Amplified detection of nucleic acid by G-quadruplex based hybridization chain reaction

A protein-free, isothermal, self-amplified nucleic acid sensing system which was a G-quadruplex integrated hybridization chain reaction (GQ-HCR) system was developed. The G-quadruplex was closed two-thirds in the loop and one-third in the stem of one of the GQ-HCR hairpin probes. In the absence of the target molecule, the GQ-HCR probes stayed as inactive meta-stable hairpin structures and the G-quadruplex was inert. Reversely, the GQ-HCR probes could be cross-opened to start a hybridization chain reaction and the closed G-quadruplex could be released to be free when the GQ-HCR probes came across the target molecule. The GQ-HCR nucleic acid sensing system could detect as low as 7.5nM ssDNA or RNA by the colorimetric method and 4nM ssDNA by the fluorometric method. Less than 10 copies of dsDNA template could also be detected when PCR was combined with the GQ-HCR system (PCR+GQ-HCR). Because of these advantages, the GQ-HCR system was also studied for application in visual chip detection to obtain a satisfactory repeatable and specific result.     

Interference-based detection of nucleic acid targets on optically coated silicon

Sequence-specific detection of polynucleotides typically requires modified reporter probes that are labeled with radioactive, fluorescent, or luminescent moieties. Although these detection methods are capable of high sensitivity, they require instrumentation for signal detection. In certain settings, such as clinical point of care, instrumentation might be impractical or unavailable. Here we describe a detection approach in which formation of a nucleic acid hybrid is enzymatically transduced into a molecular thin film that can be visually detected in white light. The system exploits a flat, optically coated silicon-based surface to which capture oligonucleotides are covalently attached. The optimized system is capable of detection of nucleic acid targets present at sub-attomole levels. To supplement visual detection, signals can be quantitated by a charge-coupled device. The design and composition of the optical surface, optimization of immobilization chemistry for attachment of capture probes, and characterization of the efficiency of the hybridization process are presented. We describe the application of this system to detection of a clinically relevant target, the mecA gene present in methicillin-resistant Staphylococcus aureus.     

Detection of toxic chemicals with high sensitivity by measuring the quantity of induced P450 mRNAs based on surface plasmon resonance

In this study we describe a novel sensor system to detect toxic chemicals based on measurement of the quantity of Saccharomyces cerevisiae P450 mRNAs induced by them. Detection was conducted using a flow-injection-type sensor system based on surface plasmon resonance (SPR). The DNA and peptide nucleic acid (PNA) probes containing a complementary sequence to a part of P450 mRNA were immobilized on the sensor chip and the P450 mRNAs hybridized to the probes were quantified. We succeeded in detecting 10 ng/L (10 ppt) of atrazine using both DNA and PNA probes. Using this sensor system, we were able to detect bisphenol A in addition to atrazine. Furthermore, we achieved higher sensitivity by amplifying the target P450 mRNA based on nucleic acid sequence-based amplification (NASBA). This method allows for sensitive, rapid, and easy detection of some toxic chemicals.     

Optical fiber-based sensors: application to chemical biology

Optical fibers have been used to develop sensors based on nucleic acids and cells. Sensors employing DNA probes have been developed for various genomics applications and microbial pathogen detection. Live cell-based sensors have enabled the monitoring of environmental toxins, and have been used for fundamental studies on populations of individual cells. Both single-core optical fiber sensors and optical fiber sensor arrays have been used for sensing based on nucleic acids and live cells.     

Developing nucleic acid-based electrical detection systems

Development of nucleic acid-based detection systems is the main focus of many research groups and high technology companies. The enormous work done in this field is particularly due to the broad versatility and variety of these sensing devices. From optical to electrical systems, from label-dependent to label-free approaches, from single to multi-analyte and array formats, this wide range of possibilities makes the research field very diversified and competitive. New challenges and requirements for an ideal detector suitable for nucleic acid analysis include high sensitivity and high specificity protocol that can be completed in a relatively short time offering at the same time low detection limit. Moreover, systems that can be miniaturized and automated present a significant advantage over conventional technology, especially if detection is needed in the field. Electrical system technology for nucleic acid-based detection is an enabling mode for making miniaturized to micro- and nanometer scale bio-monitoring devices via the fusion of modern micro- and nanofabrication technology and molecular biotechnology. The electrical biosensors that rely on the conversion of the Watson-Crick base-pair recognition event into a useful electrical signal are advancing rapidly, and recently are receiving much attention as a valuable tool for microbial pathogen detection. Pathogens may pose a serious threat to humans, animal and plants, thus their detection and analysis is a significant element of public health. Although different conventional methods for detection of pathogenic microorganisms and their toxins exist and are currently being applied, improvements of molecular-based detection methodologies have changed these traditional detection techniques and introduced a new era of rapid, miniaturized and automated electrical chip detection technologies into pathogen identification sector. In this review some developments and current directions in nucleic acid-based electrical detection are discussed.     

Highly sensitive optical chip immunoassays in human serum

Over the past decade the ability of refractometric optical sensors to quantitatively measure a wide range of biomolecules has been demonstrated. These include proteins, nucleic acids, microorganisms, and in competitive formats small molecules such as drugs and pesticides. Furthermore, by using high refractive index nanoparticles to amplify the biomolecular binding signal, sensitivities approaching those of well established diagnostic assays have been achieved. However, to date it has not been possible to show rapid detection of analytes in complex bodily fluids such as serum, in a one-step procedure, due to the interference resulting from non-specific binding (NSB) to the sensor surface. We have carried out preliminary work on the control of interference due to NSB using an optical chip based on the Hartman interferometer. This interferometer configuration employs a reference sensing region that can be functionalized separately from the specific sensing region. Optical chips were stored dry after surface functionalization, and rehydrated in serum. The observed level of background drift in serum was reduced by an order of magnitude when an exposed reference was used, compared to a reference which was blind to the sample. An additional 70% reduction in signal drift in serum was achieved by controlling the surface chemistry of the optical chip using a biotin-poly(ethylene glycol) (PEG) blocking agent. This functionalization procedure was combined with a sandwich assay using gold nanoparticles to develop a one-step assay for human chorionic gonadotropin (hCG) in human serum with a detection limit of 0.1 ng/ml for a 35 min assay.     

A protocol for the in vitro selection of specific oligonucleotide probes for high-resolution DNA typing

The confident discrimination of nucleic acids that share a high degree of sequence identity is the major obstacle for the widespread applicability of multiplex DNA-based techniques. This diagnostic uncertainty originates in the insufficient specificity of hybridization, allowing cross-hybridization between unwanted probe-target combinations. Starting from a random mixture of oligonucleotides, we describe a protocol to selectively amplify the probes that bind to the target but not to the similar, unintended targets. The procedure involves five forward hybridizations to generate pools of probes with significant affinity, but not necessarily specificity, for the target. Specificity is then achieved during subtractive hybridization steps, where only probes having differential diagnostic performance are retained. Iterative hybridizations, cloning, sequencing and testing of the performance of selected probes can all be fully automated. Eight weeks are required for the full completion of a project composed of 40 probe-target pairs, even when targets share as much as 87% of sequence identity. While alternative, computer-assisted, rational oligonucleotide design may produce an uncertain outcome, the present protocol generates robust and specific probes suitable for a variety of multiplex, nucleic acid-based detection/typing platforms.     

Recent progress on performances and mechanisms of carbon dots for gas sensing

Carbon dots (CDs), as an attractive zero-dimensional carbon nanomaterial with unique photoluminescent merits, have recently exhibited significant application potential in gas sensing as a result of their excellent optical/electronic characteristics, high chemical/thermal stability, and tunable surface states. CDs exhibit strong light absorption in the ultraviolet range and tunable photoluminescence characteristics in the visible range, which makes CDs an effective tool for optical sensing applications. Optical gas sensor based on CDs have been investigated, which generally responds to the target gas by corresponding changes in optical absorption or fluorescence. Moreover, electrical gas sensor and quartz crystal microbalance sensor whose sensing layer involves CDs have also been designed. Electrical gas sensor exhibits an increase or a decrease in electrical current, capacitance, or conductance once exposed to the target gas. Quartz crystal microbalance sensor responds to the target gas with a frequency shift. CDs greatly promote the absorption of the target gas and improve the sensitivity of both sensors. In this review, we aim to summarize different types of gas sensors involving CDs, and sensing performances of these sensors for monitoring diverse gases or vapors, as well as the mechanisms of CDs in different types of sensors. Moreover, this review provides the prospect of the potential development of CDs based gas sensors.     

A rapid, sensitive, and selective bioluminescence resonance energy transfer (BRET)-based nucleic acid sensing system

Here we report the design of a bioluminescence resonance energy transfer (BRET)-based sensing system that could detect nucleic acid target in 5 min with high sensitivity and selectivity. The sensing system is based on adjacent binding of oligonucleotide probes labeled with Renilla luciferase (Rluc) and quantum dot (Qd) on the nucleic acid target. Here Rluc, a bioluminescent protein that generates light by a chemical reaction, is employed as an energy donor, and a quantum dot is used as an energy acceptor. Bioluminescence emission of Rluc overlaps with the Qd absorption whereas the emission of Qd is shifted from the emission of Rluc allowing for monitoring of BRET. In the presence of target, the labeled probes bind adjacently in a head-to-head fashion leading to BRET from Rluc to Qd upon addition of a substrate coelenterazine. The sensing system could detect target nucleic acid in buffer as well as in Escherichia coli cellular matrix in 5 min with a detection limit of 0.54 pmol. The ability to detect target nucleic acid rapidly in a cellular matrix with high sensitivity will prove highly beneficial in biomedical and environmental applications.     

Modeling single cell antibody excretion on a biosensor

We simulated, using Comsol Multiphysics, the excretion of antibodies by single hybridoma cells and their subsequent binding on a surface plasmon resonance imaging (SPRi) sensor. The purpose was to confirm that SPRi is suitable to accurately quantify antibody (anti-EpCAM) excretion. The model showed that antibody loss by diffusion away from the sensor was less than 1%. Unexpectedly, more than 99% of the excreted antibodies were captured on the sensor. These data prove the remarkable phenomenon that the SPRi output of cellular antibody excretion and its subsequent binding, performed under the conditions described here, is directly usable for quantification of single cell antibody production rates.     

Preparation and evaluation of a peptide nucleic acid gene chip system associated with surface plasmon resonance

The aim of this study was to construct a gene chip system based on a surface plasmon resonance technique, where peptide nucleic acid (PNA) oligomers are used as probes. Since the self-assembled monolayer (SAM) technology offers good control at the molecular level, we prepared 2D surface chemistry via SAM for probe attachments. PNA, which was designed according to the bioinformatics, was immobilized on the SAM-modified chip, and subsequently, relevant parameters of the experiment were ensured and optimized. Our results suggest that the ion strength and pH value of the buffer solution do not play significant roles in PNA or its complementary strand hybridization. The PNA probe binds to its complementary nucleic acid strand with a higher sensitivity and specificity compared to those of a traditional DNA probe. The PNA probe combined with surface plasmon resonance (SPR) technology has the benefits of being a label-free and in-real time monitor, as well as having improved hybridization and stability efficiency, which highlight the PNA gene chip detection system as a promising biosensor for clinical applications.     

Substrate Mode-Integrated SPR Sensor

We present the design, implementation and characterisation of an integrated surface plasmon resonance (SPR) biosensor chip involving diffractive optical coupling elements avoiding the need of prism coupling. The integrated sensor chip uses the angular interrogation principle and includes two diffraction gratings and the SPR sensing zone. The theoretical design is presented as well as the fabrication process. Experimental results (response of a reference water droplet and phosphate-buffered saline/water kinetic) are presented and compared with those obtained with the classical Kretschmann prism coupling setup. We believe that this prism-free architecture is perfectly suitable for low-cost and reproducible SPR biochemical sensor chips since the sensing zone can be functionalised as any other one.     

Chemical probes for profiling fatty acid-associated proteins in living cells

Chemical probes appended with reactive electrophiles afford powerful tools for profiling discrete protein families in living cells. Herein, we have synthesized cell-permeable chemical probes that target fatty acid-associated proteins. These fatty acid-based chemical probes contain acyloxymethylketone or fluorophosphonate functional groups and an alkyne click chemistry tag for visualization of covalently modified proteins by in-gel fluorescence scanning. Our fatty acid-based chemical probe affords new tools to evaluate the activity/expression of lipid-associated proteins that should facilitate their functional characterization and inhibitor discovery.     

Smart Nanocarriers for the Delivery of Nucleic Acid-Based Therapeutics: A Comprehensive Review

Nucleic acid-based therapies are promising therapeutics for the treatment of several systemic disorders, and they offer an exciting opportunity to address emerging biological challenges. The scope of nucleic acid-based therapeutics in the treatment of multiple disease states including cancers has been widened by recent progress in Ribonucleic acids (RNA) biology. However, cascades of systemic and intracellular barriers, including rapid degradation, renal clearance, and poor cellular uptake, hinder the clinical effectiveness of nucleic acid-based therapies. These barriers can be circumvented by utilizing advanced smart nanocarriers that efficiently deliver and release the encapsulated nucleic acids into the target tissues. This review describes the current status of clinical trials on nucleic acid-based therapeutics and highlights representative examples that provide an overview on the current and emerging trends in nucleic acid-based therapies. A better understanding of the design of advanced nanocarriers is essential to promote the translation of therapeutic nucleic acids into a clinical reality.     

Efficient primer design algorithms

MOTIVATION: Primer design involves various parameters such as string-based alignment scores, melting temperature, primer length and GC content. This entails a design approach from multicriteria decision making. Values of some of the criteria are easy to compute while others require intense calculations. RESULTS: The reference point method was found to be tractable for trading-off between deviations from ideal values of all the criteria. Some criteria computations are based on dynamic programs with value iteration whose run time can be bounded by a low-degree polynomial. For designing standard PCR primers, the scheme offers in a relative gain in computing speed of up to 50: 1 over ad-hoc computational methods. Single PCR primer pairs have been used as model systems in order to simplify the quantization of the computational acceleration factors. The program has been structured so as to facilitate the analysis of large numbers of primer pairs with minor modifications. The scheme significantly increases primer design throughput which in turn facilitates the use of oligonucleotides in a wide range of applications including: multiplex PCR and other nucleic acid-based amplification systems, as well as in zip code targeting, oligonucleotide microarrays and nucleic acid-based nanoengineering.     

Microgravimetric DNA sensor based on quartz crystal microbalance: comparison of oligonucleotide immobilization methods and the application in genetic diagnosis

We report on the study of immobilization DNA probes onto quartz crystal oscillators by self-assembly technique to form variety types of mono- and multi-layered sensing films towards the realization of DNA diagnostic devices. A 18-mer DNA probe complementary to the site of genetic beta-thalassaemia mutations was immobilized on the electrodes of QCM by covalent bonding or electrostatic adsorption on polyelectrolyte films to form mono- or multi-layered sensing films by self-assembled process. Hybridization was induced by exposure of the QCMs immobilized with DNA probe to a test solution containing the target nucleic acid sequences. The kinetics of DNA probe immobilization and hybridization with the fabricated DNA sensors were studied via in-situ frequency changes. The characteristics of QCM sensors containing mono- or multi-layered DNA probe constructed by direct chemical bonding, avidin-biotin interaction or electrostatic adsorption on polyelectrolyte films were compared. Results indicated that the DNA sensing films fabricated by immobilization of biotinylated DNA probe to avidin provide fast sensor response and high hybridization efficiencies. The effects of ionic strength of the buffer solution and the concentration of target nucleic acid used in hybridization were also studied. The fabricated DNA biosensor was used to detect a set of real samples. We conclude that the microgravimetric DNA sensor with its direct detection of amplified products provide a rapid, low cost and convenient diagnostic method for genetic disease.     

Spectral surface plasmon resonance imaging for the detection of clenbuterol via three-dimensional immobilization of bioprobes

A method of immobilizing clenbuterol (CLEN) on the sensor chip for spectral surface plasmon resonance imaging (SPRi) was experimentally investigated. The bioprobes on the sensor chip were prepared by immobilizing bovine serum albumin (BSA) protein and conjugating CLEN molecules to BSA, which provides more active points and free orientations for specific binding. The calibration curve showed that the wavelength resonance shift decreased as the concentration of CLEN analyte increased, consistent with the inhibition principle. The limit of detection (LOD) was estimated to be 6.32 μg/ml. This method proved to be highly specific, high throughput, label free, and operationally convenient.     

基于纳米金复合探针的基因芯片膜转印检测法

建立了一种基于纳米金复合探针的基因芯片膜转印核酸检测新方法。首先,用纳米金颗粒同时标记检测探针P2和两种长短不同且生物素化的信号探针 (T10,T40),其中检测探针与靶DNA 5￠端互补,两种信号探针起信号放大作用。当靶DNA分子存在时,芯片表面捕捉探针P1 (与靶DNA分子3￠端互补) 通过碱基互补配对原则结合靶DNA分子,将其固定于芯片上,同时检测探针通过与靶DNA 5￠端互补配对将纳米金复合探针结合于芯片表面,结果在芯片表面形成“三明治”结构,后通过链霉亲和素-生物素反应,使芯片表面对应有靶DNA分子的部位结合上碱性磷酸酶,最后利用BCIP/NBT显色系统使芯片表面信号结果镜面转印至尼龙膜表面。当检测探针和信号探针摩尔比为1∶10,T10和T40摩尔比为9:1时可以检测1 pmol/L合成靶DNA分子或0.23 pmol/L结核分枝杆菌16S rDNA PCR扩增产物,检测结果通过普通的光学扫描仪读取或肉眼直接判读信号有无。本芯片检测系统灵敏度高,操作方法简单、快速,不需要特殊仪器设备,在生物分子的检测方面具有较高的应用价值。     

Hybridization properties of long nucleic acid probes for detection of variable target sequences,and development of a hybridization prediction algorithm

One of the main problems in nucleic acid-based techniques for detection of infectious agents, such as influenza viruses, is that of nucleic acid sequence variation. DNA probes, 70-nt long, some including the nucleotide analog deoxyribose-Inosine (dInosine), were analyzed for hybridization tolerance to different amounts and distributions of mismatching bases, e.g. synonymous mutations, in target DNA. Microsphere-linked 70-mer probes were hybridized in 3M TMAC buffer to biotinylated single-stranded (ss) DNA for subsequent analysis in a Luminex® system. When mismatches interrupted contiguous matching stretches of 6 nt or longer, it had a strong impact on hybridization. Contiguous matching stretches are more important than the same number of matching nucleotides separated by mismatches into several regions. dInosine, but not 5-nitroindole, substitutions at mismatching positions stabilized hybridization remarkably well, comparable to N (4-fold) wobbles in the same positions. In contrast to shorter probes, 70-nt probes with judiciously placed dInosine substitutions and/or wobble positions were remarkably mismatch tolerant, with preserved specificity. An algorithm, NucZip, was constructed to model the nucleation and zipping phases of hybridization, integrating both local and distant binding contributions. It predicted hybridization more exactly than previous algorithms, and has the potential to guide the design of variation-tolerant yet specific probes.