for the inability of out-of-alternation base pairs to adopt the left-handed Z conformation.     

Nanoscale mechanical and dynamical properties of DNA single molecules

Experimental evidence suggests DNA mechanical properties, in particular intrinsic curvature and flexibility, have a role in many relevant biological processes. Systematic investigations about the origin of DNA curvature and flexibility have been carried out; however, most of the applied experimental techniques need simplifying models to interpret the data, which can affect the results. Progress in the direct visualization of macromolecules allows the analysis of morphological properties and structural changes of DNAs directly from the digitised micrographs of single molecules. In addition, the statistical analysis of a large number of molecules gives information both on the local intrinsic curvature and the flexibility of DNA tracts at nanometric scale in relatively long sequences. However, it is necessary to extend the classical worm-like chain model (WLC) for describing conformations of intrinsically straight homogeneous polymers to DNA. This review describes the various methodologies proposed by different authors.     

Structure of the DNA Duplex d(ATTAAT)2 with Hoogsteen Hydrogen Bonds

The traditional Watson-Crick base pairs in DNA may occasionally adopt a Hoogsteen conformation, with a different organization of hydrogen bonds. Previous crystal structures have shown that the Hoogsteen conformation is favored in alternating AT sequences of DNA. Here we present new data for a different sequence, d(ATTAAT)₂, which is also found in the Hoogsteen conformation. Thus we demonstrate that other all-AT sequences of DNA with a different sequence may be found in the Hoogsteen conformation. We conclude that any all-AT sequence might acquire this conformation under appropriate conditions. We also compare the detailed features of DNA in either the Hoogsteen or Watson-Crick conformations.     

Computation of DNA backbone conformations

We present an algorithm for the computation of 2'-deoxyribose-phosphodiester backbone conformations that are stereochemically compatible with a given arrangement of nucleic acid bases in a DNA structure. The algorithm involves the sequential computation of 2'-deoxyribose and phosphodiester conformers (collectively referred to as a backbone 'segment'), beginning at the 5'-end of a DNA strand. Computation of the possible segment conformations is achieved by the initial creation of a fragment library, with each fragment representing a set of bond lengths, bond angles and torsion angles. Following exhaustive searching of sugar conformations, each segment conformation is reduced to a single vector, defined by a specific distance, angle and torsion angle, that allows calculation of the O(1)' position. A given 'allowed' conformation of a backbone segment is determined based on its compatibility with the base positions and with the position of the preceding backbone segment. Initial computation of allowable segment conformations of a strand is followed by the determination of continuous backbone solutions for the strand, beginning at the 3'-end. The algorithm is also able to detect repeating segment conformations that arise in structures containing geometrically repeating dinucleotide steps. To illustrate the utility and properties of the algorithm, we have applied it to a series of experimental DNA structures. Regardless of the conformational complexity of these structures, we are able to compute backbone conformations for each structure. Hence, the algorithm, which is currently implemented within a new computer program NASDAC (Nucleic Acids: Structure, Dynamics and Conformation), should have generally applicability to the computation of DNA structures.     

Environmental influences on DNA curvature

DNA curvature plays an important role in many biological processes. To study environmental influences on DNA curvature we compared the anomalous migration on polyacrylamide gels of ligation ladders of 11 specifically-designed oligonucleotides. At low temperatures (25 degrees C and below) most of the sequences exhibited a degree of anomalous migration. Increased temperature had a significant effect on the anomalous migration (curvature) of some sequences but limited effects on others; at 50 degrees C only 1 sequence migrated anomalously. Mg2+ had a strong influence on the migration of certain sequences, whilst spermine enhanced the anomalous migration of a different set of sequences. Sequences with a GGC motif exhibited greater curvature than predicted by the presently-used angles for the nearest-neighbour wedge model and are especially sensitive to Mg2+. The data have implications for models for DNA curvature and for environmentally-sensitive DNA conformations in the regulation of gene expression.     

The conformation and stability of ribonucleic acids: modeling base sequence effects in double stranded helices

Base sequence effects within double stranded RNA oligomers of A and Z conformations have been studied by molecular modeling using a methodological approach specifically adapted to nucleic acids. Calculations on symmetric oligomers having homonucleotide or dinucleotide repeating base sequences show that sequence changes can produce modifications in overall conformation, influence the degree of internal hydrogen bonding and strongly affect stability.     

Theoretical model of the B-Z transition in DNA with an arbitrary sequence

A statistical-mechanical model is suggested that makes it possible to describe the B-Z transition in DNA with an arbitrary sequence of nucleotides. The key point consists in allowance for the fact that each base pair can assume one of the two states with different energies. One of these states corresponds to the standard Z-form with purines in the syn conformation and pyrimidines in the anti conformation. However, in natural DNA sequences such standard base-pair conformations should be interrupted by energetically unfavorable conformations (syn for pyrimidines and anti for purines). Open regions and cruciform structures are also allowed for in the model. The probabilities of formation of the Z-form stretches, open regions and cruciform structures have been calculated for different values of parameters for pBR322 and pAO3 DNA.     

Conformational characteristics and correlations in crystal structures of nucleic acid oligonucleotides: evidence for sub-states

Sugar phosphate backbone conformations are a structural element inextricably involved in a complete understanding of specific recognition nucleic acid ligand interactions, from early stage discrimination of the correct target to complexation per se, including any structural adaptation on binding. The collective results of high resolution DNA, RNA and protein/DNA crystal structures provide an opportunity for an improved and enhanced statistical analysis of standard and unusual sugar-phosphate backbone conformations together with corresponding dinucleotide sequence effects as a basis for further exploration of conformational effects on binding. In this study, we have analyzed the conformations of all relevant crystal structures in the nucleic acids data base, determined the frequency distribution of all possible epsilon, zeta, alpha, beta and gamma backbone angle arrangements within four nucleic acid categories (A-RNA and A-DNA, free and bound B-DNA) and explored the relationships between backbone angles, sugar puckers and selected helical parameters. The trends in the correlations are found to be similar regardless of the nucleic acid category. It is interesting that specific structural effects exhibited by the different unusual backbone sub-states are in some cases contravariant. Certain alpha/gamma changes are accompanied by C3' endo (north) sugars, small twist angles and positive values of base pair roll, and favor a displacement of nucleotide bases towards the minor groove compared to that of canonical B form structures. Unusual epsilon/zeta combinations occur with C2' (south) sugars, high twist angles, negative values of base pair roll, and base displacements towards the major groove. Furthermore, any unusual backbone correlates with a reduced dispersion of equilibrium structural parameters of the whole double helix, as evidenced by the reduced standard deviations of almost all conformational parameters. Finally, a strong sequence effect is displayed in the free oligomers, but reduced somewhat in the ligand bound forms. The most variable steps are GpA and CpA, and, to a lesser extent, their partners TpC and TpG. The results provide a basis for considering if the variable and non-variable steps within a biological active sequence precisely determine morphological structural features as the curvature direction, the groove depth, and the accessibility of base pair for non covalent associations.     

Effects of DNA looping on pyrimidine dimer formation.

We have assessed the effects of DNA curvature on pyrimidine dimer (PD) formation by examining the pattern of PD formation in DNA held in a loop by lambda repressor. The loop region was composed of diverse DNA sequences such that potential PD sites occurred throughout the loop. PD formation in the loop occurred with peaks at approximately 10 base intervals, just 3' of where the bending of the DNA was inferred to be toward the major groove. This relationship between the peaks and the DNA curvature is essentially identical to that observed in the nucleosome. This indicates that DNA curvature is the major source of the periodicity of PD formation in the nucleosome, and supports an earlier model of the conformation of nucleosomal DNA based on PD formation. DNA loops containing diverse sequences should be of general value for assessing the effects of DNA curvature on DNA modification by other agents used to probe DNA-protein interactions and DNA conformation.     

Sequence periodicity in nucleosomal DNA and intrinsic curvature

Background

Most eukaryotic DNA contained in the nucleus is packaged by wrapping DNA around histone octamers. Histones are ubiquitous and bind most regions of chromosomal DNA. In order to achieve smooth wrapping of the DNA around the histone octamer, the DNA duplex should be able to deform and should possess intrinsic curvature. The deformability of DNA is a result of the non-parallelness of base pair stacks. The stacking interaction between base pairs is sequence dependent. The higher the stacking energy the more rigid the DNA helix, thus it is natural to expect that sequences that are involved in wrapping around the histone octamer should be unstacked and possess intrinsic curvature. Intrinsic curvature has been shown to be dictated by the periodic recurrence of certain dinucleotides. Several genome-wide studies directed towards mapping of nucleosome positions have revealed periodicity associated with certain stretches of sequences. In the current study, these sequences have been analyzed with a view to understand their sequence-dependent structures.

Results

Higher order DNA structures and the distribution of molecular bend loci associated with 146 base nucleosome core DNA sequence from C. elegans and chicken have been analyzed using the theoretical model for DNA curvature. The curvature dispersion calculated by cyclically permuting the sequences revealed that the molecular bend loci were delocalized throughout the nucleosome core region and had varying degrees of intrinsic curvature.

Conclusions

The higher order structures associated with nucleosomes of C.elegans and chicken calculated from the sequences revealed heterogeneity with respect to the deviation of the DNA axis. The results points to the possibility of context dependent curvature of varying degrees to be associated with nucleosomal DNA.

     

Intrinsic conformational properties of deoxyribonucleosides: implicated role for cytosine in the equilibrium among the A, B, and Z forms of DNA.

Structural properties of biomolecules are dictated by their intrinsic conformational energetics in combination with environmental contributions. Calculations using high-level ab initio methods on the deoxyribonucleosides have been performed to investigate the influence of base on the intrinsic conformational energetics of nucleosides. Energy minima in the north and south ranges of the deoxyribose pseudorotation surfaces have been located, allowing characterization of the influence of base on the structures and energy differences between those minima. With all bases, chi values associated with the south energy minimum are lower than in canonical B-DNA, while chi values associated with the north energy minimum are close to those in canonical A-DNA. In deoxycytidine, chi adopts an A-DNA conformation in both the north and south energy minima. Energy differences between the A and B conformations of the nucleosides are <0.5 kcal/mol in the present calculations, except with deoxycytidine, where the A form is favored by 2.3 kcal/mol, leading the intrinsic conformational energetics of GC basepairs to favor the A form of DNA by 1.5 kcal/mol as compared with AT pairs. This indicates that the intrinsic conformational properties of cytosine at the nucleoside level contribute to the A form of DNA containing predominately GC-rich sequences. In the context of a B versus Z DNA equilibrium, deoxycytidine favors the Z form over the B form by 1.6 kcal/mol as compared with deoxythymidine, suggesting that the intrinsic conformational properties of cytosine also contribute to GC-rich sequences occurring in Z DNA with a higher frequency than AT-rich sequences. Results show that the east pseudorotation energy barrier involves a decrease in the furanose amplitude and is systematically lower than the inversion barrier, with the energy differences influenced by the base. Energy barriers going from the south (B form) sugar pucker to the east pseudorotation barrier are lower in pyrimidines as compared with purines, indicating that the intrinsic conformational properties associated with base may also influence the sugar pseudorotational population distribution seen in DNA crystal structures and the kinetics of B to A transitions. The present work provides evidence that base composition, in addition to base sequence, can influence DNA conformation.     

In vitro selection of DNAs with an increased propensity to form small circles

A protocol was devised to select for DNA molecules that efficiently form circles from a library of 126 base pair DNAs containing 90 randomized base pairs. After six rounds of selection, individual molecules from the library showed 20‐ to 100‐fold greater j‐factors compared with the starting library, validating the selection protocol. High‐throughput sequencing revealed a sinusoidal pattern of enrichment and de‐enrichment of A/T dinucleotides in the random region with a 10.4 base pair period associated with the helicity of DNA. A similar, but more moderate pattern of C/G dinucleotides was offset by precisely half a helical turn. While C/G dinucleotide enrichments were evenly distributed, A/T dinucleotide enrichments displayed a preference to cluster in individual DNA molecules. The most highly enriched 10 base pair sequences in the random region contained adjacent blocks of A/T and C/G trinucleotides present in some, but not all, rapidly cyclizing molecules. The phased dinucleotide enrichments closely match those present in accurately mapped yeast nucleosomes, confirming the importance of DNA bending in nucleosome formation. However, at certain sites the nucleosomal DNAs show dinucleotide enrichments that differ substantially from the cyclization data. These discrepancies can often be correlated with sequence specific contacts that form between histones and DNA. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 303–320, 2015.     

The effect of intrinsic curvature on supercoiling: Predictions of elasticity theory

Elasticity theory of naturally curved rods is employed to study the effects of intrinsic curvature on the properties of the equilibrium conformations of supercoiled DNA. The results stand in sharp contrast to those obtained when the molecule is viewed as being straight in its relaxed form. Starting from very fundamental principles of the theory, we show that the torsion of an open segment with a curved duplex axis can vary when the temperature, and along with it, the intrinsic twist is changed. Conversely, an imposed helicity, such as might be associated with binding to a histone, can change the intrinsic twist. It is also shown that another consequence of the presence of naturally curved sequences is that the twist density will, in general, vary with position along the chain in all equilibrium states. Then portions of the molecule will be more or less susceptible to interaction with other agents sensitive to such a variation. Finally, some closed equilibrium global structures uniquely associated with intrinsic curvature are discussed. © 1993 John Wiley & Sons, Inc.     

Sequence dependent hydration of DNA

The transitions between the different helical conformations of DNA depend on the base sequence and the ambient conditions such as humidity and counter-ion concentration. In this study energy minimization techniques have been used to locate water molecule sites around nucleotides especially those which form hydrogen bonds between two or more nucleotide atoms and thus form solvent mediated bridges. We have studied several sequences and find that those which are known not to exist in the low hydration ‘A’ form have very similar number of bridging sites in both ‘A’ and ‘B’ conformations. Those sequences which are found in the ‘A’ conformation have considerably more bridging sites in this low hydration form than in the ‘B’ conformation. Sequence related solvent effects for a given conformation have also been analysed.